Professional Documents
Culture Documents
Latihan 18917
Latihan 18917
Diagram 1.1
……………………………………………………………………………………………
[1 mark/markah]
(b) What is the weight of the banner?
[2 marks / markah]
In the space below, draw the scale drawing of the triangle of forces to determine the
value of T. Label the forces involved. [ use scale 1 cm : 100 N ]
T= …………………..cm
= …………………..N
[3 marks/ markah]
(d) The rope used to hang the banner is not strong enough and break after a few days. In
Diagram 1.2, sketch the velocity – time graph when the banner falls down after the
rope is break. Assume that the air resistance is negligible.
Velocity/ms-1
Time / s
Diagram 1.2 Masa/ s
[1 mark/ markah]
2 Diagram 2.1 shows a spring in a toy gun is compressed by a rubber bullet and the horizontal
distance, s1 travelled by the rubber bullet after the force used to compress the spring is
released.
Spring P
s1
Diagram 2.1
Diagram 5.2 shows a spring in a toy gun is compressed by a rubber bullet and the horizontal
distance, s2 travelled by the rubber bullet after the force used to compress the spring is
released.
Spring Q
s2
Diagram 2.2
The spring constant of Spring P and Spring Q are 200 Nm-1 and 400 Nm-1 respectively.
(a) Name the type of energy possess by the spring when it is being compressed.
…………………………………………………………………………………………
[1 mark]
(b) Observe Diagram 2.1 and Diagram 2.2.
.
(i) Compare the thickness of the spring
……………………………………………………………………………………
[1 mark]
(ii) Compare the length of spring after being compressed.
……………………………………………………………………………………
[1 mark]
(iii) Compare the horizontal distance, s travelled by the rubber bullet.
……………………………………………………………………………………
[1 mark]
(iv) Compare the spring constant of the spring.
……………………………………………………………………………………
[1 mark]
(c) Based on the answers in 5 (b),
(i) state the relationship between the thickness of the spring and the spring constant
……………………………………………………………………………………
[1 mark]
(ii) state the relationship between the horizontal distance and the spring constant
……………………………………………………………………………………
[1 mark]
(d) Based on Diagram 5.1, what happens to the horizontal distance of the rubber bullet if
Spring P is replaced by a longer spring but other physical properties are the same.
…………………………………………………………………………………………
[1 mark]