Professional Documents
Culture Documents
7 Trouble Shooting Guide: 7.1. How To Identify SOS Blinking Signal
7 Trouble Shooting Guide: 7.1. How To Identify SOS Blinking Signal
By using this tool (V1 board), the indication of pulse is shown to the blinking of red LED.
(Pluse High = LED light, Pulse Low = LED light off)
Tool name Part number Supply period Supply route
V1 board TNPA3199 until end of DEC ./2005 Normal spare part route (chargeable)
Lead Wire (D8-V34) TXJV340MMS until end of DEC ./2005 Normal spare part route (chargeable)
[How to check]
Connect the V1 board to D8 connector on D board, and turn on the power (SS34) of PDP module.
If power is shut down by protection circuit, the red LED of V1 board will be shown as blinking.
(Refer to Fig. A)
(If the unit keeps power on, the green LED of V1 board will be lighting.)