Professional Documents
Culture Documents
Infinity-Box Installation Manual en
Infinity-Box Installation Manual en
W2K/XP/Vista, manually
Note: "x:" means drive where Infinity-Box was installed (f.e. "C:" or "D:")
1. Run: x:\Program Files\InfinityBox\Drivers\Box\e-gate_W2k_XP_Vista\Setup_W2k_XP.exe or
Setup_Vista.exe
2. Connect box (dongle) to PC USB port, your system have three new devices:
1. e-gate Virtual Reader Enumerators -> e-gate Virtual Reader Enumerator
2. Smart card readers -> e-gate USB Smart card reader
3. e-gate USB Smart Cards -> e-gate USB Smart Card
3. Connect box to PC USB port and select drivers: x:\Program Files\InfinityBox\Drivers\Box\FTDI
Windows 7, manually
Note: "x:" means drive where Infinity-Box was installed (f.e. "C:" or "D:")
1. Connect box (dongle) to PC USB port
2. Install drivers from folder: x:\Program Files\InfinityBox\Drivers\Box\e-gate_Vista_W7\
2.1. go to "Device Manager"
2.2. press right mouse button at "e-gate USB Smart Cards" - "Cyberflex e-gate" and select "Update Driver Software..."
2.3. select "Browse my computer for driver software"
2.4. select folder with drivers "C:\Program Files\InfinityBox\Drivers\box\e-gate_Vista_W7" and press "Next"
3. Your system have new device:
1. Smart card readers -> e-gate Smart Card
W98/ME, manually
Open "Device Manager" and check that the next devices exist in system:
Note 1: COM port No can be different than on picture above. Please, remember COM port No in your system and select it
when you start Infinity-Box software.
Note 2: latest FTDI drivers: http://ftdichip.com/Drivers/VCP.htm