Professional Documents
Culture Documents
Materials:: A FREE Pattern Courtesy of Twinfinite Fun
Materials:: A FREE Pattern Courtesy of Twinfinite Fun
Materials:
- ½ yard fabric
- Velcro or snaps
Instructions:
7. Now take two of the panels and pin right sides together. Sew along one of the curved sides.
Repeat with two more panels. (Diagram 4)
8. Open up both sets of panels and pin together, carefully matching up seams. Sew together
to create the dome of the hat.
9. Repeat steps 7 and 8 if using a lining.
10. Fold the strap pieces over onto themselves and sew along the open edge and one bottom
edge. Turn inside out using a pencil or safety pin. (Diagrams 5-6)
11. Attach one side of Velcro or snap to each strap and set aside. (Diagram 7)
12. To put it all together turn the dome of hat upside down and pin the brim all the way
around, matching up right sides. (If using a lining add it now, with right side out.) Make sure
the brim’s seams hit on the sides of the hat since this is where we will attach the neck
straps. (Diagram 8)
13. Insert straps between the brim and the lining to secure the open edge. Make sure the
Velcro or snaps line up on the right side! Pin in place.
14. Sew along the inside of the hat. Turn inside out and see your creation! (You can also add a
button or bow on the top of the hat, or add a trim around the edge of the brim to add a
little something extra!) (see Diagrams 9-10)
Diagram 1 Diagram 2
Diagram 3 Diagram 4
Diagram 5 Diagram 6
Diagram 7 Diagram 8
Diagram 9 Diagram 10
Pattern Templates: