Professional Documents
Culture Documents
Bolt Analysis
Bolt Analysis
Bolt Analysis
Designed by: Fareed Date: 20JULY98 Checked by: MIP Date: 20JULY98 Sheet No. 1
Project: Sohaiba Project Phase 2 Job No. 22419
Subject: Bolt Analysis - Connections Design Rev No. 1
From the figure, the m ost stressed bolt has a tension load of 6.34 kN and shear load of
1.16 kN.
V := 1.16⋅ kN T := 6.34⋅ kN
From AISC
2
dbolt := 19⋅ mm n := 10 no of threads per inch Ab := 285⋅ mm
Tb := 141⋅ kN
Calculate the effective net area at approximately the root of the threads of threaded tension
m embers using AISC Specification.
2
Tensile stress area,
Ae := 0.7854⋅ dbolt −
0.9743 ⋅ ( mm)
n
25.4
2
Ae = 214.481 mm
T N
ft := ft = 29.56
Ae 2
mm
V N
fv := fv = 4.07 ( shear force too sm all to consider )
Ab 2
mm
Ft := 380⋅ mPa − 1.4 ⋅ (fv)
N
Ft = 374.302 > 303 m Pa , tension is too sm all to consider
2
mm
ft⋅ Ab N
Fv := 121⋅ 1 − ⋅ 2
Tb
mm
N
Fv = 113.77 > fv , therefore. o.k. ( shear force is too sm all to consider )
2
mm
_______________________________________________________________________________________________________