Professional Documents
Culture Documents
Crosby MC 0330 Us
Crosby MC 0330 Us
Crosby is either a trademark or registered trademark of Tyco International Services AG or its affiliates in
Flow Control the United States and/or other countries. All other brand names, product names, or trademarks belong
to their respective holders.
Specifications
Materials of Contruction
Part Name Material
Lug Union Nut Cast Bronze
Nozzle Stainless Steel
Nozzle O-ring Viton®
Pressure Relief disc Cast Bronze
Vacuum Disc Stainless Steel
Vacuum Disc O-ring Viton®
Vacuum Spring Washer Stainless Steel
Vacuum Spring Stainless Steel
Relief Spring Washer Brass
Relief Spring Stainless Steel
Adjusting Bolt Stainless Steel
Jam Nut Stainless Steel
Socket Head Cap Screw Stainless Steel/Nylok
Cylinder Cast Bronze
Cap Brass
Nameplate Stainless Steel
Nameplate Adhesive Mod. Methacrylate
Seal/Wire Lead/Stainless Steel
Gasket White Nitrile 4660
Temperature Range • Tri-clamp inlet sanitary connector Set – pressure relief 25 psig
(Ladish) vacuum relief 2" W.C.
-15°F to 400°F
• Proximity switch Capacity:
Standard Connections Liquid – 400 gpm at 25 psig set
• Lug union nut inlet connection. pressure and 10% overpressure.
Other connections may be designed Standard Materials Gas – 1989 SCFM at 25 psig set
to specific customer requirements. • Bronze cylinder, stainless steel and pressure and 10% overpressure.
• The outlet must be open to the bronze trim with Viton® seats. Vacuum – 45 SCFM 2" W.C. vacuum
atmosphere to assure valve • Alternate materials may be provided to set pressure with 8" W.C. total
cleanliness and proper performance. meet special customer requirements. pressure drop.
• Connection gasket is per customer Optional Operating Characteristics
specification.
Specifications shown above are current
Crosby standards. Please contact your
local sales representative for applications
requiring special design or operating
Note
characteristics.
1. Short springs and cylinders are furnished
for set pressures to 25 psig in 3" size and
27 psig in 4" size.
Long springs and cylinders are furnished
for pressure ranges 26 to 125 psig in 3"
size and 28 to 125 psig in 4" size.
Dimensions and drawings are available.
Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services.
Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO
REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO
THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING
INCIDENTAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco
reserves the right to change product designs and specifications without notice. All registered trademarks are the property of their respective owners. Printed in the USA.
Copyright © 2009 Tyco Flow Control. All rights reserved. CROMC-0330 www.tycoflowcontrol.com
2