Professional Documents
Culture Documents
ANNEX 2014 5 Fitweld Motor Mount
ANNEX 2014 5 Fitweld Motor Mount
4.6.2014 1 (2)
Kit includes:
4x M5x20 T25 screws
1x Motor mount plate
1x Instructions
NOTICE !!!
One corner of plate is different due to
machine chassis design, see next pic-
ture.
NOTICE !!!
Plate won’t fit properly if this corner
isn’t next to wire reel hollow. You may
need also to drill screw holes bigger.
Notice
Kemppi Oy
Postiosoite PL 13, 15801 Lahti Puhelin (03) 899 11 Address PO Box 13, FIN-15801 Lahti, Finland Phone +358 3 899 11
Pankki Nordea, Lahti Faksi (03) 899 428 Bank Nordea, Lahti Finland Fax +358 3 899 428
ALV rek. FI 20518261 Sähköposti export@kemppi.com VAT number FI20518261 E-mail export@kemppi.com
Y-tunnus 2051826-1 Internet www.kemppi.com Business ID 2051826-1 Internet www.kemppi.com
W009302
4.6.2014 2 (2)
NOTICE !!!
Slide the plate accordingly to the picture. Remove gas solenoid cables and mark
motor wires before you disconnect those. Check that gas hose is not crushed by
the plate once the motor and its screws have been tightened.
Installation notice
Remarks:
As mentioned check the motor mount plate and its one different corner before sliding the plate in its place.
Check the screw holes before installing the motor and supplied screws.
Kemppi Oy
Postiosoite PL 13, 15801 Lahti Puhelin (03) 899 11 Address PO Box 13, FIN-15801 Lahti, Finland Phone +358 3 899 11
Pankki Nordea, Lahti Faksi (03) 899 428 Bank Nordea, Lahti Finland Fax +358 3 899 428
ALV rek. FI 20518261 Sähköposti export@kemppi.com VAT number FI20518261 E-mail export@kemppi.com
Y-tunnus 2051826-1 Internet www.kemppi.com Business ID 2051826-1 Internet www.kemppi.com