Professional Documents
Culture Documents
Direction: Select The Letter of The Correct Answer. Write Your Answers On A Separate Sheet of
Direction: Select The Letter of The Correct Answer. Write Your Answers On A Separate Sheet of
Direction: Select The Letter of The Correct Answer. Write Your Answers On A Separate Sheet of
1. Which tool is used for hardware to stand on to prevent static electricity from building up?
a. Anti-static mat c. Philips head screwdriver b. Hex
driver d. Wire cutter
2. Which tool is used to loosen or tighten cross-head screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
3. Which tool is sometimes called a nut driver? It is used to tighten nuts in the same way
that a screwdriver tightens screws?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
4. Which tool is used to strip and cut wires?
a. Anti-static mat c. Philips head screwdriver
b. Hex driver d. Wire cutter
5. Which tool is used to retrieve parts from location that are too small for your hand to fit?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
6. Which tool is used to clean different computer components without scratching or
leaving debris?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
7. Which tool is used to bundle cables neatly inside and outside of a computer?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
8. Which tool is used to loosen or tighten slotted screws?
a. Part Retriever c. Cable ties
b. Lint-free Cloth d. Flat head screwdriver
9. Which tool is used to loosen or tighten screws that have a star-like depression on the top, a
feature that is mainly found on laptop?
a. Anti-static mat c. Philips head screwdriver
b. Torx screwdriver d. Wire cutter
10. Which tool is used to blow away dust and debris from different computer parts
without touching the components?
a. Anti-static mat c. Compressed air
b. Hex driver d. Wire cutter
Direction: (26-35) Redraw and correct the PROCESS and SHAPES of the Flowchart
START
26
Is
Ave > 75?
27 29
28
Print “FAIL” Ave = Input a, b, c
(a+b+c)/3
30
Print “PASS”
END
________2. ________7.
________3. ________8.
________4. ________9.
________5. ________10.