Professional Documents
Culture Documents
Rig Tools
Rig Tools
Page
Cat. 2012 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Page 1
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
Page 2 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Cat. 2012
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
Cat. 2012 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Page 3
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
Replacement Parts
40-1050 9-B-18 Tong Adapter 3.0 1 A/R
40-1055 9-B-17 BJ Tong Adapter Except DB & SDD 2.0 1 A/R
40-1060 9-B-23 BJ Tong Adapter for DB & SDD 3.0 1 A/R
40-1065 9-B-29 Web Wilson Adapter Pin 1.0 1 A/R
40-1070 9-B-22 BJ Adapter Pin 1.0 1 A/R
40-1075 8522-1001 Sheave Assembly 5.0 1 A/R
40-1080 9-C-15 Housing 8.0 1 A/R
40-1085 9-B-21 Sheave Pin 1.0 1 A/R
Page 4 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Cat. 2012
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
HDP & HDPS* Wt. MDP & MDS Wt. 4KRVS* Wt. 4KRBM Wt.
Kelly Size
Part # Lbs. Part # Lbs. Part # Lbs Part # Lbs.
35-2030 35-2130
5-1/4” SQ. Rollers Complete 438 131
3665 1449
30-2040
6” SQ. Rollers Complete 374
3666
HDP & HDPS* Wt. MDP & MDS Wt. 4KRVS* Wt. 4KRBM Wt.
Kelly Size
Part # Lbs. Part # Lbs. Part # Lbs Part # Lbs.
35-2031 35-2131
5-1/4 ” SQ. Rollers Only 244 72
1334-4 1434-4
35-2041
6 ” SQ. Rollers Only 180
1335-4
* Sleeve bearings are standard, roller bearings are optional. Add R at end of part number.
Cat. 2012 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Page 5
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
HDP & HDPS* Wt. MDP & MDS Wt. 4KRVS* Wt. 4KRBM Wt.
Kelly Size
Part # Lbs. Part # Lbs. Part # Lbs Part # Lbs.
Hex Roller Assemblies Complete (Set of 4)
35-2200 35-2260 35-2290 35-2320
3” Hex Rollers Complete 612 162 236 103
3667 70474-1 1450 5210
35-2230
5” Sp. Hex Rollers Complete 486
3671
35-2240
5-1/4” Hex Rollers Complete 476
3672
35-2250
6” Hex. Rollers Complete 414
3673
HDP & HDPS* Wt. MDP & MDS Wt. 4KRVS* Wt. 4KRBM Wt.
Kelly Size
Part # Lbs. Part # Lbs. Part # Lbs Part # Lbs.
35-2231
5” Sp. Hex Rollers Only 292
1387-88
35-2241
5-1/4” Hex Rollers Only 292
1344-45
35-2251
6” Hex Rollers Only 220
1346-47
* Sleeve bearings are standard, roller bearing are optional. Add R at end of part number.
Page 6 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Cat. 2012
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
HDP & HDS Qty. MDP & MDS Qty. 4KRVS Qty. 4KRBM Qty. 4KRP/KRS Qty.
Description
Parts # Wt. Part # Wt. Part # Wt. Part # Wt. Part # Wt.
Cat. 2012 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Page 7
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
Page 8 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Cat. 2012
Oil Savers, Rope Sockets,
8-Ton Tong Block, Kelly Rollers / Parts
Cat. 2012 www.rigtool.com • sales@rigtool.com • (877) 744-8665 • fax (817) 595-1337 Page 9
Swab Equipment / Cups
Cat. 2012 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Page 1
Swab Equipment / Cups
Swab Cups
Type NUF The ‘NUF’ is a heavy duty, all rubber Type TUF The ‘TUF’ is a flexible cup using a method
cup. The ‘NUF’ combines both long life and of attaching the spring steel reinforcing wires
maximum capacity lift, even under deep to the molded-in valve ring. The ‘TUF’ is
swabbing conditions. Like the HPR, this molded from a rubber compound for lifting
cup is molded either on a steel or aluminium medium to heavy loads.
bushing
Type TA The ‘TA’ is a medium duty, all rubber, Type J The ‘J’ is a very durable heavy duty cup
variable lift cup. The ‘TA’ is made from with a long flexibly lip to provide a perfect
a softer rubber which allows for greater up stroke seal. The strong steel reinforcing
flexibility under lighter loads. This Cup wires are secured by a retaining ring which
is also available with either a steel or keeps the wires from snagging, even in the
aluminum bushing in all popular sizes. The roughest of tubing. Available in many popular
‘TA’ can be used on any Guiberson style sizes, the ‘J’ cup must be run on Guiberson
swab mandrel. standard swab mandrel.
Type MV The ‘MV’ is a light duty, all rubber cup. Type GW The ‘GW’ cup is molded from abrasion
The multiple upturned lips pass easily resistant rubber for lifting light loads. The
thru tight spots and is especially suited for ‘GW’ seals so well it has become the
fluid with a high ratio of suspended sand standard for total fluid removal. The ‘GW’ is
because the lips will invert to dump an ideal for getting the last drop out of the well
excessive load. and may be run on any Guiberson swab.
Type V The ‘V’ is a ring type, single lip, all rubber Type H The ‘H’ Oil Saver Rubber‘s specially
cup molded onto a steel bushing. This cup compounded of oil resistant rubber and is
is ideal for lifting fluids heavy with sand designed to give positive seal with long-
and or light load swabbing. The flexible 'V' wearing qualities.
quickly and automatically dumps excess
loads. The number of 'V' cups may be
varied to meet the swabbing conditions and
can be run on any Guiberson style swab.
Cat. 2012 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Page 1
Swab Equipment / Cups
* Undersize Cup - For faster fall and plastic lined or internal upset tubing.
Cat. 2012 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Page 3
Swab Equipment / Cups
75-0808 75-1108
6.40-6.50 2.441 2.371 2.360 1.350 - - - 2.490 1.344
69845 10047
8.60-8.70 2.259 2.200
- - - - - - - -
2-7/8" 8.90 ... 2.243 2.245
(2-1/2") 9.35-9.50 2.195 2.130
- - - - - - - - 1.094
9.80-10.40 2.151 2.151
75-0807 75-1107
11.54-11.65 1.995 - 1.910 1.078 - - - 2.000
68333 10716
75-1113
9.20-9.50 2.992 2.920 - - - - - - 3.020
14960
3-1/2"
12.80-13.30 2.764 - - - - - - - 1.344
(3”) 75-11131
2.770
14082
12.70-12.95 2.750 2.687 - - - - - -
14.90-15.50 2.602 - - - - - - - - -
9.50 3.548 - - - - - - - - -
4" 1.938
75-1117
10.80-11.95 3.476 3.395 - - - - - - 3.526
14036
* Undersize Cup - For faster fall and plastic lined or internal upset tubing.
Page 4 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Cat. 2012
Swab Equipment / Cups
Cat. 2012 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Page 5
Swab Equipment / Cups
75-1510 75-1810
3-1/8” 3-1/8” ID
16370 16370
75-1113 75-1713 75-1813 75-1113
9.2 - 10.2
14960 87310 16146 14960
75-1513
16146
3-1/2” Large ID Kobe
75-15131
61943
75-11131 75-17131 75-11131
12.95 - 13.3
14082 87311 14082
75-1117 75-1717 75-1117
4” 9.5-11.6 14034
14036 87312 14036
75-1521 75-1621 75-1721 75-1121
9.5 - 12.6 13486
30509 54864 87313 19841
4-1/2”
75-15211 75-16211 75-17211 75-11211
13.5 - 18.9
10430 54430 87314 19840
75-1525 75-1625 75-1725 75-1125
13.5 - 15.0 13764
25389 54865 87315 19843
5”
75-15251 75-16251 75-11251
18.0 - 21.0 13489
17831 54866 19842
13241
13.0 - 15.0 22624
93989 75-1529 75-1629 75-1729 75-1829 75-1129
22625 54753 87318 30848 13654 19846
15237
5-1/2” 15.5 - 17.0
22626
13402
75-15291 75-16291 75-17291 75-18291 75-11291
17.0 - 23.0 19710 13657
19711 54761 87316 30846 19844
57460
75-1531 75-1731 75-1131
5-3/4” 14.0 - 17.0
14714 87335 19847
75-1533 75-1733 75-1131
14.0 - 18.0 16178
14721 87336 19847
6”
75-15331 75-17331 75-1133
20.0
14714 87337 19848
Page 6 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Cat. 2012
Swab Equipment / Cups
Cat. 2012 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Page 7
Swab Equipment / Cups
Page 8 2504 Gravel Dr. • Ft. Worth, TX 76118 • Sales@rigtool.com • (877) 744-8665 • Fax (817) 595-1337 Cat. 2012