INDICATION.
REVISIONS 15-025-530W2
iar
DESCRIPTION Dare [rn
BAORRas A wim Dara? Baw Tee, =
|L REMOVE FRONT WINDOW: Remove 4 front screws and remove window.
Removal can be safely done with power on and Unit mounted in the pan.
‘2.DECIMAL.POINT: Apply power as specified to terminals 11 & 12, Select
‘esired decimal point (or none) 1, 2, oF 3 to cortaspond tothe display.
Ups on. Only one should bein the up position (or none).
LDUMMY ZERO: Switch postion 4 in the up position. Light the Fight
hand dummy zero.
A.INDICATION ZERO: With no input signals, adjust the indication to 2070
{ting the *C Zero" with a small screw diver
LINDICATION CALIBRATION: Connect as shown. Apply 120V & 4.167A at phase
‘angle zero (G00Wielement). Turn “C Cal” (Course) & than “F Cal to produce
an indication of: 1.0KW x CTR x PTR
Use decimal point & dummy zoro a8 requied.
Example: 1.0 » 1200 x 100Q.~ 240MW
5 CTRN PIR
.QUTPUT CAL: When output is provided, it usualy doesnt requ
However ican be done using @ DMM across a plug into J. Jumper
‘410 8 uniess circuit is completed by output loads. Zero output by removing input
Signal voltage & current. Turn “D Zero” to get exactly zero output. Or 4,00 oF
112.00mA for "420mA units. Now apply 500 Watts ae in Par. 8. Turn "B Zero" to
‘obtain output of 1,000mADC (or 20,00mADC for 1420" units
CALIBRATION PROCEDURE:
“APPLICATION
FOR DIGITAL WATTMETER
‘25-530W2 SERIES
TeFECODETDERT RO
50290 | 15-025-530w2
Sea sweet 7 OFF