Professional Documents
Culture Documents
Communications Ii (Laboratory) : Schedule: WEDNESDAY, 10:30 AM - 12:00 NN
Communications Ii (Laboratory) : Schedule: WEDNESDAY, 10:30 AM - 12:00 NN
(LABORATORY)
SCHEDULE:
WEDNESDAY, 10:30 AM -12:00 NN
GROUP # 9
GLIMADA, SHEENA M.
HICBAN, KATHLENE JOY S.
LOPEZ, WILBERT P.
MEDINA, JOMER M.
TUMANAO, MICAH MEL L.
DESCRIPTION OF THE PROJECT:
This project is designed in such a way that the android application from the user's
mobile phone will be used to set the parameters, such as the time and food level, needed to
operate the device. Once these parameters have been set, the android will send the data to the
arduino through the use of bluetooth module. The microprocessor will program the bluetooth
module to receive these parameters and send it to the Rx pin of the Microprocessor(Arduino).
Once received, read and processed, the device will send signals to the servo motors and
solenoid valve and these would act as the switching signals necessary to open the feeder at a
certain time, and close it once it reached the desired output level.
http://www.radio-electronics.com/info/wireless/bluetooth/radio-interface-modulation.php
https://learn.sparkfun.com/tutorials/bluetooth-basics/bluetooth-profiles
https://www.itead.cc/wiki/Serial_Port_Bluetooth_Module_(Master/Slave)_:_HC-05