Professional Documents
Culture Documents
TEC Tofana JKT M 170410 Fs-Clotex
TEC Tofana JKT M 170410 Fs-Clotex
INSTRUCTIONS
CATEGORY LIGHT SKIN
STYLE JACKET MAN
STYLE NAME LIGHT SKIN TOFANA JKT M
ARTICLE NUMBER 60370
SEASON W18-19
AVAILABLE SIZES S - XXL
SUPPLIER
DATE 4/10/2017
CONTACT Franzi
N° Fabrics Specification Supplier Art. N. Quantity NIGHT BLUE BLUE SEA MATCHA GREEN Up-date COM
N° Labels Specification Supplier Art. N. Quantity
left back side seam inside, 10cm above hem
Woven care label 75mm - TBD Clotex TBD 1 pcs Black/ White Black/ White Black/ White only for BULK
edge - for BULK
N° Measurements Photo
pls make a new pattern based on the given measurements, with raglan sleeve
body without additional seam at side position! sideseam has been twisted frontwards
preshaped / articulated sleeve, without additional sleeve inseam, only panelseams at front and back
for cuffs pls follow given measurements; cuffs should be bias cut
pls follow style sketch for proportion & shape of panelseams and pocket positions, as it is different to the women's style:
pocket position is higher, pockets are larger, yoke shape is different, raglan shapes are different;
Workmanship
inner collar is in mainfabric (F.1), but reversed, so the brushed woolly side is visible on the inside;
inner lower collar edge should be fold in and attached to the outside with a shadow seam (stitched directly in the shadow of the neckline seam);
top collar edge with 0,5cm single stitching outside;
lasercut and bonded pocket on left sleeve in F.5 = lycra, same shape, size and workmanship as usually made on men's fleece styles
front pockets in F.4 = Powermesh outside on front part, fixed within the surrounding panelseams; pocket opening finished with elastic binding;
should be 1cm shorter compared to pocket opening, see MSM
double layer cuffs in mainfabric (F.3) with fold edge, bias cut; pls follow pattern for correct shape
hem edge finished with elastic binding, see MSM for stretched and relaxed measurement;
visible inserted zipper at CF, with zip flap inside in mainfabric, bonded and with fold edge at front + garage on top; see detail sketch for correct s
CF zipper clean finished inside with 10mm webbing, same as Fleece styles; see also INSTR
Trims
pls follow INSTR sheet for correct trims, logos and materials
Design
pls follow sketch and INSTR for correct design and colourways
General
please send the proto in size M with correct materials and trims in available colours asap
N° Measurements Photo
1
2
3
Workmanship
Finishing
Trims
Design
General
N° Measurements Photo
1
2
3
Workmanship
Finishing
Trims
Design
General
N° Measurements Photo
1
2
3
Workmanship
Finishing
Trims
Design
General
N° Measurements Photo
1
2
3
Workmanship
Finishing
Trims
Design
General