Professional Documents
Culture Documents
1 4981562
1 4981562
SVPWM
Haibo Wu
Core losses of an inverter-fed permanent magnet synchronous motor with an amorphous stator core under no-
load
AIP Advances 6, 055916 (2016); 10.1063/1.4943361
What influences personal purchases of new energy vehicles in China? An empirical study based on a survey of
Chinese citizens
Journal of Renewable and Sustainable Energy 8, 065904 (2016); 10.1063/1.4966908
Abstract. The control system is designed to realize TMS320F28335 based on the permanent magnet synchronous motor
speed control system, and put it to quoting all electric of injection molding machine. The system of the control method
used SVPWM, through the sampling motor current and rotating transformer position information, realize speed, current
double closed loop control. Through the TMS320F28335 hardware floating-point processing core, realize the application
for permanent magnet synchronous motor in the floating point arithmetic, to replace the past fixed-point algorithm, and
improve the efficiency of the code.
Key words: Permanent magnet synchronous motor; speed control system; all electric injection molding machine; floating
point arithmetic.
INTRODUCTION
All electric injection molding machine has many advantages, is the main development direction of the current
high-end injection molding machine, all its movement mechanism all adopt AC servo motor drive, so the performance
of all electric injection molding machine with permanent magnet synchronous motor drives are closely linked, the
permanent magnet synchronous motor is stable and reliable driving has become an important part of all electric
injection molding machine. This paper uses TMS320F28335 Company’s TI as the control core. With the high-speed
calculation capability of TMS320F28335, suitable for all kinds of motor control peripherals, its unique hardware
floating-point arithmetic ability, the design speed of permanent magnet synchronous motor control system can replace
the original fixed-point algorithm to improve the efficiency of the code.
SYSTEM SOLUTIONS
2017 5th International Conference on Computer-Aided Design, Manufacturing, Modeling and Simulation (CDMMS 2017)
AIP Conf. Proc. 1834, 020023-1–020023-5; doi: 10.1063/1.4981562
Published by AIP Publishing. 978-0-7354-1504-1/$30.00
020023-1
and the position in the digital quantity through SPI transmitted to DSP. DSP can calculate the current speed of the
motor, feedback to the speed loop, and the value of the electric angle to the PARK transform and PARK transform.
FIGURE.1 Magnetic field oriented control principle of permanent magnet synchronous motor
Decoupling and feedback of the relationship between three-phase current and rotor position are sampling and
feedback of current in the control of permanent magnet synchronous motor. CLARKE transform and PARK transform
to the acquisition of the A phase, B phase current, into the rotor position independent of the D-Q axis current, and
then the current loop control.
CLARKE transform and PARK transform is the transformation formula of mathematical model of three-phase AC
motor based on the CLARKE transform is a a-b-c three-phase stator current instantaneous static coordinate space into
stationary coordinate d-q, as shown in Fig.2.
FIGURE.2 Stator static a-b-c coordinate system and static d-q coordinate system
020023-2
Id Ia (1)
®
¯ Iq (2 Ib Ia ) / 3
And the PARK transform is to change the static d-q coordinate system into the dynamic coordinate system D-Q
coordinate with the rotor rotation, in order to complete the current and the rotor position decoupling. The concrete
principle is shown in Fig.3
FIGURE.3 Relationship between the stationary d-q coordinate system and the rotating D-Q coordinate system
The D axis is the direction of the rotor magnetic field. The value of IQ and ID is related to the angle between the
D axis and the d axis and Id, Iq, and the specific formula is as follows:
Generation of SVPWM
The generation of SVPWM is the key to control the three-phase AC motor. In order to get the SVPWM wave, the
control unit must generate the control signal to control the switch of the inverter to realize the output of the waveform.
SVPWM in the AC motor at a predetermined voltage phase work, SVPWM generates a pulse signal, and can reduce
the resonance. In the aspect of signal conversion, high speed photoelectric coupling device is used, the 8 signals are
connected to drive power module to generate 8 different phase voltage V0~V7. As shown in Fig. 4.
020023-3
The vector axis is divided into six parts in figure 4. A two-dimensional representation of adjacent vector method
is only a little different, changes in the sequence, the conclusion is that only one transistor conduction mode change.
However, when a vector is converted to a vector of another adjacent vector mode, the vector and the vector of the two
phases are generated during the sampling period of the predetermined output voltage T.
The current loop is the inner loop of the speed control system of permanent magnet synchronous motor, and it is
the most important part of the whole system. The dynamic response characteristic of the current loop determines the
whole system. It is necessary to ensure the response speed and control precision of the current loop, and the vector
control strategy is possible.
The carrier frequency of the system is 15 kHz, that is, the control period of the current loop is 15 kHz/s. In order
to control the current of the D and Q axes simultaneously, the current control needs two current rings to coordinate
the work at the same time to achieve the Q axis current and the speed loop is equal to the current, the current of the D
axis is equal to zero. Q axis current regulation and D axis current regulation are using the anti-saturation integral PI
regulator.
Method of operating parameters of the current regulator setting: 1 the motor rotor is fixed, the purpose is to
eliminate the interference of motor rotation EMF; 2 for a given frequency and 1kHz current signal, corresponding to
the speed loop to rate the current signal; 3 were collected and compared with the given current signal feedback the
current signal, repeated attempts to adjust the parameters of PI, so far the best until the effect, thus setting PI parameters.
Speed control is also a very important part of AC servo control system, and its control performance is an important
part of the overall performance of servo system. In a broad sense, the speed loop should also have the characteristics
of fast response and little overshoot. Specifically, it is reflected in the performance index of small speed fluctuation
rate, fast frequency response, wide speed regulation range and so on. Good choice of three-phase AC permanent
magnet synchronous servo motor, high resolution photoelectric encoder, zero drift error small current detecting
element and high switching frequency high power switching element, can reduce the speed non-uniformity, achieve
high performance speed control. But in the actual system, these conditions are limited, which requires the use of a
suitable speed regulator to compensate.
Speed loop does not need too high sampling frequency, high sampling frequency is easy to cause the instability of
the system. In the program, set the PWM cycle every 20 times for a speed sampling, that is, the speed loop control
cycle is 0.75 kHz/s.
TEST
020023-4
TABLE. 1 Parameters of permanent magnet synchronous servo motor
Rated power 2.2 KW No-load current 1.1 A
Rated speed 3000 rpm No-load input power 383 W
Rated current 7.014 A U phase resistance 1.31ȍ
Rated torque 7.52 N.m V phase resistance 1.31ȍ
Driver input voltage 3 phase 380V W phase resistance 1.31ȍ
CONCLUSION
The system design uses TMS320F28335 as the main control chip, the application of the 2.2KW permanent magnet
synchronous motor speed control. The digital signal processor for permanent magnet synchronous motor using the
floating-point function, from the point of view of the experimental results, the parameters of PID sectional design
largely meets the requirements, the system implementation course, single phase current waveform can be more stable,
D, Q axis current has some concussion, follow-up study to further improve the stability of PI regulation.
REFERENCES
1. Li Hongli. Li Zhe. Xiangxuan. et al. Design of permanent magnet synchronous motor speed control system
based on TMS320F28335 [J]. Journal of micro motors. 2014, 47(6): 65-68.
2. Gu Shanmao, He Fengyou, Tan Guojun, et al. Status and development of sensor less control technology of
permanent magnet synchronous motor [J]. Transactions of China Electro technical Society, 2009, 24(11): 14 -
20.
3. Fakham, H, M Djemai, K Busawon, Design and Practical Imple-mentation of a Back-emf Sliding-mode Observer
for a Brushless DC Motor [J]. Electric Power Applications, 2008, 2(6): 353-361.
4. Hongryel Kim, Jubum Son, Jangmyung Lee. A High-speed Sliding-Mode Observer for the Sensor less Speed
Control of a PMSM [J]. IEEE Transactions on Industrial Electronics, 2011, 58 (9): 4069-4077.
5. Lu Wenqi, Hu Yuwen, Du Xuyang, et al. Sensor less vector control speed control system of permanent magnet
synchronous motor [J]. Chinese Journal of Electrical Engineering, 2010, (33): 78-83
6. Guo Dong Duan Lihua. Design of high performance permanent magnet synchronous motor speed control system
based on TMS320C28346 [J] Journal of Aviation Weapon, 2012, (5): 20-24.
7. Liliangyi. Design of permanent magnet synchronous motor speed control system based on DSPF2812 [J] Journal
of Yangtze University, 2011, 8(6): 106-109.
020023-5