Professional Documents
Culture Documents
Proposal To Carry Out The Repair Work On Grid Line 2 Beam
Proposal To Carry Out The Repair Work On Grid Line 2 Beam
Proposal To Carry Out The Repair Work On Grid Line 2 Beam
Prepared substrate would be chipped and shall be cleaned with compressed air and soaked with water.
Design criteria, limits for single application shall be followed as recommended by the manufacturer
instructions with company approved material.
Bonding agent would be applied prior the repairing work for better bonding
The plastering of the beam would be done in 3 layers (2 layers of 15~ 20mm rush coat with mesh and
a finishing coat with approved material)
The Company approved mixed material shall be applied over the prepared substrate.
Knife or trowel to the required level using the minimum of solvent on the trowel to aid workability.
The surface may be finished smooth by use of a paint brush dipped in cleaning solvent where a very
deep recess is to be filled, it may be necessary to build up in layers.