Studio Systems Division
AUTOMATED PROCESSES, INC.
{S CENTRALDRVE FARMINGDALE. NEW YORK Tbe iecevezt2
MODEL 550 EQUALIZER
Features:
+ Three range - eleven frequenc:
boost or attenuation in steps to 12dB
+ Shelving or peaking curves independently
Selectable for upper and Lower ranges.
+ Switchable audio band-pass filter
+ Transformer coupled output to +28dBn
+ Low noise and distortion
+ Panel mounting 14" x 5k"
+ Utilizes Automated Processes’ 2520 Op Amps.
The Autémated Processes Model 550 Equalizer is designed as a highly versatile channel nodule
Glen ‘vectprocel equalisation et eleven frequency points in five'stepe of boost or attenuation
Cova naximan of ids at each points
‘The eleven frequency points are divided into three ranges with the upper and lover ranges
Individual ly selectable as either peaking or shelving. This combination of possibilities makes
the 350 ideally sulted for all types of music or voice enhancement and effects equalization,
A'band-pass filter (S0He to 15kHz) may be inserted independent of all other selected equalization
settings.
Ten controls are provided to accomplish the various functions, Three dual concentric rotary
switches perform Frequency selection and degree of equalization for the three ranges; the Taner
knob selects the desired frequency while the outer kod sets the degree of boost cr cur from
fa'nid position (reciprocal equalization) in steps of 2, 4, 6, 9 and 12d,
Two push buttons select either the bell-shaped peaking curves or shelving curves for the upper
and Youer: frequency ranges. The five center” frequencies in the mid-range are reciprocal belle
shaped peaking fanilies-
A small toggle switch is used to insert the band-pass filter into the equalizer.
A pushrbutton throws the equalizer networks {n or out of the circuit while Lighting @ soall
tally light showing when equalization is "In", The switching ls silent permitting use of this
function during program.
in onder so optimise signal to noise ratio over the widest possible range of operating conditions,
wo input/output connections are provided. The "High Level” connection is recommended for input
Levels between OdBm and +12d8m and provides output capability to +28dBn. The "Low Level"
connection permits operation at levels between “15din and Odim without encountering the usual.
increase in relative noise level. The maximin output capability in this connection is equivalently
reduced to +20din.
‘The Model 550 Equalizer makes use of Automated Processes 2520 operational amplifiers and therefore
exhibits the reliability, long life and uniformity which are characteristic of this device.
The Model 550 operates from a bipolar power supply of fron #15 to 118 volts permitting
Lattitude in system design and assurance of, stability under” normal operating conditions.
It ts reverse polarity protected and will withstand 1507 transients reducing the
Liitheod of dinage #08 power Ine surges and power supply nalsunctions. Power
Gecoupling ts also provided to minimize signal coupling in the power supply lines.‘SHELVING FAMILY
Output Impedance:
Nominal operating
Progran Level?
Insertion Lo
Ly Response,
Unequal bed,
Maximum Output Level:
Noise:
15ka nigh Level,
Gkrtow fever
Less chan 850
-15dBa to +1248
None (bridging)
20.548 30H to 202
428da, transformer tsolated
ised, agugnae, co
eeeterae
Seed Nore.
ames Hd ett
Less than 0.35% T.H.D, 30K8
0 2okdis at +28dBa output
@ 70mA, (12 volt, 30m
2 may
Controls:
‘Dual Concentric Rotary:
Dual Concentric Rotary?
Dual Concentric Rotary:
Toggle Switch:
Bush Button:
Push Button:
Push Buetont
Dimensions:
Connector:
LE selects 30 100, 200 te
OF equalization -T2a8 to s12as
ALL equalization te in steps
Of 25.4, 6 9 and 12 dB either
plus’ or'mizus
30h tp shtie bend-pase ftleer
ry or Out
LE ange Peak or Shelf
HP range Peak or Shelf
Equalization In or Out.
Tally Light when in
Escutcheon 1h x Sk; case 53/4
Dehind panel
30 pin FC comector supplied.AUTOMATED PROCESSES, INC.
‘90 MARCUS DRIVE, MELVALE, NEW YORK T1746 516-694-9212
MODEL SOA EQUALIZER INSTALLATION
In order to optinize signal to noise ratio over the widest possible range of operating conditions,
two input/output connections are provided. The "High Level” connection 1s recommended for input
Levels between Odi and. ‘12d3n and provides output capability to =28dia, The "Low Level”
connection permits operation at levels between “15dBm and Odiim without encountering the usual
Gncrease in relative noise Level. The maximum output capability in this connection is equivalently
reduced to +20dbn.
‘The Model 550A may be mounted in a suitably machined panel. A cutout of 4 11/16" by 1 15/32",
and two 44-40 tapped holes will be required (see dimensional drawing). The panel of the
Model "350A will overlap the panel cutout and holes
Connections are made to the 80 contact female connector supplied and are shown below.
Function
L Chassis Ground
2 Output High (High Level Stgnal)
3 Output High (Low Level Signal)
4 Output Low
5 Shield Ground (Power Common)*
6 Spare
7 pare
8 Input Low (Power Common)*
9 Input High (low Level, Signal)
10 Input High (igh Level Signal)
aL Gain Trim (See Note 2)
12 ESV Power Supply Input 600A max.
13 +Power Supply. Common’
1h =15V Power Supply Input 60mA max.
15 Spare
* These terminals are internally connected.
Tah
FE YrgAPPomiceing Diode (LED) tally Lamp dravs 4 millianps from the -15V supply.
Interchangegbtlity with Model_550
FESSRTEMDE TP STEIG Eee angeable with the earlier Model 550 on a pin for pin baste
with the exception that ping 6 and 7. (Model 550 Tally Lamp Supply) need not be connected in
Order to operate the Model 550A LED Tally Lamp.
Gain Adjustment
‘The Model 550A is factory adjusted to provide unity voltage gain in both High Level and Low Level
configurations. However, gain may be increased by the use of a gain trim resistor between
terminals 8 and 11; The value of this resistor for various gain settings is given in the table
below. An additional gain increase or reduction of approximately B48 may be obtained by means of
the input and output terminals provided. Connecting to High Level In and Low Level Out reduces
gain, while Low Level In and High Level Out increases gain.
NO. 4-40 NC
(ZREQD)
[fain in ae | Restator a
a open
2 510
6
4 180 1
= RECOMMENDED
S PANEL CUTOUT
é 2
10 10
rm Shore
is LL
7