ASAHI Current Transformer
Introduction
Manufactured in Malaysia, ASAHI
toroidal current transformer for
measurement and protection
application in tandard range or custom
mace
‘current transformer transform a value
Of primary current to a standardizing
sina value of secondary current easy 0
handle for measurement instruments or
protective relay. The standard
Secondary value are 5 Amp, 2 Amp and
Amp, the prefered value is 5 Amp,
“The toroidal core are using high grade
cold roll grain oriented silicon steel
strip, covered with layers of ‘high
insulation grade material, providing the
core totally insulated from the
ry winding. The enamelled
copper wie then wound on the core
by high precision automatic toroidal
‘nding machine, the secondary
winding protected by anether layer of
prespahn insulation and finally covered
by lapped of PVC tape. Suitably plated
terminal tag, M6 screws and nuts are
+ PVC taped ring CT
The black PVC tape are applied on
the enamelled copper wire winding
‘on the toroidal core, these are
suitable for indoor use, commonly
Used in LT. Switchboard and starter
panel. A metal mounting bracket can
be added on CT for starter panel
* Epoxy encapsulated CT
The toroidal core and enamelled
copper wire winding are placed into
a suitable size of plastic moulded
shell, epoxy resin then completely
cover the wansformer and cured to
the solid state, These CT are higher in
cost but are robust and the winding
ate totally covered by epoxy resin
protection,
+ Moulded Case CT
The toroidal core and the enamelled
copper wire winding are moulded in
between 2 plastic moulded shell, thus
providing a tough and robust
finished.
Products range : 85 7626/1993, IEC 441/96
OO°