3 When reaching the primed position the brake ready microswitch contact will open. Simultaneously the pump turns off. At this point the trigger (C) should be engaged. 4 Adjust nuts (F) so that there is 0.7 mm clearance between the trigger (C) and latch (D), when the microswitch contact opens. 5 With solenoid (E) energized and the trigger (C) resting on the latch (D), the solenoid plunger should slightly touch the trigger. 6 Lift the trigger (C) to check for free play. If there is free play, loosen the lock nuts (F). Turn the allen head screw (G) until the free play is just removed. 7 Remove the security set screws.