Professional Documents
Culture Documents
Errors Running Advanced Management Module (AMM) Code 50c and 50g - IBM BladeCenter S (Type 8886) - IBM Support
Errors Running Advanced Management Module (AMM) Code 50c and 50g - IBM BladeCenter S (Type 8886) - IBM Support
IBM Support
What's new?
IBM Support My support Downloads Documents Tickets Communities Training Other
Source
Symptom
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-5084063 1/4
2/20/2018 Errors running Advanced Management Module (AMM) code 50c and 50g - IBM BladeCenter S (Type 8886) - IBM Support
The following two (2) issues may occur on BladeCenter S, Type 8886, with two (2) IBM BladeCenter S SAS RAID Controller
Modules, option 43W3584 (Field Replaceable Unit 43W3630), running Advanced Management Module code 50c or 50g:
1. In Storage Configuration Manager (SCM), the zone configuration will constantly display the following message:
2. Under the I/O Module Configuration page, the Serial Attached SCSI (SAS) switch will only show half of the RSSM configuration.
Affected configurations
The system is configured with one or more of the following IBM options:
• BladeCenter Advanced Management Module, option 25R5778, replacement part number 25R5777
• IBM BladeCenter S SAS RAID Controller Module, option 43W3584, replacement part number 43W3630
Solution
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-5084063 2/4
2/20/2018 Errors running Advanced Management Module (AMM) code 50c and 50g - IBM BladeCenter S (Type 8886) - IBM Support
The referenced file will be available from the "Advanced Management Module (AMM) firmware release matrix - IBM BladeCenter"
at the following URL:
https://www.ibm.com/support/home/docdisplay?lndocid=MIGR-5084063 3/4
2/20/2018 Errors running Advanced Management Module (AMM) code 50c and 50g - IBM BladeCenter S (Type 8886) - IBM Support
Site availability
Site assistance