This document summarizes the bolt design between an angle and C-channel. It states there are 3 bolts per vertical row. Using data from a manual table, it calculates the nominal strength of a single 5/8-inch bolt in single shear as 11.052 kips. It then calculates the nominal strength of the connection as 21.993 kips and the available strength under LRFD as 16.49 kips, which exceeds the required 18.407 kN. It concludes the bolts are safe.
This document summarizes the bolt design between an angle and C-channel. It states there are 3 bolts per vertical row. Using data from a manual table, it calculates the nominal strength of a single 5/8-inch bolt in single shear as 11.052 kips. It then calculates the nominal strength of the connection as 21.993 kips and the available strength under LRFD as 16.49 kips, which exceeds the required 18.407 kN. It concludes the bolts are safe.
This document summarizes the bolt design between an angle and C-channel. It states there are 3 bolts per vertical row. Using data from a manual table, it calculates the nominal strength of a single 5/8-inch bolt in single shear as 11.052 kips. It then calculates the nominal strength of the connection as 21.993 kips and the available strength under LRFD as 16.49 kips, which exceeds the required 18.407 kN. It concludes the bolts are safe.
This document summarizes the bolt design between an angle and C-channel. It states there are 3 bolts per vertical row. Using data from a manual table, it calculates the nominal strength of a single 5/8-inch bolt in single shear as 11.052 kips. It then calculates the nominal strength of the connection as 21.993 kips and the available strength under LRFD as 16.49 kips, which exceeds the required 18.407 kN. It concludes the bolts are safe.