Professional Documents
Culture Documents
Interoperability Between UMTS and LTE (RAN17.1 08)
Interoperability Between UMTS and LTE (RAN17.1 08)
Interoperability Between UMTS and LTE (RAN17.1 08)
Issue 08
Date 2016-09-30
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and the
customer. All or part of the products, services and features described in this document may not be within the
purchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,
and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: http://www.huawei.com
Email: support@huawei.com
Contents
2 Overview....................................................................................................................................... 17
2.1 Background...................................................................................................................................................................17
2.2 Function Classification................................................................................................................................................. 17
2.3 Application Scenarios...................................................................................................................................................20
5 CSFB............................................................................................................................................... 85
5.1 Overview...................................................................................................................................................................... 85
5.2 UMTS-to-LTE Fast Return...........................................................................................................................................86
5.2.1 Overview................................................................................................................................................................... 86
5.2.2 UMTS-to-LTE Fast Return........................................................................................................................................89
5.2.3 Enhanced UMTS-to-LTE Fast Return....................................................................................................................... 90
5.2.4 LTE Measurement-Based Fast Return.......................................................................................................................91
5.2.4.1 Overview................................................................................................................................................................ 91
5.2.4.2 Triggering............................................................................................................................................................... 92
5.2.4.3 Measurement.......................................................................................................................................................... 92
5.2.4.4 Execution................................................................................................................................................................ 92
5.2.5 RSCP Measurement-Based Fast Return.................................................................................................................... 92
5.2.6 Selecting Frequencies to Be Carried in the RRC CONNECTION RELEASE Message.......................................... 93
5.2.7 Fast Return for Supplementary CSFB Services........................................................................................................ 98
5.3 CS Fallback Guarantee for LTE Emergency Calls....................................................................................................... 99
5.3.1 Overview................................................................................................................................................................... 99
5.3.2 Policy....................................................................................................................................................................... 100
5.4 CS Fallback Guarantee for LTE Common Calls........................................................................................................ 100
6 SRVCC......................................................................................................................................... 108
6.1 Overview.................................................................................................................................................................... 108
6.2 SRVCC from LTE to UMTS with PS Handover........................................................................................................ 109
6.3 Fast Return to LTE for SRVCC User..........................................................................................................................113
6.3.1 Overview..................................................................................................................................................................113
6.3.2 Triggering Conditions..............................................................................................................................................114
6.3.3 Measurement............................................................................................................................................................115
6.3.4 Execution................................................................................................................................................................. 119
8 Related Features.........................................................................................................................126
8.1 WRFD-020126 Mobility Between UMTS and LTE Phase 1..................................................................................... 126
8.2 WRFD-140226 Fast Return from UMTS to LTE.......................................................................................................126
8.3 WRFD-150219 Coverage Based PS Redirection from UMTS to LTE...................................................................... 127
8.4 WRFD-150220 Coverage Based PS Handover from UMTS to LTE......................................................................... 127
8.5 WRFD-020129 Service-Based PS Service Redirection from UMTS to LTE............................................................ 128
8.6 WRFD-140218 Service-Based PS Handover from UMTS to LTE............................................................................ 129
8.7 WRFD-150216 Load Based PS Redirection from UMTS to LTE............................................................................. 130
8.8 WRFD-150217 Load Based PS Handover from UMTS to LTE................................................................................ 130
8.9 WRFD-150215 SRVCC from LTE to UMTS with PS Handover.............................................................................. 131
8.10 WRFD-150231 RIM Based UMTS Target Cell Selection for LTE..........................................................................132
8.11 WRFD-160271 Ultra-Flash CSFB............................................................................................................................132
8.12 WRFD-171223 Fast Return to LTE for SRVCC User..............................................................................................132
11 Parameters................................................................................................................................. 350
12 Counters.................................................................................................................................. 1226
13 Glossary................................................................................................................................... 1280
14 Reference Documents........................................................................................................... 1281
1.1 Scope
This document describes Interoperability Between UMTS and LTE, including its technical
principles, related features, network impact, and engineering guidelines.
NE Type NE Model
Micro BTS3902E
NE Type NE Model
RAN17.1 08 (2016-09-30)
This issue includes the following changes.
RAN17.1 07 (2016-05-30)
This issue includes the following changes.
RAN17.1 06 (2016-03-30)
This issue includes the following changes.
RAN17.1 05 (2015-12-30)
This issue includes the following changes.
RAN17.1 04 (2015-09-10)
This issue includes the following changes.
RAN17.1 03 (2015-06-27)
This issue includes the following changes.
RAN17.1 02 (2015-05-20)
This issue includes the following changes.
RAN17.1 01 (2015-03-25)
This issue includes the following changes.
Feature Added descriptions about the RNC's new function of filtering Added
change frequencies according to the inter-PLMN handover frequency parameters
list of the UE. For details, see the following sections: to the RNC
4.3.2.4 Measurements MML
command
4.3.3.4 Measurements on LTE Signal Quality ADD
6.3.3 Measurement UINTERP
LMNHOLI
ST.
Feature Added the function of UMTS-to-LTE cell reselection of UEs Added the
change in the CELL_FACH state. For details, see 3 Cell Reselection following
Between UMTS and LTE. parameters:
l CellFac
hPrioRe
selSwitc
h(BSC6
900,BSC
6910)
l CellFac
hMeasL
ayer(BS
C6900,B
SC6910)
Added the principle, related features, network impact, and Added the
engineering guidelines of the Fast Return to LTE for SRVCC following
User feature. For details, see the following sections: parameters
6.3 Fast Return to LTE for SRVCC User and
switches:
8.12 WRFD-171223 Fast Return to LTE for SRVCC User
l U2LTES
9.13 WRFD-171223 Fast Return to LTE for SRVCC User igMeasT
10.13 WRFD-171223 Fast Return to LTE for SRVCC User ime(BSC
6900,BS
C6910)
l SigTarge
tRatThd
RSRP(B
SC6900,
BSC691
0)
l SigTarge
tRatThd
RSRQ(B
SC6900,
BSC691
0)
l HO_SR
VCC_F
AST_R
ETURN
_TO_LT
E_SWI
TCH
under
the
FastRet
urnToLT
ESwitc
h(BSC6
900,BSC
6910)
paramete
r
l HO_SR
VCC_F
AST_R
ETURN
_TO_LT
E_SWI
TCH
under
the
HoSwitc
h1(BSC
6900,BS
C6910)
paramete
r
l PERFE
NH_CS
_ONLY
_MEAS
_FAST_
RETUR
N_SWI
TCH
under
the
PerfEnh
anceSwit
ch7(BSC
6900,BS
C6910)
paramete
r
l HO_HA
NDOVE
R_FAST
_RETU
RN_TO
_LTE_S
WITCH
under
the
HoSwitc
h1(BSC
6900,BS
C6910)
paramete
r
RETUR
N_SWI
TCH
l FastRet
urnToLT
ESwitc
h(BSC6
900,BSC
6910):
HO_CS
FB_BAS
ED_RS
CP_FAS
T_RET
URN_S
WITCH
l HoSwitc
h1(BSC
6900,BS
C6910):
HO_CS
FB_BAS
ED_RS
CP_FAS
T_RET
URN_S
WITCH
l HoSwitc
h1(BSC
6900,BS
C6910):
HO_HA
NDOVE
R_FAST
_RETU
RN_TO
_LTE_S
WITCH
NOTE
The BTS3902E does not support the features and functions introduced or enhanced in RAN17.1. For details,
see 1.3 Change History.
2 Overview
2.1 Background
As wireless data services grow and conditions mature for LTE commercial use, telecom
operators begin to add LTE networks to existing UMTS network infrastructure. These two
types of networks are expected to coexist for a long time, so interoperability between UMTS
and LTE is important. This feature helps operators make the most of existing network
equipment, provide diversified services, and achieve smooth network evolution.
NOTE
Unless otherwise specified, the LTE system includes the LTE TDD and LTE FDD systems.
Table 2-1 UMTS and LTE interoperability functions classified by UE's mode
UE's Mode UL Interoperability Function Reference Document
3.1 Overview
Cell reselections between UMTS and LTE include LTE-to-UMTS cell reselections, UMTS-to-
LTE cell reselections, and UMTS-to-LTE quick cell reselections.
When the LTE network is initially deployed, LTE coverage is weak or unavailable in some
spots, but UMTS coverage is already complete. The LTE network needs to support LTE-to-
UMTS cell reselection so that UEs can reselect UMTS cells after finishing services on the
LTE network. LTE-to-UMTS cell reselection enables UEs to make full use of the existing
UMTS network and reduce load on the LTE network.
After finishing services on the UMTS network, UEs are transitioned to the CELL_PCH/
URA_PCH state or idle mode within the period specified by a timer. In this case, the UMTS-
to-LTE cell reselection function enables UEs to reselect and camp on LTE cells with better
signal quality. UMTS-to-LTE cell reselections enable UEs to better experience high-speed
services on the LTE network and reduce load on the UMTS network.
To improve user experience, the UMTS-to-LTE fast cell reselection function can be enabled
so that UEs can be quickly transitioned to the CELL_PCH/URA_PCH state or idle mode and
initiate UMTS-to-LTE cell reselections.
RAN17.1 introduced the function of UMTS-to-LTE cell reselection for UEs in the
CELL_FACH state. That is, after performing a state transition from CELL_PCH/
CELL_DCH/IDLE to CELL_FACH, a UE can perform a cell reselection to the LTE network
based on the absolute priority of frequencies.
3.3.1 Overview
When a UE finishes its services and stays in the CELL_PCH, URA_PCH state, or idle mode
on the UMTS network, it performs cell reselections to the LTE network based on information
element SIB19. Information element SIB19 carries the absolute priorities of the serving
UMTS cell and EARFCNs. After receiving SIB19, the UE will trigger measurements if
measurement triggering conditions are met. Based on the measurement results, the UE uses
reselection to camp on a suitable cell.
To use the UMTS-to-LTE cell reselection function in a cell, SIB19 must be broadcast in the
cell. To enable SIB19 broadcasting in a cell, select SIB19 under the
SibCfgBitMap(BSC6900,BSC6910) parameter in the ADD UCELLSIBSWITCH or MOD
UCELLSIBSWITCH command.
To enable absolute priority-based cell reselection to LTE for UEs in the CELL_FACH state,
which is introduced in RAN17.1, set CellFachPrioReselSwitch(BSC6900,BSC6910) to ON.
If the CN sends an Iu Release Command message containing an "Out Of Utran" IE to the
RNC after the UE in the CELL_PCH/CELL_FACH state performs UMTS-to-LTE cell
reselection, the RNC directly releases internal resources without sending a RADIO BEARER
RELEASE message or RRC CONNECTION RELEASE message to the UE. This function is
supported when OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH under
OptimizationSwitch6(BSC6900,BSC6910) is selected.
NOTE
To implement the optimized procedure of releasing a UE after an inter-RAT cell reselection, the CN
needs to support the function of carrying the "Out of Utran" IE in the Iu Release Command message.
Parameters and variable involved in the preceding measurement criteria are as follows:
l ThdPrioritySearch1(BSC6900,BSC6910)
l Qrxlevmin(BSC6900,BSC6910)
l ThdPrioritySearch2(BSC6900,BSC6910)
l Qqualmin(BSC6900,BSC6910)
l Thigher_priority_search: According to section 4.2.2 "Requirements" in 3GPP TS 25.133
(V11.5.0), the value of Thigher_priority_search (measured in seconds) equals the
number of frequencies multiplied by 60.
When absolute priority-based cell reselection to LTE is enabled for UEs in the CELL_FACH
state, which is introduced in RAN17.1, SIB19 carries the CELL_FACH state measurement
indication. The measurement indicator is specified by the
CellFachMeasLayer(BSC6900,BSC6910) parameter:
NOTE
If RSRQSwitch(BSC6900,BSC6910) is set to the same value for different LTE frequencies, you can set
NPriority(BSC6900,BSC6910) to the same value for these LTE frequencies. If
RSRQSwitch(BSC6900,BSC6910) is set to different values for different LTE frequencies,
NPriority(BSC6900,BSC6910) cannot be set to the same value for these LTE frequencies.
Criteria set l The absolute priority of an LTE frequency is higher than the absolute
1 priority of the serving UMTS cell.
l The Srxlev value of a cell served by an LTE frequency,
SrxlevnonServingCell,has remained above the threshold Threshhigh for a
period of time longer than Treselection.
Criteria set l The absolute priority of an LTE frequency is lower than the absolute
3 priority of the serving UMTS cell.
l SrxlevnonServingCell has remained above Threshlow for a period of time
longer than Treselection.
l SrxlevServingCell has remained below Threshserving,low for a period of time
longer than Treselection, or SqualServingCell has remained below or equal
to 0 for a period of time longer than Treselection.
Criteria Description
Set
Criteria set l The absolute priority of an LTE frequency is higher than the absolute
4 priority of the serving UMTS cell.
l The Squal value of the LTE frequency, SqualnonServingCell, has remained
above the threshold Threshhigh2 for a period of time longer than
Treselection.
Criteria set l The absolute priority of an LTE frequency is lower than the absolute
5 priority of the serving UMTS cell.
l SqualnonServingCell has remained above Threshlow2 for a period of time
longer than Treselection.
l SqualServingCell has remained below Threshserving,low2 for a period of time
longer than Treselection, or SqualServingCell has remained below or equal
to 0 for a period of time longer than Treselection.
The variables in the preceding criteria are described in the following table.
To summarize:
l If the criteria in criteria set 1 or 4 are met, the UE performs reselection to a cell working
at an LTE frequency with a higher absolute priority.
l If the criteria in criteria set 3 or 5 are met, the UE performs reselection to a cell working
at an LTE frequency with a lower absolute priority.
l If the criteria in neither criteria set are met, the UE remains on the UMTS network.
If multiple cells fulfill a set of criteria, the UE performs reselection to the cell with the
greatest SrxlevnonServingCell value.
UEs that are not A CELL_DCH-to- A transition from the After the UMTS-to-
enabled with CELL_PCH state CELL_DCH state to LTE quick cell
enhanced fast transition is the CELL_PCH reselection function
dormancy triggered when the state or idle mode is is enabled, the
UE has not triggered when the default length of the
transmitted or UE has not inactivity timer is
received service data transmitted or decreased and
for a period of time received service data therefore the cell
specified by for a period of time reselection process
PsInactTmrForInt( specified by is faster.
BSC6900,BSC6910) PsInactTmrForFst
(for interactive DrmDch.
services) or
PsInactTmrForBa
c(BSC6900,BSC691
0) (for background
services).
UEs that are enabled When A transition from the After the UMTS-to-
with enhanced fast RNC_EFD_D2F_S CELL_DCH state to LTE quick cell
dormancy and in the WITCH under the CELL_PCH reselection function
CELL_DCH state OptimizationSwitc state or idle mode is is enabled, the
h(BSC6900,BSC691 triggered when the default length of the
0) in the SET UE has not inactivity timer is
URRCTRLSWITC transmitted or decreased and
H command is received service data therefore the cell
selected, the UE for a period of time reselection process
transits from the specified by is faster.
CELL_DCH state to PsInactTmrForFst
the CELL_FACH DrmDch.
state when it has not
transmitted or
received service data
for a period of time
specified by
PsInactTmrForFst
DrmDch and then
transits from
CELL_FACH to
CELL_PCH when it
has not transmitted
or received service
data for a period of
time specified by
PsInactTmrForFst
DrmFach(BSC6900
,BSC6910).
UEs that are enabled State transitions State transitions After the UMTS-to-
with enhanced fast from CELL_FACH from CELL_FACH LTE quick cell
dormancy and in the to CELL_PCH are to CELL_PCH or reselection function
CELL_FACH state triggered when the idle mode are is enabled, the
UE has not triggered when the default length of the
transmitted or UE has not inactivity timer
received service data transmitted or remains the same
for a period of time received service data and therefore
specified by for a period of time UMTS-to-LTE
PsInactTmrForFst specified by quick cell
DrmFach(BSC6900 PsInactTmrForFst reselections do not
,BSC6910). DrmFach(BSC6900 provide gains for
,BSC6910). these UEs.
When the UMTS-to-LTE quick cell reselection function is enabled, whether a UE transits
from the CELL_DCH state to the CELL_PCH state or idle mode is specified by
UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH under
PROCESSSWITCH4(BSC6900,BSC6910) in the SET URRCTRLSWITCH command.
When UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH is cleared, the UE transits from
the CELL_DCH state to the CELL_PCH state when it has not transmitted or received any
service data after a period specified by PsInactTmrForFstDrmDch(BSC6900,BSC6910).
When this switch is selected, the UE transits from the CELL_DCH state to idle mode when it
has not transmitted or received any service data after a period specified by
PsInactTmrForFstDrmDch(BSC6900,BSC6910).
UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH under
PROCESSSWITCH4(BSC6900,BSC6910) is cleared by default. Select
UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH if some UEs in the network do not
support CELL_DCH-to-CELL_PCH state transitions.
Changing the value of PsInactTmrForFstDrmDch(BSC6900,BSC6910) or
PsInactTmrForFstDrmFach(BSC6900,BSC6910) affects this function and the Enhanced
Fast Dormancy feature. For details about enhanced fast dormancy, see Enhanced Fast
Dormancy Feature Parameter Description.
4.1 Overview
This chapter describes UMTS-to-LTE and LTE-to-UMTS PS redirections and handovers.
When a UE performing PS services on an LTE network moves out of an LTE coverage area or
if the LTE signal quality falls below a specific threshold, an LTE-to-UMTS PS redirection or
handover will be performed to switch the UE over to the UMTS network. The choice between
a PS redirection and a PS handover depends on the UE capabilities. This mechanism ensures
the service continuity.
Similarly, when the UE is performing PS only services in the UMTS network while in an LTE
covered area, a UMTS-to-LTE PS redirection or handover can also be performed to shift the
UE and its PS service to the LTE network to provide optimal service experience.
During redirection, an RRC connection is released in the current cell to deliver the target
frequency to the UE and the UE accesses the network again in the cell of the target frequency.
During a handover, an inter-RAT relocation is performed to shift the UE to the target cell.
During an LTE-to-UMTS handover or redirection, a part of the UE's data has been forwarded
by the CN to the eNodeB but not yet forwarded to the UE. Therefore, this part of data needs
to be forwarded to the RNC to reduce the service interruption duration of the UE during the
handover or redirection. Data forwarding in these circumstances involves two scenarios:
l The direct tunnel function is not enabled on the RNC. In this scenario, the data
forwarding path is eNodeB -> LTE SGW -> SGSN -> RNC. The routes and user plane
(UP) data channels between the RNC and SGSN usually have been configured.
Therefore, only the routes and UP data channels between the LTE SGW and SGSN need
to be configured on the CN side. The direct tunnel function is enabled on the RNC.
l The direct tunnel function is enabled. In this scenario, the data forwarding path is
eNodeB -> LTE SGW -> RNC. Therefore, on the RNC side, you only need to configure
a route from the RNC to the LTE SGW using the ADD IPRT command and a UP data
channel using the ADD IPPATH command (on the BSC6900) or ADD IPPOOL (on the
BSC6910).
If some UL multimode UEs do not support UMTS network measurements when in connected
mode, the LTE network needs to support LTE-to-UMTS blind redirections or handovers.
NOTE
Most PS services involved in LTE-to-UMTS handovers are high-speed HSPA services. Currently, during
handover preparations, if a PS service is not admitted to a UMTS cell, the PS service cannot use an R99
channel for an admission retry. When radio resources in the UMTS cell are congested, more handover
preparations may fail.
To obtain the LTE-to-UMTS handover success rate, new UMTS counters are added for
measuring LTE-to-UMTS PS handovers, as listed in the following table.
The LTE-to-UMTS handover preparation success rate and LTE-to-UMTS handover success
rate are calculated using the following formulas:
When subscribed to high data rate PS services, an LTE UE is prone to admission failures after
being handed over to a UMTS cell, especially when the handover is performed based on
coverage. In such a case, call drops increase. A mechanism is introduced to decrease the PS
service rate during inter-RAT PS handovers so that the PS handover success rate will be
increased. The implementation is as follows:
l If a BE PS service fails to be admitted with the original rate, the UE re-attempts the
admission after being switched from an HSPA channel to an R99 channel. If the UE still
fails to be admitted, the UE re-attempts the admission by decreasing its data rate to the
GBR. If the admission attempt fails, the UE continues to attempt admissions, further
decreasing its data rate until the admission succeeds. The data rate can be decreased to 0
kbit/s.
l If a streaming PS service fails to be admitted with the original rate, the UE re-attempts
the admission after being switched from an HSPA channel to an R99 channel.
If the UE still fails to be admitted, the UE re-attempts the admission with its rate
decreased to the GBR.
This function is recommended in heavily loaded cells to improve the inter-RAT incoming PS
handover success rate.
UEs performing data services on the LTE network may need to be handed over to the UMTS
network due to coverage holes or weak coverage. However, the rate of data services may be
reduced after a handover to the UMTS network. To improve user experience, RAN17.1
introduced an HSPA+ admission mechanism for inter-RAT incoming handovers. With this
mechanism, the RNC determines whether to preferentially allocate an HSPA+ bearer to a UE
that initiates an inter-RAT handover to the UMTS network based on the UE's capability as
well as related parameter settings as follows:
4.3.1 Overview
UMTS-to-LTE PS interoperation involves UMTS-to-LTE PS redirections and handovers.
When the redirection and handover functions are enabled at the same time and the UE
supports handovers, a handover takes precedence over a redirection.
Redirection
During a UMTS-to-LTE PS redirection, the RNC sends the UE an RRC CONNECTION
RELEASE message, which contains LTE frequencies.
Redirections can be classified into neighboring cell- and non-neighboring-cell-based
redirection depending on whether neighboring LTE cell configuration is required.
Redirections can also be classified as blind or measurement-based depending on whether the
UE supports measurement of LTE cell signal quality. In the following sections, LTE
measurement refers to UE measurement of the signal quality in an LTE cell.
NOTICE
The blind redirection switch can be turned on only when LTE coverage is good enough.
Otherwise, call drops may occur. To enable blind redirection, set the
U2lBlindRedirSwitch(BSC6900,BSC6910) parameter in the ADD UCELLHOCOMM or
MOD UCELLHOCOMM command to ON.
If you need to enable the non-neighboring-cell-based redirection, turn on the switch for this
function by selecting HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under
the HoSwitch1(BSC6900,BSC6910) parameter in the SET UCORRMALGOSWITCH
command. If you need to enable the neighboring cell-based redirection, turn off the preceding
switch.
The differences between neighboring cell- and non-neighboring-cell-based redirection are as
follows:
l Non-neighboring-cell-based redirection: The target redirection frequency is obtained
from frequencies as indicated by the EARFCN(BSC6900,BSC6910) parameter
configured by the ADD UCELLNFREQPRIOINFO command. When neighboring
LTE cells are configured, it is recommended that neighboring cell-based redirections be
performed.
NOTE
NOTE
Handover
During a UMTS-to-LTE PS handover, the RNC sends a handover request to the LTE network
through the core network (CN). When the LTE network finishes preparing resources, the UE
and the PS service are handed over to the LTE network.
NOTE
To allow UEs to report E-UTRA capabilities to the RNC during a UMTS-to-LTE handover,
PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH under PerfEnhanceSwitch5(BSC6900,BSC6910)
must be selected.
Table 4-1 Three operation types of UMTS-to-LTE PS redirections and handovers and the
application scenarios
Operation Application Scenario
4.3.2 Coverage-based UMTS- UMTS and LTE networks are deployed together. The
to-LTE PS Redirections and UMTS coverage is poor but the LTE coverage is good.
Handovers
4.3.4 Load-based UMTS-to- The UMTS cell is located in an area covered by both
LTE PS Redirections and UMTS and LTE networks and is in a basic congestion
Handovers state.
NOTE
If the multi-operator core network (MOCN) is enabled on the UMTS and LTE networks, operators must
use the same PLMNs in their UMTS and LTE networks.
4.3.2.1 Overview
Figure 4-1 shows the coverage-based UMTS-to-LTE (shortened to U2L) PS redirection or
handover process.
the LTE network and based on the configurations of the LTE network, such as whether
the handover or redirection switch is turned on or if neighboring cells are configured. For
details, see Handover Feature Parameter Description.
This document describes the handover or redirection to the LTE network. For details
about the decision of a coverage-based U2L PS redirection or handover, see 4.3.2.2
Triggering.
l Decision phase:
The RNC determines whether to allow the UE to be redirected or handed over to an LTE
cell. For details, see 4.3.2.3 UE Redirections or Handovers to LTE.
l Measurement phase:
The RNC determines whether to start an LTE measurement, deliver the measurement
control message, and process the measurement result. For details, see 4.3.2.4
Measurements.
l Execution phase:
The RNC determines which procedure to trigger (measurement-based redirection, blind
redirection, or handover). For details, see 4.3.2.5 Decision and Execution.
4.3.2.2 Triggering
Upon receiving an event 2D or 1F measurement report from a UE, the RNC determines
whether to allow a coverage-based UMTS-to-LTE PS redirection or handover. For details
about event 2D and event 1F, see Handover Feature Parameter Description.
l The general switch for UMTS-to-LTE PS interoperability has been turned on, which is
controlled by HO_LTE_PS_OUT_SWITCH under the HoSwitch(BSC6900,BSC6910)
parameter.
l For redirections: The coverage-based UMTS-to-LTE PS redirection switch is set to on.
That is, HO_U2L_COV_PS_REDIRECT_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter is selected.
l For handovers:
The coverage-based UMTS-to-LTE PS handovers switch is set to on. That is,
HO_U2L_COV_PS_HO_SWITCH under the HoSwitch1(BSC6900,BSC6910)
parameter is selected, and neighboring LTE cells are configured. In addition,
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter is not selected.
6. A UE not subscribing to LTE services is not allowed to perform any redirection or
handover to LTE. For a UE not subscribing to LTE services, the CN delivers a RAB
ASSIGNMENT REQUEST message containing the E-UTRAN Service Handover IE,
which informs the RNC that the UE cannot be handed over or redirected to LTE. If the
CN cannot deliver this information, the RNC learns about LTE subscriber information as
follows:
If RESERVED_SWITCH_11_BIT26 under the RsvSwitch11(BSC6900,BSC6910)
parameter is selected, the RNC learns about LTE subscriber information. That is, the
RNC records UEs who were handed over or redirected from LTE and labels these UEs as
LTE subscribers. Coverage-based UMTS-to-LTE redirections or handovers can be
performed only on these UEs.
For the method of identifying a UE redirected or handed over from LTE to UMTS, see
"Identifying a UE Redirected or Handed over from LTE to UMTS" in 4.3.3.6 Anti-ping-
pong Measures.
4.3.2.4 Measurements
Overview
When event 2D is triggered and the UE supports measurement of the neighboring LTE, GSM,
or inter-frequency cells, the RNC determines the target networks for measurements, sends the
measurement control message to the UE, and then processes the measurement results. The
target networks include the LTE, GSM, and inter-frequency networks. If an LTE measurement
is required, the RNC sends the measurement control messages to the UE and then processes
the measurement results. For details, see descriptions of the measurement control message
and measurement result processing in Selecting the Frequencies Carried in the
Measurement Control Message and Measurement Result Processing.
When event 1F is triggered, the RNC does not start measurements. Instead, it determines
whether to shift the UE to the LTE network through a blind redirection or to a GSM network
or inter-frequency UMTS network through a blind handover. For details about whether the
RNC shifts the UE to the LTE network through a blind redirection, see 4.3.2.5 Decision and
Execution. For details about whether the RNC shifts the UE to the GSM network or inter-
frequency UMTS network through a blind handover, see Handover Feature Parameter
Description. If conditions for both blind redirection to LTE and blind handover to GSM or
UMTS are met, the RNC performs the subsequent operation in a descending order of priority
as follows: intra-RAT blind handover within the UMTS system > blind redirection to LTE >
blind handover to GSM. In this section, the RNC determines whether the UE performs
measurements on LTE cells. U2LTEMeasTime(BSC6900,BSC6910) specifies the LTE
measurement duration by the UE.
The measurement control message sent by the RNC contains the following LTE-specific
information:
l Reporting mode of measurement reports
A UE can periodically send measurement reports periodically or in 3A event-triggered
reporting mode. The LTEReportMode(BSC6900,BSC6910) parameter specifies which
reporting mode is used. The LTEPeriodReportInterval(BSC6900,BSC6910) parameter
specifies the interval at which the measurement reports are reported.
l Information about to-be-measured neighboring cells or frequencies. For details, see
Selecting the Frequencies Carried in the Measurement Control Message.
l Measured item
The measured item for the LTE network can be RSRP or RSRQ. If a measurement report
is triggered by an event, which measurement quantity (RSRP or RSRQ) is to be reported
is determined by the LTEMeasQuanOf3A(BSC6900,BSC6910) parameter. If
measurement reports are periodically reported, both the RSRP and RSRQ values are
included in the measurement reports.
l For details about measurement event-related parameters, see Measurement Result
Processing.
When TAC_FUNC is set to Special_User_Enhance and
SpecUserFunctionSwitch4(BSC6900,BSC6910) is set to
SPECUSER_GUL_CM_LIMIT_SWITCH, a UE in the terminal blacklist cannot
perform compressed mode measurement on neighboring GSM, UMTS, and LTE cells
simultaneously. When this switch is turned on and the UE enters the compressed mode,
the UE measures first neighboring GSM and UMTS cells and then neighboring LTE
cells.
When TAC_FUNC is set to Special_User_Enhance and
SPECUSER_FORBID_U2L_MEASUREMENT_SWITCH under
SpecUserFunctionSwitch2(BSC6900,BSC6910) is selected, UEs in the terminal
blacklist cannot perform compressed mode measurement on neighboring LTE cells.
Event 2D/2F
The UE requests are triggered by events 2D and 2F which are defined as follows:
l Event 2D is when the measurement quantity (RSRP or RSRQ) is less than the threshold
for event 2D, which triggers a request for additional measurement reports.
l Event 2F is when the measurement quantity (RSRP or RSRQ) exceeds the threshold for
event 2F, which triggers a request that the RNC stop sending measurement reports.
For a coverage-based UMTS-to-LTE redirection or handover, the 2D and 2F thresholds used
depend on if the UMTS cells on a network with the GSM or LTE cells use the same or
different frequencies.
l Same frequencies: The RNC uses the 2D and 2F thresholds of the GSM or LTE target
network.
l Different frequencies: The RNC determines what 2D and 2F thresholds to use based on
the setting of the uses the CoexistMeasThdChoice(BSC6900,BSC6910) parameter of the
ADD UCELLHOCOMM or SET UHOCOMM command. The parameter can be set to
one of the following values:
– COEXIST_MEAS_THD_CHOICE_INTERFREQ: The RNC selects inter-
frequency UMTS cell parameters based on the threshold for event 2D and the
threshold for event 2F.
During cross-Iur handovers or redirections, the SPID-based dedicated priorities for the frequencies
of the neighboring LTE cells are forwarded by the DRNC to the SRNC. The SRNC considers that
these SPID-based dedicated priorities are equal to each other (all neighboring LTE cells have the
lowest SPID-based dedicated priority). Therefore, it does not use the SPID-based dedicated
priority to filter or rank the neighboring LTE cells.
For the configuration of parameters related to IMSI-based dedicated frequency priorities, see
IMSI-based Mobility Management for Multiple Operators Feature Parameter Description.
7. Select LTE frequencies according to IMSI-based dedicated frequency priorities.
The RNC obtains set D by collecting the LTE frequencies that meet the following
conditions: The LTE frequencies belong to the frequency priority group (specified by the
RatFreqPriorityGroupId(BSC6900,BSC6910) parameter) corresponding to the UE's
IMSI. The U2LConnTargetFreqInd(BSC6900,BSC6910) parameter is set to TRUE for
the LTE frequencies.
Then the RNC obtains the intersection set of set C and set D. From the intersection set,
the RNC selects a maximum of four LTE FDD frequencies and then a maximum of four
LTE TDD frequencies according to IMSI-based dedicated priorities of the LTE
frequencies. The selected frequencies are to be measured. The IMSI-based dedicated
priority of an LTE frequency is specified by the DediPriority(BSC6900,BSC6910)
parameter.
8. After the preceding steps, if the set still contains more than four frequencies, frequencies
are selected based on the setting of
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter.
a. If this switch is turned on, the RNC selects a maximum of four LTE FDD
frequencies and then a maximum of four LTE TDD frequencies according to
absolute priorities of the LTE frequencies. The selected frequencies are to be
measured. The absolute priority of a frequency is specified by the
NPriority(BSC6900,BSC6910) parameter in the ADD
UCELLNFREQPRIOINFO command.
b. If this switch is turned off, the RNC selects a maximum of four LTE FDD
frequencies and then a maximum of four LTE TDD frequencies according to the
sequence in which the frequencies are configured in the LTECellIndex parameter.
The selected frequencies are to be measured.
If the UE simultaneously reports the measurement reports on RSRP and RSRQ, both measurement
results must satisfy the preceding formula before a UMTS-or-LTE redirection or handover.
The following table lists the meanings of the variables involved in the decision conditions in
the two reporting modes.
NOTE
If the RNC receives the measurement report on the inter-RAT neighboring GSM cell or inter-frequency
neighboring UMTS cell first, it determines whether to perform a handover to the GSM network or inter-
frequency UMTS network. For details about the handover to the GSM network or inter-frequency
UMTS network, see the section "Coverage-based or QoS-based Handover" in Handover Feature
Parameter Description
The preceding parameters can be either RNC-level parameters or cell-level parameters. The
RNC-level parameters are set by running the SET UU2LTEHOCOV command, and the cell-
level parameters are set by running the ADD UCELLU2LTEHOCOV command. However,
the cell-level parameters take priority.
The penalty timer can be set either by an RNC-level or a cell-level parameter. The RNC-level
parameter is the PenaltyTimerForCMFailCov(BSC6900,BSC6910) parameter in the RNC
MML command SET UHOCOMM. The cell-level parameter is the
PenaltyTimerForCMFailCov(BSC6900,BSC6910) parameter in the RNC MML command
ADD UCELLHOCOMM.
l If the non-neighboring cell-based redirection switch is off, the RNC checks if the UE
supports UMTS-to-LTE PS handovers.
– Supporting: If the UE supports UMTS-to-LTE PS handovers, the
SuppPSHOFlag(BSC6900,BSC6910) parameter for the target LTE cell is set to
Support, and the coverage-based UMTS-to-LTE PS handover switch is on (that is,
HO_U2L_COV_PS_HO_SWITCH under HoSwitch1(BSC6900,BSC6910) is
selected), then the RNC performs a coverage-based UMTS-to-LTE PS handover
using the cell with the best signal quality as the target.
– Not supporting: If the UE does not support UMTS-to-LTE PS handovers, the
SuppPSHOFlag(BSC6900,BSC6910) parameter for the target LTE cell is set to
NotSupport, or the switch for coverage-based UMTS-to-LTE PS handover is off,
then the RNC determines whether the switch for coverage-based UMTS-to-LTE PS
redirection is on.
If the switch is on, the RNC performs a coverage-based UMTS-to-LTE PS
redirection based on the neighboring LTE cell. The target cell for redirection is the
preceding target cell.
If the switch is not selected, the RNC does not perform a coverage-based UMTS-to-
LTE PS redirection or handover.
Event 1F Is Triggered
l When both the switch for UMTS-to-LTE blind redirection
(U2lBlindRedirSwitch(BSC6900,BSC6910)) and the switch for coverage-based UMTS-
to-LTE PS redirection are on, the RNC checks whether the switch for non-neighboring
cell-based redirection is on.
– If the switch for non-neighboring-cell-based redirection has been turned on, the UE
performs a non-neighboring-cell-based blind redirection.
– If this switch is turned off, the RNC decides which type of handover or redirection
to perform based on the following criteria:
If the serving cell of the UE has target LTE cells configured for blind redirection,
the UE performs a neighboring-cell-based blind redirection.
If there are not, the UE does not perform a coverage-based UMTS-to-LTE PS
redirection or handover.
l When the switch for UMTS-to-LTE blind redirection or the switch for coverage-based
UMTS-to-LTE PS redirection is turned off, the RNC does not perform a coverage-based
UMTS-to-LTE PS redirection or handover.
NOTE
For details about the procedure for UMTS-to-LTE PS redirections or handovers, see section
4.3.5 UMTS-to-LTE PS Redirection and Handover Procedures.
HoSwitch2(BSC6900,BSC6910)
parameter are selected whereas the
HO_SPID_MM_SWITCH check box
under the
HoSwitch1(BSC6900,BSC6910)
parameter is not selected, the RNC
selects the neighboring cell with the
highest IMSI-based dedicated priority. If
more than one neighboring cell has the
same highest IMSI-based dedicated
priority, the RNC selects the neighboring
cell with highest signal quality. The
IMSI-based dedicated priority of an LTE
frequency is specified by the
DediPriority(BSC6900,BSC6910)
parameter. For details about the IMSI-
based dedicated priority, see IMSI-based
Mobility Management for Multiple
Operators Feature Parameter
Description.
l If both
PERFENH_IRAT_COV_HO_NCELL
_PRE_SWITCH under
PerfEnhanceSwitch2(BSC6900,BSC69
10) is selected whereas
HO_SPID_MM_SWITCH under
HoSwitch1(BSC6900,BSC6910)and
HO_IMSI_MM_SWITCH under
HoSwitch2(BSC6900,BSC6910) are not
selected, the RNC selects the
neighboring cell with the highest IMSI-
based dedicated priority. If more than
one neighboring cell has the same
highest IMSI-based dedicated priority,
the RNC selects the neighboring cell
with the highest signal quality. The
absolute priority of an LTE frequency is
specified by the
NPriority(BSC6900,BSC6910)
parameter.
When the UL Unified Overload Control
feature is enabled, the RNC selects the
neighboring cell that meets the preceding
conditions from those not carrying heavy
traffic preferentially.
l LTE: The absolute priorities of LTE frequencies are configured using the
NPriority(BSC6900,BSC6910) parameter in the ADD UCELLNFREQPRIOINFO
command. The parameter value 0 represents the lowest priority and 7 represents the
highest priority.
l GSM: The absolute priorities of GSM frequencies are configured using the
HOPrio(BSC6900,BSC6910) parameter in the ADD U2GNCELL command. The
parameter value 0 represents the highest priority and 7 represents the lowest priority. If
GSM 900 MHz and GSM 1800 MHz networks are deployed in the same area and the
operator expects that UEs are preferentially handed over to the GSM 1800 MHz
network, it is recommended that the priorities of neighboring GSM 1800 MHz cells be
set to 0-3 whereas those of neighboring GSM 900 MHz cells be set to 4-7.
4.3.3.1 Overview
Figure 4-3 shows the service-based UMTS-to-LTE PS redirection or handover process.
l Measurement phase
The RNC determines whether to start an LTE measurement, deliver the measurement
control message, and process the measurement result. For details, see 4.3.3.4
Measurements on LTE Signal Quality.
l Execution phase
The RNC determines which procedure to trigger (measurement-based redirection, blind
redirection, or handover). For details, see 4.3.3.5 Decision and Execution.
4.3.3.2 Triggering
Service-based UMTS-to-LTE PS redirection or handover can be triggered during the
following processes:
l RB setup: If HO_LTE_SERVICE_BLIND_FIRST_SWITCH under the
U2LServAlgoSwitch(BSC6900,BSC6910) parameter is selected or
U2lBlindRedirSwitch(BSC6900,BSC6910) is set to ON (the UE does not support
measurement), a blind redirection is triggered upon reception of a RAB Assignment
Request message from the CN. If HO_LTE_SERVICE_BLIND_FIRST_SWITCH
under the U2LServAlgoSwitch(BSC6900,BSC6910) parameter is deselected and the UE
supports measurement, a measurement-based handover or redirection is triggered upon
reception of a Radio Bearer Setup Complete message from the UE.
NOTE
If the blind-handover-based non-periodic inter-RAT DRD is triggered during the RAB setup
process and RESERVED_SWITCH_21_BIT17 under the RsvSwitch21(BSC6900,BSC6910)
parameter is tuned on, the RNC does not measure the number of service setup attempts or the
number of service setup failures.
l RB reconfiguration: The RNC receives a RADIO BEARER SETUP COMPLETE
message from the UE, except during the D2F and D2P state transition processes.
NOTE
A UE not subscribing to LTE services is not allowed to perform any redirection or handover
to LTE. Generally, the E-UTRAN Service Handover IE in a RAB ASSIGNMENT REQUEST
message from the CN informs the RNC that the UE cannot be handed over or redirected to
LTE. If the CN does not support using this IE to indicate the UE's capability, the RNC learns
about LTE subscriber information as follows:
When the preceding switch is selected, some LTE subscribers camp on UMTS networks during the
initial phase of LTE subscriber information learning. After the RNC has obtained LTE subscriber
information, the number of LTE subscribers camping on UMTS networks is significantly reduced, and
the success rate of service-based UMTS-to-LTE redirections or handovers is increased. The RNC learns
about LTE subscriber information even when service-based UMTS-to-LTE redirections or handovers do
not take effect.
A subscriber recorded by the RNC as an LTE subscriber will not be automatically deleted from the
record when it becomes a UMTS subscriber.
After the RNC is upgraded, the LTE subscriber information recorded before the upgrade is cleared and
the RNC must learn and record the information again, affecting the counters related to the service-based
UMTS-to-LTE handover or redirection.
l If RESERVED_SWITCH_11_BIT27 under the RsvSwitch11(BSC6900,BSC6910)
parameter is not selected and
PERFENH_PERMIT_U2L_ONLY_UE_FROM_L_SWITCH under the
PerfEnhanceSwitch2(BSC6900,BSC6910) parameter is selected, service-based UMTS-
to-LTE redirections or handovers can be performed only on subscribers who were
handed over or redirected from LTE.
NOTE
Selecting this item may cause some LTE terminals to camp on UMTS networks.
For the method of identifying a UE redirected or handed over from LTE to UMTS, see
"Identifying a UE Redirected or Handed over from LTE to UMTS" in 4.3.3.6 Anti-ping-pong
Measures.
Overview
If a UE in connected mode supports LTE measurement, the RNC triggers an LTE
measurement. If the UE does not support LTE measurement, the RNC enables the UE to
directly perform blind redirection. For details, see 4.3.3.5 Decision and Execution.
The measurement control message sent by the RNC contains the following LTE-specific
information:
If an LTE measurement is required, the RNC sends the measurement control messages to the
UE and then processes the measurement results. For details, see descriptions of the
measurement control message and measurement result processing in Selecting the
Frequencies Carried in the Measurement Control Message and Measurement Result
Processing. U2LTEMeasTime(BSC6900,BSC6910) specifies the LTE measurement duration
by the UE.
If set F still contains more than four frequencies, the RNC selects a maximum of four
LTE FDD frequencies and then a maximum of four LTE TDD frequencies according to
SPID-based dedicated priorities of the LTE frequencies. The selected frequencies are to
be measured. The SPID-based dedicated priority of an LTE frequency is specified by the
DediPriority(BSC6900,BSC6910) parameter.
NOTE
During cross-Iur handovers or redirections, the SPID-based dedicated priorities for the frequencies
of the neighboring LTE cells are forwarded by the DRNC to the SRNC. The SRNC considers that
these SPID-based dedicated priorities are equal to each other (all neighboring LTE cells have the
lowest SPID-based dedicated priority). Therefore, it does not use the SPID-based dedicated
priority to filter or rank the neighboring LTE cells.
If SPIDBasedU2LPSHoMode(BSC6900,BSC6910) is set to NOT_FILTERED, the
RNC does not filter LTE frequencies according to the SPID-based dedicated frequency
priorities but continues with step 10.
8. Determine whether to filter LTE frequencies according to the IMSI-based dedicated
frequency priorities.
If the following conditions are met, the RNC filters LTE frequencies according to the
IMSI-based dedicated frequency priorities by performing step 9. If not, the RNC
performs step 10:
– HO_IMSI_MM_SWITCH under HoSwitch2(BSC6900,BSC6910) is selected.
– The RNC has obtained the UE's IMSI and the UE's IMSI is included in the IMSI
segment corresponding to ImsiGrpIndex(BSC6900,BSC6910).
– For the IMSI segment that includes the UE's IMSI, related parameters such as
RatFreqPriorityGroupId(BSC6900,BSC6910) have been configured. The
dedicated priority set (corresponding to
RatFreqPriorityGroupId(BSC6900,BSC6910)) for the UMTS/LTE frequencies is
not empty.
NOTE
For the configuration of parameters related to IMSI-based dedicated frequency priorities, see
IMSI-based Mobility Management for Multiple Operators Feature Parameter Description.
9. Select LTE frequencies according to IMSI-based dedicated frequency priorities.
The RNC obtains set F by collecting the LTE frequencies that meet the following
conditions: The LTE frequencies belong to the frequency priority group (specified by the
RatFreqPriorityGroupId(BSC6900,BSC6910) parameter) corresponding to the UE's
IMSI. The U2LConnTargetFreqInd(BSC6900,BSC6910) parameter is set to TRUE for
the LTE frequencies.
Then the RNC obtains the intersection set of set F and set E. From the intersection set,
the RNC selects a maximum of four LTE FDD frequencies and then a maximum of four
LTE TDD frequencies according to IMSI-based dedicated priorities of the LTE
frequencies. The selected frequencies are to be measured. The IMSI-based dedicated
priority of an LTE frequency is specified by the DediPriority(BSC6900,BSC6910)
parameter.
10. the RNC filters the frequencies based on the setting of
HO_U2L_CONN_PRIO_SWITCH under HoSwitch1(BSC6900,BSC6910):
If the UMTS-to-LTE connected mode priority switch is turned on, frequencies are
selected based on the setting of
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter.
– If this switch is turned on, the RNC selects a maximum of four LTE FDD
frequencies and then a maximum of four LTE TDD frequencies according to
absolute priorities of the LTE frequencies. The selected frequencies are to be
measured. The absolute priority of a frequency is specified by the
NPriority(BSC6900,BSC6910) parameter in the ADD
UCELLNFREQPRIOINFO command.
– If this switch is turned off, the RNC selects a maximum of four LTE FDD
frequencies and then a maximum of four LTE TDD frequencies according to the
sequence in which the frequencies are configured. The selected frequencies are to
be measured.
If the UMTS-to-LTE connected mode priority switch is turned on, the RNC selects a
maximum of four LTE FDD frequencies and then a maximum of four LTE TDD
frequencies according to connected-mode priorities of the LTE frequencies. The selected
frequencies are to be measured. The connected mode priority of a frequency is specified
by the NPriorityConnect(BSC6900,BSC6910) parameter.
NOTE
l For cross-Iur measurement, the UMTS-to-LTE connected-mode priority does not take effect
and the SRNC processes the UMTS-to-LTE connected-mode priorities of frequencies
corresponding to neighboring LTE cells under the DRNC as the lowest priorities.
l When both the UE's best cell and the LTE frequency's priority change, the measurement
control message will not be re-delivered.
NOTE
If the UE simultaneously sends the measurement reports on RSRP and RSRQ, both measurement results
must satisfy the preceding formula before the decision and execution of a U2L redirection or handover.
The following table lists the meanings of the variables involved in the condition.
These parameters can be configured at the RNC or cell level in the SET UU2LTEHONCOV
command or the ADD UCELLU2LTEHONCOV command, respectively. If a parameter is
configured on both the cell and RNC levels, the cell-level value takes precedence.
with the highest priority. If the frequencies of multiple cells have the highest
priority, the RNC selects the frequency of the cell with the best signal quality.
If the service-based UMTS-to-LTE PS redirection switch is turned off, the RNC
does not perform a service-based UMTS-to-LTE PS redirection or handover.
When the UMTS-to-LTE connected mode priority switch is turned on, the LTE
frequency priority to be used is determined by the setting of HO_SPID_MM_SWITCH
under HoSwitch1(BSC6900,BSC6910) as well as the setting of
DediPriority(BSC6900,BSC6910) or NPriorityConnect(BSC6900,BSC6910):
– When HO_SPID_MM_SWITCH under HoSwitch1(BSC6900,BSC6910) is
selected, the LTE frequency uses the SPID-based dedicated priority, which is
specified by the DediPriority(BSC6900,BSC6910) parameter.
– When HO_SPID_MM_SWITCH under the parameter is not selected and
HO_IMSI_MM_SWITCH under the HoSwitch2(BSC6900,BSC6910) parameter
is selected, the LTE frequency uses the IMSI-based dedicated priority, which is
specified by the DediPriority(BSC6900,BSC6910) parameter.
– When neither HO_SPID_MM_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter nor HO_IMSI_MM_SWITCH under
the HoSwitch2(BSC6900,BSC6910) parameter is selected, the LTE frequency uses
the connected mode priority, which is specified by the
NPriorityConnect(BSC6900,BSC6910) parameter.
PS redirection is turned off, the RNC does not perform any service-based UMTS-to-LTE PS
redirection or handover.
NOTE
For details about frequency selection policies of blind redirections and measurement-based redirections,
see 4.3.2.5 Decision and Execution.
If BlindFlag(BSC6900,BSC6910) is set to TRUE, the neighboring LTE cell configured by running the
ADD ULTENCELL command can serve as a neighboring cell for blind redirections.
For details about the procedure for UMTS-to-LTE PS redirections or handovers, see section
4.3.5 UMTS-to-LTE PS Redirection and Handover Procedures.
4.3.4.1 Overview
If the LDR action of UMTS-to-LTE PS handover is triggered when the UMTS cell is in the
basic congestion state, the RNC enables UL or GUL multi-mode UEs carrying only PS
services to be redirected or handed over to an LTE cell to facilitate inter-RAT load balancing
and improve user experience. For more information about the conditions for triggering basic
congestion and the corresponding LDR actions, see descriptions of load reshuffling in Load
Control Feature Parameter Description.
Figure 4-5 shows the load-based U2L PS redirection or handover process.
l Trigger phase
The RNC determines whether to trigger a load-based redirection or handover to LTE. For
details, see 4.3.4.2 Triggering.
l User selection for LDR
The RNC selects a user for LDR. For details, see 4.3.4.3 UE Selection for LDR.
l Decision phase
The RNC determines whether to allow the UE to be redirected or handed over to an LTE
cell. For details, see 4.3.4.4 UE Redirections or Handovers to LTE.
l Measurement phase
The RNC determines whether to start an LTE measurement, deliver the measurement
control message, and process the measurement result. For details, see 4.3.4.5
Measurements.
l Execution phase
The RNC determines which procedure to trigger (measurement-based redirection, blind
redirection, or handover). For details, see 4.3.4.6 Decision and Execution.
4.3.4.2 Triggering
When the UMTS cells are in the basic congestion state and an LDR action of UMTS-to-LTE
PS handover is triggered, the RNC determines whether the UE can be redirected or handed
over to LTE.
The related switches are set to on by running the command ADD UCELLLDR or
MOD UCELLLDR command.
Either of the following is true: The HO_U2L_LOAD_PS_REDIRECT_SWITCH
check box under the HoSwitch1(BSC6900,BSC6910) parameter is selected. The
HO_U2L_LOAD_PS_HO_SWITCH check box under the
HoSwitch1(BSC6900,BSC6910) parameter is selected but the
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH check box under
this parameter is not selected.
6. A UE not subscribing to LTE services is not allowed to perform any redirection or
handover to LTE. Generally, the E-UTRAN Service Handover IE in a RAB
ASSIGNMENT REQUEST message from the CN informs the RNC that the UE cannot
be handed over or redirected to LTE. If the CN does not support using this IE to indicate
the UE's capability, the RNC learns about LTE subscriber information as follows:
If RESERVED_SWITCH_11_BIT28 under the RsvSwitch11(BSC6900,BSC6910)
parameter is selected, the RNC learns about LTE subscriber information. That is, the
RNC records subscribers who were handed over or redirected from LTE and labels these
subscribers as LTE subscribers. Load-based UMTS-to-LTE redirections or handovers can
be performed only on these subscribers.
NOTE
When the preceding switch is selected, some LTE subscribers camp on UMTS networks during the
initial phase of LTE subscriber information learning. After the RNC has obtained LTE subscriber
information, the number of LTE subscribers camping on UMTS networks is significantly reduced,
and the success rate of load-based UMTS-to-LTE redirections or handovers is increased. The RNC
learns about LTE subscriber information even when load-based UMTS-to-LTE redirections or
handovers do not take effect.
A subscriber recorded by the RNC as an LTE subscriber will not be automatically deleted from the
record when it becomes a UMTS subscriber.
For the method of identifying a UE redirected or handed over from LTE to UMTS, see
"Identifying a UE Redirected or Handed over from LTE to UMTS" in 4.3.3.6 Anti-ping-
pong Measures.
4.3.4.5 Measurements
If a UE in connected mode supports LTE measurement, the RNC triggers an LTE
measurement. Otherwise, the RNC enables the UE to directly perform blind redirection. For
details, see section 4.3.4.6 Decision and Execution.
When TAC_FUNC is set to Special_User_Enhance and
SpecUserFunctionSwitch4(BSC6900,BSC6910) is set to
SPECUSER_GUL_CM_LIMIT_SWITCH, a UE in the terminal blacklist cannot perform
compressed mode measurement on neighboring GSM, UMTS, and LTE cells simultaneously.
When this switch is turned on and the UE enters the compressed mode, the UE measures first
neighboring GSM and UMTS cells and then neighboring LTE cells.
When TAC_FUNC is set to Special_User_Enhance and
SPECUSER_FORBID_U2L_MEASUREMENT_SWITCH under
SpecUserFunctionSwitch2(BSC6900,BSC6910) is selected, UEs in the terminal blacklist
cannot perform compressed mode measurement on neighboring LTE cells.
If the RNC determines that the UE performs an LTE measurement, it sends the UE a
measurement control message instructing the UE to measure the signal quality of the LTE
cells according to the LTE frequencies contained in the message. During load-based and
service-based U2L PS redirections or handovers, the same methods are used for selecting
NOTE
For details about frequency selection policies of blind redirections and measurement-based redirections,
see 4.3.2.5 Decision and Execution.
If BlindFlag(BSC6900,BSC6910) is set to TRUE, the neighboring LTE cell configured by running the
ADD ULTENCELL command can serve as a neighboring cell for blind redirections.
For details about the procedure for UMTS-to-LTE PS redirections or handovers, see section
4.3.5 UMTS-to-LTE PS Redirection and Handover Procedures.
l Existence of the IE indicates that the UE is not redirected from LTE to UMTS.
Therefore, if the IE exists, the RNC does not perform any special processing.
l Non-existence of the IE indicates that the UE is redirected from LTE to UMTS.
Therefore, if the IE does not exist, the UE cannot be switched to the LTE network
through redirection or blind redirection during the ongoing service (before the current
RRC connection is released).
PSInterU2LLDHO PSInterU2LLDHO
CodeAdj(Code adjust) -
As shown in Figure 4-7, the primary steps in the UMTS-to-LTE PS redirection procedure are
as follows:
1. The RNC sends the UE an RRC CONNECTION RELEASE message that carries LTE
frequencies.
2. After the RRC connection is released, the UE falls back to the UMTS network and enters
the idle state. Then, the UE reselects an LTE cell and reestablishes a PS service in the
LTE network.
NOTE
If some LTE cells are configured as blacklisted cells using the ADD UCELLNFREQPRIOINFO
command and PERFENH_U2L_REDIR_WITH_BLACK_CELL_SWITCH under the
PerfEnhanceSwitch3(BSC6900,BSC6910) parameter in the SET UCORRMPARA command is set to
ON, the RRC CONNECTION RELEASE message contains not only an LTE frequency but also those
blacklisted cells working at the LTE frequency so that UEs cannot be handed over to the blacklisted cells
based on redirections. If no LTE cells are configured as blacklisted cells or
PERFENH_U2L_REDIR_WITH_BLACK_CELL_SWITCH is set to OFF, the RRC
CONNECTION RELEASE message does not contain blacklisted cells working at the LTE frequency.
As shown in Figure 4-8, the primary steps in the UMTS-to-LTE PS handover procedure are
as follows:
1. The RNC sends the serving GPRS support node (SGSN) on the UMTS core network a
Relocation Required message, which contains information about the target LTE cell.
2. The SGSN on the UMTS core network forwards the Relocation Request message to the
mobility management entity (MME) on the LTE core network. The MME initiates a
handover to the LTE network.
3. After preparations for the handover are complete on the LTE network, the MME informs
the SGSN by sending a Relocation Response message.
4. Upon receiving the Relocation Command message from the SGSN, the RNC instructs
the UE to hand over to the target LTE network.
l U2LPhyChFailNum(BSC6900,BSC6910) and
PenaltyTimeForPhyChFail(BSC6900,BSC6910) parameters in the RNC MML
command SET UU2LTEHOCOV: parameters related to penalty of coverage-based
UMTS-to-LTE handover failures
l U2LPhyChFailNum(BSC6900,BSC6910) and
PenaltyTimeForPhyChFail(BSC6900,BSC6910) parameters in the RNC MML
command SET UU2LTEHONCOV: parameters related to penalty of load- or service-
based UMTS-to-LTE handover failures
Parameters indicating the time for measuring LTE cells are as follows:
1. During a UMTS-to-LTE blind redirection, the RNC saves the UE's IMSI and RRC
connection release time after receiving an RRC CONNECTION RELEASE message
from the UE.
NOTE
the UE's IMSI included in the Common ID message, the reception time of this message,
and the previously mentioned RRC connection release time.
NOTE
The preceding mechanism does not consider whether the UE initially accesses the network on the
LTE or UMTS side. Therefore, the IMSI of the UE is queried regardless of whether the UE
initiates the service after initially accessing the UMTS network or after returning to the UMTS
network from the LTE network.
3. If the UE has performed a blind redirection within last 30 seconds, the RNC starts a
penalty timer for the blind redirection. Before the penalty timer expires, the RNC
prohibits the UE from performing UMTS-to-LTE blind redirections, regardless of
whether these blind redirections are triggered by service, load, or event 1F. The penalty
timer's duration is specified by the U2LBlindRedirPingpongTimer(BSC6900,BSC6910)
parameter in the SET UHOCOMM command.
4.3.8.1 Overview
With the function of data forwarding during UMTS-to-LTE handovers, the RNC sends data to
the eNodeB through the transport layer to ensure that no packets are lost during the
handovers. For details about this function, see section 8.4.1 "Handover Preparation" in 3GPP
TS 36.413 V11.4.0. This function can be enabled by setting
U2L_RELOC_MSG_TAKE_ERAB_SWITCH under the
OptimizationSwitch5(BSC6900,BSC6910) parameter in the RNC MML command SET
URRCTRLSWITCH to ON. In addition, related routes and user plane data channel also
need to be configured to enable the function.
Data forwarding involves two scenarios:
l The direct tunnel function is not enabled on the RNC. In this scenario, the data
forwarding path is RNC -> SGSN -> LTE SGW -> eNodeB. The routes and UP data
channels between the RNC and SGSN usually have been configured. Therefore, only the
routes and UP data channels between the LTE SGW and SGSN need to be configured on
the CN side.
l The direct tunnel function is enabled on the RNC. In this scenario, the data forwarding
path is RNC -> LTE SGW -> eNodeB. Therefore, on the RNC side, you only need to
configure a route from the RNC to the LTE SGW using the MML command ADD IPRT
and a UP data channel using the MML command ADD IPPATH (on the BSC6900) or
ADD IPPOOL (on the BSC6910).
The data forwarding function depends on the lossless SRNS relocation capabilities of UEs. A
UE supports lossless SRNS relocation if the losslessSRNS-RelocationSupport field is set to
TRUE in the PDCP Capability indicator of the UE RadioAccessCapability IE in the RRC
CONNECT SETUP COMPLETE message. If the field is set to FALSE, the UE does not
support lossless SRNS relocation and the data forwarding function does not take effect on the
UE.
eNodeB. For details about this IE, see section 9.2.3.14 "DL Forwarding" in 3GPP TS
36.413 V11.4.0.
2. Upon receiving the Source to Target Transparent Container message, the eNodeB
includes the "DL GTP-TEID" and "DL Transport Layer Address" IEs in a HANDOVER
REQUEST ACKNOWLEDGE message, which is then sent to the CN. For details about
this step, see section 8.4.2 "Handover Resource Allocation" in 3GPP TS 36.413 V11.4.0.
3. Upon receiving the RELOCATION COMMAND message, the RNC applies for a GTP-
U tunnel to forward data to the eNodeB.
set up the PS service on the frequency that is preferential for PS services. If a CS service is set
up for the UE later, DRD cannot be performed because the DRD switch for combined services
is usually set to off. Therefore, the UE cannot be carried on a frequency that is preferential for
CS services, which may affect the speech quality of the CS service.
When PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWITCH under the
PerfEnhanceSwitch4(BSC6900,BSC6910) parameter in the MML command SET
UCORRMPARA is set to ON, UEs that perform CSFB through redirections are identified
and their first PS BE services are processed as those in CS+PS combined services. In
addition, a CS service performed by the UE is regarded as the highest-priority service for
selection of the target cell during the process of DRD based on traffic steering.
If RESERVED_SWITCH_14_BIT12 under RsvSwitch14(BSC6900,BSC6910) is selected
in the SET UALGORSVPARA command, this function is enhanced. Specifically, an
optimized judgment mechanism for the cause values of RRC connection setup is used based
on the existing method of identifying CSFB UEs. In addition, only a PS service initiated
within 10s after the relevant RRC connection is set up and a CS service are treated as a CS
+PS combined service. For the method of identifying CSFB UEs, see 5.5 CSFB Delay
Reduction.
5 CSFB
5.1 Overview
When a UE on an LTE network initiates a CS service, the CSFB feature migrates the UE to a
UMTS network so that the UE can perform the CS service on the UMTS network.
As specified in the 3GPP protocol, an LTE-to-UMTS CSFB can be performed through either
a redirection or PS handover:
The RRC setup success rate of LTE-to-UMTS CSFB through redirections can be calculated
using the following formula: VS.RRC.SuccConnEstab.CSFB(BSC6900,BSC6910)/
VS.RRC.AttConnEstab.CSFB(BSC6900,BSC6910)
The RAB setup success rate of LTE-to-UMTS CSFB through redirections can be calculated
using the following formula: VS.RAB.SuccEstabCS.CSFB.Redir(BSC6900,BSC6910)/
VS.RAB.AttEstabCS.CSFB.Redir(BSC6900,BSC6910)
The RAB assignment success rate of LTE-to-UMTS CSFB through handovers can be
calculated using the following formula:
VS.RAB.SuccEstabCS.CSFB.PSHO(BSC6900,BSC6910)/
VS.RAB.AttEstabCS.CSFB.PSHO(BSC6900,BSC6910)
For details about LTE-to-UMTS CSFB, see the LTE document CS Fallback Feature
Parameter Description.
Based on the CSFB feature, Huawei provides the post-CSFB service processing solution and
optimized CSFB process.
Post-CSFB service processing mainly refers to the UMTS-to-LTE fast return function, which
enables UEs to quickly return to the LTE network after fall back to the UMTS network and
finish CS services.
l The CSFB guarantee function is introduced for LTE emergency calls and normal calls on
the UMTS side. By reducing the rate of PS services or allowing resource preemption,
this function reserves resources and ensures successful access for PS handovers,
improving the call success rate.
l A series of CSFB delay reduction measures are introduced on the UMTS side to solve
problems of postponed voice service access and poor user experience, which is caused
by procedures of access, handover, and redirection on the LTE side.
l RAN16.0 introduces Ultra-Flash CSFB, a proprietary CSFB procedure on the UMTS
and LTE sides. This process is applicable when an IMS is not deployed and the eNodeB,
MME, MSC, and RNC are all provided by Huawei. This process prepares CS resources
in advance based on an SRVCC process, thereby reducing CSFB delay.
5.2.1 Overview
In an area jointly covered by UMTS and LTE networks, a UE accesses a UMTS cell due to
CSFB. When the UE finishes all services in the UMTS cell, it releases the RRC connection.
In versions earlier than RAN14.0, if the absolute priority of a neighboring LTE cell's
frequency is higher than that of the UMTS cell's frequency, the RRC CONNECTION
RELEASE message does not contain the frequency information about neighboring LTE cells.
As a result, the UE camps on a UMTS cell. If a neighboring LTE cell fulfills the cell
reselection conditions, the UE reselects the neighboring LTE cell. Before initiating UMTS-to-
LTE cell reselection, a UE needs to perform the following operations, which consume much
time:
The Fast Return from UMTS to LTE feature is introduced to reduce the time and improve user
experience.
This feature applies to the areas that are jointly covered by UMTS and LTE networks and
where the LTE network signal quality is satisfactory.
If the LTE network signal quality is poor, for example, when an RRC CONNECTION
RELEASE message contains information about n (a positive integer) LTE frequencies whose
signal quality is poor:
l UEs complying with a version earlier than 3GPP Release 10 select a suitable LTE cell
from the LTE cells using n LTE frequencies. The selection lasts for at most 10 seconds.
If no suitable LTE cell is found, these UEs select a suitable LTE cell from the LTE cells
using frequencies supported by these UEs. If a suitable LTE cell is still not found, these
UEs randomly camp on a suitable cell. For details, see section 8.5.2 Actions when
entering idle mode from connected mode in 3GPP TS 25.331 V10.8.0.
l UEs complying with 3GPP Release 10 or later select a suitable LTE cell from the LTE
cells using n LTE frequencies. The selection lasts for at most n seconds. If no suitable
LTE cell is found, these UEs select a suitable LTE cell from the LTE cells using
frequencies supported by these UEs. The selection lasts for 4 seconds. If a suitable LTE
cell is still not found, these UEs randomly camp on a suitable cell. For details, see
section 8.5.2 "Actions when entering idle mode from connected mode" in 3GPP TS
25.331 V10.9.0.
Note that the UE cannot process CS or PS services or CS+PS combined services while
searching for a suitable LTE cell.
The Fast Return from UMTS to LTE feature enables a UE that moves from an LTE cell to a
UMTS cell through CSFB to quickly return to the LTE network after the CS service is
finished.
The UMTS-to-LTE Fast Return function and Enhanced UMTS-to-LTE Fast Return function
are both based on blind redirection. That is, neither UMTS-to-LTE Fast Return nor Enhanced
UMTS-to-LTE Fast Return requires measurement. After the UE finishes the CS service, the
RNC immediately sends an RRC release message to redirect the UE to the LTE network.
Before enabling the Enhanced UMTS-to-LTE Fast Return function, you must enable the
UMTS-to-LTE Fast Return function. However, before enabling the UMTS-to-LTE Fast
Return function, you do not need to enable the Enhanced UMTS-to-LTE Fast Return function.
When LTE measurement-based fast return is enabled, the RNC triggers inter-RAT
measurement of LTE after a CS service is finished and delivers an RRC release message or
handover command to redirect or hand over the UE to LTE only if the measured LTE signal
quality meets the handover threshold. Compared with blind redirection-based fast return, this
type of fast return prevents the out-of-service problem of UEs due to LTE coverage holes.
The RSCP measurement-based fast return function is applicable where UMTS and LTE
networks share a site. This function starts RSCP measurement of the UMTS serving cell
during the CS service of a CSFB UE. If the measured RSCP value reaches a specific
threshold, blind redirection-based fast return can be performed after the CS service is
complete, which improves the success rate of blind redirections and reduces the impact of
LTE measurement in compressed mode.
The following figure shows how the RNC performs the procedure for UMTS-to-LTE fast
return mode selection.
2 Cell-level switch:
HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH under
HoSwitch1(BSC6900,BSC6910)
RNC-level switch:
HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH under
FastReturnToLTESwitch(BSC6900,BSC6910)
No. Parameter
3 Cell-level switch:
HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH under
FastReturnToLTESwitch(BSC6900,BSC6910)
RNC-level switch:
HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH under
HoSwitch1(BSC6900,BSC6910)
5 U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITCH under
OptimizationSwitch6(BSC6900,BSC6910)
6 PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH under
PerfEnhanceSwitch7(BSC6900,BSC6910)
In the preceding figure, optimization of the UMTS-to-LTE fast return process and enhanced
UMTS-to-LTE fast return process refers to that the RNC delivers the RRC CONNECTION
RELEASE message immediately after receiving an IU RELEASE COMMAND message
from the CS domain. For details, see 5.2.3 Enhanced UMTS-to-LTE Fast Return.
1. The RNC first determines that a UMTS/LTE UE is a CSFB UE if the UE meets either of
the following conditions:
– When the UE is moving from an LTE cell to a UMTS cell through a PS handover,
the RELOCATION REQUEST message contains a "cause" information element
(IE) whose value is "CS Fallback triggered (268)" or a "CSFB Information" IE
whose value is "CSFB" or "CSFB High Priority."
– When the UE is moving from an LTE cell to a UMTS cell through a redirection, the
RRC CONNECTION REQUEST message does not contain the "Pre-redirection
info" IE. (For details, see section 8.1.3.3 "RRC CONNECTION REQUEST
message contents to set" in 3GPP TS 25.331 V9.4.0.) The first service that the UE
processes after accessing the UMTS cell is a CS service.
2. If the UE is identified as a CSFB UE and the UE does not perform a PS service after
finishing the CS service in the UMTS cell, the RNC triggers the RRC connection release
procedure.
3. The RNC includes the information about LTE frequencies in an RRC CONNECTION
RELEASE message. For the method of selecting LTE frequencies contained in the
message, see 5.2.6 Selecting Frequencies to Be Carried in the RRC CONNECTION
RELEASE Message. Upon receiving the message, the UE selects a target cell based on
the information and attempts to camp on this cell. (For details about suitable LTE cell
selection, see section 8.5.2 Actions when entering idle mode from connected mode in
3GPP TS 25.331 V9.4.0. For details about a suitable LTE cell, see section 4 Overall
process structure in 3GPP TS 23.122 V11.4.0.)
details about a suitable LTE cell, see chapter 4 "Overall process structure" in 3GPP TS 23.122
V11.4.0.)
NOTE
When a UE that has performed a CSFB procedure moves to another RNC and the target RNC becomes
the SRNC, the target RNC determines that the UE has performed a CSFB process and this function can
take effect in one of the following circumstances:
1. An "End Of CSFB" IE is carried in the IU RELEASE COMMAND message sent by the MSC when
the CS service is released.
2. If RESERVED_SWITCH_0_BIT10 under the RsvSwitch0(BSC6900,BSC6910) parameter in the
SET UNRNCRSVPARA command is selected on the source RNC, the source RNC carries the
CSFB indication in the relocation required IE and send the IE to the target RNC through the CN (in
this case, the CN must be able to forward the CSFB indication). If
RESERVED_SWITCH_12_BIT21 under the RsvSwitch12(BSC6900,BSC6910) parameter in the
SET UALGORSVPARA command is selected on the target RNC, the target RNC regards that the
UE has performed a CSFB process when the RNC receives the CSFB indication from the source
RNC.
In most cases, if there is a PS service ongoing when the UE finishes its CS service, the RNC
does not deliver the RRC Connection Release message until the CS RAB is released. To
shorten the time taken by the fast return of a CSFB UE to LTE, a mechanism is introduced so
that the RNC delivers the RRC Connection Release message immediately after receiving an
IU RELEASE COMMAND message from the CS domain. This mechanism takes effect when
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITCH under the
OptimizationSwitch6(BSC6900,BSC6910) parameter is selected.
5.2.4.1 Overview
The following figure shows the principle of LTE measurement-based fast return.
The principle of Fast Return to LTE for SRVCC User, as shown in Figure 5-2, is illustrated as
follows:
1. Trigger phase: The RNC decides whether to trigger an LTE measurement-based fast
return. For details, see 5.2.4.2 Triggering.
2. Measurement phase: The RNC decides whether to start an LTE measurement. If an LTE
measurement is needed, it delivers the measurement control message and handles the
measurement result. For details, see 5.2.4.3 Measurement.
3. Execution phase: The RNC decides which procedure to trigger to implement the fast
return, measurement-based redirection or handover. For details, see 5.2.4.4 Execution.
5.2.4.2 Triggering
If a CSFB UE still has a PS service ongoing after it finishes a CS service, the RNC triggers an
LTE measurement-based fast return when the following conditions are met:
l The UE is identified as a CSFB UE on the UMTS side.
l The UMTS-to-LTE Fast Return feature is enabled.
l Measurement-based fast return after a CSFB UE finishes its voice service is enabled.
To ensure that an LTE measurement-based fast return to the LTE network can be triggered for
a CSFB UE that has no PS service ongoing after it finishes a CS service,
PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH under
PerfEnhanceSwitch7(BSC6900,BSC6910) must be set to ON in addition to the preceding
conditions.
A UE is considered as a CSFB UE by the following mechanism only when it meets any of
conditions 1 to 3 described in 5.2.3 Enhanced UMTS-to-LTE Fast Return.
For settings of the switches for UMTS-to-LTE fast return and enhanced UMTS-to-LTE fast
return, see 5.2.2 UMTS-to-LTE Fast Return and 5.2.3 Enhanced UMTS-to-LTE Fast
Return.
For the measurement-based fast return of a CSFB UE after releasing a voice service, there is
an RNC-level switch and a cell-level switch. The RNC-level switch is
HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH under
HoSwitch1(BSC6900,BSC6910). The cell-level switch is
HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH under
FastReturnToLTESwitch(BSC6900,BSC6910). When both the RNC-level and cell-level
switches are configured, the setting of the cell-level switch takes precedence.
5.2.4.3 Measurement
The measurement implemented for LTE measurement-based fast return is the same as that
implemented for the UMTS-to-LTE fast return of an SRVCC UE. For details, see 6.3.3
Measurement.
NOTE
Different from Fast Return to LTE for SRVCC User, LTE measurement-based UMTS-to-LTE Fast
Return allows a UE to perform fast return to LTE through blind redirection if the UE does not support
measurement.
5.2.4.4 Execution
The method of executing LTE measurement-based fast return is the same as the method of
executing the UMTS-to-LTE fast return of an SRVCC UE. For details, see 6.3.4 Execution.
If the RSCP of the serving UMTS cell reaches a specific threshold, the UE is located at an
area with strong LTE signal coverage. Therefore, a CSFB UE in this situation can perform
fast return to LTE through blind redirection after it finishes a CS service. Compared with the
fast return function based on blind redirection, RSCP measurement-based fast return can
improve the success rate of blind redirections. Compared with LTE measurement-based fast
return, this function can reduce the interference caused by measurement in compressed mode.
A UE is considered as a CSFB UE by the following mechanism only when it meets any of
conditions 1 to 3 described in 5.2.3 Enhanced UMTS-to-LTE Fast Return.
This function can be enabled through either the RNC-level or cell-level switch. The RNC-
level switch is HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter. The cell-level switch is
HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH under
FastReturnToLTESwitch(BSC6900,BSC6910). When both the RNC-level and cell-level
switches are configured, the setting of the cell-level switch takes precedence.
The principle for this function is as follows:
1. After a CSFB UE establishes a CS service, the RNC delivers a periodic RSCP
measurement control message to the UE. The measurement period is specified by
U2LNCovRscpPrdTimer(BSC6900,BSC6910). A UE is considered as a CSFB UE only
when it meets any of conditions 1 to 3 described in 5.2.3 Enhanced UMTS-to-LTE
Fast Return.
2. After receiving an RSCP measurement value reported by the UE, the RNC performs as
follows:
After the CSFB UE finishes the CS service, the RNC checks whether the RSCP measurement
value reported by the UE reaches the RSCP threshold for non-coverage-based UMTS-to-LTE
redirection or handover:
l If the measured RSCP is greater than or equal to this threshold, fast return is directly
performed through blind redirection.
l If the measured RSCP is less than this threshold, the RNC checks whether there is still a
PS service ongoing:
– If there is no PS service, the RNC performs an LTE measurement-based fast return
when the switches for both LTE measurement-based fast return and LTE
measurement-based fast return for a UE finishing its single CS service are turned
on; whereas the RNC directly releases the UE's resources when either of the
switches is turned off.
– If there is a PS service, the RNC checks the setting of the LTE measurement-based
fast return function: If this function is enabled, it performs an LTE measurement-
based fast return. If the function is disabled, the RNC does not perform any fast
return.
The RSCP threshold for non-coverage-based UMTS-to-LTE redirection or handover is
specified by either the cell-level parameter U2LNCovRscpThd(BSC6900,BSC6910) or RNC-
level parameter U2LNCovRscpThd(BSC6900,BSC6910). When both the RNC-level and cell-
level switches are configured, the setting of the cell-level switch takes precedence.
When the UE is in the CCH (CELL_FACH, CELL_PCH, or URA_PCH) state, the RNC
obtains set C by collecting all LTE frequencies of the operator that provide services to
the UE from set B if all the following conditions are met.
– PERFENH_FAST_RETURN_CCH_OP_SEL_SWITCH under the
PerfEnhanceSwitch4(BSC6900,BSC6910) parameter in the MML command SET
UCORRMPARA is set to ON.
– HO_IMSI_MM_SWITCH under the HoSwitch2(BSC6900,BSC6910) parameter
in the MML command SET UCORRMALGOSWITCH is set to OFF.
– InterPlmnHoAllowedInterRat(BSC6900,BSC6910) in the MML command SET
UOPERATORSHARINGMODE is set to OFF.
When the UE is in the CCH (CELL_FACH, CELL_PCH, or URA_PCH) state, an inter-
PLMN handover frequency list has been configured for the UE (the inter-PLMN
handover frequency list is configured using the ADD UINTERPLMNHOLIST
command), and all the following conditions are met, then the RNC filters LTE
frequencies in set B according to the inter-PLMN handover frequency list to obtain set
C. If all the following conditions are met but no inter-PLMN handover frequency list has
been configured for the UE using the ADD UINTERPLMNHOLIST command, the
RNC does not perform filtering and set C equals set B.
– PERFENH_FAST_RETURN_CCH_OP_SEL_SWITCH under the
PerfEnhanceSwitch4(BSC6900,BSC6910) parameter in the MML command SET
UCORRMPARA is set to ON.
– HO_IMSI_MM_SWITCH under the HoSwitch2(BSC6900,BSC6910) parameter
in the MML command SET UCORRMALGOSWITCH is set to OFF.
– InterPlmnHoAllowedInterRat(BSC6900,BSC6910) in the MML command SET
UOPERATORSHARINGMODE is set to ON.
4. When the UL Unified Overload Control feature is enabled, the RNC filters out LTE
frequencies carrying heavy traffic. Set D is obtained.
5. Determine whether to filter LTE frequencies based on the SPID-based dedicated
frequency priority:
If the following conditions are met, the RNC filters LTE frequencies according to SPID-
based dedicated frequency priorities by performing step 6. If not, the RNC performs step
7.
– HO_SPID_MM_SWITCH under HoSwitch1(BSC6900,BSC6910) is selected.
– The RNC has obtained the UE's SPID information and SPID-related parameters
have been configured, for example, RatFreqPriorityGroupId(BSC6900,BSC6910).
– The dedicated priority set (corresponding to
RatFreqPriorityGroupId(BSC6900,BSC6910)) for the UMTS/LTE frequencies is
not empty.
NOTE
For configurations of the SPID-based dedicated priority, see Flexible User Steering Feature
Parameter Description.
6. Select LTE frequencies according to SPID-based dedicated frequency priorities.
The RNC first filters out LTE frequencies with SPID-based dedicated priorities lower
than the priority of the serving UMTS cell from set D. Among the remaining
frequencies, the RNC selects a maximum of four LTE FDD frequencies and four LTE
TDD frequencies according to the SPID-based dedicated priorities. Then the RNC sends
the selected frequencies to the UE through an RRC CONNECTION RELEASE message.
l For the frequency of the serving UMTS cell, the SPID-based dedicated priority is used if the
SPID-based dedicated priority is configured, or the absolute priority is used if the SPID-based
dedicated priority is not configured. For a UMTS frequency, the SPID-based dedicated priority
is specified by the DediPriority(BSC6900,BSC6910) parameter and the absolute priority is
specified by the SPriority(BSC6900,BSC6910) parameter.
l For an LTE frequency, the SPID-based dedicated priority is used if the SPID-based dedicated
priority is configured. If the SPID-based dedicated priority is not configured, the priority to be
used depends on the setting of HO_U2L_CONN_PRIO_SWITCH under
HoSwitch1(BSC6900,BSC6910): When this switch is turned on, the connected mode priority
is used. When this switch is turned off, the absolute priority is used. For an LTE frequency, the
SPID-based dedicated priority is specified by the DediPriority(BSC6900,BSC6910)
parameter; the connected mode priority is specified by the
NPriorityConnect(BSC6900,BSC6910) parameter; the absolute priority is specified by the
NPriority(BSC6900,BSC6910) parameter .
l The SPID-based dedicated priority is not used during cross-Iur handover or redirection.
7. Determine whether to filter LTE frequencies according to the IMSI-based dedicated
frequency priorities.
If the following conditions are met, the RNC filters LTE frequencies according to the
IMSI-based dedicated priorities of the frequencies by performing step 8. If not, the RNC
performs step 9:
– HO_IMSI_MM_SWITCH under HoSwitch2(BSC6900,BSC6910) is selected.
– The RNC has obtained the UE's IMSI and the UE's IMSI is included in the IMSI
segment corresponding to ImsiGrpIndex(BSC6900,BSC6910).
– For the IMSI segment that includes the UE's IMSI, related parameters such as
RatFreqPriorityGroupId(BSC6900,BSC6910) have been configured.
– The dedicated priority set (corresponding to
RatFreqPriorityGroupId(BSC6900,BSC6910)) for the UMTS/LTE frequencies is
not empty.
NOTE
For the configuration of parameters related to IMSI-based dedicated frequency priorities, see
IMSI-based Mobility Management for Multiple Operators Feature Parameter Description.
8. Select LTE frequencies according to IMSI-based dedicated frequency priorities.
The RNC obtains set E by collecting the LTE frequencies that meet the following
conditions: The LTE frequencies belong to the frequency priority group (specified by the
RatFreqPriorityGroupId(BSC6900,BSC6910) parameter) corresponding to the UE's
IMSI. The U2LConnTargetFreqInd(BSC6900,BSC6910) parameter is set to TRUE for
the LTE frequencies. Priorities of the LTE frequencies are higher than the serving UMTS
cell's priority.
NOTE
For the frequency of the serving UMTS cell, the SPID-based dedicated priority is used if the
IMSI-based dedicated priority is configured, or the absolute priority is used if the SPID-based
dedicated priority is not configured. For a UMTS frequency, the IMSI-based dedicated priority is
specified by the DediPriority(BSC6900,BSC6910) parameter and the absolute priority is specified
by the SPriority(BSC6900,BSC6910) parameter.
Then the RNC obtains the intersection set of set D and set E. From the intersection set,
the RNC selects a maximum of four LTE FDD frequencies and then a maximum of four
LTE TDD frequencies according to IMSI-based dedicated priorities of the LTE
frequencies and carries the frequencies in the RRC CONNECTION RELEASE message.
The selected frequencies are to be measured. The IMSI-based dedicated priority of an
LTE frequency is specified by the DediPriority(BSC6900,BSC6910) parameter.
9. The RNC filters the frequencies based on the setting of
HO_U2L_CONN_PRIO_SWITCH under HoSwitch1(BSC6900,BSC6910):
If this switch is turned off, the RNC first filters out LTE frequencies whose absolute
priorities are lower than the absolute priority of the serving cell and then selects a
maximum of four LTE FDD frequencies and four LTE TDD frequencies according to the
absolute priorities of the LTE frequencies. The selected frequencies are to be measured.
The absolute priority of a frequency is specified by the NPriority(BSC6900,BSC6910)
parameter.
If this switch is turned on, the RNC first filters out LTE frequencies whose connected
mode priorities are lower than the absolute priority of the serving cell and then selects a
maximum of four LTE FDD frequencies and four LTE TDD frequencies according to the
connected mode frequencies of the LTE frequencies. The selected frequencies are to be
measured. The connected mode priority of a frequency is specified by the
NPriorityConnect(BSC6900,BSC6910) parameter.
NOTE
The UMTS-to-LTE connection mode priority is not used during cross-Iur handover or redirection.
If some LTE cells are configured as blacklisted cells using the ADD
UCELLNFREQPRIOINFO command and
PERFENH_U2L_REDIR_WITH_BLACK_CELL_SWITCH under the
PerfEnhanceSwitch3(BSC6900,BSC6910) parameter in the SET UCORRMPARA
command is set to ON, the RRC CONNECTION RELEASE message contains not only an
LTE frequency but also those blacklisted cells working in the LTE frequency so that UEs
cannot be handed over to the blacklisted cells based on fast return. If no LTE cells are
configured as blacklisted cells or
PERFENH_U2L_REDIR_WITH_BLACK_CELL_SWITCH is set to OFF, the RRC
CONNECTION RELEASE message does not contain blacklisted cells working in the LTE
frequency.
During cross-Iur handover or redirection:
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH under the
HoSwitch(BSC6900,BSC6910) parameter in the SRNC's MML command SET
UCORRMALGOSWITCH is set to ON. HO_IUR_U2L_FAST_RETURN_SWITCH
under the HoSwitch1(BSC6900,BSC6910) parameter in the MML command SET
UCORRMALGOSWITCH is set to 1. A DRNC cell is configured with neighboring LTE
cells and information about frequencies of neighboring LTE cells according to the following
rules:
l Frequencies of neighboring LTE cells are specified by the
LTEArfcn(BSC6900,BSC6910) parameter in the MML command ADD ULTECELL.
l Neighboring LTE cells are configured using the MML command ADD ULTENCELL.
Among frequencies of all neighboring LTE cells for a DRNC cell, a maximum of four LTE
FDD frequencies and four LTE TDD frequencies are selected and delivered to the UE.
1. CSFB UE identification
Procedures of CSFB supplementary services and voice services are the same during the
LTE-to-UMTS fallback, whereas CS RABs are not set up for supplementary services
after UEs access the UMTS network. Identification procedure of supplementary services
is the same as Method 1 in section 5.2.2 UMTS-to-LTE Fast Return and Method 1, 3,
and 4 in section 5.2.3 Enhanced UMTS-to-LTE Fast Return for voice services.
2. Supplementary service identification
Fast return for CSFB services only applies to UEs that start services after falling back to
the UMTS network. After the RNC identifies the CSFB UEs, if
RESERVED_SWITCH_12_BIT26 under
UALGORSVPARA.RsvSwitch12(BSC6900,BSC6910) is turned on, the RNC identifies
supplementary CS services established through the NAS message.
Fast return for CSFB services requires certain UE and CN versions to perform CSFB UE
identification. After the switch for supplementary service identification is turned on, if a
UL Release-8 UE is redirected to the UMTS cell, the RRC CONNECTION REQUEST
message does not carry Pre-redirection info, and the RNC establishes supplementary CS
services within 10s after receiving RRC Connection Setup Complete, the RNC identifies
the UE as a supplementary CSFB service UE.
NOTE
l The execution duration for supplementary services lasts only about 3s. Therefore, UEs will not
quickly leave the LTE coverage after a CSFB and UMTS-to-LTE fast return can only be performed
based on blind redirection. As a result, the impact of measurements in compressed mode on network
performance can be avoided. However, UEs may be disconnected from the network due to blind
redirection if they have left the LTE coverage.
l For a UE that performs PS services in the LTE network and initiates supplementary CS services
within 10s after a coverage-based redirection to the UMTS network, if the supplementary service
identification switch is turned on, supplementary service identification is performed according to
step 2. The UE may be mistakenly identified as performing a supplementary service after CSFB.
However, this circumstance rarely occurs. The UE performs the fast return after supplementary
services are completed. Therefore, it is recommended that the supplementary service identification
switch not be turned on in overlapped UMTS and LTE coverage areas.
5.3.1 Overview
For CSFB for an emergency call:
This document only describes resource reservation and service admission for PS services. For details
about implementation of the feature WRFD-021104 Emergency Call, see Load Control Feature
Parameter Description.
5.3.2 Policy
If a UE is to fall back to the UMTS network by using the LTE-to-UMTS PS handover, the
eNodeB sends the MME a Handover Required message. This message carries a transparent
container, Source RNC to Target RNC Transparent Container, which contains an IE referred
to as CSFB Information. If this IE value is CSFB, it indicates a PS handover caused by CSFB
for a common CS service. If this IE value is CSFB High Priority, it indicates a PS handover
caused by CSFB for an emergency call.
The transparent container is forwarded by the CN to the target RNC. When the target RNC
receives CSFB Information whose value is CSFB High Priority, the RNC determines that an
incoming LTE-to-UMTS PS handover is caused by CSFB for an emergency call. In this case,
the RNC decreases the service rate or performs resource preemption for the PS service. The
specific policy is as follows:
l For a BE PS service, such as a background or interactive service, the RNC attempts to
admit it based on the value of the NRTInitRateforL2U(BSC6900,BSC6910) parameter
in the MML command SET UFRC. If the admission attempt fails, the RNC preempts
the resources of low-priority user.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to OFF, the
data rates and channel types of the PS service are retained during service admission.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to DCH8K,
the uplink and downlink of the PS services are carried on the DCH, with the initial
rate of 8 kbit/s.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to DCH0K,
the uplink and downlink of the PS services are carried on the DCH with an initial
rate of 0 kbit/s.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to
DCH8KHSDPA, the uplink of the PS service is carried on the DCH with an initial
rate of 8 kbit/s. If the downlink of the PS service is carried on the HSDSCH, the
initial rate is not limited; if it is carried on the DCH, the initial rate is 8 kbit/s.
l For a non-BE PS service, such as a streaming service, the RNC attempts to admit it
based on the GBR. If the admission attempt fails, the RNC preempts the resources of
low-priority user.
l After the PS service admission succeeds, the PS service rate is gradually increased if
there are available resources in the UMTS network.
For details about service admission, see Call Admission Control Feature Parameter
Description. For details about resource preemption, see Load Control Feature Parameter
Description.
For a CSFB procedure during which a UE falls back to the UMTS network through an LTE-
to-UMTS PS handover, the CSFB delay can be reduced by increasing the bearing data rate on
the signaling radio bearer (SRB). The bearing data rate is set by
CSFBSRBRate(BSC6900,BSC6910) of the SET UFRC command.
5.4.1 Overview
Huawei product provides a CSFB guarantee for LTE emergency calls and common calls. This
reduces admission failures and increases successful handovers for CS services.
To enable CSFB guarantee for LTE common calls, users need to set
PERFENH_L2U_CSFB_COMMCALL_SWITCH under
PerfEnhanceSwitch(BSC6900,BSC6910) to ON by running the SET UCORRMPARA
command.
5.4.2 Policy
The RNC determines that an incoming LTE-to-UMTS PS handover is caused by CSFB for a
common call when either of the following conditions is met: The cause value is CS Fallback
triggered (268) in the Relocation Request message received at the RNC. The value of the IE
"CSFB Information" is CSFB in the IE "Source RNC To Target RNC Transparent Container"
of the Relocation Request message. In this case, the RNC decreases the service rate or
performs resource preemption for the PS service. The specific policy is as follows:
l For a non-realtime PS service, the RNC attempts to admit it based on the value of the
NRTInitRateforL2U(BSC6900,BSC6910) parameter in the MML command SET
UFRC. If the admission attempt fails, the RNC preempts the resources of low-priority
users.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to OFF, the
data rates and channel types of the PS service are retained during service admission.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to DCH8K,
the uplink and downlink of the PS services are carried on the DCH, with the initial
rate of 8 kbit/s.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to DCH0K,
the uplink and downlink of the PS service are carried on the DCH, with the initial
rate of 0 kbit/s.
– When the NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to
DCH8KHSDPA, the uplink of the PS service is carried on the DCH with an initial
rate of 8 kbit/s. If the downlink of the PS service is carried on the HSDSCH, the
initial rate is not limited; if it is carried on the DCH, the initial rate is 8 kbit/s.
l For a real-time PS service, the RNC attempts to admit it based on the GBR. If the
admission attempt fails, the RNC preempts the resources of a low-priority service for the
real-time PS service.
l After the PS service admission succeeds, the PS service rate is gradually increased if
there are available resources in the UMTS network.
If PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SWITCH under
PerfEnhanceSwitch(BSC6900,BSC6910) is set to ON, the RNC does not consider the LDR
status of the cell when performing resource admission during the LTE-to-UMTS PS handover
for CSFB. Therefore, the handover preparation success rate increases.
For details about service admission, see Call Admission Control Feature Parameter
Description. For details about resource preemption, see Load Control Feature Parameter
Description.
When some UEs initiate a local area update (LAU) after the fallback to a UMTS network, the
value of the "Establishment cause" IE in the RRC CONNECTION REQUEST message is
Registration. When RESERVED_SWITCH_16_BIT15 of the
RsvSwitch16(BSC6900,BSC6910) parameter in the SET UALGORSVPARA command is
set to ON, UEs are considered as CSFB UEs if they meet Condition a, b, and d in Method 3
and the value of the "Establishment cause" IE in the RRC CONNECTION REQUEST
message is Registration. It is not recommended that this switch be not turned on because the
UEs that are normally redirected to a UMTS network may be mistaken for CSFB UEs and the
PS service performance may be affected.
Method 4: A UE is a PS redirection-based CSFB UE when it meets the following conditions:
l The UE meets condition d of method 3.
l The UE also meets condition 3 used by the UMTS-to-LTE Fast Return feature to identify
a CSFB UE (for details, see 5.2.3 Enhanced UMTS-to-LTE Fast Return), or meets
conditions a and b in method 3.
l The first established service is a PS service.
The following delay reduction measures apply to CSFB UEs identified by method 4:
When PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWITCH under the
PerfEnhanceSwitch4(BSC6900,BSC6910) parameter in the SET UCORRMPARA
command and DR_RAB_COMB_DRD_SWITCH under the DrSwitch(BSC6900,BSC6910)
parameter are set to ON and if a PS service is set up before the CS service during the LTE-to-
UMTS CSFB through PS service redirection, the RNC identifies a service as a CS+PS
combined service in advance and treats the service accordingly during the intra-RAT DRD.
Without the preceding mechanism, two DRD processes are performed separately for the CS
and PS services involved in the CSFB process. With the preceding mechanism, only one DRD
process is required for the CS+PS combined service, which reduces the CSFB delay and
improves user experience. This switch is turned off by default.
NOTE
The following delay reduction measures apply to CSFB UEs identified by method 1 or 3:
When CSFB_UE_DELAY_RAU_SWITCH under the
ImprovementSwitch(BSC6900,BSC6910) parameter in the MML command SET
URRCTRLSWITCH is selected, the RNC does not transfer a routing area update (RAU)
request until the CS service has been set up, the routing area update request transfer timer has
expired, or the RNC has received the direct transfer message (Release message) during a
CSFB process based on an LTE-to-UMTS PS handover or redirection, which reduces the
CSFB delay and improves user experience. This switch is set to off by default. The routing
area update request transfer timer is specified by the
NOTE
The following cell-level delay reduction measures apply to all CSFB UEs:
When the DeferMcReadInd(BSC6900,BSC6910) parameter in the ADD UCELLMEAS or
MOD UCELLMEAS command is set to TRUE, the RNC carries the Deferred measurement
control reading support IE in the SIB3. During the LTE-to-UMTS CSFB through redirections,
the UE does not read SIB 11 and SIB 11bis until it has accessed the network, which
accelerates the access process and reduces the CSFB delay. This switch is turned off by
default.
When PERFENH_SIB3_SCHEDULE_OPT_SWITCHH under
PerfEnhanceSwitch2(BSC6900,BSC6910) in the MML command SET UNBMPARA is set
to ON, a new scheduling algorithm applies to system information blocks (SIBs) of UMTS,
which shortens the scheduling period of SIB3. When
PERFENH_SIB3_MAX_PEROID_LIMIT_SWITCH under
PerfEnhanceSwitch2(BSC6900,BSC6910) is set to OFF, the maximum scheduling period of
SIB3 is 40,960 ms. When PERFENH_SIB3_MAX_PEROID_LIMIT_SWITCH is set to
ON, the maximum period of SIB3 is 160 ms. These two methods optimize the scheduling of
SIB3, which quickens UEs' access process and reduce the CSFB delay during the LTE-to-
UMTS CSFB through redirections.
When PERFENH_DCH_TRCH_OPT_SWITCH under
PerfEnhanceSwitch3(BSC6900,BSC6910) in the MML command SET UCORRMPARA is
set to ON, the RNC optimizes contents of the RB setup message during the LTE-to-UMTS
CSFB through redirections or PS handovers, which quickens message transmission and
reduces the CSFB delay. This switch is turned off by default.
When SrbRateCovSelSwitch(BSC6900,BSC6910) in the MML command SET
USRBRATECOVSEL is set to ON, the RNC obtains the signal strength by comparing the
EcN0 value reported in the RRC CONNECTION REQUEST message sent by the UE with
the values of RrcSetSrbRateGoodEcNoThd(BSC6900,BSC6910) and
RrcSetSrbRateBadEcNoThd(BSC6900,BSC6910) if the cause value of the RRC connection
setup during the LTE-to-UMTS redirection-based CSFB process is in the cause value set
specified by RrcSetupSrbRateSelSet(BSC6900,BSC6910). According to the cell's signal
strength and load status, the RNC adjusts the SRB rate automatically. If the UMTS cell has
strong signals (the EcN0 value is greater than or equal to the value of
RrcSetSrbRateGoodEcNoThd(BSC6900,BSC6910)), the RNC changes the SRB rate to 27.2
kbit/s to reduce the CSFB access delay.
Step 1 through step 4: A UE in the LTE network initiates or receives a voice service request.
Therefore, the eNodeB initiates an LTE-to-UMTS handover of combined services through
SRVCC. Using a mechanism, the MME and MSC ensure the successful LTE-to-UMTS
handover.
Step 6: The CN sends a handover command to the eNodeB, and the eNodeB delivers the
handover command to the UE.
Step 8 through step 9: The RNC and UE implement the security mode and processes such as
UTRAN mobility information.
Step 10 through step 13: The UE and MSC exchanges NAS messages with each other to set
up a CS service.
Step 14: The SRB rate is reconfigured to 3.4 kbit/s after the CS service is set up to save
UMTS resources.
The Ultra-Flash CSFB process in Figure 5-1 and Figure 5-2 do not contain the following
procedures:
l Authentication
This procedure is not required because the UE has been authenticated on the LTE side
before it is handed over from an LTE cell to a UMTS cell.
l Encryption
This procedure is not required after a CSFB because the UE has implemented encryption
according to the handover command during the SRVCC handover.
l IMEI query
This procedure is not required after a handover is complete because the MME has sent
the IMEI to the MSC during the SRVCC handover preparation.
l CS resource establishment
This procedure is not required after a handover is complete because CS resources have
been prepared on the UMTS side during the SRVCC procedure. This section only
describes how Ultra-Flash CSFB is implemented on the RAN side.
NOTE
For implementation of Ultra-Flash CSFB on the LTE side, see CS Fallback Feature Parameter
Description for LTE.
UEs who are performing Ultra-Flash CSFB with a signaling rate of 3.4 kbit/s or 6.8 kbit/s will
perform measurement after being handed over to the UMTS network. If the CN initiates an
RB reconfiguration for the UE in the CS domain during the measurement, the UE's activation
time may expires before the UE receives a reconfiguration message. The activation time of
RB reconfiguration is specified by bits 0 to 7 of the RsvU32Para33(BSC6900,BSC6910)
parameter in the SET UALGORSVPARA command.
6 SRVCC
6.1 Overview
The LTE network supports voice over IP (VoIP) services after the IP multimedia subsystem
(IMS) is deployed. When a UMTS/LTE multi-mode UE in the middle of a VoIP service on the
LTE network moves to the UMTS coverage area, the single radio voice call continuity
(SRVCC) feature works to hand over the VoIP service to the CS domain of the UMTS
network. This feature ensures voice service continuity.
When performing the VoIP service on the LTE network, the UE maintains a default PS
connection even if it is not performing PS services. This PS connection also needs to be
handed over to the UMTS network during the SRVCC from LTE to UMTS. Currently, the UE
performing the VoIP service on the LTE network supports the following types of LTE-to-
UMTS handovers:
l CS only SRVCC handover, also known as SRVCC from LTE to UMTS without PS
handover In a CS only SRVCC handover, the mobility management entity (MME) on the
LTE network suspends the PS service, hands over the VoIP service to the CS domain of
the UMTS network, and then setup the radio bearer for the PS service. On the UMTS
RAN side, the procedure for the CS only SRVCC handover is identical to that for an
incoming inter-RAT CS handover. A CS only SRVCC handover is allowed only when
SYSHO_CSIN_PERMIT_SWITCH under the RsvdPara1(BSC6900,BSC6910)
parameter in the RNC MML command SET URRCTRLSWITCH is selected.
l CS+PS SRVCC handover, also known as SRVCC from LTE to UMTS with PS handover
In a CS+PS SRVCC handover (WRFD-150215 SRVCC from LTE to UMTS with PS
Handover), the VoIP service is handed over to the CS domain of the UMTS network, and
the PS service is handed over to the PS domain of the UMTS network. On the UMTS
RAN side, the procedure for the CS+PS SRVCC handover is identical to that for an
incoming inter-RAT CS+PS handover.
This chapter mainly describes CS+PS SRVCC handover, which is new in RAN15.0. For
details about CS only SRVCC handovers, see LTE document SRVCC Feature Parameter
Description.
Since LTE networks can provide better user experience, UEs would better return to LTE
networks immediately when they move to LTE coverage areas after finishing voice services
on UMTS networks. To enable fast return of UEs to LTE networks after being handed over to
UMTS networks through SRVCC and finishing voice services on UMTS networks, RAN17.1
introduces the Fast Return to LTE for SRVCC User feature, which supports fast return based
on measurement.
SRVCC UEs who are performing CS only or PS+CS services will perform measurement after
being handed over to the UMTS network. If the CN initiates an RB reconfiguration for the
UE in the CS domain during the measurement, the UE's activation time may expires before
the UE receives a reconfiguration message. The activation time of RB reconfiguration is
specified by bits 0 to 7 of the RsvU32Para33(BSC6900,BSC6910) parameter in the SET
UALGORSVPARA command.
SRVCC UEs who are performing CS only or PS+CS services use default configuration after
being handed over to the UMTS network. The pO3-ForPilotBits IE is set to 0 dB by default
on the UE. If the RNC configures the pilot power offset to a value that is not 0 dB on the
NodeB, demodulation capability of UEs may be affected and call drops may occur. During an
inter-RAT handover, the RNC can configure the pilot power offset on the NodeB by
specifying RESERVED_SWITCH_14_BIT24 under RsvSwitch14(BSC6900,BSC6910) in
the SET UALGORSVPARA command. If it is set to ON, the RNC configures the pO3-
ForPilotBits IE to 0 dB, which reduces the call drop rate.
Figure 6-1 Procedure for the SRVCC from LTE to UMTS with PS Handover feature
If in the incoming handover process... Then the RNC starts a timer specified
by...
After starting the timer, if the SRVCC from LTE to UMTS with PS Handover feature is
enabled, the RNC performs the following operations:
l If the RNC receives a Handover Request message from both the CS and PS domains
before the timer expires, the RNC processes an incoming inter-RAT CS+PS handover.
After receiving the two Handover Request messages, the RNC determines whether to
admit the UE. To ensure that the CS service is preferentially admitted, the RNC may
reduce the original access rate of the PS service.
If the PS service is a real-time (RT) service, the RNC does not reduce the original access
rate of the RT service.
If the PS service is a non-real-time (NRT) service: When
NRTInitRateforL2U(BSC6900,BSC6910) is set to OFF, the RNC does not reduce the
original access rate of the NRT service. When NRTInitRateforL2U(BSC6900,BSC6910)
is set to DCH0K, DCH8K, or DCH8KHSDPA, the RNC adjusts the access rate of the
PS service to the specified value. The RNC admits the UE only when the resources are
sufficient.
If the PS admission fails during a handover of combined services to UMTS. When
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWITCH under the
PerfEnhanceSwitch7(BSC6900,BSC6910) parameter is set to ON and the
NRTInitRateforL2U(BSC6900,BSC6910) parameter is set to OFF, the PS service is
preferentially carried on the HSPA+ channels during a handover of combined services to
UMTS so that the RNC reattempts to admit the PS service of combined services but with
a lower rate if admission of the PS service fails. The rates will be tried one by one in the
following sequence: HSPA+ -> HSPA -> DCH -> DCH 0K.
The resources include power resources, code resources, channel element (CE) resources,
transport resources, and so on. For details, see Call Admission Control Feature
Parameter Description.
During an LTE-to-UMTS handover of combined services, the RNC may deliver the
security mode command of both the CS and PS domains to ensure integrity protection of
both domains. This function is controlled by CSPS_SYS_HO_IN_SMC_SWITCH
under OptimizationSwitch8(BSC6900,BSC6910). If
SYS_HO_RELOC_CMP_OPT_SWITCH under
OptimizationSwitch8(BSC6900,BSC6910) is also set to ON, the RNC will send the
Relocation Complete message after receiving the handover to UTRAN Complete
message and finishing integrity protection. This mechanism further increases the
handover success rate.
After a UMTS-to-LTE handover for combined services, the CS encryption key specified
by the encryption key use protocol is required to ensure that services are properly
An AMR service for which an SRVCC process is triggered is regarded as an emergency call if the
value of L2USRVCCEmerCallARP(BSC6900,BSC6910) is not 0 and the ARP value in the
Relocation Request for the AMR service is equal to the value of
L2USRVCCEmerCallARP(BSC6900,BSC6910).
l When L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWITCH under
PROCESSSWITCH5(BSC6900,BSC6910) is set to ON, the switch for CS only
handover during SRVCC of CS+PS combined services is turned on and the RNC admits
the CS only service if it only receives a RELOCATION REQUEST message from the
CS domain within the duration of a specific timer. When the switch is not turned on, the
RNC rejects the admission request if it receives a RELOCATION REQUEST message
only from the CS domain within the duration of the timer. No matter whether the switch
is turned on, the RNC rejects the relocation request if it receives a RELOCATION
REQUEST message only from the PS domain within the duration of the timer.
NOTE
The timers for the RNC to wait for the RELOCATION REQUEST messages from the PS and CS
domains are specified by the IRatHoWaitPSRelocReqTmr(BSC6900,BSC6910) and
IRatHoWaitCSRelocReqTmr(BSC6900,BSC6910) parameters, respectively. The values of the
timers must be less than values of the timers for the CN to wait for the RELOCATION REQUEST
messages from the PS and CS domains.
Figure 6-2 Signaling process for SRVCC from LTE to UMTS with PS Handover
6.3.1 Overview
If a UE initiates a VoIP service and moves out of the LTE coverage area, it can be handed
over to the UMTS network through SRVCC to continue with the voice service. With the
WRFD-171223 Fast Return to LTE for SRVCC User feature, the UE can return to the LTE
network immediately when it finishes the voice service.
To avoid that the UE implements a fast return when it is in an LTE coverage hole or in a weak
LTE coverage area, which may lead to a fast return failure, LTE measurement is required after
the UE finishes the voice service. According to the LTE measurement, the RNC decides
whether to allow fast return of the UE to the LTE network.
When PERFENH_FAST_RETURN_OPT_SWITCH under
PerfEnhanceSwitch7(BSC6900,BSC6910)is selected, a fast return to the LTE network can be
triggered by the first AMR release of a UE that has been handed over to the UMTS network
through SRVCC. If this switch is turned off, a fast return can be triggered by any AMR
release of the SRVCC UE as long as an RRC connection is live for the UE.
The following figure shows the principle of the Fast Return to LTE for SRVCC User feature.
Figure 6-3 Principle of the Fast Return to LTE for SRVCC User feature
The principle of Fast Return to LTE for SRVCC User, as shown in Figure 6-3, is illustrated as
follows:
l Triggering phase: The RNC decides whether to trigger a fast return of the SRVCC UE to
the LTE network. For details, see 6.3.2 Triggering Conditions.
l Measurement phase: The RNC decides whether to start an LTE measurement. If an LTE
measurement is needed, it delivers the measurement control message and handles the
measurement result. For details, see 6.3.3 Measurement.
l Decision and Execution phase: The RNC decides which procedure to trigger to
implement the fast return, measurement-based redirection or handover. For details, see
6.3.4 Execution.
However, for an SRVCC UE that has no PS service ongoing after it finishes a voice service,
PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH under
PerfEnhanceSwitch7(BSC6900,BSC6910) must be set to ON in addition to the preceding
conditions so that a fast return to the LTE network will be triggered.
The switches for Fast Return to LTE for SRVCC User include the RNC-level and cell-level
switches. The RNC-level switch is HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH
under HoSwitch1(BSC6900,BSC6910). The cell-level switch is
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH under
FastReturnToLTESwitch(BSC6900,BSC6910). When both the RNC-level and cell-level
switches are configured, the setting of the cell-level switch takes precedence.
UEs with CS only services and performing LTE-to-UMTS handovers through SRVCC are
distinguished from UEs with combined services and performing LTE-to-UMTS handovers
through SRVCC based on the conditions that they must meet.
l A UE is identified as the one with a CS only service and performing an LTE-to-UMTS
handover through SRVCC when the UE meets the following conditions:
– This UE is from an LTE cell: The UE sends a Relocation Request message when it
is handed over from the LTE network to the UMTS network and the value of the
"UE History Information" IE in the message is "Last Visited E-UTRAN Cell
Information."
– The UE is performing a CS only service: The value of the "CN Domain Indicator"
IE in the Relocation Request message is CS domain and the value of the
"numberOfIuInstances" IE is 1.
l A UE is identified as the one with combined services and performing an LTE-to-UMTS
handover through SRVCC when the UE meets the following conditions:
– The UE is performing an LTE-to-UMTS handover: In the Relocation Request
message received by the RNC, the "to target RRC Container" in the "Source RNC
To Target RNC Transparent Container" contains the "interRATHandoverInfo" IE.
– The handover request is for two domains: In the Relocation Request message
received by the RNC, the value of the "numberOfIuInstances" IE in the "Source
RNC To Target RNC Transparent Container" is 2.
– The UE is not an Ultra-Flash CSFB UE: The value of the cause IE in the Relocation
Request message is not "CS Fallback triggered(268)" and the message does not
carry the "CSFB Information" IE.
6.3.3 Measurement
Overview
If the UE supports LTE measurement in connected mode, LTE measurement is triggered in
this phase. If the UE does not support LTE measurement in connected mode, the process is
terminated.
The measurement control message sent by the RNC contains the following LTE-specific
information:
l Reporting mode of measurement reports
Similar to service-based UMTS-to-LTE PS redirection or handover, the measurement
report is sent using event 3C.
l Information about the neighboring cell or frequency to be measured. For details, see
Selecting the Frequencies Carried in the Measurement Control Message.
l Measured item
Same as service-based UMTS-to-LTE PS redirection or handover. For details, see 4.3.3.4
Measurements on LTE Signal Quality.
l Measurement event-related parameters
– If no PS service is ongoing after the voice service is complete:
The RSRP- or RSRQ-based decision threshold is specified by
SigTargetRatThdRSRP(BSC6900,BSC6910) or
SigTargetRatThdRSRQ(BSC6900,BSC6910). Other parameters related to
measurement events are the same as those used for service-based UMTS-to-LTE PS
If no PS service is ongoing after the voice service is complete, the LTE measurement duration
is specified by U2LTESigMeasTime(BSC6900,BSC6910). If there is a PS service ongoing
after the voice service is complete, the LTE measurement duration is specified by
U2LTEMeasTime(BSC6900,BSC6910).
The method of processing the measurement result is the same as that used for service-based
UMTS-to-LTE PS redirection or handover. For details, see 4.3.3.4 Measurements on LTE
Signal Quality.
in set B according to whether the inter-PLMN handover frequency list of the UE has
been configured:
– If an inter-PLMN handover frequency list has been configured for the UE (the inter-
PLMN handover frequency list is configured using the ADD
UINTERPLMNHOLIST command) and the switch for non-neighboring-cell
based redirection based on frequencies has been turned on, the RNC filters
frequencies based on SupCnOpGrpIndex(BSC6900,BSC6910) and
CnOpGrpIndex(BSC6900,BSC6910). If the switch has been turned off, the RNC
filters frequencies based on CnOpGrpIndex(BSC6900,BSC6910). Set C is
obtained.
– When an inter-PLMN handover frequency list has not been configured for the UE
(the inter-PLMN handover frequency list is configured using ADD
UINTERPLMNHOLIST), the RNC does not perform filtering and set C equals set
B.
4. When the UL Unified Overload Control feature is enabled, the RNC filters out LTE
frequencies carrying heavy traffic. Set D is obtained.
5. Determine whether to filter LTE frequencies according to their SPID-based dedicated
priorities.
If the following conditions are met, the RNC filters LTE frequencies according to SPID-
based dedicated frequency priorities by performing step 6. If not, the RNC performs step
7.
– HO_SPID_MM_SWITCH under HoSwitch1(BSC6900,BSC6910) is selected.
– The RNC has obtained the UE's SPID and parameters related to the UE's SPID have
been configured, for example, RatFreqPriorityGroupId(BSC6900,BSC6910).
– The dedicated priority set (corresponding to
RatFreqPriorityGroupId(BSC6900,BSC6910)) for the UMTS/LTE frequencies is
not empty.
NOTE
For configurations of the SPID-based dedicated priority, see Flexible User Steering Feature
Parameter Description.
6. Select LTE frequencies according to SPID-based dedicated frequency priorities.
The RNC first checks set D and filters out the LTE frequencies whose SPID-based
dedicated priorities are lower than the absolute priority of the serving cell's frequency
and then selects at most four LTE FDD frequencies and four LTE TDD frequencies
based on the SPID-based dedicated priorities of the LTE frequencies. The selected
frequencies are to be measured.
The SPID-based dedicated priority of an LTE frequency is specified by the
DediPriority(BSC6900,BSC6910) parameter.
NOTE
l For the frequency of the serving UMTS cell, the SPID-based dedicated priority is used if it is
configured by using the DediPriority(BSC6900,BSC6910) parameter. If the SPID-based
dedicated priority is not configured, the absolute priority is used by specifying the
SPriority(BSC6900,BSC6910) parameter. If the SPID-based dedicated priority is not
configured, the absolute priority is used by specifying the SPriority(BSC6900,BSC6910)
parameter.
l For LTE frequencies, the SPID-based dedicated priority is used if it is configured by using the
DediPriority(BSC6900,BSC6910) command. Otherwise, when
HO_U2L_CONN_PRIO_SWITCH under the HoSwitch1(BSC6900,BSC6910) parameter is
turned on, the connected mode priority is used by specifying the
NPriority(BSC6900,BSC6910) parameter; when this switch is turned off, the absolute priority
is used by specifying the NPriority(BSC6900,BSC6910) parameter.
l During cross-Iur handovers or redirections, the SPID-based dedicated priorities for the
frequencies of the neighboring LTE cells are forwarded by the DRNC to the SRNC. The
SRNC considers that these SPID-based dedicated priorities are equal to each other (all
neighboring LTE cells have the lowest SPID-based dedicated priority). Therefore, it does not
use the SPID-based dedicated priority to filter or rank the neighboring LTE cells.
7. Determine whether to filter LTE frequencies according to the IMSI-based dedicated
frequency priorities.
If the following conditions are met, the RNC filters LTE frequencies according to the
IMSI-based dedicated frequency priorities by performing step 8. If not, the RNC
performs step 9:
– HO_IMSI_MM_SWITCH under HoSwitch2(BSC6900,BSC6910) is selected.
– The RNC has obtained the UE's IMSI and the UE's IMSI is included in the IMSI
segment corresponding to ImsiGrpIndex(BSC6900,BSC6910).
– For the IMSI segment that includes the UE's IMSI, related parameters such as
RatFreqPriorityGroupId(BSC6900,BSC6910) have been configured.
– The dedicated priority set (corresponding to
RatFreqPriorityGroupId(BSC6900,BSC6910)) for the UMTS/LTE frequencies is
not empty.
NOTE
For the configuration of parameters related to IMSI-based dedicated frequency priorities, see
IMSI-based Mobility Management for Multiple Operators Feature Parameter Description.
8. Select LTE frequencies according to IMSI-based dedicated frequency priorities.
– The LTE frequencies belong to the frequency priority group (specified by the
RatFreqPriorityGroupId(BSC6900,BSC6910) parameter) corresponding to the
UE's IMSI.
– The U2LConnTargetFreqInd(BSC6900,BSC6910) parameter is set to TRUE for
the LTE frequencies.
– Priorities of the LTE frequencies are higher than the serving UMTS cell's priority.
NOTE
For the frequency of the serving UMTS cell, the IMSI-based dedicated priority is used if the
IMSI-based dedicated priority is configured, or the absolute priority is used if the IMSI-
based dedicated priority is not configured. The IMSI-based dedicated priority is configured
using the DediPriority(BSC6900,BSC6910) parameter and the absolute priority is
configured using the SPriority(BSC6900,BSC6910) parameter for a UMTS frequency.
Then the RNC obtains the intersection set of set D and set E. From the intersection set,
the RNC selects a maximum of four LTE FDD frequencies and then a maximum of four
LTE TDD frequencies according to IMSI-based dedicated priorities of the LTE
frequencies. The selected frequencies are to be measured.
For cross-Iur measurement, the UMTS-to-LTE connected-mode priority does not take effect and
the SRNC processes the UMTS-to-LTE connected-mode priorities of frequencies corresponding to
neighboring LTE cells under the DRNC as the lowest priorities.
6.3.4 Execution
After receiving a 3C measurement report, the RNC determines whether to perform a
redirection or handover according to the following rules:
l If there is no PS service after the voice service is complete or the non-neighboring-cell
frequency-based redirection switch
(HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter) is turned on, the RNC performs a
redirection.
If the measurement report contains multiple cells and the UMTS-to-LTE connected mode
priority switch (HO_U2L_CONN_PRIO_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter) is turned on, frequencies are sequenced in a
descending order of priority. If two frequencies have the same priority, they are
sequenced in a descending order of signal quality. If the UMTS-to-LTE connected mode
priority switch is turned off, frequencies are sequenced in a descending order of signal
quality. When the UL Unified Overload Control feature is enabled, the RNC filters out
LTE frequencies carrying heavy traffic. Finally, a maximum of four FDD LTE
frequencies and four TDD LTE frequencies ranking at the top of the list are selected.
l If the switch for triggering non-neighboring-cell frequency-based redirection when there
is a PS service ongoing after completion of a voice service is turned off, the RNC checks
whether HO_HANDOVER_FAST_RETURN_TO_LTE_SWITCH under
HoSwitch1(BSC6900,BSC6910) is selected:
– If this switch is turned on and the UE supports UMTS-to-LTE handover, the RNC
performs a handover.
If the measurement report contains multiple cells and the UMTS-to-LTE connected
mode priority switch (HO_U2L_CONN_PRIO_SWITCH under the
HoSwitch1(BSC6910,BSC6900) parameter) is turned on, frequencies are
sequenced in a descending order of priority. If two frequencies have the same
priority, they are sequenced in a descending order of signal quality. When the UL
Unified Overload Control feature is enabled, the RNC filters out cells carrying
heavy traffic. If the UMTS-to-LTE connected mode priority switch is turned off,
frequencies are sequenced in a descending order of signal quality. The cell
corresponding to the frequency that is ranked at the top of the list is selected as the
target cell of handover.
– If this switch is turned off or the UE does not support UMTS-to-LTE handover, the
RNC performs a redirection.
If the measurement report contains multiple cells and the UMTS-to-LTE connected
mode priority switch (HO_U2L_CONN_PRIO_SWITCH under the
HoSwitch1(BSC6900,BSC6910) parameter) is turned on, frequencies are
sequenced in a descending order of priority. If two frequencies have the same
priority, they are sequenced in a descending order of signal quality. If the UMTS-to-
LTE connected mode priority switch is turned off, frequencies are sequenced in a
descending order of signal quality. When the UL Unified Overload Control feature
is enabled, the RNC filters out cells carrying heavy traffic. Finally, a maximum of
four FDD LTE frequencies and four TDD LTE frequencies ranked at the top of the
list are selected.
When the UMTS-to-LTE connected mode priority switch is turned on, the LTE frequency
priority to be used is determined as follows:
l When HO_SPID_MM_SWITCH under HoSwitch1(BSC6900,BSC6910) is selected,
the LTE frequency uses the SPID-based dedicated priority, which is specified by the
DediPriority(BSC6900,BSC6910) parameter.
l When HO_SPID_MM_SWITCH under the HoSwitch1(BSC6900,BSC6910) parameter
is not selected and HO_IMSI_MM_SWITCH under the
HoSwitch2(BSC6900,BSC6910) parameter is selected, the LTE frequency uses the
IMSI-based dedicated priority, which is specified by the
DediPriority(BSC6900,BSC6910) parameter.
l When neither HO_SPID_MM_SWITCH under the HoSwitch1(BSC6900,BSC6910)
parameter nor HO_IMSI_MM_SWITCH under the HoSwitch2(BSC6900,BSC6910)
parameter is selected, the LTE frequency uses the connected mode priority, which is
specified by the NPriorityConnect(BSC6900,BSC6910) parameter.
For the procedures of UMTS-to-LTE redirection and handover, see 4.3.5 UMTS-to-LTE PS
Redirection and Handover Procedures.
NOTE
l After LTE measurement is triggered by fast return, the RNC directly releases the RRC connection if
the PS service is released before the RNC receives an LTE measurement report from the UE.
l An SRVCC UE's fast return to the LTE network requires a measurement report. Therefore, a 3C
measurement report of an LTE cell may be sent during the location area update (LAU) procedure.
After receiving the 3C measurement report, the RNC terminates the LAU procedure and triggers a
UMTS-to-LTE fast return. After being handed over or redirected to an LTE cell, the UE performs
combined attach. Hence, the LAU success rate on the CN side is not affected by SRVCC UEs' fast
return to the LTE network.
l If both a 3C report for fast return and an SHO event report are generated, the RNC preferentially
handles the SHO event report.
This chapter describes the feature WRFD-150231 RIM Based UMTS Target Cell Selection
for LTE.
7.1 Overview
In versions earlier than RAN15.0, UMTS and LTE cannot exchange load information even
when the two networks cover the same geographical area.
l The eNodeB does not consider the load status of the target UMTS cell during a circuit
switched fallback (CSFB) from LTE to UMTS. If the target UMTS cell is congested, the
UE may fail to access the UMTS network.
l The eNodeB does not consider the load status of the target UMTS cell during a load-
based handover from LTE to UMTS. This leads to handover preparation failures,
increases the signaling load, and may also increase the possibility that handovers are not
performed in time.
To address these problems, Huawei introduced the RIM Based UMTS Target Cell Selection
for LTE feature. This feature reports the load status of the target UMTS cells to the eNodeB
through the RAN information management (RIM) procedure during a CSFB or load-based
handover from LTE to UMTS. The eNodeB selects a target UMTS cell based on the load
status received, which improves the preparation success rate for load based LTE-to-UMTS
handovers and avoids the ping-pong effect of inter-RAT handovers.
l During a CSFB, the eNodeB preferentially selects a non-overloaded UMTS cell as the
target cell.
l During a load-based handover from LTE to UMTS, the eNodeB preferentially selects a
UMTS cell that is neither congested nor overloaded as the target cell.
For more information about post-CSFB service processing after a target cell is selected, see
CS Fallback Feature Parameter Description. For more information about service processing
after the target cell is selected during a load-based L2U inter-RAT handover, see LTE
document Inter-RAT Mobility Load Balancing Feature Parameter Description.
When RIM messages are exchanged using the eCoordinator, the RIM procedure involves the
eNodeB, eCoordinator, and RNC. Figure 7-2 shows the RIM procedure between the UMTS
and LTE networks.
Figure 7-2 RIM procedure using the eCoordinator to exchange RIM messages
NOTE
Huawei eCoordinator can be used to exchange RIM messages of the RIM procedure when the following
conditions are met: The eNodeB and RNC are both provided by Huawei and connected to the same
eCoordinator. The CNs to which the eNodeB and RNC are connected do not support the RIM procedure
or are not enabled with the RIM procedure. To exchange RIM messages using Huawei eCoordinator
during the RIM procedure, the RIM procedure must be enabled on all the involved NEs. Otherwise,
these NEs will neither send nor receive any RIM message to or from the CN.
The RIM procedure supports two information exchange modes: Single Report and Multiple
Report.
l Single Report
In Single Report mode, the source sends a request, and then the target responds with a
single report. In this feature, the source is the eNodeB, and the target is the RNC.
l Multiple Report
In Multiple Report mode, the target responds with a report upon receiving the initial
request from the source and sends a report to the source each time the load status
changes.
During a CSFB or load-based handover from LTE to UMTS, the RIM procedure uses the
Multiple Report mode to report the load status of target UMTS cells.
For details about the RIM procedure, see section 8c "Signalling procedures between RIM
SAPs" in 3GPP TS 48.018 V11.3.0.
– When the UMTS cell is in the LightLoad state, in which the cell load is smaller than
or equal to the downlink cell power load threshold for the PS CLB state, which is
specified by DlPwrPSClbTrigThd(BSC6900,BSC6910), the RIM message does not
carry this IE.
– When the UMTS cell is in the MidLoad state (between LightLoad and LDR), the
RNC sets the IE to MidLoad.
– When the UMTS cell is in the Load Reshuffling (LDR) state, the RNC sets the IE to
congestion.
– When the UMTS cell is in Overload Control (OLC) state, the RNC sets the IE to
overload.
LoadLevelForLTE(BSC6900,BSC6910) is set to D3 by default. For versions
earlier than eRAN7.0, this parameter does not need to be set. For eRAN7.0 and
later versions, this parameter must be set to D4.
NOTE
When DC-HSDPA carriers are used on the UMTS side, it is recommended that the switch for
optimizing the DC-HSDPA carrier group load decision and broadcasting method be turned on to
estimate the UMTS cell load status more accurately. To turn on this switch, select
PERFENH_DC_HSDPA_GROUP_LOAD_OPT_SWITCH under the
PerfEnhanceSwitch2(BSC6900,BSC6910) parameter.
If this switch is turned on, the RNC considers the load status of the DC-HSDPA carrier group
when reporting the UMTS cell load to the eNodeB. In this case, when either the UMTS cell or the
DC-HSDPA carrier group is in the LDR or OLC state, the RNC reports "congestion" or "overload"
as the UMTS cell load status.
If this switch is turned off, the RNC considers only the UMTS cell load status but does not
consider the DC-HSDPA carrier group's load status.
3. When the load status of the UMTS cell changes, the RNC notifies the eNodeB of the
new load status through the RIM procedure, in which it sets the Overload Flag IE
according to rules in step 2.
NOTE
Huawei has extended the value range of the Overload Flag IE. According to 3GPP protocols, this
IE has only one value (overload). Huawei adds another two values (congestion and MidLoad) for
the IE.
The interval at which the RNC updates the UMTS cell load status that is transferred to the
eNodeB is set by the parameter LoadUptForLTETimerLen(BSC6900,BSC6910).
The maximum number of RIM messages sent by the RNC per second is set by the parameter
LoadUptForLTEMaxNum(BSC6900,BSC6910).
8 Related Features
Impacted Features
None
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE fast return
attempts are reduced.
MRFD-101401 UL Unified Video When this feature is enabled together with the
Steering MRFD-101401 UL Unified Video Steering
feature, a UE performing CS+PS combined
services (including a video service) and
handed over to the UMTS network through
SRVCC/CSFB is subject to the following
restriction: After it finishes the CS service, its
fast return to the LTE network is allowed only
if the target cell's rate assessed by the
eCoordinator reaches the video service
satisfaction rate.
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE PS redirections
are reduced.
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE PS redirections
are reduced.
LOFD-070203 RIM Based LTE The function of selecting LTE cells based on
Target Cell LTE load requires the LOFD-070203 RIM
Selection Based LTE Target Cell Selection feature.
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE PS redirections
are reduced.
LOFD-070203 RIM Based LTE The function of selecting LTE cells based on
Target Cell LTE load requires the LOFD-070203 RIM
Selection Based LTE Target Cell Selection feature.
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE PS redirections
are reduced.
MRFD-101401 UL Unified Video When this feature is enabled together with the
Steering MRFD-101401 UL Unified Video Steering
feature, a UE performing CS+PS combined
services (including a video service) and
handed over to the UMTS network through
SRVCC/CSFB is subject to the following
restriction: After it finishes the CS service, its
fast return to the LTE network is allowed only
if the target cell's rate assessed by the
eCoordinator reaches the video service
satisfaction rate.
LOFD-070203 RIM Based LTE The function of selecting LTE cells based on
Target Cell LTE load requires the LOFD-070203 RIM
Selection Based LTE Target Cell Selection feature.
Impacted Features
Feature ID Feature Name Description
WRFD-160270 Camp & Handover When this feature is enabled together with the
Based on SPID WRFD-160270 Camp & Handover Based on
SPID feature, UMTS-to-LTE PS redirections
are reduced.
LOFD-070203 RIM Based LTE The function of selecting LTE cells based on
Target Cell LTE load requires the LOFD-070203 RIM
Selection Based LTE Target Cell Selection feature.
Impacted Features
Feature ID Feature Name Description
MRFD-101401 UL Unified Video When this feature is enabled together with the
Steering MRFD-101401 UL Unified Video Steering
feature, a UE performing CS+PS combined
services (including a video service) and
handed over to the UMTS network through
SRVCC/CSFB is subject to the following
restriction: After it finishes the CS service, its
fast return to the LTE network is allowed only
if the target cell's rate assessed by the
eCoordinator reaches the video service
satisfaction rate.
Impacted Features
None
Impacted Features
None
Impacted Features
None
LOFD-001022 SRVCC to UTRAN The use of this feature depends on the SRVCC
feature on the LTE side.
Impacted Features
None
If the CN can carry the "Out of Utran" IE in the Iu Release Command message, the CN can
thus notify the RNC that the UE in the CELL_FACH or CELL_PCH state has reselected an
LTE cell. After receiving the message, the RNC immediately releases RRC resources of the
UE and counts this release attempt as a normal one, which does not affect the call drop rate of
UEs in the CELL_FACH or CELL_PCH state.
Measurement-based fast return prevents the out-of-service problem of UEs due to LTE
coverage holes. However, compared with blind redirection-based fast return, measurement-
based fast return has a longer delay because it requires inter-RAT measurement after a UE
finishes the CS service.
RSCP measurement-based fast return can improve the success rate of blind redirections and
reduce the impact of LTE measurement in compressed mode.
Since this feature can prevent the out-of-service problem of UEs, there will be more online
CSFB UEs and the value of the
VS.U2LTEHO.RRCRelease.FastReturn.Blind(BSC6900,BSC6910) counter will be
increased after this feature is enabled.
redirection may not have strong signals, affecting the success rate of UMTS-to-LTE
redirections. To improve the success rate of UMTS-to-LTE redirections in this case,
increase the threshold for signal strength of neighboring LTE cells by setting the
TargetRatThdRSRP(BSC6900,BSC6910) and
TargetRatThdRSRQ(BSC6900,BSC6910) parameters in the RNC MML command SET
UU2LTEHONCOV, ADD UCELLU2LTEHONCOV, or MOD
UCELLU2LTEHONCOV.
In areas with weak LTE weak coverage, UEs enter the compressed mode more frequently,
thereby increasing the call drop rate. The impact on the call drop rate is noticeable when a
large number of UEs initiate LTE signal quality measurement at the same time. If there are
only few UEs processing PS services in a cell, the PS throughput of a UE decreases by about
30% after the UE enters the compressed mode. When a large number of UEs processing PS
services enter the compressed mode, the impact on these UEs' PS throughput is not
significant.
decreases user admission failures. As a result, the overall UMTS and LTE network
performance is enhanced. For example, the RRC congestion rate declines.
The target LTE cell is selected based on the cell load, which reduces ping-pong handovers and
redirections between UMTS and LTE. However, the target LTE cell selected during a UMTS-
to-LTE redirection may not have strong signals, affecting the success rate of UMTS-to-LTE
redirections. To improve the success rate of UMTS-to-LTE redirections in this case, increase
the threshold for signal strength of neighboring LTE cells by setting the
TargetRatThdRSRP(BSC6900,BSC6910) and TargetRatThdRSRQ(BSC6900,BSC6910)
parameters in the RNC MML command SET UU2LTEHONCOV, ADD
UCELLU2LTEHONCOV, or MOD UCELLU2LTEHONCOV.
The SRVCC from LTE to UMTS with PS Handover feature enables admission of the PS RB
with a reduced rate when the UMTS load is relatively high. It helps increase the SRVCC
handover preparation success rate.
With this feature enabled, if the timer for an incoming relocation request message from the PS
domain expires after the RNC receives an incoming relocation request message from the CS
domain, the RNC allows the incoming relocation of the CS domain. This mechanism
improves the SRVCC handover preparation success rate.
Network Performance
The change in this feature has no impact.
Network Performance
This feature reduces the time required for UEs to return to the LTE network from the serving
UMTS network, improving user experience.
Compressed mode LTE measurement is started after an SRVCC UE finishes its voice service.
If the UE is located in an LTE coverage hole or weak LTE coverage area at this moment, the
compressed mode LTE measurement fails. This problem may deteriorate the UMTS network's
KPIs such as the call drop rate.
LTE measurement is triggered after an SRVCC UE (without any PS service) finishes its voice
service. If the RNC receives a 3C measurement report for LTE during setup of the new PS
RB, a fast return will be triggered for the SRVCC UE, resulting in the failure of the new PS
RB setup. However, this type of procedure overlapping rarely happens and its impact can be
ignored.
10 Engineering Guidelines
10.1.2 Deployment
This section describes how to activate, verify, and deactivate the optional feature
WRFD-020126 Mobility Between UMTS and LTE Phase 1. For details about how to
configure this feature on the LTE side, see the related documents provided by the LTE
equipment vendor.
Requirements
l Dependencies on Hardware
None
l Dependencies on Other Features
None
l License
For details about how to activate the license, see License Management Feature
Parameter Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Data Preparation
Parameter Name Parameter ID Setting Notes Data Source
If the function of UMTS-to-LTE cell reselection of UEs in the CELL_FACH state needs to be
enabled, set parameters in the following table.
The RNC sends SIB19 messages to UEs if the cell is configured with information about the frequencies
of neighboring LTE cells and the SIB19 check box under the SIB Switch parameter is selected. The
SIB19 message contains the neighboring LTE cell list and LTE cell reselection parameters.
Step 2 Run the RNC MML command ADD UCELLSELRESEL or MOD UCELLSELRESEL
with the Absolute priority level of the serving cell parameter set to an appropriate value.
The default value is recommended.
Step 4 Run the RNC MML command ADD UNODEB or MOD UNODEB with the NodeB
Protocol Version parameter set to R8 or a later version.
Step 5 On the LTE side, configure the related parameters to activate this feature.
For details about how to activate this feature on the LTE side, see the related documents
provided by the LTE equipment vendor. If Huawei LTE equipment is used, see Mobility
Management in Connected Mode Feature Parameter Description for eRAN.
Step 6 (Optional) To enable the UMTS-to-LTE quick cell reselection function, run the RNC MML
command SET URRCTRLSWITCH with
FAST_RETURN_LTE_BY_CELL_SELECT_SWITCH under the Process Control
Switch 4 parameter selected.
Step 7 (Optional) To enable the optimized procedure of releasing a UE after an inter-RAT cell
reselection, run the RNC MML command SET URRCTRLSWITCH with
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH under the Optimization Switch6
parameter selected.
NOTE
When the CN has not delivered an SRNS context request and this function has been enabled, the RNC
will immediately release radio resources upon receiving an IU Release Command message containing
the "OUT of UTRAN" IE. When the CN has delivered an SRNS context request, the RNC regards that
the UE has moved to the LTE cell and will release radio resources immediately after receiving the IU
Release Command message, regardless of whether this function has been enabled.
Step 8 (Optional) To enable UMTS-to-LTE cell reselection of UEs in the CELL_FACH state,
perform the following operations:
1. Run the RNC MML command ADD UCELLSELRESEL or MOD
UCELLSELRESEL with FACH Absolute Priority-based Cell Reselect SW set to ON
to enable absolute priority-based measurement and reselection in the CELL_FACH state.
2. Run the RNC MML command ADD UCELLSELRESEL or MOD
UCELLSELRESEL with FACH Absolute Priority-based Measure Layer set to an
appropriate value.
3. Run the RNC MML command ADD UCELLMEAS or MOD UCELLMEAS, with
FACH Measurement Indicator set to INTER_RAT or
INTER_FREQ_AND_INTER_RAT.
4. Run the RNC MML command ADD UCELLNFREQPRIOINFO or MOD
UCELLNFREQPRIOINFO with RSRQ Delivery in SIB19 Switch set to TRUE.
----End
Method 1:
NOTE
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging out of
the parameter setting interface.
Set parameters on the CME according to the operation sequence in Table 10-1. For
instructions on how to perform the CME single configuration, see CME Single Configuration
Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Absolute NPriority(BS
Priority Level C6900,BSC69
of the E-UTRA 10)
Frequency
Method 2:
This feature can be batch activated using the CME. For detailed operations, see the
following section in the CME product documentation or online help: CME
Management > CME Guidelines > Enhanced Feature Management > Feature
Operation and Maintenance
Step 2 On the LTE side:
For details about how to activate this feature on the LTE side, see the related documents
provided by the LTE equipment vendor. If Huawei LTE equipment is used, see Mobility
Management in Connected Mode Feature Parameter Description for eRAN.
----End
Activation Observation
Step 1 In the Navigation Tree pane on the RNC LMT, click the Trace tab. In the displayed Trace
Navigation Tree pane, double-click UMTS Services. On the unfolded list, double-click Uu
Interface Trace. In the displayed Uu Interface Trace dialog box, select
RRC_SYS_INFO_TYPE19 to trace Uu interface SIB19 message, as shown in Figure 10-1.
Step 3 (Optional) In the Uu interface tracing data, check whether there is a "cell-fach-meas-ind" IE
in the SIB19 message. If so, UEs in the CELL_FACH state can perform cell reselections to
the LTE network.
Step 4 Observe signaling messages on the UE side. If the UE in the CELL_FACH, CELL_PCH,
URA_PCH state or IDLE mode reselects an LTE cell and sends an RRC CONNECTION
REQUEST message in the LTE cell to perform the Tracking Area Update process after
receiving SIB19, the UE has completed the UMTS-to-LTE cell reselection.
----End
----End
When configuring the Mobility Between UMTS and LTE Phase 1 feature on the CME, perform a single
configuration first, and then perform a batch modification if required. Configure the parameters of a
single object before a batch modification. Perform a batch modification before logging out of the
parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
l If the LTE network does not provide continuous coverage, it is recommended that the
LTE measurement-based fast return function be enabled. If the LTE network provides
continuous coverage, the blind fast return function is recommended.
– Measurement-based fast return: If no neighboring LTE cell is configured, the non-
neighboring-cell-based redirection function must be enabled. If LTE neighboring
cells have been configured, either the neighboring-cell-based redirection or non-
neighboring-cell-based redirection function can be enabled.
– Blind fast return: This type of fast return is implemented through non-neighboring-
cell-based redirection irrespective of whether the non-neighboring-cell-based
redirection switch has been turned on.
l It is recommended that the RSCP measurement-based fast return function be enabled in
LTE and UMTS co-site scenarios.
l UMTS and LTE are deployed together and UMTS and LTE coverage overlaps.
l The LTE LOFD-001033 CS Fallback to UTRAN feature has been activated on the LTE
side.
l The duration for a UE to return to LTE from UMTS has been obtained. The duration
starts when the UE receives an RRC CONNECTION RELEASE message from the
UTRAN and ends when the UE initiates an RRC CONNECTION REQUEST message in
the EUTRAN. The duration is in the UE logs.
10.2.3 Planning
None
10.2.4 Deployment
Requirements
l Other Features
The LTE feature LOFD-001033 CS Fallback to UTRAN has been activated on the LTE
side. For details about how to activate this feature, see LTE document CS Fallback
Feature Parameter Description.
l Requirements for other NEs as well as for network equipment and transmission devices
from other vendors
– UE
The UE supports both UMTS and LTE.
If the handover-based fast return to LTE needs to be supported, the UE needs to
support UMTS-to-LTE handover.
– Other NEs
If CS fallback based on a PS handover needs to be supported, the cause value in the
handover request message must be "CS Fallback triggered" on the LTE side or the
handover request message contains the "CSFB Information" IE and the IE's value is
"CSFB" or "CSFB High Priority."
– CN
The IU release command message sent by the MSC includes a CSFB indication.
If the handover-based fast return to LTE needs to be supported, the SGSN needs to
support UMTS-to-LTE handover.
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Data Preparation
Parameter Name Parameter ID Setting Notes Data Source
Fast Return To LTE FastReturnToLTES To turn on the cell- Radio network plan
Switch witch(BSC6910,BS level switch for (internal)
C6900) measurement-based
fast return to LTE
after the release of a
CSFB UE's call,
select
HO_CSFB_BASE
D_MEAS_FAST_R
ETURN_SWITCH
under this parameter.
Fast Return To LTE FastReturnToLTES To turn on the cell- Radio network plan
Switch witch(BSC6900,BS level switch for (internal)
C6910) RSCP measurement-
based fast return to
LTE after the release
of a CSFB UE's call,
select
HO_CSFB_BASE
D_RSCP_FAST_R
ETURN_SWITCH
under this parameter.
Precautions
None
Step 1 (Optional) In RAN sharing or MOCN scenarios, run the RNC MML command SET
LICENSE. In this step, set the value of Fast Return from UMTS to LTE-Erlang and Fast
Return from UMTS to LTE-kbps for the primary and secondary operators.
Step 2 Run the RNC MML command ADD UCELLSELRESEL or MOD UCELLSELRESEL. In
this step, set Absolute priority level of the serving cell to an appropriate value.
Step 3 Run the RNC MML command ADD UCELLNFREQPRIOINFO or MOD
UCELLNFREQPRIOINFO. In this step, set E-UTRA Absolute Radio Frequency
Channel Number and Absolute Priority Level of the E-UTRA Frequency to appropriate
values.
NOTE
The value of Absolute priority level of the serving cell must be less than that of Absolute Priority
Level of the E-UTRA Frequency.
Step 4 (Optional) To turn on the UMTS-to-LTE connected mode priority switch, run the RNC MML
command SET UCORRMALGOSWITCH and select HO_U2L_CONN_PRIO_SWITCH
----End
To activate the UMTS-to-LTE fast return and enhanced UMTS-to-LTE fast return functions,
perform the following steps:
Step 1 Run the cell- or RNC-level command to activate the UMTS-to-LTE fast return and enhanced
UMTS-to-LTE fast return functions.
l Run the cell-level command to enable the UMTS-to-LTE fast return and enhanced
UMTS-to-LTE fast return functions as follows:
a. To enable the UMTS-to-LTE fast return function on the cell level, run the RNC
MML command ADD UCELLHOCOMM or MOD UCELLHOCOMM with
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH selected under Fast Return
To LTE Switch.
b. To enable the enhanced UMTS-to-LTE fast return function on the cell level, run the
RNC MML command ADD UCELLHOCOMM or MOD UCELLHOCOMM
with PERFENH_PS_FAST_RETURN_LTE_SWITCH selected under Fast
Return To LTE Switch.
l Run the RNC-level command to enable the UMTS-to-LTE fast return and enhanced
UMTS-to-LTE fast return functions as follows:
a. To enable the UMTS-to-LTE fast return function on the RNC level, run the RNC
MML command SET UCORRMALGOSWITCH with
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH selected under HandOver
Switch.
b. To enable the enhanced UMTS-to-LTE fast return function on the RNC level, run
the RNC MML command SET UCORRMPARA with
PERFENH_PS_FAST_RETURN_LTE_SWITCH selected under Performance
Enhancement Switch 3.
NOTE
When both RNC-level and cell-level parameters related to UMTS-to-LTE fast return and enhanced
UMTS-to-LTE fast return are configured, configurations of cell-level parameters take precedence.
----End
To activate LTE measurement-based fast return, perform the following steps:
Step 1 Repeat the preceding steps to enable the UMTS-to-LTE fast return function.
Step 2 Enable the LTE measurement-based fast return function by running the cell- or RNC-level
command as follows:
l Run the cell-level command to enable the LTE measurement-based fast return function.
Run the RNC MML command ADD UCELLHOCOMM or MOD UCELLHOCOMM
with HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH selected from Fast
Return To LTE Switch.
l Run the RNC-level command to enable the LTE measurement-based fast return function.
Run the RNC MML command SET UCORRMALGOSWITCH with
HO_CSFB_BASED_MEAS_FAST_RETURN_SWITCH selected under HandOver
Switch1.
NOTE
When both RNC-level and cell-level parameters related to LTE measurement-based fast return are
configured, configurations of cell-level parameters take precedence.
Step 3 (Optional) If no neighboring LTE cell is configured, you must enable the non-neighboring-
cell-based redirection function by selecting
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the HandOver Switch1
parameter in the RNC MML command SET UCORRMALGOSWITCH.
Step 4 (Optional) To enable the fast return function of CSFB UEs with only signaling connections,
run the RNC MML command SET UCORRMPARA with
PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH selected under Performance
Enhance Switch 7.
Step 5 (Optional) Run the RNC MML command SET UU2LTEHONCOV with LTE Measurement
Duration with Only Signaling and U2L RSRP Threshold with Only Signaling or U2L
RSRQ Threshold with Only Signaling set to appropriate values.
Step 6 (Optional) Run the RNC MML command SET UCORRMALGOSWITCH and select
HO_HANDOVER_FAST_RETURN_TO_LTE_SWITCH under the HandOver Switch1
parameter to enable the handover-based fast return to LTE cells.
Step 7 (Optional) Run the RNC MML command SET UCORRMPARA and select
PERFENH_FAST_RETURN_OPT_SWITCH under the Performance Enhance Switch 7
parameter to enable the optimized function of UMTS-to-LTE fast return.
----End
(Optional) To activate the RSCP measurement-based fast return function, perform the
following steps:
Step 1 Repeat the preceding steps to enable the UMTS-to-LTE fast return function.
Step 2 Enable the RSCP measurement-based fast return function by running the cell- or RNC-level
command as follows:
l Run the cell-level command to enable the RSCP measurement-based fast return function.
Run the RNC MML command ADD UCELLHOCOMM or MOD UCELLHOCOMM
with HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH selected from Fast
Return To LTE Switch.
l Run the RNC-level command to enable the RSCP measurement-based fast return
function.
Run the RNC MML command SET UCORRMALGOSWITCH with
HO_CSFB_BASED_RSCP_FAST_RETURN_SWITCH selected under HandOver
Switch1.
Step 4 Run the RNC MML command SET UU2LTEHONCOV with the RSCP Measure Timer for
Non-coverage-based U2L parameter set to an appropriate value. This parameter specifies the
RSCP measurement period for the function of RSCP measurement-based fast return. The
default value D2000 is recommended.
----End
NOTE
When both RNC-level and cell-level parameters related to RSCP measurement-based fast return are
configured, configurations of cell-level parameters take precedence.
(Optional) To enable fast return for CSFB supplementary services, perform the
following steps:
After enabling UMTS-to-LTE fast return and enhanced UMTS-to-LTE fast return, perform
the following operations:
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
NOTE
In RAN sharing or MOCN scenarios, licenses cannot be operated on the CME. Therefore, you
need to run the RNC MML command SET LICENSE. In this step, set the value of Fast Return
from UMTS to LTE-Erlang and Fast Return from UMTS to LTE-kbps for the primary and
secondary operators.
Absolute NPriority(B
Priority SC6900,BS
Level of the C6910)
E-UTRA
Frequency
Activation Observation
With this feature activated, if a UE that has fallen back to UMTS from LTE has released the
CS service in the UMTS cell, the RNC sends the UE an RRC Connection Release message.
The Redirection info IE in this message carries the information about the frequency used by
the neighboring LTE cell, as shown in Figure 10-3.
Run the RNC MML command SET UCORRMALGOSWITCH and clear the
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH check box under the HandOver
Switch parameter.
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
Set parameters on the CME according to the operation sequence in Table 10-4. For
instructions on how to perform the CME single configuration, see CME Single Configuration
Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
After measurement-based UMTS-to-LTE fast return is enabled, the RNC also starts LTE
measurement after receiving a Disconnect message. LTE measurement in this case risks a call
drop because it requires delivery of the RB reconfiguration and measurement control
messages. When the coverage is normal, a UE has proactively ended the voice services, not
resulting in an actual call drop and therefore not affecting user experience. The number of call
drops of UEs in disconnected mode can be measured using the following counter.
10.2.7 Troubleshooting
Not involved
When deploying this feature, determine which function should be enabled, the UMTS-to-LTE
PS redirection or handover, based on which feature is supported by the CN and the proportion
of UEs supporting this feature.
If the CN does not support the UMTS-to-LTE PS handover, you are advised to enable only the
UMTS-to-LTE PS redirection. If the CN supports the UMTS-to-LTE PS handover, it is
recommended that:
l Only the UMTS-to-LTE PS redirection be enabled when few UEs support the UMTS-to-
LTE PS handover.
l Both the UMTS-to-LTE PS redirection and handover be enabled when most UEs support
the UMTS-to-LTE PS handover. In this case, the UEs supporting UMTS-to-LTE PS
handover will implement the UMTS-to-LTE PS handover and the UEs not supporting
UMTS-to-LTE PS handover will implement the UMTS-to-LTE PS redirection. In this
case, the UEs supporting UMTS-to-LTE PS handover will implement the UMTS-to-LTE
PS handover and the UEs not supporting UMTS-to-LTE PS handover will implement the
UMTS-to-LTE PS redirection.
l The UMTS-to-LTE PS redirection be enabled when operators do not want to configure
neighboring LTE cells.
NOTE
You must configure neighboring LTE cells before enabling the UMTS-to-LTE PS handover.
10.3.3 Planning
None
10.3.4 Deployment
Requirements
l License
For details about how to activate the license, see License Management Feature
Parameter Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The UE must support 3GPP Release 8 or later.
– The CN must support UMTS-to-LTE PS redirections.
– The SGSN is able to obtain subscription data of the UE from the HLR or HSS. If
the UE does not subscribe to LTE services, the SGSN must use the E-UTRAN
Service Handover IE in the RAB Assignment Request message to inform the RNC
that the UE cannot be redirected to the LTE network the SGSN. This information is
sent through the E-UTRAN Service Handover IE in the RAB Assignment Request
message. If the SGSN cannot send the E-UTRAN Service Handover IE, the
operator must enable UMTS-to-LTE PS redirections for all UMTS/LTE multi-mode
UEs in the network.
l Dependencies on other features
None
l Dependencies on hardware
None
Data Preparation
Table 10-6 lists the data to be prepared for deploying Coverage Based PS Redirection from
UMTS to LTE.
LTE Report LTEReportMod Set this parameter to the default Default value/
Mode e(BSC6900,BS value. Recommended
C6910) value
Layer 3 Filter U2LTEFilterCo Set this parameter to the default Default value/
Coefficient for ef(BSC6900,BS value. Recommended
LTE C6910) value
Measurement
LTE Period LTEPeriodRep Set this parameter only when Default value/
Reporting ortInterval(BS LTEReportMode(BSC6900,BSC Recommended
Interval C6900,BSC691 6910) is set to value
0) PERIODICAL_REPORTING.
Do not set this parameter to
NON_PERIODIC_REPORT,
because UE behaviors are
unpredictable when this
parameter is set to
NON_PERIODIC_REPORT. If
the value of this parameter is too
small, the measurement results
are reported too frequently,
increasing the signaling burden
on the RNC. If this parameter
value is too large, the UTRAN
cannot detect changes in the LTE
cell signal quality in time,
delaying UMTS-to-LTE
redirection and resulting in call
drops.
The default value is
recommended.
LTE Period HystforPeriodL Set this parameter only when Default value/
Reporting HO TE(BSC6900,B LTEReportMode(BSC6900,BSC Recommended
Hysteresis SC6910) 6910) is set to value
PERIODICAL_REPORTING.
The default value is
recommended.
U2L Blind U2LBlindRedir Turn on this switch if UMTS and Default value/
Redirect Switch Switch(BSC690 LTE are deployed at one site and Recommended
0,BSC6910) share sectors and the LTE band is value
lower than the UMTS band.
Precautions
After the Coverage Based PS Redirection from UMTS to LTE feature is enabled and event 2D
is triggered, a UE not supporting LTE measurements in connected mode does not perform
coverage-based UMTS-to-LTE PS redirections. In this case:
l If a GSM network or inter-frequency UMTS network is deployed, the UE measures the
signal quality of the neighboring GSM cells or inter-frequency neighboring UMTS cells.
l If no GSM network or inter-frequency UMTS network is deployed, the UE is not
redirected to the LTE network until event 1F is triggered.
Event 1F indicates that the UMTS signals are weak and call drops may occur. Therefore,
the UE is shifted to the LTE network through a blind redirection when event 1F is
triggered. It is recommended that the trigger threshold for event 1F be set to the same
value as that for event 2D in areas where no GSM and inter-frequency UMTS networks
are deployed.
NOTE
– You can run the MOD ULTECELL command instead of the ADD ULTECELL command in
sub-step 1 if LTE cells have been configured.
– Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a
group that includes operators of LTE cells. If the group includes only operators of UMTS cells,
UMTS-to-LTE handovers will fail.
– If HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH in the LST
UCORRMALGOSWITCH command is deselected
(HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH-0), the RNC uses
neighboring-LTE-cell-based redirections or blind redirections. The service-, coverage-, and
load-based UMTS-to-LTE PS redirection or handover features share the
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH switch.
2. If a neighboring LTE cell or blind neighboring LTE cell has not been configured, run the
RNC MML command ADD ULTENCELL to configure neighboring LTE cells. When
configuring a blind neighboring LTE cell, set Blind HO Neighboring Cell Flag to
TRUE.
NOTE
If a neighboring LTE cell has been configured, you can run the MOD ULTENCELL command to
reconfigure the neighboring LTE cell in sub-step 2.
l If non-neighboring-LTE-cell-based redirection or blind redirection is allowed, you need
to configure LTE frequencies. The procedure is as follows: Run the RNC MML
command ADD UCELLNFREQPRIOINFO to add information about the priorities of
frequencies for neighboring LTE cells of the UMTS cell.
Step 2 Based on Table 10-6, run the RNC MML command SET UU2LTEHOCOV to set RNC-
level parameters related to the coverage-based UMTS-to-LTE measurement algorithm. The
RNC sends these parameters to the UE through a measurement control message.
Step 3 (Optional) If parameters related to the measurement algorithm need to be independently set
for a cell, run the RNC MML command ADD UCELLU2LTEHOCOV to set cell-level
parameters related to the service-based UMTS-to-LTE measurement algorithm based on
Table 10-6.
NOTE
If related parameters have been configured for a cell, you can run the MOD UCELLU2LTEHOCOV
command to modify them.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level parameters are unavailable, the cell uses the
RNC-level parameters.
Step 4 Run the RNC MML command MOD UTYPRABBASIC to modify the basic information
about a typical RAB. In this step, set Service-Based Handover to LTE Allowed to
HO_TO_EUTRAN_SHOULD_BE_PERFORM to allow UMTS-to-LTE PS redirections or
blind redirections.
Step 5 Run the RNC MML command SET UCORRMALGOSWITCH to enable coverage-based
UMTS-to-LTE PS redirections or blind redirections. In this step, select
HO_LTE_PS_OUT_SWITCH under the HandOver Switch parameter and
HO_U2L_COV_PS_REDIRECT_SWITCH under the HandOver Switch1 parameter.
NOTE
Step 7 (Optional) For terminals that do not support LTE measurement, run the RNC MML command
MOD UCELLHOCOMM to enable the blind redirection to LTE for a specific cell. In this
step, U2L Blind Redirect Switch is set to ON.
Step 8 (Optional) To avoid pingpong redirections, run the RNC MML command SET UHOCOMM
with U2LBlindRedirPingpongTimer(BSC6900,BSC6910) set to an appropriate value to so
that a penalty timer is started for UEs that attempt to access the UMTS network again within
30 seconds after shifting from UMTS to LTE through blind redirections.
Step 9 (Optional) If the DC-HSDPA feature is enabled, run the RNC MML command SET UCMCF
with MC-HSDPA and LTE CM Coexist Indicator set to TRUE.
Step 10 (Optional) If EHSPACMPermissionInd(BSC6900,BSC6910),
HsdpaCMPermissionInd(BSC6900,BSC6910), or
McHsdpaLteCMPermissionInd(BSC6900,BSC6910) is set to FALSE, run the RNC MML
command SET UCORRMALGOSWITCH with the
PS_CMACTIVE_PROCESS_OPT_SWITCH check box under PS Rate Negotiation
Switch selected.
Step 11 If the LTE system supports extended frequency bands (26 to 31), run the RNC MML
command SET UCORRMALGOSWITCH with HO_MC_EXT_LTE_BAND_SWITCH
under the HandOver Switch2 parameter selected.
Step 12 Run the RNC MML command SET UCORRMPARA with the
PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING check box under
Performance Enhancement Switch 5 selected to prohibit UEs from attempting UMTS-to-
LTE redirections or handovers when they are performing CS paging procedures.
Step 13 (Optional)When RAN Sharing or MOCN is enabled, run the RNC MML command SET
LICENSE with the Coverage based PS Redirection from UMTS to LTE-kbps parameter
specified for the primary and secondary operators.
Step 14 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_11_BIT26 under the Reserved Switch 11 parameter selected to
allow coverage-based UMTS-to-LTE redirections or handovers only on LTE subscribers.
----End
//Turning on the switch for LTE subscriber information learning and the switch
for allowing only LTE subscribers to perform coverage-based U2L handover or
redirection when the RNC cannot obtain LTE subscriber information from the CN
SET UALGORSVPARA: RsvSwitch11=RESERVED_SWITCH_11_BIT26-1;
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Blind HO BlindFlag(BSC6
Neighboring Cell 900,BSC6910)
Flag
Measurement LTEMeasQuanO
Quantity for f3A(BSC6900,BS
Event 3A in LTE C6910)
3A Event Hystfor3A(BSC6
Hysteresis 900,BSC6910)
LTE U2LTEMeasTim
Measurement e(BSC6900,BSC6
Timer Length 910)
HandOver HoSwitch1(BSC6
Switch1 900,BSC6910)
Activation Observation
For details about activation observation, see section 10.3.5 Performance Monitoring.
----End
When configuring the WRFD-150219 Coverage Based PS Redirection from UMTS to LTE on the CME,
perform a single configuration first, and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 on the wizard interface to obtain online help.
After this feature is enabled, observe the values of the following counters:
l VS.U2LTEHO.RRCRelease.Coverage(BSC6900,BSC6910)
If the value of this counter is not 0, the event-2D-triggered coverage-based UMTS-to-
LTE PS redirection takes effect.
l VS.U2LTEHO.RRCRelease.Coverage.EmergBlind(BSC6900,BSC6910)
If the value of this counter is not 0, the event-1F-triggered coverage-based UMTS-to-
LTE PS blind redirection takes effect.
10.3.7 Troubleshooting
N/A
l UMTS and LTE are deployed together and UMTS and LTE coverage overlaps.
l There are UMTS/LTE dual-mode UEs on the network.
l The eNodeB, MME, and SGSN all support UMTS-to-LTE PS handovers.
l Parameter settings of events 2D and 2F have been obtained. For details about events 2D
and 2F, see "Event 2D/2F" in 4.3.2.4 Measurements.
10.4.3 Planning
None
10.4.4 Deployment
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The eNodeB, MME, SGSN, and UE support UMTS-to-LTE PS handovers.
– The UE supports 3GPP Release 8 or later. It also supports LTE measurements.
– The SGSN supports 3GPP Release 8 or later and UMTS-to-LTE PS handovers. It
can obtain subscription data of the UE from the HLR or HSS. If the UE does not
subscribe to LTE services, the SGSN must be able to inform the RNC that the UE
cannot be handed over to the LTE network. This information is sent through the E-
UTRAN Service Handover IE in the RAB Assignment Request message. If the
SGSN cannot send the E-UTRAN Service Handover IE, the operator must enable
UMTS-to-LTE PS handovers for all UMTS/LTE multimode UEs in the network.
– The neighboring LTE cell has been configured. For details about how to configure a
neighboring LTE cell, see BSC6900 UMTS Initial Configuration Guide or BSC6910
UMTS Initial Configuration Guide.
l Other Features
None
l Hardware
None
Data Preparation
Table 10-10 lists the data to be prepared for deploying Coverage Based PS Handover from
UMTS to LTE.
Table 10-10 Data to prepare before activating Coverage Based PS Handover from UMTS to
LTE
Parameter Name Parameter ID Setting Notes Data Source
LTE Report Mode LTEReportMode(B Set this parameter to the Default value/
SC6900,BSC6910) default value. Recommended
value
Thd for Cov U2L U2LPhyChFailNu To enable the function of Default value/
HO Fail by Phy m(BSC6900,BSC69 preventing frequent retries Recommended
CH Fail 10) after a UMTS-to-LTE PS value
handover failure, set this
parameter to a non-zero
value.
Precautions
None
You can run the MOD ULTECELL command to modify the configuration if an LTE cell has been
configured. Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a
group that includes operators of LTE cells. If the group includes only operators of UMTS cells, UMTS-
to-LTE handovers will fail.
Step 2 If a neighboring LTE cell has not been configured, run the RNC MML command ADD
ULTENCELL to configure a neighboring LTE cell.
Step 3 Based on Table 10-10, run the RNC MML command SET UU2LTEHOCOV to set RNC-
level parameters related to the coverage-based UMTS-to-LTE measurement algorithm. The
RNC sends the parameter settings to the UE through a measurement control message.
Step 4 (Optional) If parameters related to the measurement algorithm for a cell need to be
independently set, run the RNC MML command ADD UCELLU2LTEHOCOV to set cell-
level parameters related to the coverage-based UMTS-to-LTE measurement algorithm based
on Table 10-10.
NOTE
You can run the MOD UCELLU2LTEHOCOV command instead of the ADD
UCELLU2LTEHOCOV command in step 4 if the related parameters have been configured for the cell.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level measurement-related parameters are
unavailable, the cell uses the RNC-level measurement-related parameters.
Step 5 Run the RNC MML command MOD UTYPRABBASIC with Service-Based Handover to
LTE Allowed set to HO_TO_EUTRAN_SHOULD_BE_PERFORM to allow UMTS-to
LTE PS handover.
Step 6 Run the RNC MML command SET UCORRMALGOSWITCH to enable coverage-based
UMTS-to-LTE PS redirections or blind redirections. In this step, select
HO_LTE_PS_OUT_SWITCH under the HandOver Switch parameter and
HO_U2L_COV_PS_HO_SWITCH under the HandOver Switch1 parameter.
Step 8 (Optional) If the DC-HSDPA feature is enabled, run the RNC MML command SET UCMCF
with MC-HSDPA and LTE CM Coexist Indicator set to TRUE.
Step 9 (Optional) Run the RNC MML command SET UU2LTEHOCOV to enable the function of
preventing frequent retries after a UMTS-to-LTE PS handover failure. In this step, set Thd
for Cov U2L HO Fail by Phy CH Fail and Inter-RAT HO Physical Channel Failure
Penalty Timer to appropriate values.
Step 11 If the LTE system supports extended frequency bands (26 to 31), run the RNC MML
command SET UCORRMALGOSWITCH with HO_MC_EXT_LTE_BAND_SWITCH
under the HandOver Switch2 parameter selected.
Step 12 Run the RNC MML command SET UCORRMPARA with
PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING under Performance
Enhancement Switch 5 selected to prohibit UEs from attempting UMTS-to-LTE redirections
or handovers when they are performing CS paging procedures.
Step 13 (Optional) When RAN Sharing or MOCN is enabled, run the RNC MML command SET
LICENSE to set the Coverage based PS Handover from UMTS to LTE-kbps parameter
for the primary and secondary operators.
Step 14 Enable the function of data forwarding during UMTS-to-LTE handovers.
1. Run the RNC MML command SET URRCTRLSWITCH with
U2L_RELOC_MSG_TAKE_ERAB_SWITCH under Optimization Switch 5 selected
to enable a RANAP RELOCATION REQUIRED message to contain the E-RAB IE.
2. (Optional) Run the RNC MML command SET URRCTRLSWITCH with
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH under the Optimization Switch 5
parameter selected to turn on the U2L PS service user-plane interruption time reduction
switch.
3. When the direct tunnel function is enabled on the RNC, the following operations must
also be performed:
a. Run the RNC MML command ADD ADJNODE to configure the adjacent node
LTE S-GW for the RNC.
b. Run the RNC MML command ADD IPRT to configure a route between the RNC
and the LTE S-GW.
c. Run the following RNC MML commands separately for a BSC6900 and a
BSC6910 to configure a UP data channel between the RNC and LTE S-GW: ADD
IPPATH and ADD IPPOOL.
NOTE
When the direct tunnel function is not enabled on the RNC, only the routes and UP data channels
between the LTE S-GW and SGSN need to be configured on the CN side.
Step 15 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_11_BIT26 under the Reserved Switch 11 parameter selected to
allow coverage-based UMTS-to-LTE redirections or handovers only on LTE subscribers.
----End
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
1. Configure a single object (such as a cell) on the CME.
Set parameters on the CME according to the operation sequence in Table 10-11. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Measurement LTEMeasQuanO
Quantity for f3A(BSC6900,BS
Event 3A in LTE C6910)
3A Event Hystfor3A(BSC6
Hysteresis 900,BSC6910)
LTE U2LTEMeasTim
Measurement e(BSC6900,BSC6
Timer Length 910)
Inter-RAT HO PenaltyTimeForP
Physical Channel hyChFail(BSC69
Failure Penalty 00,BSC6910)
Timer
HandOver HoSwitch1(BSC6
Switch1 900,BSC6910)
Activation Observation
Check the value of the VS.U2LHO.AttRelocPrepOutPS.Coverage(BSC6900,BSC6910).
This counter provides the number of attempts for outgoing coverage-triggered UMTS-to-LTE
PS handovers for a cell. If the counter value is not 0, the feature has taken effect.
Configure the parameters of a single object before a batch modification. Configure the parameters of a
single object before a batch modification. Perform a batch modification before logging out of the
parameter setting interface.
1. Configure a single object (such as a cell) on the CME.
Set parameters on the CME according to the operation sequence in Table 10-12. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
The following table lists performance counters related to cell-level handover failures.
The following table lists counters related to neighboring cells of coverage-based UMTS-to-
LTE PS handovers.
The following table lists counters related to neighboring cells of handover failures.
10.4.7 Troubleshooting
N/A
l It is recommended that both the UMTS-to-LTE PS redirection and handover if most UEs
support the UMTS-to-LTE PS handover. In this case, the UEs supporting handovers will
use the UMTS-to-LTE PS handover and the UEs not supporting handovers will use the
UMTS-to-LTE PS redirection.
l The UMTS-to-LTE PS redirection if operators do not configure neighboring LTE cells.
NOTE
To enable the UMTS-to-LTE PS handover, you need to first configure the neighboring LTE cell.
If UEs preferentially camp on the UMTS network, the feature WRFD-020129 Service-Based
PS Service Redirection from UMTS to LTE or WRFD-140218 Service-Based PS Handover
from UMTS to LTE is recommended. Otherwise, UEs can only be shifted to the LTE network
using the following methods, which leads to an idle LTE network:
l Cell reselection or coverage based PS redirection or handover from UMTS to LTE in
weak UMTS coverage areas.
l Load based PS redirection or handover from UMTS to LTE when the UMTS cell is with
high load.
LDR is required. It is recommended that this feature be used together with the LOFD-070203
RIM Based LTE Target Cell Selection feature, which helps select lightly loaded LTE cells
during redirections or handovers.
10.5.3 Planning
None
10.5.4 Deployment
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the SET LICENSE command. If the FeatureResAssignMode
parameter in this command is set to AutoAssign, the licensed values are automatically
allocated among the primary and secondary operators. If the FeatureResAssignMode
parameter in this command is set to ManualAssign, you also need to specify the related
license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The UE must support 3GPP Release 8 or later.
– The CN must support UMTS-to-LTE PS redirections.
– To support the cell load-based LTE cell selection function, when RIM messages are
exchanged using the CN, the MME and SGSN must support the RIM procedure,
through which LTE cell load information is transmitted. When RIM messages are
exchanged using Huawei eCoordinator, the eCoordinator must be deployed, and the
eNodeB and RNC must be connected to the same eCoordinator so that the eNodeB,
RNC, and eCoordinator support the RIM procedure, through which LTE cell load
information is transmitted.
– The SGSN must be able to send information about whether a UE has subscribed to
LTE services in the RAB ASSIGNMENT REQUEST message to the RNC. If the
SGSN does not support this function, UEs who have not subscribed to LTE services
will be handed over or redirected to LTE networks, causing service drops.
l Dependencies on other features
The function of selecting LTE cells based on LTE load requires the LOFD-070203 RIM
Based LTE Target Cell Selection feature.
l Dependencies on hardware
None
Data Preparation
Table 10-14 lists the data to be prepared for deploying Service-Based PS Service Redirection
from UMTS to LTE.
Penalty Time for Service- U2lServMcTimeO Set this Radio network plan
based U2L Meas Expiry utPunishTime(BS parameter to 90 (internal)
C6900,BSC6910) seconds to
prevent
frequent
entering and
exiting of the
compressed
mode during
service/load/
coverage-based
UMTS-to-LTE
redirections or
handovers if no
suitable LTE
cell is found
after LTE
signal quality
measurement is
complete.
Table 10-15 lists the parameter to be set to enable exchange of RIM messages through the
eCoordinator.
Precautions
In a GSM/UMTS/LTE hybrid network, do not set Inter-RAT PS Handover Switch
(PSServiceHOSwitch(BSC6900,BSC6910)) to ON after this feature is enabled. Otherwise,
the RNC sends the GSM-specific measurement control message to the UE first. As a result,
the UE will be redirected or handed over to GSM.
If load-based LTE-to-UMTS related features are deployed on the LTE network, ping-pong
handovers or redirections may occur between UMTS and LTE. For details about load-based
LTE-to-UMTS related features deployed on the LTE network, see MLB Feature Parameter
Description for eRAN.
To select LTE cells based on LTE cell load, the RNC needs to obtain LTE cell load
information from the eNodeB through the RIM procedure. The eNodeB is the receiving party
of the first RIM message, so the related features on the LTE side must be enabled first.
Otherwise, the eNodeB cannot respond to the RNC with LTE cell load information, and the
RIM procedure cannot be completed. For the related features on the LTE side, see Inter-RAT
Mobility Management in Connected Mode Feature Parameter Description for eRAN.
In high speed scenarios, such as high-speed railways, the best cell frequently changes and
measurements are frequently triggered. In this case, network performance deteriorates and the
call drop rate increases. Therefore, set Best Cell Change Triggered LTE Measure Switch
(BestCellTrigLTEMeasSwitch(BSC6900,BSC6910)) to ON.
– You can run the MOD ULTECELL command in sub-step 1 if an LTE cell has been
configured.
– Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a
group that includes operators of LTE cells. If the group includes only operators of UMTS cells,
UMTS-to-LTE handovers will fail.
– If the group includes only operators of UMTS cells, the UMTS-to-LTE handovers will fail. If
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH in the LST
UCORRMALGOSWITCH command is not selected, the RNC uses neighboring-LTE-cell-
based redirection. The service-, coverage-, and load-based UMTS-to-LTE PS redirection or
handover features share the HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH
switch.
2. If a neighboring LTE cell or blind neighboring LTE cell has not been configured, run the
RNC MML command ADD ULTENCELL to configure a neighboring LTE cell. To
configure a blind neighboring LTE cell, set Blind HO Neighboring Cell Flag to TRUE.
NOTE
You can run the MOD ULTENCELL command instead of the ADD ULTENCELL command in sub-
step 2 if a neighboring LTE cell has been configured.
l (Optional) If a non-neighboring-LTE-cell-based redirection is allowed, the LTE
frequency needs to be configured. The procedure is as follows: Run the RNC MML
command ADD UCELLNFREQPRIOINFO to add information about the priorities of
frequencies for neighboring LTE cells of the UMTS cell.
NOTE
Among the preceding two modes, the neighboring-LTE-cell-based redirection is preferred. When
neighboring cells are not planned or no neighboring LTE cell is configured, the non-neighboring-
LTE-cell-based redirection is recommended, which can reduce the workload in deploying the
network.
Step 2 (Optional) To turn on the U2L connected mode priority switch, run the RNC MML command
SET UCORRMALGOSWITCH and select HO_U2L_CONN_PRIO_SWITCH under
HandOver Switch1. In addition, run the RNC MML command MOD
UCELLNFREQPRIOINFO and set the connected mode priorities of LTE frequencies.
Step 3 Run the RNC MML command SET UU2LTEHONCOV. In this step, set the RNC-level
parameters related to measurements for the service-based UMTS-to-LTE redirections. These
parameters are listed in Table 10-14. The RNC sends the parameter settings to the UE through
a measurement control message.
Step 4 (Optional) Run the RNC MML command ADD UCELLU2LTEHONCOV to set parameters
related to measurements for the service-based UMTS-to-LTE redirections for a specific cell.
These parameters are listed in Table 10-14.
NOTE
If measurement algorithm parameters have been configured for a cell, run the MOD
UCELLU2LTEHONCOV command in step 3 to modify the configuration.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level parameters are unavailable, the cell uses the
RNC-level parameters.
Step 5 Run the RNC MML command MOD UTYPRABBASIC to modify the basic information
about a typical RAB. In this step, set Service-Based Handover to LTE Allowed to
HO_TO_EUTRAN_SHOULD_BE_PERFORM to allow UMTS-to-LTE PS redirections or
blind redirections.
Step 6 Run the RNC MML command SET UCORRMALGOSWITCH to enable service-based
UMTS-to-LTE PS redirections or blind redirections. In this step, select
HO_LTE_PS_OUT_SWITCH and HO_LTE_SERVICE_PS_OUT_SWITCH under the
HandOver Switch parameter.
Step 7 For UMTS cells in which the LTE coverage is good, enable service-based UMTS-to-LTE PS
redirection by running the RNC MML command ADD UCELLU2LTEHONCOV with
HO_LTE_SERVICE_PS_OUT_SWITCH selected under the Service-based U2L
Algorithm Switch parameter. For UMTS cells in which there is no or weak LTE coverage, do
not enable service-based UMTS-to-LTE PS redirection.
Step 8 Run the RNC MML command SET UU2LTEHONCOV (RNC-level) or ADD
UCELLU2LTEHONCOV (cell-level) with U2L_SERV_LOWACTIVE_TRIGGER
selected and other items under the Trigger Source for Service-based U2L HO/Redir
parameter cleared.
Step 9 Run the RNC MML command ADD UCELLCMUSERNUM with PS CM User No. Thld
for Non-coverage-based U2L set to 20.
Step 10 (Optional) To enable the non-neighboring-LTE-cell-based redirection, run the RNC MML
command SET UCORRMALGOSWITCH. In this step, select
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the HandOver Switch1
parameter.
NOTE
Step 11 (Optional) It is recommended that the UMTS-to-LTE blind redirection function be enabled
when LTE and UMTS cells provide overlapped coverage.
l If none of the terminals in the cell supports the measurement, run the RNC MML
command MOD UCELLHOCOMM with U2L Blind Redirect Switch set to ON to
turn on the blind redirection switch.
l If some terminals in the cell support the measurement, after turning on the blind
redirection switch, you also need to run the RNC MML command ADD
UCELLU2LTEHONCOV with HO_LTE_SERVICE_BLIND_FIRST_SWITCH
selected under Service-based U2L Algorithm Switch so that the blind redirection
function is implemented preferentially.
Step 12 (Optional) To avoid pingpong redirections, run the RNC MML command SET UHOCOMM
with U2L Blind Redir Anti-Pingpong Timer set to an appropriate value to so that a penalty
timer is started for UEs that attempt to access the UMTS network again within 30 seconds
after shifting from UMTS to LTE through blind redirections.
Step 13 (Optional) Run the RNC MML command SET UU2LTEHONCOV (RNC level) or MOD
UCELLU2LTEHONCOV (cell level) with Best Cell Change Triggered LTE Measure
Switch set to OFF.
Step 14 Run the SET UU2LTEHONCOV command and set the U2L Penalty Timer parameter to 20
and the U2L Punish Switch parameter to ON to prevent UEs from initiating service-based
UMTS-to-LTE redirections or handovers immediately after finishing LTE-to-UMTS
redirections or handovers.
Step 15 (Optional) Clear PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SWITCH under the
Performance Enhancement Switch 2 parameter in the SET UCORRMPARA command to
prevent frequent entering and exiting of the compressed mode during service-based UMTS-
to-LTE redirections or handovers due to frequent RB reconfiguration. Note that after this step
is performed, service-based UMTS-to-LTE redirections or handovers will not be triggered in
time.
Step 16 (Optional) Set the Penalty Time for Service-based U2L Meas Expiry parameter in the SET
UU2LTEHONCOV command to 90 seconds to prevent continual entering and exiting of the
compressed mode during service/load/coverage-based UMTS-to-LTE redirections or
handovers if no suitable LTE cell is found after LTE signal quality measurement is complete.
Step 17 Clear PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITCH under the Performance
Enhancement Switch 2 parameter in the SET UCORRMPARA command to prevent ping-
pong UMTS-to-LTE redirections or handovers that occur in PS-specific P2D state transitions
triggered by CS services.
Step 18 Run the MML command SET UCORRMPARA with the
PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING check box selected under
Performance Enhancement Switch 5 to prohibit UMTS-to-LTE redirections or handovers of
UEs when the UEs are performing CS paging procedures.
Step 19 (Optional) If the DC-HSDPA feature is enabled, run the RNC MML command SET UCMCF
with MC-HSDPA and LTE CM Coexist Indicator set to TRUE.
Step 20 (Optional) If EHSPACMPermissionInd(BSC6900,BSC6910),
HsdpaCMPermissionInd(BSC6900,BSC6910), or
McHsdpaLteCMPermissionInd(BSC6900,BSC6910) is set to FALSE, run the RNC MML
command SET UCORRMALGOSWITCH with the
PS_CMACTIVE_PROCESS_OPT_SWITCH check box under PS Rate Negotiation
Switch selected.
Step 21 (Optional) To enable the load-based LTE cell selection function, perform the following
operations:
1. (Optional) When RIM messages are exchanged through the CN and the UMTS and LTE
cells belong to different PLMNs, run the RNC MML command LST UCNOPERATOR
to query the value of Cn Operator Index and configure a CN route for the UMTS-to-
LTE RIM procedure according to the query result. Then run the RNC MML command
MOD ULTECELL, with CN Operator Index for Routing in U2L RIM set to the
queried index of the local operator.
2. Run the RNC MML command SET URRCTRLSWITCH. In this step, select
INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH under the Process Control
Switch 5 parameter.
3. (Optional) When RIM messages are exchanged using the eCoordinator:
– Run the RNC MML command SET URRCTRLSWITCH. In this step, select
RIM_ON_ECO_SWITCH under the Process Control Switch 5 parameter.
– Run the MML command SET ECOMMONCTRL on the eCoordinator. In this
step, select RIM_SWITCH under the Process Control Switch parameter.
4. Run the RNC MML command ADD UCELLHOCOMM or MOD
UCELLHOCOMM. In this step, select
SERVICE_BASE_U2L_LTE_LOAD_SWITCH under the SW Consider LTE Load
in U2L Interoperation parameter.
Step 22 If the extended LTE frequency bands (26 to 31) are supported, run the RNC MML command
SET UCORRMALGOSWITCH with HO_MC_EXT_LTE_BAND_SWITCH under the
HandOver Switch2 parameter selected.
Step 23 (Optional) In LTE and UMTS co-coverage scenarios, you can enable periodic RSCP
measurement-based UMTS-to-LTE redirection or handover by performing the following
operations:
1. Run the RNC MML command ADD UCELLU2LTEHONCOV with
HO_LTE_SERVICE_NEED_RSCP_SWITCH selected under Service-based U2L
Algorithm Switch.
2. Run the RNC MML command ADD UCELLU2LTEHONCOV with RSCP Threshold
for Non-coverage-based U2L set to -90.
3. Run the RNC MML command SET UU2LTEHONCOV with RSCP Measure Timer
for Non-coverage-based U2L set to D20000.
Step 24 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_11_BIT27 under Reserved Switch 11 selected to allow service-
based UMTS-to-LTE redirections or handovers only for LTE subscribers.
----End
//(Optional) Turning on the switch for allowing only LTE subscribers to perform
service-based U2L handover or redirection when the CN cannot obtain LTE
subscription information from UEs
SET UALGORSVPARA: RsvSwitch11=RESERVED_SWITCH_11_BIT27-1;
NOTE
When configuring the WRFD-020129 Service-Based PS Service Redirection from UMTS to LTE
feature on the CME, perform a single configuration first, and then perform a batch modification if
required. Configure the parameters of a single object before a batch modification. Perform a batch
modification before logging out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Tracking TAC(BSC69
Area Code 00,BSC6910
)
Operator CnOpGrpIn
Group Index dex(BSC690
0,BSC6910)
LTE CellPHYID(
Physical BSC6900,B
Cell Identity SC6910)
Blind HO BlindFlag(B
Neighboring SC6900,BS
Cell Flag C6910)
Layer 3 U2LTEFilte
Filter rCoef(BSC6
Coefficient 900,BSC691
for LTE 0)
Measuremen
t
LTE U2LTEMea
Measuremen sTime(BSC6
t Timer 900,BSC691
Length 0)
Measuremen LTEMeasQ
t Quantity uanOf3C(B
for Event 3C SC6900,BS
Measuremen C6910)
t of LTE
3C Hystfor3C(
Hysteresis BSC6900,B
SC6910)
Time to TrigTime3
Trigger C(BSC6900,
Event 3C BSC6910)
RSRP TargetRatTh
Threshold dRSRP(BSC
During PS 6900,BSC69
Handover to 10)
LTE
RSRQ TargetRatTh
Threshold dRSRQ(BS
During PS C6900,BSC
Handover to 6910)
LTE
Method 2:
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: CME Management > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance
Activation Observation
After this feature is enabled, observe the values of the following counters:
l VS.U2LTEHO.RRCRelease.Service(BSC6900,BSC6910)
This counter provides the number of service-based UMTS-to-LTE PS redirections for a
cell. If the value of this counter is not 0, the service-based UMTS-to-LTE PS redirection
algorithm takes effect.
After Best Cell Change Triggered LTE Measure Switch is set to ON, the value of this
counter increases. It indicates that the service-based UMTS-to-LTE PS redirection
algorithm triggered by the changed best cell takes effect.
l VS.U2LTEHO.RRCRelease.Sevice.Blind(BSC6900,BSC6910)
This counter provides the number of service-based UMTS-to-LTE PS blind redirections
for a cell. If the value of this counter is not 0, the service-based UMTS-to-LTE PS blind
redirection algorithm takes effect.
----End
When configuring the WRFD-020129 Service-Based PS Service Redirection from UMTS to LTE
feature on the CME, perform a single configuration first, and then perform a batch modification if
required. Configure the parameters of a single object before a batch modification. Perform a batch
modification before logging out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
When RIM messages are exchanged using the eCoordinator, RNC-level counters related to
the load-based LTE cell selection function are as follows.
These counters specify the number of requests sent by the RNC to obtain LTE load
information through RIM procedures, the number of successful procedures for obtaining load
information, and the number of LTE cell load updates.
10.5.7 Troubleshooting
N/A
10.6.3 Planning
None
10.6.4 Deployment
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The UE supports 3GPP Release 8 or later.
– The CN must support UMTS-to-LTE PS redirections.
– To support the cell load-based LTE cell selection function when RIM messages are
exchanged using the CN, the MME and SGSN must support the RIM procedure,
through which LTE cell load information is transmitted. When RIM messages are
exchanged using Huawei eCoordinator, the eCoordinator must be deployed and the
eNodeB and RNC must be connected to the same eCoordinator so that the eNodeB,
RNC, and eCoordinator support the RIM procedure, through which LTE cell load
information is transmitted. The SGSN supports 3GPP Release 8 or later and
UMTS-to-LTE PS handovers.
Data Preparation
Table 10-19 lists the data to prepare before activating Service-Based PS Handover from
UMTS to LTE.
Table 10-19 Data to prepare before activating Service-Based PS Handover from UMTS to
LTE
are advised
to deselect
PERFENH_
CS_P2D_T
RIG_SERV
ICE_U2L_S
WITCH
under this
parameter.
Penalty Time for Service- U2lServMcTime Set this Radio network plan
based U2L Meas Expiry OutPunishTime( parameter to 90 (internal)
BSC6900,BSC69 seconds to
10) prevent
continual
entering and
exiting of the
compressed
mode during
service/load/
coverage-based
UMTS-to-LTE
redirections or
handovers if no
suitable LTE
cell is found
after LTE signal
quality
measurement is
complete.
PS Rate Negotiation Switch PsSwitch(BSC69 You are advised Radio network plan
00,BSC6910) to select the (internal)
PS_CMACTIV
E_PROCESS_
OPT_SWITCH
check box under
this parameter
when
HsdpaCMPerm
issionInd(BSC6
900,BSC6910),
EHSPACMPer
missionInd(BS
C6900,BSC691
0), or
McHsdpaLteC
MPermissionIn
d(BSC6900,BS
C6910) is set to
FALSE. After
this parameter is
set to ON, the
call drop rate is
reduced, but
user experience
of PS services is
affected.
RSCP Threshold for Non- U2LNCovRscpTh The value -90 is Default value/
coverage-based U2L d(BSC6900,BSC6 recommended. Recommended
910) value
Table 10-20 lists the parameter to be set to enable exchange of RIM messages through the
eCoordinator.
Precautions
In a GSM/UMTS/LTE hybrid network, you are not advised to set Inter-RAT PS Handover
Switch (PSServiceHOSwitch(BSC6900,BSC6910)) to ON. Otherwise, the RNC sends the
GSM-specific measurement control message to the UE first after this feature is enabled. As a
result, the UE will be redirected or handed over to GSM.
If load-based LTE-to-UMTS related features are deployed on the LTE network, ping-pong
handover or redirection may occur between UMTS and LTE. For details about load-based
LTE-to-UMTS related features deployed on the LTE network, see MLB Feature Parameter
Description for eRAN.
To select LTE cells based on LTE cell load, the RNC needs to obtain LTE cell load
information from the eNodeB through the RIM procedure. The eNodeB is the receiving party
of the first RIM message. Therefore, the related feature on the LTE side must be enabled first.
Otherwise, the eNodeB cannot respond to the RNC with LTE cell load information, and the
RIM procedure will be terminated before it is complete. For the related feature on the LTE
side, see Inter-RAT Mobility Management in Connected Mode Feature Parameter Description
for eRAN.
In high speed scenarios, such as high-speed railways, the best cell frequently changes and
measurements are frequently triggered. In this case, network performance deteriorates and the
call drop rate increases. Therefore, you are not advised to set Best Cell Change Triggered
LTE Measure Switch (BestCellTrigLTEMeasSwitch(BSC6900,BSC6910)) to ON.
You can run the MOD ULTECELL command to modify the configuration if an LTE cell has been
configured. Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a
group that includes operators of LTE cells. If the group includes only operators of UMTS cells, UMTS-
to-LTE handovers will fail.
Step 2 If a neighboring LTE cell has not been configured, run the RNC MML command ADD
ULTENCELL to configure a neighboring LTE cell.
Step 3 (Optional) To turn on the U2L connected mode priority switch, run the RNC MML command
SET UCORRMALGOSWITCH and select HO_U2L_CONN_PRIO_SWITCH under
HandOver Switch1. Run the RNC MML command MOD UCELLNFREQPRIOINFO and
set the connected mode priorities of LTE frequencies.
Step 4 Run the RNC MML command SET UU2LTEHONCOV. In this step, set the RNC-level
parameters related to measurements for service-based UMTS-to-LTE handovers. These
parameters are listed in Table 10-19. The RNC sends the parameter settings to the UE through
a measurement control message.
Step 5 (Optional) If parameters related to the measurement algorithm for a cell need to be
independently set, run the RNC MML command ADD UCELLU2LTEHONCOV to set cell-
level parameters related to the service-based UMTS-to-LTE measurement algorithm based on
Table 10-19.
NOTE
If a cell has been configured with parameters related to the measurement algorithm, run the MOD
UCELLU2LTEHONCOV command in step 3 to modify the configuration.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level measurement-related parameters are
unavailable, the cell uses the RNC-level measurement-related parameters.
Step 6 Run the RNC MML command MOD UTYPRABBASIC with Service-Based Handover to
LTE Allowed set to HO_TO_EUTRAN_SHOULD_BE_PERFORM to allow UMTS-to
LTE PS handover.
Step 7 Run the RNC MML command SET UCORRMALGOSWITCH with
HO_LTE_PS_OUT_SWITCH and HO_LTE_SERVICE_PSHO_OUT_SWITCH under
HandOver Switch selected to enable service-based UMTS-to-LTE PS handover.
Step 8 Turn on the blind redirection switch. For details, see 4.3.2.5 Decision and Execution and
4.3.3.8 Blind PS Redirection Preferred During a Service-Based UMTS-to-LTE PS
Redirection.
Step 9 For UMTS cells in which the LTE coverage is good, enable service-based UMTS-to-LTE PS
redirection by running the RNC MML command ADD UCELLU2LTEHONCOV with
HO_LTE_SERVICE_PSHO_OUT_SWITCH selected under the Service-based U2L
Algorithm Switch parameter. For UMTS cells in which there is no or weak LTE coverage, do
not enable service-based UMTS-to-LTE PS redirection.
Step 10 Run the RNC MML command SET UU2LTEHONCOV (RNC-level) or ADD
UCELLU2LTEHONCOV (cell-level) with U2L_SERV_LOWACTIVE_TRIGGER
selected and other options deselected under the Trigger Source for Service-based U2L HO/
Redir parameter to set the trigger cause of service-based UMTS-to-LTE PS redirections.
Step 11 Run the RNC MML command ADD UCELLCMUSERNUM with PS CM User No. Thld
for Non-coverage-based U2L set to 20.
Step 12 Run the RNC MML command SET UCORRMALGOSWITCH to disable non-neighboring-
cell-based redirection. In this step, clear
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under the HandOver Switch1
parameter.
Step 13 (Optional) Run the RNC MML command SET UU2LTEHONCOV (RNC-level) or MOD
UCELLU2LTEHONCOV (cell-level) with Best Cell Change Triggered LTE Measure
Switch set to OFF.
Step 14 Run the RNC MML command SET UU2LTEHONCOV and set the U2L Penalty Timer
parameter to 20 and the U2L Punish Switch parameter to ON to prevent UEs from initiating
service-based UMTS-to-LTE redirections or handovers immediately after finishing LTE-to-
UMTS redirections or handovers.
Step 15 (Optional) Deselect PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SWITCH under the
Performance Enhancement Switch 2 parameter in the RNC MML command SET
UCORRMPARA to prevent continual entering and exiting of the compressed mode during
service-based UMTS-to-LTE redirections or handovers due to frequent RB reconfiguration.
Step 16 (Optional) Set the Penalty Time for Service-based U2L Meas Expiry parameter in the RNC
MML command SET UU2LTEHONCOV to 90 seconds to prevent continual entering and
exiting of the compressed mode during service/load/coverage-based UMTS-to-LTE
redirections or handovers if no suitable LTE cell is found after LTE signal quality
measurement is complete.
Step 17 (Optional) Run the RNC MML command SET UU2LTEHONCOV to enable the function of
preventing frequent retries after a UMTS-to-LTE PS handover failure. In this step, set Thd
for No-Cov U2L HO Fail by Phy CH Fail and Inter-RAT HO Physical Channel Failure
Penalty Timer to appropriate values.
Step 18 Deselect PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITCH under the Performance
Enhancement Switch 2 parameter in the RNC MML command SET UCORRMPARA to
When the direct tunnel function is not enabled on the RNC, only the routes and UP data channels
between the LTE S-GW and SGSN need to be configured on the CN side.
Step 26 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_11_BIT27 under Reserved Switch 11 selected to allow service-
based UMTS-to-LTE redirections or handovers only for LTE subscribers.
----End
ER-0&U2L_SERV_OTHER_TRIGGER-0;
//Setting the maximum number of UEs that can perform measurement in compressed
mode simultaneously
ADD UCELLCMUSERNUM: CellId=1, U2LNCovPSCmUserNumThd=20;
//Disabling non-neighboring-LTE-cell-based redirections
SET UCORRMALGOSWITCH: HoSwitch1=HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH-0;
//Turning on the blind redirection switch
MOD UCELLHOCOMM: CellId=2, U2LBlindRedirSwitch=ON;
//Turning off the RNC-level service-based LTE measurement switch triggered by the
changed best cell
SET UU2LTEHONCOV: BestCellTrigLTEMeasSwitch=OFF;
//Turning off the cell-level service-based LTE measurement switch triggered by
the changed best cell
MOD UCELLU2LTEHONCOV: CellId=2, BestCellTrigLTEMeasSwitch=OFF;
//Turning on the U2L Punish Switch
SET UU2LTEHONCOV: U2LPunishTimer=20, U2LPunishSwitch=ON;
//Turning off the RESERVED_SWITCH_6_BIT13
SET UCORRMPARA: PerfEnhanceSwitch2=PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SWITCH-0;
//Enabling the function of preventing frequent retries after a UMTS-to-LTE PS
handover failure
SET UU2LTEHONCOV: U2LPhyChFailNum=3, PenaltyTimeForPhyChFail=30;
//Setting the penalty time to 90s by setting bits 16 through 31 of the Reserved
U32 Parameter 9 parameter
SET UU2LTEHONCOV: U2lServMcTimeOutPunishTime=90;
//Prohibiting UMTS-to-LTE redirection or handover from being triggered by a PCH-
to-DCH channel switch when a CS service is set up
SET UCORRMPARA: PerfEnhanceSwitch2=PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITCH-0;
//Prohibiting UEs from attempting U2L redirection or handover when they are
performing CS paging procedures
SET UCORRMPARA:PerfEnhanceSwitch5=PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING-1;
//Enabling the function of preventing the service rate increase in compressed mode
SET UCORRMALGOSWITCH: PsSwitch=PS_CMACTIVE_PROCESS_OPT_SWITCH-1;
//Enabling the function of allowing DC-HSDPA UEs to support measurement of LTE
cells in compressed mode
SET UCMCF:McHsdpaLteCMPermissionInd=TRUE;
//Enabling the cell load-based LTE cell selection function
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged using the CN
MOD ULTECELL: LTECellIndex=1,U2LRimCNOperatorRTIndex=1;
SET URRCTRLSWITCH: ProcessSwitch5=INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH-1;
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged using the eCoordinator
SET URRCTRLSWITCH: ProcessSwitch5=RIM_ON_ECO_SWITCH-1;
MOD UCELLHOCOMM: CellId=2, U2LLTELoadSwitch=SERVICE_BASE_U2L_LTE_LOAD_SWITCH-1;
//Enabling the RIM procedure on the eCoordinator when RIM messages are exchanged
using the eCoordinator
SET ECOMMONCTRL: ProcessSwitch=RIM_SWITCH-1;
//Enabling interoperability between UMTS frequency bands and LTE extended
frequency bands 26 to 31 when the LTE system supports these extended frequency
bands
SET UCORRMALGOSWITCH: HoSwitch2=HO_MC_EXT_LTE_BAND_SWITCH-1;
//Setting parameters for the algorithm of service-based UMTS-to-LTE redirections
or handovers based on RSCP measurement
ADD UCELLU2LTEHONCOV: CellId=1,
U2LServAlgoSwitch=HO_LTE_SERVICE_NEED_RSCP_SWITCH-1, U2LNCovRscpThd=-90;
SET UU2LTEHONCOV: U2LNCovRscpPrdTimer=D2000;
NOTE
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Mobile MCC(BSC6
Country 900,BSC691
Code 0)
Mobile MNC(BSC6
Network 900,BSC691
Code 0)
Tracking TAC(BSC69
Area Code 00,BSC6910
)
Operator CnOpGrpIn
Group Index dex(BSC690
0,BSC6910)
LTE CellPHYID(
Physical BSC6900,B
Cell Identity SC6910)
Layer 3 U2LTEFilte
Filter rCoef(BSC6
Coefficient 900,BSC691
for LTE 0)
Measuremen
t
LTE U2LTEMea
Measuremen sTime(BSC6
t Timer 900,BSC691
Length 0)
Measuremen LTEMeasQ
t Quantity uanOf3C(B
for Event 3C SC6900,BS
Measuremen C6910)
t of LTE
3C Hystfor3C(
Hysteresis BSC6900,B
SC6910)
Time to TrigTime3
Trigger C(BSC6900,
Event 3C BSC6910)
RSRP TargetRatTh
Threshold dRSRP(BSC
During PS 6900,BSC69
Handover to 10)
LTE
RSRQ TargetRatTh
Threshold dRSRQ(BS
During PS C6900,BSC
Handover to 6910)
LTE
Inter-RAT PenaltyTime
HO Physical ForPhyChF
Channel ail(BSC690
Failure 0,BSC6910)
Penalty
Timer
Method 2:
This feature can be activated in batches on the CME. For detailed operations, see the
following section in the CME product documentation or online help: Managing the CME >
CME Guidelines > Enhanced Feature Management > Feature Operation and
Maintenance.
Activation Observation
After enabling this feature, observe the value of the
VS.U2LTEHO.AttRelocPrepOutPS.Service(UMTS BSC6900,UMTS BSC6910) counter.
This counter provides the number of attempts for service-based UMTS-to-LTE PS handovers
for a cell. If the counter value is not 0, the feature has taken effect.
----End
When configuring WRFD-140218 Service-Based PS Handover from UMTS to LTE on the CME,
perform a single configuration first, and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Cell-level counters related to handover failures are the same as those used for coverage-based
UMTS to LTE handovers. For specific counters, see 10.4.5 Performance Monitoring.
Counters related to neighboring cells of failed handovers are the same as those used for
coverage-based UMTS-to-LTE handovers. For specific counters, see 10.4.5 Performance
Monitoring.
When RIM messages are exchanged using the CN, the additional counters to be monitored are
the same as those to be monitored for service-based UMTS-to-LTE PS redirections. For
details, see 10.5.5 Performance Monitoring.
When RIM messages are exchanged using the eCoordinator, the additional counters to be
monitored are the same as those to be monitored for service-based UMTS-to-LTE PS
redirections. For details, see 10.5.5 Performance Monitoring.
l If VS.U2LTEHO.FailOutPS.CfgUnSupp(BSC6900,BSC6910),
VS.U2LTEHO.FailOutPS.PhyChFail(BSC6900,BSC6910), and
VS.U2LTEHO.FailRelocPrepOutPS.ReloUnSupp(BSC6900,BSC6910) have large
values, there is a possibility that some types of UEs do not support UMTS-to-LTE PS
handovers.
l When this happens, modify the parameter settings to enable more UEs to perform
UMTS-to-LTE PS redirections in this cell. If
VS.U2LTEHO.FailOutPS.NoReply(BSC6900,BSC6910) has a large value, raise the
value of TargetRatThdRSRP(BSC6900,BSC6910) or
TargetRatThdRSRQ(BSC6900,BSC6910).
l If VS.U2LTEHO.FailRelocPrepOutPS.NoResAvail(BSC6900,BSC6910) and
VS.U2LTEHO.FailRelocPrepOutPS.TgtHighLoad(BSC6900,BSC6910) have large
values, the LTE network traffic load is high. When this happens, enable the cell load-
based LTE cell selection function to avoid unnecessary handover preparations, which
helps ensure a high success rate for UMTS-to-LTE PS handover preparations. Or you
can take measures to lower the LTE network traffic load so that a high UMTS-to-LTE PS
handover preparation success rate is ensured.
10.6.7 Troubleshooting
N/A
LDR is required. It is recommended that this feature be used together with the LOFD-070203
RIM Based LTE Target Cell Selection feature, which helps select lightly loaded LTE cells
during redirections or handovers.
NOTE
If the LDR switch (UL_UU_LDR/DL_UU_LDR) is turned on, a UMTS cell is regarded as heavily
loaded when the UMTS cell load still exceeds the LDR triggering threshold
(UlLdrTrigThd(BSC6900,BSC6910)/DlLdrTrigThd(BSC6900,BSC6910)) after LDR actions such as
BE service rate reduction and inter-frequency load-based handovers are performed.
l Traffic volume and distribution of hot spots on the UMTS network and LTE network
l Proportion of UMTS/LTE dual-mode UEs to total UEs
NOTE
The proportion of UMTS/LTE multi-mode UEs on a network affects the gains brought by the feature.
That is, the feature has a more obvious effect on inter-RAT load balancing when the proportion of
UMTS/LTE multi-mode UEs is high. However, it is hard to specify a proportion of UMTS/LTE multi-
mode UEs for deploying the feature, which depends on the specific network conditions and the
operator's policy.
10.7.3 Planning
None
10.7.4 Deployment
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The CN supports 3GPP Release 8.
– To support the cell load-based LTE cell selection function, when RIM messages are
exchanged using the CN, the MME and SGSN must support the RIM procedure,
through which LTE cell load information is transmitted; when RIM messages are
exchanged using Huawei eCoordinator, the eCoordinator must be deployed and the
eNodeB and RNC must be connected to the same eCoordinator so that the eNodeB,
RNC, and eCoordinator support the RIM procedure, through which LTE cell load
information is transmitted.
– The UE supports 3GPP Release 8 and is a UMTS/LTE multi-mode terminal.
l Dependencies on other features
The function of selecting LTE cells based on LTE load requires the LOFD-070203 RIM
Based LTE Target Cell Selection feature.
l Dependencies on hardware
– None
Data Preparation
Table 10-24 lists the data to be prepared before activating Service-Based PS Service
Redirection from UMTS to LTE.
Table 10-24 Data to be prepared before activating Load Based PS Redirection from UMTS to
LTE
Parameter Parameter ID Setting Notes Data Source
Name
LDR code priority LdrCodePriUseInd(B Set this parameter to Radio network plan
indicator SC6900,BSC6910) the default value. (internal)
Max user number MaxUserNumCodeAd Set this parameter to Radio network plan
of code adjust j(BSC6900,BSC6910) the default value. (internal)
Gold user load GoldUserLoadCon- Set this parameter to Radio network plan
control switch trolSwitch(BSC6900, the default value. (internal)
BSC6910)
Table 10-25 lists the data to be prepared before activating exchange of RIM messages through
the eCoordinator.
Table 10-25 Data to be prepared before activating exchange of RIM messages through the
eCoordinator
Parameter Name Parameter ID Setting Notes Data Source
Precautions
If load-based LTE-to-UMTS related features are deployed on the LTE network, ping-pong
handovers or redirections may occur between UMTS and LTE. For details about load-based
LTE-to-UMTS related features deployed on the LTE network, see MLB Feature Parameter
Description for eRAN. To prevent ping-pong handovers and redirections between UMTS and
LTE, it is recommended that this feature be enabled together with the function of selecting
LTE cells based on LTE cell load.
The eNodeB is the receiving party of the first RIM message, so the related feature on the LTE
side must be enabled first. Otherwise, the eNodeB cannot respond to the RNC with LTE cell
load information, and the RIM procedure cannot be completed. For the related feature on the
LTE side, see Inter-RAT Mobility Management in Connected Mode Feature Parameter
Description for eRAN.
NOTE
– You can run the MOD ULTECELL command in sub-step 1 if an LTE cell has been
configured.
– Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a
group that includes operators of LTE cells. If the group includes only operators of UMTS cells,
UMTS-to-LTE handovers will fail.
– If HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH in the LST
UCORRMALGOSWITCH command is turned off
(HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH-0), the RNC uses
neighboring-LTE-cell-based redirections or blind redirections. The service-, coverage-, and
load-based UMTS-to-LTE PS redirection or handover features share the
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH switch.
2. If a neighboring LTE cell or blind neighboring LTE cell has not been configured, run the
RNC MML command ADD ULTENCELL to configure a neighboring LTE cell. To
configure a blind neighboring LTE cell, set Blind HO Neighboring Cell Flag to TRUE.
NOTE
You can run the MOD ULTENCELL command in sub-step 2 if a neighboring LTE cell has been
configured.
l (Optional) If non-neighboring-cell-based redirection is required, add frequency priority
information of neighboring LTE cells for the UMTS cells by running the RNC MML
command ADD UCELLNFREQPRIOINFO.
Step 3 (Optional) To turn on the U2L connected mode priority switch, run the RNC MML command
SET UCORRMALGOSWITCH and select HO_U2L_CONN_PRIO_SWITCH under
HandOver Switch1. In addition, run the RNC MML command MOD
UCELLNFREQPRIOINFO to reconfigure the connected mode priorities of LTE
frequencies.
Step 4 In this step, set the RNC-level parameters related to measurements for load-based UMTS-to-
LTE handovers. These parameters are listed in Table 10-24. The RNC sends the parameter
settings to the UE through a measurement control message.
Step 5 (Optional) If parameters related to the measurement algorithm for a cell need to be
independently set, run the RNC MML command ADD UCELLU2LTEHONCOV to set cell-
level parameters related to the load-based UMTS-to-LTE measurement algorithm based on
Table 10-24.
NOTE
If measurement algorithm parameters have been configured for a cell, run the MOD
UCELLU2LTEHONCOV command in step 3 to modify the configuration.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level parameters are unavailable, the cell uses the
RNC-level parameters.
Step 6 Run the RNC MML command MOD UTYPRABBASIC to modify the basic information
about a typical RAB. In this step, set Service-Based Handover to LTE Allowed to
HO_TO_EUTRAN_SHOULD_BE_PERFORM to allow UMTS-to-LTE PS redirections or
blind redirections.
Step 7 Run the RNC MML command SET UCORRMALGOSWITCH. In this step, select
HO_LTE_PS_OUT_SWITCH under the HandOver Switch parameter to enable UMTS-to-
LTE interoperations for PS services.
Step 8 Run the RNC MML command ADD UCELLLDR. In this step, turn on the
PSInterU2LLDHO switch by referring to section 4.3.4.8 Suggestions for LDR Action
Configurations and set UL LDR UL PS Domain Load HO User No. and DL LDR UL PS
Domain Load HO User No. based on the network plan.
Step 10 (Optional) If the non-neighboring cell-based redirection function is required, run the RNC
MML command SET UCORRMALGOSWITCH with
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH and
HO_U2L_LOAD_PS_REDIRECT_SWITCH under HandOver Switch1 selected.
NOTE
Step 11 (Optional) For terminals that do not support LTE measurement, run the RNC MML command
MOD UCELLHOCOMM to enable blind redirection to LTE for a specific cell. In this step,
set U2L Blind Redirect Switch to ON.
Step 12 (Optional) To avoid pingpong redirections, run the RNC MML command SET UHOCOMM
with U2LBlindRedirPingpongTimer(BSC6900,BSC6910) set to an appropriate value to so
that a penalty timer is started for UEs that attempt to access the UMTS network again within
30 seconds after shifting from UMTS to LTE through blind redirections.
Step 13 (Optional) If the DC-HSDPA feature is enabled, run the RNC MML command SET UCMCF
with MC-HSDPA and LTE CM Coexist Indicator set to TRUE.
Step 15 (Optional) To enable the load-based LTE cell selection function, perform the following
operations:
1. (Optional) When RIM messages are exchanged using the CN and the UMTS and LTE
cells belong to different PLMNs, run the RNC MML command LST UCNOPERATOR
to query the value of Cn Operator Index and configure a CN route for the UMTS-to-
LTE RIM procedure according to the query result. Then run the RNC MML command
MOD ULTECELL, with CN Operator Index for Routing in U2L RIM set to the
queried index of the local operator.
2. Run the RNC MML command SET URRCTRLSWITCH. In this step, select
INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH under the Process Control
Switch 5 parameter.
3. (Optional) When RIM messages are exchanged using the eCoordinator:
– Run the RNC MML command SET URRCTRLSWITCH. In this step, select
RIM_ON_ECO_SWITCH(Support RIM by eCoordinator Switch) under the
Process Control Switch 5 parameter.
– Run the MML command SET ECOMMONCTRL on the eCoordinator. In this
step, select RIM_SWITCH(RIM Switch) under the Process Switch parameter.
----End
DlPSInterRatShouldBeHOUeNum=1, DlLdrAMRRateReductionRabNum=1,
DlCSInterRatShouldNotHOUeNum=3, DlPSInterRatShouldNotHOUeNum=1,
UlLdrFirstAction=BERateRed, UlLdrSecondAction=InterFreqLDHO,
UlLdrThirdAction=PSInterU2LLDHO, UlLdrFourthAction=NoAct, UlLdrFifthAction=NoAct,
UlLdrSixthAction=NoAct, UlLdrSeventhAction=NoAct, UlLdrEighthAction=NoAct, UlLdr
NinthAction=NoAct, UlLdrBERateReductionRabNum=1, UlLdrPsRTQosRenegRabNum=1,
UlPSU2LHOUeNum=1, UlCSInterRatShouldBeHOUeNum=3, UlPSInterRatShouldBeHOUeNum=1,
UlLdrAMRRateReductionRabNum=1, UlCSInterRatShouldNotHOUeNum=3,
UlPSInterRatShouldNotHOUeNum=1, UlInterFreqHoCellLoadSpaceThd=20,
DlInterFreqHoCellLoadSpaceThd=20, UlInterFreqHoBWThd=200000,
DlInterFreqHoBWThd=200000, MbmsDecPowerRabThd=1, CellLdrSfResThd=SF8,
LdrCodePriUseInd=TRUE, MaxUserNumCodeAdj=1, UlLdrCreditSfResThd=SF8,
DlLdrCreditSfResThd=SF8, LdrCodeUsedSpaceThd=13, CodeCongSelInterFreqHoInd=FALSE,
GoldUserLoadControlSwitch=OFF;
//Turning on the switch for non-neighboring-LTE-cell-based redirection
SET UCORRMALGOSWITCH: HoSwitch1=HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH-1;
//Turning on the blind redirection switch
MOD UCELLHOCOMM: CellId=1, U2LBlindRedirSwitch=ON;
//Enabling the function of preventing the service rate increase in compressed mode
SET UCORRMALGOSWITCH: PsSwitch=PS_CMACTIVE_PROCESS_OPT_SWITCH-1;
//Enabling DC-HSDPA UEs to support measurement of LTE cells in compressed mode
SET UCMCF:McHsdpaLteCMPermissionInd=TRUE;
//Setting the timer during which blind redirections to an LTE network are
prevented
SET UHOCOMM: U2LBlindRedirPingpongTimer=60;
//Enabling the cell load-based LTE cell selection function
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged through the CN
MOD ULTECELL: LTECellIndex=1, U2LRimCNOperatorRTIndex=1;
SET URRCTRLSWITCH: ProcessSwitch5=INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH-1;
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged through the eCoordinator
SET URRCTRLSWITCH: ProcessSwitch5=RIM_ON_ECO_SWITCH-1;
MOD UCELLHOCOMM: CellId=2, U2LLTELoadSwitch=LOAD_BASE_U2L_LTE_LOAD_SWITCH-1;
//Enabling the RIM procedure on the eCoordinator when RIM messages are exchanged
through the eCoordinator
SET ECOMMONCTRL: ProcessSwitch=RIM_SWITCH-1;
//Prohibiting UEs from attempting U2L redirection or handover when they are
performing CS paging procedures
SET UCORRMPARA: PerfEnhanceSwitch5=PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING-1;
//When the LTE system supports extended frequency bands (26 to 31)
SET UCORRMALGOSWITCH: HoSwitch2=HO_MC_EXT_LTE_BAND_SWITCH-1;
//Turning on the switch for allowing only LTE subscribers to perform load-based
U2L handover or redirection when the CN cannot obtain LTE subscription
information from UEs
SET UALGORSVPARA: RsvSwitch11=RESERVED_SWITCH_11_BIT28-1;
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Mobile MCC(BSC6
Country 900,BSC691
Code 0)
Mobile MNC(BSC6
Network 900,BSC691
Code 0)
Tracking TAC(BSC69
Area Code 00,BSC6910
)
Operator CnOpGrpIn
Group Index dex(BSC690
0,BSC6910)
LTE CellPHYID(
Physical BSC6900,B
Cell Identity SC6910)
Layer 3 U2LTEFilte
Filter rCoef(BSC6
Coefficient 900,BSC691
for LTE 0)
Measuremen
t
LTE U2LTEMea
Measuremen sTime(BSC6
t Timer 900,BSC691
Length 0)
Measuremen LTEMeasQ
t Quantity uanOf3C(B
for Event 3C SC6900,BS
Measuremen C6910)
t of LTE
3C Hystfor3C(
Hysteresis BSC6900,B
SC6910)
Time to TrigTime3
Trigger C(BSC6900,
Event 3C BSC6910)
RSRP TargetRatTh
Threshold dRSRP(BSC
During PS 6900,BSC69
Handover to 10)
LTE
RSRQ TargetRatTh
Threshold dRSRQ(BS
During PS C6900,BSC
Handover to 6910)
LTE
UL CS UlCSInterR
should be atShouldBe
HO user HOUeNum(
number BSC6900,B
SC6910)
UL PS UlPSInterR
should be atShouldBe
HO user HOUeNum(
number BSC6900,B
SC6910)
UL LDR- UlLdrAMR
AMR rate RateReducti
reduction onRabNum(
RAB BSC6900,B
number SC6910)
UL CS UlCSInterR
should not atShouldNot
be HO user HOUeNum(
number BSC6900,B
SC6910)
UL PS UlPSInterR
should not atShouldNot
be HO user HOUeNum(
number BSC6900,B
SC6910)
UL Inter- UlInterFreq
freq cell load HoCellLoad
handover SpaceThd(B
load space SC6900,BS
threshold C6910)
DL Inter- DlInterFreq
freq cell load HoCellLoad
handover SpaceThd(B
load space SC6900,BS
threshold C6910)
UL Inter- UlInterFreq
freq cell load HoBWThd(
handover BSC6900,B
maximum SC6910)
bandwidth
DL Inter- DlInterFreq
freq cell load HoBWThd(
handover BSC6900,B
maximum SC6910)
bandwidth
MBMS MbmsDecP
descend owerRabTh
power rab d(BSC6900,
threshold BSC6910)
Ul LDR UlLdrCredit
credit SF SfResThd(B
reserved SC6900,BS
threshold C6910)
Dl LDR DlLdrCredit
credit SF SfResThd(B
reserved SC6900,BS
threshold C6910)
InterFreq LdrCodeUse
HO code dSpaceThd(
used ratio BSC6900,B
space SC6910)
threshold
Code CodeCongS
congestion elInterFreq
select inter- HoInd(BSC
freq 6900,BSC69
indication 10)
Forbidden InterFreqLd
Traffic Class HoForbiden
for inter-freq TC(BSC690
HO 0,BSC6910)
Ul TTI HO UlTtiCredit
Credit SF SfResThd(B
reserved SC6900,BS
threshold C6910)
InterFreq InterFreqL
Load DHOMetho
Handover dSelection(
Method BSC6900,B
Selection SC6910)
Code CodeCongH
Congest oEnhanceIn
Neighbor d(BSC6900,
Select BSC6910)
Enhance
Switch
DL LDR-BE DlLdrBERa
rate teReduction
reduction RabNum(B
RAB SC6900,BS
number C6910)
DL CS DlCSInterR
should be atShouldBe
HO user HOUeNum(
number BSC6900,B
SC6910)
DL PS DlPSInterR
should be atShouldBe
HO user HOUeNum(
number BSC6900,B
SC6910)
DL LDR- DlLdrAMR
AMR rate RateReducti
reduction onRabNum(
RAB BSC6900,B
number SC6910)
DL CS DlCSInterR
should not atShouldNot
be HO user HOUeNum(
number BSC6900,B
SC6910)
DL PS DlPSInterR
should not atShouldNot
be HO user HOUeNum(
number BSC6900,B
SC6910)
DL LDR DlLdrFirstA
first action ction(BSC6
900,BSC691
0)
DL LDR DlLdrSecon
second dAction(BS
action C6900,BSC
6910)
DL LDR DlLdrThird
third action Action(BSC
6900,BSC69
10)
DL LDR DlLdrFourt
forth action hAction(BS
C6900,BSC
6910)
DL LDR DlLdrFifth
fifth action Action(BSC
6900,BSC69
10)
DL LDR DlLdrSixth
sixth action Action(BSC
6900,BSC69
10)
DL LDR DlLdrSevent
seventh hAction(BS
action C6900,BSC
6910)
DL LDR DlLdrEight
eighth action hAction(BS
C6900,BSC
6910)
DL LDR DlLdrNinth
ninth action Action(BSC
6900,BSC69
10)
DL LDR DlLdrTenth
tenth action Action(BSC
6900,BSC69
10)
DL LDR DlLdrEleve
eleventh nthAction(B
Action SC6900,BS
C6910)
UL LDR UlLdrFirstA
first action ction(BSC6
900,BSC691
0)
UL LDR UlLdrSecon
second dAction(BS
action C6900,BSC
6910)
UL LDR UlLdrThird
third action Action(BSC
6900,BSC69
10)
UL LDR UlLdrFourt
forth action hAction(BS
C6900,BSC
6910)
UL LDR UlLdrFifth
fifth action Action(BSC
6900,BSC69
10)
UL LDR UlLdrSixth
sixth action Action(BSC
6900,BSC69
10)
UL LDR UlLdrSevent
seventh hAction(BS
action C6900,BSC
6910)
UL LDR UlLdrEight
eighth action hAction(BS
C6900,BSC
6910)
UL LDR UlLdrNinth
ninth Action Action(BSC
6900,BSC69
10)
UL LDR UL UlPSU2LH
PS Domain OUeNum(B
Load HO SC6900,BS
User No. C6910)
DL LDR UL DlPSU2LH
PS Domain OUeNum(B
Load HO SC6900,BS
User No. C6910)
Activation Observation
To determine whether the feature has taken effect, check the following cell-level counters. If
any of counter values is not 0, the feature has taken effect.
l VS.U2LTEHO.RRCRelease.Load(BSC6900,BSC6910), which provides the number of
UMTS-to-LTE load-based PS redirections for cells
l VS.U2LTEHO.RRCRelease.Load.Blind(BSC6900,BSC6910), which provides the
number of UMTS-to-LTE load-based PS blind redirections for cells
l VS.U2LTEHO.AttRelocPrepOutPS.Load(BSC6900,BSC6910), which provides the
number of outgoing UMTS-to-LTE load-based PS handover preparation attempts for
cells
l VS.U2LTEHO.SuccRelocPrepOutPS.Load(BSC6900,BSC6910), which provides the
number of successful preparations for outgoing UMTS-to-LTE load-based PS handovers
for cells
----End
When configuring the feature on the CME, perform a single configuration first, and then perform a batch
modification if required. Configure the parameters of a single object before a batch modification.
Perform a batch modification before logging out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
l VS.U2LTEHO.RRCRelease.Load(BSC6900,BSC6910)
l VS.U2LTEHO.RRCRelease.Load.Blind(BSC6900,BSC6910)
These two counters can be observed to see whether the Load-Based PS Service Redirection
from UMTS to LTE feature has been activated. For details, see the description about
activation observation in section Activation Observation.
When RIM messages are exchanged using the CN, the additional counters to be monitored are
the same as those to be monitored for service-based UMTS-to-LTE PS redirections. For
details, see 10.5.5 Performance Monitoring.
When RIM messages are exchanged using the eCoordinator, the additional counters to be
monitored are the same as those to be monitored for service-based UMTS-to-LTE PS
redirections. For details, see 10.5.5 Performance Monitoring.
10.7.7 Troubleshooting
N/A
The proportion of UMTS/LTE multi-mode UEs on a network affects the gains brought by the feature.
That is, the feature brings significant effect of inter-RAT load balancing when the proportion of
UMTS/LTE multi-mode UEs is high. However, it is hard to specify a proportion of UMTS/LTE multi-
mode UEs for deploying the feature, which depends on the specific network conditions and the
operator's policy.
10.8.3 Planning
None
10.8.4 Deployment
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The SGSN supports 3GPP Release 8 or later and UMTS-to-LTE PS handovers.
– The UE supports 3GPP Release 8 and is a UMTS/LTE multi-mode terminal.
– The eNodeB supports UMTS-to-LTE PS handovers.
Data Preparation
Table 10-29 lists the data to prepare before activating Load Based PS Handover from UMTS
to LTE.
Table 10-29 Data to prepare before activating Load Based PS Handover from UMTS to LTE
Gold user load GoldUserLoadCo Set this parameter to the default Radio
control switch ntrolSwitch(BSC6 value. network plan
900,BSC6910) (internal)
Table 10-30 lists the parameter to be set to enable exchange of RIM messages through the
eCoordinator.
Precautions
If load-based LTE-to-UMTS related features are deployed on the LTE network, ping-pong
handover or redirection may occur between UMTS and LTE. For details about load-based
LTE-to-UMTS related features deployed on the LTE network, see MLB Feature Parameter
Description for eRAN. To prevent ping-pong handovers and redirections between UMTS and
LTE, it is recommended that this feature as well as the function of selecting LTE cells based
on LTE cell load be enabled.
To select LTE cells based on LTE cell load, the RNC needs to obtain LTE cell load
information from the eNodeB through the RIM procedure. The eNodeB is the receiving party
of the first RIM message. Therefore, the related feature on the LTE side must be enabled first.
Otherwise, the eNodeB cannot respond to the RNC with LTE cell load information, and the
RIM procedure will be terminated before it is complete. For the related feature on the LTE
side, see Inter-RAT Mobility Management in Connected Mode Feature Parameter Description
for eRAN.
You can run the ADD ULTECELL command to modify the configuration if an LTE cell has not been
configured.
Set the CnOpGrpIndex parameter in the ADD ULTECELL command to the index of a group that
includes operators of LTE cells. If the group includes only operators of UMTS cells, UMTS-to-LTE
handovers will fail.
Step 3 If a neighboring LTE cell has not been configured, run the RNC MML command ADD
ULTENCELL to configure a neighboring LTE cell.
Step 4 (Optional) To turn on the U2L connected mode priority switch, run the RNC MML command
SET UCORRMALGOSWITCH and select HO_U2L_CONN_PRIO_SWITCH under
HandOver Switch1. Run the RNC MML command MOD UCELLNFREQPRIOINFO and
set the connected mode priorities of LTE frequencies.
Step 5 Run the RNC MML command SET UU2LTEHONCOV. In this step, set the RNC-level
parameters related to measurements for load-based UMTS-to-LTE handovers. These
parameters are listed in Table 10-29. The RNC sends the parameter settings to the UE through
a measurement control message.
Step 6 (Optional) If parameters related to the measurement algorithm for a cell need to be
independently set, run the RNC MML command ADD UCELLU2LTEHONCOV to set cell-
level parameters related to the load-based UMTS-to-LTE measurement algorithm based on
Table 10-29.
NOTE
If a cell has been configured with parameters related to the measurement algorithm, run the MOD
UCELLU2LTEHONCOV command in step 3 to modify the configuration.
If the cell-level and RNC-level measurement-related parameters are both available, the cell-level
measurement-related parameters prevail. If the cell-level measurement-related parameters are
unavailable, the cell uses the RNC-level measurement-related parameters.
Step 7 Run the RNC MML command MOD UTYPRABBASIC to modify the basic information
about a typical RAB. In this step, set Service-Based Handover to LTE Allowed to
HO_TO_EUTRAN_SHOULD_BE_PERFORM.
Step 8 Run the RNC MML command SET UCORRMALGOSWITCH. In this step, select
HO_LTE_PS_OUT_SWITCH under the HandOver Switch parameter to enable UMTS-to-
LTE interoperations for PS services.
Step 9 Run the RNC MML command SET UCORRMALGOSWITCH with
HO_U2L_LOAD_PS_ HO _SWITCH under HandOver Switch1 selected to turn on the
load-based UMTS-to-LTE handover switch.
Step 10 Run the RNC MML command SET UCORRMALGOSWITCH to turn off the non-
neighboring-LTE-cell-based redirection switch. In this step, deselect the
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH under HandOver Switch1.
Step 11 Run the RNC MML command ADD UCELLLDR. In this step, turn on the
PSInterU2LLDHO switch by referring to section 4.3.4.8 Suggestions for LDR Action
Configurations and set UL LDR UL PS Domain Load HO User No. and DL LDR UL PS
Domain Load HO User No. based on the network plan.
Step 12 (Optional) If the DC-HSDPA feature is enabled, run the RNC MML command SET UCMCF
with MC-HSDPA and LTE CM Coexist Indicator set to TRUE.
Step 14 (Optional) Run the RNC MML command SET UU2LTEHONCOV to enable the function of
preventing frequent retries after a UMTS-to-LTE PS handover failure. In this step, set
U2LPhyChFailNum(BSC6900,BSC6910) and
PenaltyTimeForPhyChFail(BSC6900,BSC6910) to appropriate values.
Step 15 (Optional) To enable the cell load-based LTE cell selection function, perform the following
operations:
1. (Optional) When RIM messages are exchanged using the CN and the UMTS PLMN
differs from the LTE PLMN, run the RNC MML command LST UCNOPERATOR to
query the value of Cn Operator Index and configure a CN route for the UMTS-to-LTE
RIM procedure according to the query result. Then run the RNC MML command MOD
ULTECELL with CN Operator Index for Routing in U2L RIM set to the queried
index of the local operator.
2. Run the RNC MML command SET URRCTRLSWITCH. In this step, select
INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH under the Process Control
Switch 5 parameter.
3. (Optional) When RIM messages are exchanged using the eCoordinator:
– Run the RNC MML command SET URRCTRLSWITCH. In this step, set
RIM_ON_ECO_SWITCH under the Process Control Switch 5 parameter to ON.
– Run the MML command SET ECOMMONCTRL on the eCoordinator. In this
step, set RIM_SWITCH under the Process Control Switch parameter to ON.
4. Run the RNC MML command ADD UCELLHOCOMM/MOD UCELLHOCOMM
with LOAD_BASE_U2L_LTE_LOAD_SWITCH under the SW Consider LTE Load
in U2L Interoperation parameter selected to enable the function of selecting LTE cells
based on LTE cell load.
Step 16 If the LTE system supports extended frequency bands (26 to 31), run the RNC MML
command SET UCORRMALGOSWITCH with HO_MC_EXT_LTE_BAND_SWITCH
under the HandOver Switch2 parameter selected.
Step 18 (Optional) When RAN Sharing or MOCN is enabled, run the RNC MML command SET
LICENSE to set the Load based PS Handover from UMTS to LTE-kbps parameter for the
primary and secondary operators.
When the direct tunnel function is not enabled on the RNC, only the routes and UP data channels
between the LTE S-GW and SGSN need to be configured on the CN side.
Step 20 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_11_BIT28 under Reserved Switch 11 selected to allow load-based
UMTS-to-LTE redirections or handovers only for LTE subscribers.
----End
DlLdrPsRTQosRenegRabNum=1, DlCSInterRatShouldBeHOUeNum=3,
DlPSInterRatShouldBeHOUeNum=1, DlLdrAMRRateReductionRabNum=1,
DlCSInterRatShouldNotHOUeNum=3, DlPSInterRatShouldNotHOUeNum=1,
UlLdrFirstAction=BERateRed, UlLdrSecondAction=InterFreqLDHO,
UlLdrThirdAction=PSInterU2LLDHO, UlLdrFourthAction=NoAct, UlLdrFifthAction=NoAct,
UlLdrSixthAction=NoAct, UlLdrSeventhAction=NoAct, UlLdrEighthAction=NoAct, UlLdr
NinthAction=NoAct, UlLdrBERateReductionRabNum=1, UlLdrPsRTQosRenegRabNum=1,
UlCSInterRatShouldBeHOUeNum=3, UlPSInterRatShouldBeHOUeNum=1,
UlLdrAMRRateReductionRabNum=1, UlCSInterRatShouldNotHOUeNum=3,
UlPSInterRatShouldNotHOUeNum=1, UlInterFreqHoCellLoadSpaceThd=20,
DlInterFreqHoCellLoadSpaceThd=20, UlInterFreqHoBWThd=200000,
DlInterFreqHoBWThd=200000, MbmsDecPowerRabThd=1, CellLdrSfResThd=SF8,
LdrCodePriUseInd=TRUE, MaxUserNumCodeAdj=1, UlLdrCreditSfResThd=SF8,
DlLdrCreditSfResThd=SF8, LdrCodeUsedSpaceThd=13, CodeCongSelInterFreqHoInd=FALSE,
GoldUserLoadControlSwitch=OFF, UlPSU2LHOUeNum=1, DlPSU2LHOUeNum=1;
//Enabling the function of preventing the service rate increase in compressed mode
SET UCORRMALGOSWITCH: PsSwitch=PS_CMACTIVE_PROCESS_OPT_SWITCH-1;
//Enabling the function of allowing DC-HSDPA UEs to support measurement of LTE
cells in compressed mode
SET UCMCF: McHsdpaLteCMPermissionInd=TRUE;
//Enabling the function of preventing frequent retries after a UMTS-to-LTE PS
handover failure
SET UU2LTEHONCOV: U2LPhyChFailNum=3, PenaltyTimeForPhyChFail=30;
//Enabling the cell load-based LTE cell selection function
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged using the CN
MOD ULTECELL: LTECellIndex=1, U2LRimCNOperatorRTIndex=1;
SET URRCTRLSWITCH: ProcessSwitch5=INTERRAT_LOAD_REPORT_FROM_LTE_SWITCH-1;
//Enabling the cell load-based LTE cell selection function when RIM messages are
exchanged using the eCoordinator
SET URRCTRLSWITCH: ProcessSwitch5=RIM_ON_ECO_SWITCH-1;
MOD UCELLHOCOMM: CellId=1, U2LLTELoadSwitch=LOAD_BASE_U2L_LTE_LOAD_SWITCH-1;
//Enabling the RIM procedure on the eCoordinator when RIM messages are exchanged
using the eCoordinator
SET ECOMMONCTRL: ProcessSwitch=RIM_SWITCH-1;
//Prohibiting UEs from attempting U2L redirection or handover when they are
performing CS paging procedures
SET UCORRMPARA: PerfEnhanceSwitch5=PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPAGING-1;
//Enabling interoperability between UMTS frequency bands and LTE extended
frequency bands 26 to 31 when the LTE system supports these extended frequency
bands
SET UCORRMALGOSWITCH: HoSwitch2=HO_MC_EXT_LTE_BAND_SWITCH-1;
//Enabling the function of data forwarding during UMTS-to-LTE handovers
SET URRCTRLSWITCH: OptimizationSwitch5=U2L_RELOC_MSG_TAKE_ERAB_SWITCH-1;
//When the direct tunnel function is enabled on the RNC, the following operations
must also be performed:
//Configuring a route between the RNC and the LTE S-GW
ADD
IPRT:SRN=0,SN=16,DSTIP="10.161.0.1",DSTMASK="255.255.255.255",NEXTHOPTYPE=Gateway,
NEXTHOP="162.0.43.254",PRIORITY=HIGH;
//Configuring a UP data channel between the BSC6900 and the LTE S-GW
ADD IPPATH: ANI=1118, PATHID=3, ITFT=IUPS, PATHT=QoS, IPADDR="53.100.61.1",
PEERIPADDR="10.161.0.1", PEERMASK="255.255.255.0", TXBW=1000, RXBW=1000,
VLANFLAG=DISABLE, PATHCHK=ENABLED, ECHOIP="10.161.0.1";
//Configuring a UP data channel between the BSC6910 and the LTE S-GW
ADD IPPOOL: IPPOOLINDEX=0, MODE=ETHL3, IPPOOLNAME="IPPOOLNAME";
//Turning on the U2L PS service user-plane interruption time reduction switch
SET URRCTRLSWITCH: OptimizationSwitch5=PS_U2L_USER_PLANE_DELAY_OPT_SWITCH-1;
//Turning on the switch for allowing only LTE subscribers to perform load-based
U2L handover or redirection when the CN cannot obtain LTE subscription
information from UEs
SET UALGORSVPARA: RsvSwitch11=RESERVED_SWITCH_11_BIT28-1;
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
Measurement LTEMeasQu
Quantity for Event anOf3C(BSC
3C Measurement 6900,BSC691
of LTE 0)
3C Hysteresis Hystfor3C(B
SC6900,BSC
6910)
Inter-RAT HO PenaltyTime
Physical Channel ForPhyChFa
Failure Penalty il(BSC6900,
Timer BSC6910)
UL CS should be UlCSInterRa
HO user number tShouldBeH
OUeNum(BS
C6900,BSC6
910)
UL PS should be UlPSInterRat
HO user number ShouldBeHO
UeNum(BSC
6900,BSC691
0)
UL LDR-AMR UlLdrAMRR
rate reduction ateReduction
RAB number RabNum(BS
C6900,BSC6
910)
DL CS should be DlCSInterRa
HO user number tShouldBeH
OUeNum(BS
C6900,BSC6
910)
DL PS should be DlPSInterRat
HO user number ShouldBeHO
UeNum(BSC
6900,BSC691
0)
DL LDR-AMR DlLdrAMRR
rate reduction ateReduction
RAB number RabNum(BS
C6900,BSC6
910)
UL LDR UL PS UlPSU2LHO
Domain Load HO UeNum(BSC
User No. 6900,BSC691
0)
DL LDR UL PS DlPSU2LHO
Domain Load HO UeNum(BSC
User No. 6900,BSC691
0)
Activation Observation
To determine whether the feature has taken effect, check the cell-level counters or the
interface messages.
l Checking the cell-level counters
If either of the following counter values is not 0, the feature has taken effect.
– VS.U2LTEHO.AttOutPS.Load(BSC6900,BSC6910), which provides the number
of load-triggered UMTS-to-LTE PS handover attempts
– VS.U2LTEHO.SuccOutPS.Load(BSC6900,BSC6910), which provides the
number of successful load-triggered UMTS-to-LTE PS handovers
– VS.U2LTEHO.AttRelocPrepOutPS.Load(BSC6900,BSC6910), which provides
the number of outgoing UMTS-to-LTE load-based PS handover preparation
attempts for cells
– VS.U2LTEHO.SuccRelocPrepOutPS.Load(BSC6900,BSC6910), which provides
the number of successful preparations for outgoing UMTS-to-LTE load-based PS
handovers for cells
----End
When configuring the DB-HSDPA feature on the CME, perform a single configuration first, and then
perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification
wizard. For instructions on how to perform a batch modification through the CME batch
modification center, press F1 while running the wizard to obtain online help.
These counters specify whether the Load-Based PS Service Handover from UMTS to LTE
feature is activated. For details, see the description about activation observation in section
Activation Observation.
Cell-level counters related to handover failures are the same as those used for coverage-based
UMTS to LTE handovers. For specific counters, see 10.4.5 Performance Monitoring.
Counters related to neighboring cells of load based UMTS-to-LTE PS handovers are the same
as those for coverage-based UMTS-to-LTE handovers. For specific counters, see 10.4.5
Performance Monitoring.
Counters related to neighboring cells of failed handovers are the same as those used for
coverage-based UMTS-to-LTE handovers. For specific counters, see 10.4.5 Performance
Monitoring.
When RIM messages are exchanged using the CN, the additional counters to be monitored are
the same as those to be monitored for service-based UMTS-to-LTE PS redirections. For
details, see 10.5.5 Performance Monitoring.
When RIM messages are exchanged using the eCoordinator, the additional counters to be
monitored are the same as those to be monitored for service-based UMTS-to-LTE PS
redirections. For details, see 10.5.5 Performance Monitoring.
10.8.7 Troubleshooting
N/A
10.9.2 Deployment
This section describes how to activate, verify, and deactivate the basic feature WRFD-140102
CS Fallback Guarantee for LTE Emergency Calls. For details about how to configure this
feature on the LTE side, see the related documents provided by the LTE equipment vendor.
Requirements
l Dependencies on Hardware
This feature does not have any special requirements for hardware.
l Dependencies on Other Features
This feature does not depend on other features.
l License
This feature is not under license control.
l Other Prerequisites
– UEs of Release 8 or later support PS handovers from LTE to UMTS and CSFB
from LTE to UMTS. In addition, the message sent to the MME carries an
emergency call indicator.
– The eNodeB supports PS handovers from LTE to UMTS and CSFB from LTE to
UMTS. In addition, the handover request sent to the RNC carries CSFB High
Priority.
– The CN supports PS handovers from LTE to UMTS and CSFB from LTE to UMTS.
In addition, the INITIAL CONTEXT SETUP REQUEST message sent from the
MME to the eNodeB carries CS Fallback High Priority.
For details about how to configure this feature on the LTE side, see the related documents
provided by the LTE equipment vendor. If the LTE equipment is provided by Huawei, see CS
Fallback Parameter Description for eRAN.
Step 2 Run the RNC MML command SET UCORRMALGOSWITCH. In this step, select
HO_L2U_EMGCALL_SWITCH under HandOver Switch to enable this feature.
----End
Method 1:
NOTE
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging out of
the parameter setting interface.
Set the parameters described in Table 10-33 on the CME. For instructions on how to perform
the CME single configuration, see CME Single Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
Method 2:
This feature can be batch activated using the CME. For detailed operations, see the following
section in the CME product documentation or online help: Managing the CME > CME
Guidelines > Enhanced Feature Management > Feature Operation and Maintenance.
Activation Observation
Check the value of the VS.L2U.SuccRelocPrepInPS.Emerg.RNC counter. If the counter value
is not 0, the feature has taken effect. This counter provides the number of successful LTE-to-
UMTS PS handover preparations caused by CSFB of LTE emergency calls for the RNC.
When configuring WRFD-140102 CS Fallback Guarantee for LTE Emergency Calls on the CME,
perform a single configuration first, and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
Success rate of LTE-to-UMTS PS handovers caused by CSFB for LTE emergency calls =
VS.L2U.SuccRelocInPS.Emerg.RNC(BSC6900,BSC6910)/
VS.L2U.AttRelocPrepInPS.Emerg.RNC(BSC6900,BSC6910).
l VS.L2U.AttRelocPrepInPS.Emerg.RNC(BSC6900,BSC6910): Number of incoming
LTE-to-UMTS PS handover attempts caused by LTE emergency calls at the RNC level.
When receiving the Relocation Request message which carries Source RNC To Target
RNC Transparent Container containing CSFB High Priority, the RNC increases the
counter value by 1 and stamps the identity of CSFB High Priority on the UE. This
identity is erased after the emergency call is released.
l VS.L2U.SuccRelocInPS.Emerg.RNC(BSC6900,BSC6910): Number of successful
incoming LTE-to-UMTS PS handovers caused by LTE emergency calls at the RNC
level. When the RNC sends the SGSN a Relocation Complete message, the incoming
LTE-to-UMTS PS handover is successful and the RNC increases the counter value by 1.
In ideal cases, the LTE-to-UMTS PS handover success rate caused by CSFB for LTE
emergency calls can reach 100%. Perform troubleshooting if it does not reach 100%.
10.10.3 Planning
None
10.10.4 Deployment-
This section describes how to activate, verify, and deactivate the optional feature
WRFD-150215 SRVCC from LTE to UMTS with PS Handover. For details about how to
configure this feature on the LTE side, see SRVCC Feature Parameter Description provided
by the LTE equipment vendor.
Requirements
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 1: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "Voice Erlang-Erlang". The licensed values can
be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the RNC MML command SET LICENSE. If the
FeatureResAssignMode parameter in this command is set to AutoAssign, the licensed
values are automatically allocated among the primary and secondary operators. If the
FeatureResAssignMode parameter in this command is set to ManualAssign, you also
need to specify the related license parameters to implement manual license allocation.
l Hardware
None
l Other Features
None
l Other Prerequisites The UE supports 3GPP Release 8 or a later version.
Data Preparation
Table 10-36 lists the data to prepare before activating SRVCC from LTE to UMTS with PS
Handover.
Table 10-36 Data to prepare before activating SRVCC from LTE to UMTS with PS Handover
Channel and Init NRTInitRateforL2 Set this parameter to Radio network plan
Rate for NRT PS U(BSC6900,BSC69 the default value. (internal)
Dur Incom L2U HO 10)
ARP for Emergency L2USRVCCEmerC Configure ARPs for Radio network plan
Call During L2U allARP(BSC6900,B emergency calls. (internal)
SRVCC SC6910)
Precautions
l The SRVCC from LTE to UMTS with PS Handover feature depends on the feature
LOFD-001022 SRVCC to UTRAN, which must be activated before you can use the
SRVCC from LTE to UMTS with PS Handover feature.
l In a CS+PS SRVCC handover, LTE signaling messages whose QoS class identifier
(QCI) is 5 are mapped onto the IP multimedia subsystem (IMS) on the UMTS side.
When the data rates configured for these signaling messages on the LTE side are high,
the UTMS side will respond to the RELOCATION REQUEST message from the LTE
side with a relocation failure message, resulting in a low LTE-to-UMTS handover
preparation success rate. The reasons for these handover preparation failures are as
follows:
– When the ImsChlType(BSC6900,BSC6910) parameter is set to DCH on the UMTS
side, the maximum data rate for the previously mentioned signaling messages is 384
kbit/s in the uplink and downlink. This data rate is lower than the data rates required
by these signaling messages.
– When the ImsChlType(BSC6900,BSC6910) parameter is set to HSPA on the
UMTS side, the maximum data rates for the previously mentioned signaling
messages are 84.2 Mbit/s in the downlink and 23 Mbit/s in the uplink. Such data
rates may also be lower than the data rates required by these signaling messages. If
these signaling messages require that the downlink data rate be 84.2 Mbit/s, the
WRFD-010693 64QAM+MIMO and WRFD-010699 DC-HSDPA+MIMO features
must be both activated on the UMTS side.
To prevent a low LTE-to-UMTS handover preparation success rate, perform the
following operation:
Run the RNC MML command SET UCORRMALGOSWITCH and select the
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH check box under the
CmpSwitch(BSC6900,BSC6910) parameter so that IMS services are considered as
BE services.
l The maximum rate of streaming services on the UMTS network is 384 kbit/s. To prevent
handover preparation failures of streaming services, ensure that the rate of streaming
services on the LTE side does not exceed 384 kbit/s.
Step 1 Run the RNC MML command SET URRCTRLSWITCH to activate the feature. In this step,
selectL2U_SRVCC_WITH_PS_HO_SWITCH under Process Control Switch 2.
Step 2 Run the RNC MML command SET USTATETIMER with Inter-RAT HO PS Relocation
Request Wait Timer and Inter-RAT HO CS Relocation Request Wait Timer set to
appropriate values.
Step 6 Run the RNC MML command SET UCORRMPARA and select
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWITCH under Performance Enhance
Switch 7 so that the RNC can reattempt the admission with a reduced rate when the PS
service in combined services fails to be admitted by the UMTS network during an SRVCC
handover.
Step 7 Run the RNC MML command SET URRCTRLSWITCH and select
L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_SWITCH under Process Control Switch
5 so that the RNC allows an incoming CS handover when it only receives a RELOCATION
REQUEST message from the CS domain but does not receive the RELOCATION REQUEST
message within a specific timer for an SRVCC UE who performs combined services.
Step 8 (Optional) Run the RNC MML command SET UFRC with ARP for Emergency Call
During L2U SRVCC set to an appropriate value.
Step 9 (Optional) Run the RNC MML command SET UALGORSVPARA with
RESERVED_SWITCH_16_BIT6 under Reserved Parameter 16 selected to ensure that the
RNC attempts admission of CS only services when the number of RABs allocated to the
admitted combined services exceeds the allowed maximum specification for a UMTS cell
during LTE to UMTS handovers of combined services.
Step 10 (Optional) When RAN Sharing or MOCN is enabled, run the RNC MML command SET
LICENSE to set the SRVCC from LTE to UMTS with PS Handover-Erlang and SRVCC
from LTE to UMTS with PS Handover-kbps parameters for the primary and secondary
operators.
Step 11 (Optional) When the activation time of the RB reconfiguration in the CS domain expires for
the SRVCC UEs that have been handed over to the UMTS network, configure the CS RB
reconfiguration activation time offset during LTE-to-UMTS handovers by running the RNC
MML command SET UALGORSVPARA with bits 0 to 7 of the
RsvU32Para33(BSC6900,BSC6910) parameter specified.
Step 12 (Optional) Run the RNC MML command SET UFRC with the Initial Rate Type for Income
L2U HO of NRT Service parameter specified to configure the rate at which the non-real-time
PS service is admitted.
l If Initial Rate Type for Income L2U HO of NRT Service is set to OFF, the non-real-
time PS service is admitted at the initial data rate.
l If Initial Rate Type for Income L2U HO of NRT Service is set to DCH0K, DCH8K,
or DCH8KHSDPA, the non-real-time PS service is admitted at the configured data rate.
Step 13 (Optional) Run the SET UALGORSVPARA command and set the
RESERVED_SWITCH_14_BIT24 option under the RsvSwitch14(BSC6900,BSC6910)
parameter to specify the pilot power offset that the RNC configures on the NodeB during an
SRVCC procedure implemented through LTE-to-UMTS handover. When this option is
selected, the RNC sets the pO3-ForPilotBits IE value to 0 dB.
----End
Perform the following operations to activate the CS only SRVCC feature:
Step 1 Run the RNC MML command SET URRCTRLSWITCH with the
SYSHO_CSIN_PERMIT_SWITCH(Switch for Permit Incoming CS Inter-RAT
Handovers) option selected under the RsvdPara1(BSC6900,BSC6910) parameter to enable
the LTE-to-UMTS CS only SRVCC feature.
Step 2 (Optional) Run the RNC MML command SET UALGORSVPARA with bits 0 to 7 of the
RsvU32Para33(BSC6900,BSC6910) parameter specified to configure the CS RB
reconfiguration activation timer offset for the UEs that have performed LTE-to-UMTS
SRVCC.
Step 3 (Optional) Run the SET UALGORSVPARA command and set the
RESERVED_SWITCH_14_BIT24 option under the RsvSwitch14(BSC6900,BSC6910)
parameter to specify the pilot power offset that the RNC configures on the NodeB during an
SRVCC procedure implemented through LTE-to-UMTS handover. When this option is
selected, the RNC sets the pO3-ForPilotBits IE value to 0 dB.
----End
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
Activation Observation
Check the value of the VS.SRVCC.L2U.SuccRelocPrepInCSPS(BSC6900,BSC6910)
counter. If the counter value is not 0, the feature has taken effect. This counter provides the
number of successful preparations for incoming LTE-to-UMTS CS+PS handovers triggered
by SRVCC for VoIP services in a cell.
After the feature is activated, query the value of the
VS.SRVCC.L2U.SuccRelocPrepInCS.PSTimeOut(BSC6900,BSC6910) counter, which
indicates the number of times that the LTE-to-UMTS CS handover preparation triggered by
SRVCC for CS+PS combined services succeeds while the PS handover preparation times out.
If the value of this counter is not 0, the function of CS only handover during SRVCC of CS
+PS combined services has been enabled.
----End
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
Set the parameters described in Table 10-38 on the CME. For instructions on how to perform
the CME single configuration, see CME Single Configuration Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
If any of the preceding success rates is lower than expected, modify parameter settings. For
details, see section 10.10.6 Parameter Optimization.
The RNC admits the LTE-to-UMTS SRVCC with PS handover of a UE that is performing CS
and PS combined services only when it receives the RELOCATION REQUEST messages
from both the CS and PS domains. When receiving a RELOCATION REQUEST message
from one domain, the RNC starts a timer. If the RNC does not receive a RELOCATION
REQUEST message from the other domain when the timer expires, the RNC rejects this
handover request. This type of failed handovers is measured by the
VS.SRVCC.FailRelocPrepInCSPS.CSTimeOut(BSC6900,BSC6910) and
VS.SRVCC.FailRelocPrepInCSPS.PSTimeOut(BSC6900,BSC6910) counters.
A handover may also fail when the RNC receives the RELOCATION REQUEST message
from both CS and PS domains. For the counter measuring the number of such handover
failures, see 10.9.3 Performance Monitoring.
If the timer on the RNC side is longer than the timer on the CN side, the CN sends an IU
RELEASE COMMAND message to release the IU interface. In this circumstance, the
preceding counters are not measured even when a handover fails.
If UTRAN resources are insufficient, consult Huawei engineers to reduce the network load.
If the RNC does not receive incoming CS+PS handover requests during the validity period of
the timer, run the RNC MML command SET USTATETIMER to raise the values of
IRatHoWaitCSRelocReqTmr(BSC6900,BSC6910) and
IRatHoWaitPSRelocReqTmr(BSC6900,BSC6910).
10.10.7 Troubleshooting
N/A
10.11.1 When to Use RIM Based UMTS Target Cell Selection for
LTE
This feature is recommended in the overlapping coverage area of UMTS and LTE.
10.11.3 Planning
RF Planning
N/A
Network Planning
There is an overlapping coverage area of UMTS and LTE.
Hardware Planning
N/A
10.11.4 Deployment
Requirements
l Dependencies on Other Features
– The LTE feature LOFD-001033 CS Fallback to UTRAN or LOFD-001044 Inter-
RAT Load Sharing to UTRAN has been activated.
For details on how to activate the LTE feature LOFD-001033 CS Fallback to
UTRAN, see the eRAN document CS Fallback Feature Parameter Description. For
the LTE feature LOFD-001044 Inter-RAT Load Sharing to UTRAN, see the eRAN
document MLB Feature Parameter Description.
– The UMTS feature WRFD-020106 Load Reshuffling feature has been activated.
For details on how to activate the feature WRFD-020106, see Load Control Feature
Parameter Description for RAN.
– The UMTS feature WRFD-020107 Overload Control feature has been activated.
For details on how to activate the feature WRFD-020107, see Overload Control
Feature Parameter Description for RAN.
l Other NEs as well as network equipment and transmission devices from other vendors
The MME, Serving GPRS Support Node (SGSN), and eNodeB supports sending
requests for and receiving UMTS cell load information from the RNC. In addition: When
RIM messages are exchanged using the CN, the MME and SGSN must support the RIM
procedure specified in 3GPP Release 9 and later versions. When RIM messages are
exchanged using Huawei eCoordinator, the eCoordinator must be deployed and the
eNodeB and RNC must be connected to the same eCoordinator so that the eNodeB,
RNC, and eCoordinator support the RIM procedure, through which LTE cell load
information is transmitted, which is defined in 3GPP Release 9 or a later version,
between the UMTS and LTE networks. The RIM procedure is used to notify the eNodeB
of the load status of target UMTS cells.
l Other Requirements
When this feature is activated, perform the following operators on the LTE network if
Huawei devices are deployed on the LTE network:
– Run the MOD GLOBALPROCSWITCH command with the Choose UMTS Cell
Load Info Trans Channel parameter set to BASED_ON_RIM.
– If RIM messages are exchanged using the eCoordinator in the RIM procedure, run
the MOD ENODEBALGOSWITCH command with the Support RIM by
eCoordinator Switch parameter set to ON.
l License
For details about how to activate a license, see License Management Feature Parameter
Description.
Data Preparation
Table 10-40 lists the data to be prepared before activating RIM Based UMTS Target Cell
Selection for LTE.
Table 10-40 Data to be prepared before activating RIM Based UMTS Target Cell Selection
for LTE
Parameter Name Parameter ID Setting Notes Data Source
Table 10-41 lists the parameter to be set on the eCoordinator when RIM messages are
exchanged using the eCoordinator.
Precautions
None
Step 2 Run the RNC MML command ADD UCELLLICENSE to activate the cell-level license for
the feature. In this step, select CELLLOAD_SHARED_BASEDON_RIM under the
Function Switch1 parameter.
Step 3 (Optional) When RIM messages are exchanged using the eCoordinator: Run the RNC MML
command SET URRCTRLSWITCH. In this step, set RIM_ON_ECO_SWITCH under the
Process Control Switch 5 parameter to ON. Run the MML command SET
ECOMMONCTRL on the eCoordinator. In this step, set RIM_SWITCH under the Process
Control Switch parameter to ON.
Step 4 (Optional) If eRAN7.0 or a later version is used on the LTE side, run the RNC MML
command SET ULDM with UMTS Cell Load Level Reported to LTE set to D4 to enable
reporting of four UMTS load states.
----End
When configuring WRFD-150231 RIM Based UMTS Target Cell Selection for LTE on the CME,
perform a single configuration first, and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
Set the parameters described in Table 10-42 on the CME. For instructions on how to perform
the CME single configuration, see CME Single Configuration Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
NOTE
Activation Observation
To determine whether the feature has taken effect, check the interface message or the event-
based counter (EBC) on the LTE side.
When configuring WRFD-150231 RIM Based UMTS Target Cell Selection for LTE on the CME,
perform a single configuration first, and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
----End
10.11.7 Troubleshooting
N/A
l UMTS and LTE are deployed together and UMTS and LTE coverage overlaps.
l The eNodeB, RNC, MME, and MSC meet the following requirements:
-All of them are provided by Huawei and support Ultra-Flash CSFB.
-The MSC is of the CS11.0 version or later.
-The MME is of the PS12.1 version or later.
l There are UEs supporting LTE-to-UMTS SRVCC with handover on the network.
10.12.3 Planning
N/A
10.12.4 Deployment
10.12.4.1 Requirements
l License
The license controlling this feature has been activated on the RNC side.
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary
and secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Method 1: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "Voice Erlang-Erlang". The licensed values can
be set by running the SET LICENSE command. If the FeatureResAssignMode
parameter in this command is set to AutoAssign, the licensed values are automatically
allocated among the primary and secondary operators. If the FeatureResAssignMode
parameter in this command is set to ManualAssign, you also need to specify the related
license parameters to implement manual license allocation.
Method 2: It is recommended that the license allocation proportion of a feature be
consistent with that of the license item "PS throughput only-kbps". The licensed values
can be set by running the SET LICENSE command. If the FeatureResAssignMode
parameter in this command is set to AutoAssign, the licensed values are automatically
allocated among the primary and secondary operators. If the FeatureResAssignMode
parameter in this command is set to ManualAssign, you also need to specify the related
license parameters to implement manual license allocation.
l Other NEs as well as network equipment and transmission devices from other vendors
– The eNodeB, RNC, MME, and MSC are Huawei devices and support Ultra-Flash
CSFB. The MSC must be of the CS11.0 version or later. The MME must be of the
PS12.1 version or later.
– UEs support LTE-to-UMTS SRVCC with handover.
l Dependencies on Other Features
– Huawei LTE feature LOFD-070202 Ultra-Flash CSFB or TDLOFD-070202 Ultra-
Flash CSFB
– Ultra-Flash CSFB supported by Huawei MME
SRB Data Rate for UltraFlashCSFBSR You are advised to set this Engineering
Ultra-Flash CS BRate(BSC6900,BS parameter to SRB_13.6K. design
Fallback C6910)
10.12.4.3 Precautions
Ultra-Flash CSFB is a proprietary procedure and its algorithm is triggered by the eNodeB. To
ensure normal implementation of this algorithm, enable this function on the RNC, MSC, and
MME before you enable this function on the eNodeB.
10.12.4.4 Activation
Step 2 Run the RNC MML command SET UFRC. In this step, set SRB Data Rate for Ultra-Flash
CS Fallback to SRB_13.6K.
Step 3 (Optional) Run the RNC MML command SET URRCTRLSWITCH with
CSPS_SYS_HO_IN_SMC_SWITCH selected under Optimization Switch 8 so that the
RNC delivers security mode commands in CS and PS domains to implement integrity
protection.
Step 4 (Optional) If the activation of CS RB reconfiguration times out after a Ultra-Flash CSFB UE
falls back to the UMTS network, you can specify the CS RB reconfiguration activation time
offset by running the RNC MML command SET UALGORSVPARA with bits 0 to 7 of the
RsvU32Para33(BSC6900,BSC6910) parameter set to appropriate values.
----End
When configuring the Ultra-Flash CSFB feature on the CME, perform a single configuration first, and
then perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
1. Configure a single object (such as a cell) on the CME.
Set parameters on the CME according to the operation sequence in Table 10-45. For
instructions on how to perform the CME single configuration, see CME Single
Configuration Operation Guide.
2. (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
10.12.4.6 Deactivation
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
10.12.7 Troubleshooting
N/A
10.13.3 Deployment
10.13.3.1 Requirements
Other Features
See 8.12 WRFD-171223 Fast Return to LTE for SRVCC User.
Hardware
None
License
For details about how to activate a license, see License Management Feature Parameter
Description.
If RAN Sharing or MOCN is enabled, the licensed value is allocated among the primary and
secondary operators according to the value of the License Allocation for Multiple
Operators parameter.
Other Requirements
l UE
– The UE must support both UMTS and LTE.
– If the handover-based fast return to LTE needs to be supported, the UE needs to
support UMTS-to-LTE handovers.
l CN
– To activate this feature, the MSC must carry the "UE history information" IE in the
Relocation Request message.
– If the handover-based fast return to LTE needs to be supported, the SGSN needs to
support UMTS-to-LTE handovers.
10.13.3.3 Activation
----End
//Enabling the function of fast return for UEs with only signaling connections
through SRVCC
SET UCORRMPARA:PerfEnhanceSwitch7=PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH-1;
//Setting the inter-RAT measurement duration of LTE cells for UEs with only
signaling connections
SET UU2LTEHONCOV:U2LTESigMeasTime=3;
//Setting the inter-RAT RSRP and RSRQ thresholds for UEs with only signaling
connections
SET UU2LTEHONCOV:SigTargetRatThdRSRP=36,SigTargetRatThdRSRQ=20;
//Setting the inter-RAT measurement duration of LTE cells for UEs
SET UU2LTEHONCOV:U2LTEMeasTime=5;
//Turning on the switch for handover- or redirection-based fast return to LTE
//(Optional) Turning on the switch for fast return to LTE based on PS handovers
SET UCORRMALGOSWITCH:HoSwitch1=HO_HANDOVER_FAST_RETURN_TO_LTE_SWITCH-1;
//(Optional) Turning on the switch for fast return to LTE based on redirections
SET UCORRMALGOSWITCH: HoSwitch1=HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SWITCH-1;
//(Optional) Triggering fast return to LTE upon AMR release for the first time
SET UCORRMPARA: PerfEnhanceSwitch7=PERFENH_FAST_RETURN_OPT_SWITCH-1;
//(Optional) Turning on the U2L connected-mode priority switch
SET UCORRMALGOSWITCH: HoSwitch1=HO_U2L_CONN_PRIO_SWITCH-1;
//(Optional) Configuring the priority of the connected-mode E-UTRA frequency (for
example, 5)
ADD UCELLNFREQPRIOINFO: CellId=1, EARFCN=1000, NPriority=5;
NOTE
When configuring the Ultra-Flash CSFB feature on the CME, perform a single configuration first, and
then perform a batch modification if required. Configure the parameters of a single object before a batch
modification. Perform a batch modification before logging out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
10.13.3.5 Deactivation
Step 2 Run the RNC MML command MOD UCELLHOCOMM and clear
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH under the FastReturnToLTESwitch
parameter to turn off the cell-level switch for Fast Return to LTE for SRVCC User.
Step 3 Run the RNC MML command SET UCORRMPARA and clear
PERFENH_CS_ONLY_MEAS_FAST_RETURN_SWITCH under the Performance
Enhance Switch 7 parameter to disable the function of fast return of UEs with only signaling
connections through SRVCC.
----End
Perform a single configuration first and then perform a batch modification if required. Configure the
parameters of a single object before a batch modification. Perform a batch modification before logging
out of the parameter setting interface.
To modify objects in batches, click on the CME to start the batch modification wizard.
For instructions on how to perform a batch modification through the CME batch modification
center, press F1 while running the wizard to obtain online help.
The SRVCC fast return handover preparation success rate and SRVCC fast return handover
success rate are calculated using the following formulas: SRVCC fast return handover
preparation success rate =
VS.U2LHO.FastReturn.SuccRelocPrepOutPS.SRVCCUE(BSC6900,BSC6910)/
VS.U2LHO.FastReturn.AttRelocPrepOutPS.SRVCCUE(BSC6900,BSC6910)
SRVCC fast return handover success rate =
VS.U2LHO.FastReturn.SuccOutPS.SRVCCUE(BSC6900,BSC6910)/
VS.U2LHO.FastReturn.AttOutPS.SRVCCUE(BSC6900,BSC6910)
This feature starts the LTE measurement after an SRVCC UE ends its voice service and the
RNC receives a Disconnect message from the UE or the MSC. The CS RAB has not been
released at this moment but may be abnormally released during the measurement. Therefore,
the value of the counter indicating the number of abnormal CS RAB releases may increase.
However, this type of CS RAB releases cannot be counted as call drops, because the UE has
ended the voice service when the coverage is normal. To assess the impact of this type of CS
RAB releases on the counter indicating the number of abnormal call drops, the
VS.RAB.AbnormRel.CS.Disconnect(BSC6900,BSC6910) counter is introduced.
10.13.6 Troubleshooting
N/A
11 Parameters
27)P2F_REDIRECT_CELLUPDT_RESEND_OPT_S
WITCH
Whether the RNC releases a UE's RRC connection
when the number of CELL UPDATE messages
retransmitted by the UE reaches the value of N302
minus one during a direct P2F-triggered redirection.
1: When this switch is set to on, the RNC releases the
UE's RRC connection only if the number of CELL
UPDATE messages retransmitted by the UE reaches
the value of N302.
0: When this switch is set to off, the RNC releases the
UE's RRC connection if the number of CELL
UPDATE messages retransmitted by the UE reaches
the value of N302 minus one.
28)RELOC_IN_PROCESS_OPT_SWITCH
Whether the RNC sends an intra-frequency
measurement control message in advance after the
incoming UE-not-involved relocation procedure is
complete.
1: When this switch is set to on, the RNC compares
the NAS synchronization flag used by the UE with
that sent by the CN. Both these two NAS
synchronization flags are contained in the
RELOCATION REQUEST message. If they are
consistent, the RNC does not send a RB
reconfiguration message to the UE. If they are
inconsistent, the RNC sends the UE a RB
reconfiguration message without the activation time,
notifying the UE of the NAS synchronization flag on
the CN side.
0: When this switch is set to off, the original
mechanism applies.
29)CU_ROUT_OPT_SWITCH
Whether the CELL UPDATE message over the Iur-p
interface is routed based on the SPUID of the
subsystem that manages the radio network temporary
identifier (RNTI) segment.
1: When this switch is set to on, the CELL UPDATE
message over the Iur-p interface is routed based on the
SPUID of the subsystem that manages the RNTI
segment.
0: When this switch is set to off, the original
mechanism applies.
30)RRC_REL_CROSS_DETACH_INIT_SWITCH
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH,
P2F_CU_CAUSE_CHG_OPT_SWITCH,
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWI
TCH, RELOC_IN_PROCESS_OPT_SWITCH,
CU_ROUT_OPT_SWITCH,
RRC_REL_CROSS_DETACH_INIT_SWITCH
Unit: None
Actual Value Range:
U2L_RELOC_MSG_TAKE_ERAB_SWITCH,
PS_DOMAIN_REL_RAB_SETUP_SWITCH,
PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH,
GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH,
D2P_TWO_SIDE_RLC_REEST_SWITCH,
D2F_SRNS_CONTEXT_REQ_OPT_SWITCH,
DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH,
DSP_CAP_JUDGE_SWITCH,
MPU_FC_USER_PLN_RSR_CHK_SWITCH,
RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH,
RB_RFG_MSG_USE_NEW_SG_SWITCH,
SRB3_SRB4_RLC_RST_RRC_REL_SWITCH,
WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_
SWITCH,
PS_0K_STATIC_RELOC_IN_CMP_SWITCH,
ADD_DRL_PS_0K_TO_8K_SWITCH,
CU_AL_RES_OPT_SWITCH,
DRNC_SERV_CELL_CHG_BUGFIX_SWITCH,
TRNC_TPC_INDEX_ALLOC_SWITCH,
IUR_ATM_TRAN_OPT_SWITCH,
RELOC_REQ_CIPHER_COMP_SWITCH,
STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITC
H,
RNC_IN_POOL_IU_RESET_SWITCH,
USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH,
RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWI
TCH,
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH,
P2F_CU_CAUSE_CHG_OPT_SWITCH,
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWI
TCH,
RELOC_IN_PROCESS_OPT_SWITCH,
CU_ROUT_OPT_SWITCH,
RRC_REL_CROSS_DETACH_INIT_SWITCH
Default Value:
U2L_RELOC_MSG_TAKE_ERAB_SWITCH:
0,PS_DOMAIN_REL_RAB_SETUP_SWITCH:
0,PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH:
0,GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH
:0,D2P_TWO_SIDE_RLC_REEST_SWITCH:
0,D2F_SRNS_CONTEXT_REQ_OPT_SWITCH:
0,DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH:
1,DSP_CAP_JUDGE_SWITCH:
1,MPU_FC_USER_PLN_RSR_CHK_SWITCH:
1,RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH:
0,RB_RFG_MSG_USE_NEW_SG_SWITCH:
0,SRB3_SRB4_RLC_RST_RRC_REL_SWITCH:
0,WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM
_SWITCH:
0,PS_0K_STATIC_RELOC_IN_CMP_SWITCH:
0,ADD_DRL_PS_0K_TO_8K_SWITCH:
0,CU_AL_RES_OPT_SWITCH:
0,DRNC_SERV_CELL_CHG_BUGFIX_SWITCH:
0,TRNC_TPC_INDEX_ALLOC_SWITCH:
0,IUR_ATM_TRAN_OPT_SWITCH:
0,RELOC_REQ_CIPHER_COMP_SWITCH:
0,STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWIT
CH:0,RNC_IN_POOL_IU_RESET_SWITCH:
1,USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH
:
1,RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_S
WITCH:
0,PS_U2L_USER_PLANE_DELAY_OPT_SWITCH:
0,P2F_CU_CAUSE_CHG_OPT_SWITCH:
0,P2F_REDIRECT_CELLUPDT_RESEND_OPT_S
WITCH:0,RELOC_IN_PROCESS_OPT_SWITCH:
0,CU_ROUT_OPT_SWITCH:
0,RRC_REL_CROSS_DETACH_INIT_SWITCH:0
25)PS_U2L_USER_PLANE_DELAY_OPT_SWITC
H
Whether interruption time of user-plane data
transmission is reduced during a U2L PS handover.
When this switch is set to on, the interruption time of
user-plane data transmission is reduced during a U2L
PS handover.
When this switch is set to off, the interruption time of
user-plane data transmission is not reduced during a
U2L PS handover.
26)P2F_CU_CAUSE_CHG_OPT_SWITCH
Whether the RNC optimizes the processing of the
CELL UPDATE message with a different cause that is
received while the RNC is expecting a response to the
CELL UPDATE CONFIRM message from the UE
during a P2F cell update.
When this switch is set to on, The RNC buffers the
CELL UPDATE message; the RNC determines that
the last cell update procedure is successful and
performs the processing accordingly.
When this switch is set to off, The RNC retransmits
the CELL UPDATE CONFIRM message to the UE in
the preceding scenario. The UE does not respond to
the message, and a call drop occurs.
27)P2F_REDIRECT_CELLUPDT_RESEND_OPT_S
WITCH
Whether the RNC releases a UE's RRC connection
when the number of CELL UPDATE messages
retransmitted by the UE reaches the value of N302
minus one during a direct P2F-triggered redirection.
1: When this switch is set to on, the RNC releases the
UE's RRC connection only if the number of CELL
UPDATE messages retransmitted by the UE reaches
the value of N302.
0: When this switch is set to off, the RNC releases the
UE's RRC connection if the number of CELL
UPDATE messages retransmitted by the UE reaches
the value of N302 minus one.
28)RELOC_IN_PROCESS_OPT_SWITCH
Whether the RNC sends an intra-frequency
measurement control message in advance after the
incoming UE-not-involved relocation procedure is
complete.
1: When this switch is set to on, the RNC compares
the NAS synchronization flag used by the UE with
PS_DOMAIN_REL_RAB_SETUP_SWITCH,
PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH,
GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH,
D2P_TWO_SIDE_RLC_REEST_SWITCH,
D2F_SRNS_CONTEXT_REQ_OPT_SWITCH,
DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH,
DSP_CAP_JUDGE_SWITCH,
MPU_FC_USER_PLN_RSR_CHK_SWITCH,
RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH,
RB_RFG_MSG_USE_NEW_SG_SWITCH,
SRB3_SRB4_RLC_RST_RRC_REL_SWITCH,
WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_
SWITCH,
PS_0K_STATIC_RELOC_IN_CMP_SWITCH,
ADD_DRL_PS_0K_TO_8K_SWITCH,
CU_AL_RES_OPT_SWITCH,
DRNC_SERV_CELL_CHG_BUGFIX_SWITCH,
TRNC_TPC_INDEX_ALLOC_SWITCH,
IUR_ATM_TRAN_OPT_SWITCH,
RELOC_REQ_CIPHER_COMP_SWITCH,
STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITC
H, RNC_IN_POOL_IU_RESET_SWITCH,
USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH,
RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWI
TCH,
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH,
P2F_CU_CAUSE_CHG_OPT_SWITCH,
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWI
TCH, RELOC_IN_PROCESS_OPT_SWITCH,
CU_ROUT_OPT_SWITCH,
RRC_REL_CROSS_DETACH_INIT_SWITCH
Unit: None
Actual Value Range:
U2L_RELOC_MSG_TAKE_ERAB_SWITCH,
PS_DOMAIN_REL_RAB_SETUP_SWITCH,
PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH,
GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH,
D2P_TWO_SIDE_RLC_REEST_SWITCH,
D2F_SRNS_CONTEXT_REQ_OPT_SWITCH,
DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH,
DSP_CAP_JUDGE_SWITCH,
MPU_FC_USER_PLN_RSR_CHK_SWITCH,
RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH,
RB_RFG_MSG_USE_NEW_SG_SWITCH,
SRB3_SRB4_RLC_RST_RRC_REL_SWITCH,
WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM_
SWITCH,
PS_0K_STATIC_RELOC_IN_CMP_SWITCH,
ADD_DRL_PS_0K_TO_8K_SWITCH,
CU_AL_RES_OPT_SWITCH,
DRNC_SERV_CELL_CHG_BUGFIX_SWITCH,
TRNC_TPC_INDEX_ALLOC_SWITCH,
IUR_ATM_TRAN_OPT_SWITCH,
RELOC_REQ_CIPHER_COMP_SWITCH,
STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWITC
H,
RNC_IN_POOL_IU_RESET_SWITCH,
USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH,
RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_SWI
TCH,
PS_U2L_USER_PLANE_DELAY_OPT_SWITCH,
P2F_CU_CAUSE_CHG_OPT_SWITCH,
P2F_REDIRECT_CELLUPDT_RESEND_OPT_SWI
TCH,
RELOC_IN_PROCESS_OPT_SWITCH,
CU_ROUT_OPT_SWITCH,
RRC_REL_CROSS_DETACH_INIT_SWITCH
Default Value:
U2L_RELOC_MSG_TAKE_ERAB_SWITCH:
0,PS_DOMAIN_REL_RAB_SETUP_SWITCH:
0,PCH2FACH_PS_TRAFFIC_PFM_FIX_SWITCH:
0,GSM_SYS_HO_IN_NO_UE_CAP_ENQ_SWITCH
:0,D2P_TWO_SIDE_RLC_REEST_SWITCH:
0,D2F_SRNS_CONTEXT_REQ_OPT_SWITCH:
0,DL_SIG_TRS_REQ_REL_UE_PRO_SWITCH:
1,DSP_CAP_JUDGE_SWITCH:
1,MPU_FC_USER_PLN_RSR_CHK_SWITCH:
1,RB_CU_FAIL_RRC_REL_CELL_OPT_SWITCH:
0,RB_RFG_MSG_USE_NEW_SG_SWITCH:
0,SRB3_SRB4_RLC_RST_RRC_REL_SWITCH:
0,WEAK_COV_NO_EXT_CS_RAB_SET_ACT_TM
_SWITCH:
0,PS_0K_STATIC_RELOC_IN_CMP_SWITCH:
0,ADD_DRL_PS_0K_TO_8K_SWITCH:
0,CU_AL_RES_OPT_SWITCH:
0,DRNC_SERV_CELL_CHG_BUGFIX_SWITCH:
0,TRNC_TPC_INDEX_ALLOC_SWITCH:
0,IUR_ATM_TRAN_OPT_SWITCH:
0,RELOC_REQ_CIPHER_COMP_SWITCH:
0,STATIC_RELOC_FAIL_DRNC_CLR_RSR_SWIT
CH:0,RNC_IN_POOL_IU_RESET_SWITCH:
1,USE_EFD_WITHOUT_EFD_OFF_TAC_SWITCH
:
1,RAB_MOD_IUPS_ADMIFAIL_GTPU_REEST_S
WITCH:
0,PS_U2L_USER_PLANE_DELAY_OPT_SWITCH:
0,P2F_CU_CAUSE_CHG_OPT_SWITCH:
0,P2F_REDIRECT_CELLUPDT_RESEND_OPT_S
WITCH:0,RELOC_IN_PROCESS_OPT_SWITCH:
0,CU_ROUT_OPT_SWITCH:
0,RRC_REL_CROSS_DETACH_INIT_SWITCH:0
RESERVED_SWITCH_12_BIT4,
RESERVED_SWITCH_12_BIT5,
RESERVED_SWITCH_12_BIT6,
RESERVED_SWITCH_12_BIT7,
RESERVED_SWITCH_12_BIT8,
RESERVED_SWITCH_12_BIT9,
RESERVED_SWITCH_12_BIT10,
RESERVED_SWITCH_12_BIT11,
RESERVED_SWITCH_12_BIT12,
RESERVED_SWITCH_12_BIT13,
RESERVED_SWITCH_12_BIT14,
RESERVED_SWITCH_12_BIT15,
RESERVED_SWITCH_12_BIT16,
RESERVED_SWITCH_12_BIT17,
RESERVED_SWITCH_12_BIT18,
RESERVED_SWITCH_12_BIT19,
RESERVED_SWITCH_12_BIT20,
RESERVED_SWITCH_12_BIT21,
RESERVED_SWITCH_12_BIT22,
RESERVED_SWITCH_12_BIT23,
RESERVED_SWITCH_12_BIT24,
RESERVED_SWITCH_12_BIT25,
RESERVED_SWITCH_12_BIT26,
RESERVED_SWITCH_12_BIT27,
RESERVED_SWITCH_12_BIT28,
RESERVED_SWITCH_12_BIT29,
RESERVED_SWITCH_12_BIT30,
RESERVED_SWITCH_12_BIT31,
RESERVED_SWITCH_12_BIT32
Default Value:
RESERVED_SWITCH_12_BIT1:0,RESERVED_SW
ITCH_12_BIT2:0,RESERVED_SWITCH_12_BIT3:0
,RESERVED_SWITCH_12_BIT4:0,RESERVED_SW
ITCH_12_BIT5:0,RESERVED_SWITCH_12_BIT6:0
,RESERVED_SWITCH_12_BIT7:0,RESERVED_SW
ITCH_12_BIT8:0,RESERVED_SWITCH_12_BIT9:0
,RESERVED_SWITCH_12_BIT10:0,RESERVED_S
WITCH_12_BIT11:0,RESERVED_SWITCH_12_BIT
12:0,RESERVED_SWITCH_12_BIT13:0,RESERVE
D_SWITCH_12_BIT14:0,RESERVED_SWITCH_12
_BIT15:0,RESERVED_SWITCH_12_BIT16:0,RESE
RVED_SWITCH_12_BIT17:0,RESERVED_SWITC
H_12_BIT18:0,RESERVED_SWITCH_12_BIT19:0,
RESERVED_SWITCH_12_BIT20:0,RESERVED_S
WITCH_12_BIT21:0,RESERVED_SWITCH_12_BI
T22:0,RESERVED_SWITCH_12_BIT23:0,RESERV
ED_SWITCH_12_BIT24:0,RESERVED_SWITCH_1
2_BIT25:0,RESERVED_SWITCH_12_BIT26:0,RES
ERVED_SWITCH_12_BIT27:0,RESERVED_SWITC
H_12_BIT28:0,RESERVED_SWITCH_12_BIT29:0,
RESERVED_SWITCH_12_BIT30:0,RESERVED_S
WITCH_12_BIT31:0,RESERVED_SWITCH_12_BI
T32:0
RESERVED_SWITCH_12_BIT4,
RESERVED_SWITCH_12_BIT5,
RESERVED_SWITCH_12_BIT6,
RESERVED_SWITCH_12_BIT7,
RESERVED_SWITCH_12_BIT8,
RESERVED_SWITCH_12_BIT9,
RESERVED_SWITCH_12_BIT10,
RESERVED_SWITCH_12_BIT11,
RESERVED_SWITCH_12_BIT12,
RESERVED_SWITCH_12_BIT13,
RESERVED_SWITCH_12_BIT14,
RESERVED_SWITCH_12_BIT15,
RESERVED_SWITCH_12_BIT16,
RESERVED_SWITCH_12_BIT17,
RESERVED_SWITCH_12_BIT18,
RESERVED_SWITCH_12_BIT19,
RESERVED_SWITCH_12_BIT20,
RESERVED_SWITCH_12_BIT21,
RESERVED_SWITCH_12_BIT22,
RESERVED_SWITCH_12_BIT23,
RESERVED_SWITCH_12_BIT24,
RESERVED_SWITCH_12_BIT25,
RESERVED_SWITCH_12_BIT26,
RESERVED_SWITCH_12_BIT27,
RESERVED_SWITCH_12_BIT28,
RESERVED_SWITCH_12_BIT29,
RESERVED_SWITCH_12_BIT30,
RESERVED_SWITCH_12_BIT31,
RESERVED_SWITCH_12_BIT32
Default Value:
RESERVED_SWITCH_12_BIT1:0,RESERVED_SW
ITCH_12_BIT2:0,RESERVED_SWITCH_12_BIT3:0
,RESERVED_SWITCH_12_BIT4:0,RESERVED_SW
ITCH_12_BIT5:0,RESERVED_SWITCH_12_BIT6:0
,RESERVED_SWITCH_12_BIT7:0,RESERVED_SW
ITCH_12_BIT8:0,RESERVED_SWITCH_12_BIT9:0
,RESERVED_SWITCH_12_BIT10:0,RESERVED_S
WITCH_12_BIT11:0,RESERVED_SWITCH_12_BIT
12:0,RESERVED_SWITCH_12_BIT13:0,RESERVE
D_SWITCH_12_BIT14:0,RESERVED_SWITCH_12
_BIT15:0,RESERVED_SWITCH_12_BIT16:0,RESE
RVED_SWITCH_12_BIT17:0,RESERVED_SWITC
H_12_BIT18:0,RESERVED_SWITCH_12_BIT19:0,
RESERVED_SWITCH_12_BIT20:0,RESERVED_S
WITCH_12_BIT21:0,RESERVED_SWITCH_12_BI
T22:0,RESERVED_SWITCH_12_BIT23:0,RESERV
ED_SWITCH_12_BIT24:0,RESERVED_SWITCH_1
2_BIT25:0,RESERVED_SWITCH_12_BIT26:0,RES
ERVED_SWITCH_12_BIT27:0,RESERVED_SWITC
H_12_BIT28:0,RESERVED_SWITCH_12_BIT29:0,
RESERVED_SWITCH_12_BIT30:0,RESERVED_S
WITCH_12_BIT31:0,RESERVED_SWITCH_12_BI
T32:0
RsvSwit BSC690 SET None None Meaning: RRM algorithm reserved switch parameter
ch19 0 UALGO 19. The 32-bit parameter is reserved for further
RSVPA change request use.
RA GUI Value Range: RESERVED_SWITCH_19_BIT1,
RESERVED_SWITCH_19_BIT2,
RESERVED_SWITCH_19_BIT3,
RESERVED_SWITCH_19_BIT4,
RESERVED_SWITCH_19_BIT5,
RESERVED_SWITCH_19_BIT6,
RESERVED_SWITCH_19_BIT7,
RESERVED_SWITCH_19_BIT8,
RESERVED_SWITCH_19_BIT9,
RESERVED_SWITCH_19_BIT10,
RESERVED_SWITCH_19_BIT11,
RESERVED_SWITCH_19_BIT12,
RESERVED_SWITCH_19_BIT13,
RESERVED_SWITCH_19_BIT14,
RESERVED_SWITCH_19_BIT15,
RESERVED_SWITCH_19_BIT16,
RESERVED_SWITCH_19_BIT17,
RESERVED_SWITCH_19_BIT18,
RESERVED_SWITCH_19_BIT19,
RESERVED_SWITCH_19_BIT20,
RESERVED_SWITCH_19_BIT21,
RESERVED_SWITCH_19_BIT22,
RESERVED_SWITCH_19_BIT23,
RESERVED_SWITCH_19_BIT24,
RESERVED_SWITCH_19_BIT25,
RESERVED_SWITCH_19_BIT26,
RESERVED_SWITCH_19_BIT27,
RESERVED_SWITCH_19_BIT28,
RESERVED_SWITCH_19_BIT29,
RESERVED_SWITCH_19_BIT30,
RESERVED_SWITCH_19_BIT31,
RESERVED_SWITCH_19_BIT32
Unit: None
Actual Value Range:
RESERVED_SWITCH_19_BIT1,
RESERVED_SWITCH_19_BIT2,
RESERVED_SWITCH_19_BIT3,
RESERVED_SWITCH_19_BIT4,
RESERVED_SWITCH_19_BIT5,
RESERVED_SWITCH_19_BIT6,
RESERVED_SWITCH_19_BIT7,
RESERVED_SWITCH_19_BIT8,
RESERVED_SWITCH_19_BIT9,
RESERVED_SWITCH_19_BIT10,
RESERVED_SWITCH_19_BIT11,
RESERVED_SWITCH_19_BIT12,
RESERVED_SWITCH_19_BIT13,
RESERVED_SWITCH_19_BIT14,
RESERVED_SWITCH_19_BIT15,
RESERVED_SWITCH_19_BIT16,
RESERVED_SWITCH_19_BIT17,
RESERVED_SWITCH_19_BIT18,
RESERVED_SWITCH_19_BIT19,
RESERVED_SWITCH_19_BIT20,
RESERVED_SWITCH_19_BIT21,
RESERVED_SWITCH_19_BIT22,
RESERVED_SWITCH_19_BIT23,
RESERVED_SWITCH_19_BIT24,
RESERVED_SWITCH_19_BIT25,
RESERVED_SWITCH_19_BIT26,
RESERVED_SWITCH_19_BIT27,
RESERVED_SWITCH_19_BIT28,
RESERVED_SWITCH_19_BIT29,
RESERVED_SWITCH_19_BIT30,
RESERVED_SWITCH_19_BIT31,
RESERVED_SWITCH_19_BIT32
Default Value: RESERVED_SWITCH_19_BIT1:0,
RESERVED_SWITCH_19_BIT2:0,
RESERVED_SWITCH_19_BIT3:0,
RESERVED_SWITCH_19_BIT4:0,
RESERVED_SWITCH_19_BIT5:0,
RESERVED_SWITCH_19_BIT6:0,
RESERVED_SWITCH_19_BIT7:0,
RESERVED_SWITCH_19_BIT8:0,
RESERVED_SWITCH_19_BIT9:0,
RESERVED_SWITCH_19_BIT10:0,
RESERVED_SWITCH_19_BIT11:0,
RESERVED_SWITCH_19_BIT12:0,
RESERVED_SWITCH_19_BIT13:0,
RESERVED_SWITCH_19_BIT14:0,
RESERVED_SWITCH_19_BIT15:0,
RESERVED_SWITCH_19_BIT16:0,
RESERVED_SWITCH_19_BIT17:0,
RESERVED_SWITCH_19_BIT18:0,
RESERVED_SWITCH_19_BIT19:0,
RESERVED_SWITCH_19_BIT20:0,
RESERVED_SWITCH_19_BIT21:0,
RESERVED_SWITCH_19_BIT22:0,
RESERVED_SWITCH_19_BIT23:0,
RESERVED_SWITCH_19_BIT24:0,
RESERVED_SWITCH_19_BIT25:0,
RESERVED_SWITCH_19_BIT26:0,
RESERVED_SWITCH_19_BIT27:0,
RESERVED_SWITCH_19_BIT28:0,
RESERVED_SWITCH_19_BIT29:0,
RESERVED_SWITCH_19_BIT30:0,
RESERVED_SWITCH_19_BIT31:0,
RESERVED_SWITCH_19_BIT32:0
RsvSwit BSC691 SET None None Meaning: RRM algorithm reserved switch parameter
ch19 0 UALGO 19. The 32-bit parameter is reserved for further
RSVPA change request use.
RA GUI Value Range: RESERVED_SWITCH_19_BIT1,
RESERVED_SWITCH_19_BIT2,
RESERVED_SWITCH_19_BIT3,
RESERVED_SWITCH_19_BIT4,
RESERVED_SWITCH_19_BIT5,
RESERVED_SWITCH_19_BIT6,
RESERVED_SWITCH_19_BIT7,
RESERVED_SWITCH_19_BIT8,
RESERVED_SWITCH_19_BIT9,
RESERVED_SWITCH_19_BIT10,
RESERVED_SWITCH_19_BIT11,
RESERVED_SWITCH_19_BIT12,
RESERVED_SWITCH_19_BIT13,
RESERVED_SWITCH_19_BIT14,
RESERVED_SWITCH_19_BIT15,
RESERVED_SWITCH_19_BIT16,
RESERVED_SWITCH_19_BIT17,
RESERVED_SWITCH_19_BIT18,
RESERVED_SWITCH_19_BIT19,
RESERVED_SWITCH_19_BIT20,
RESERVED_SWITCH_19_BIT21,
RESERVED_SWITCH_19_BIT22,
RESERVED_SWITCH_19_BIT23,
RESERVED_SWITCH_19_BIT24,
RESERVED_SWITCH_19_BIT25,
RESERVED_SWITCH_19_BIT26,
RESERVED_SWITCH_19_BIT27,
RESERVED_SWITCH_19_BIT28,
RESERVED_SWITCH_19_BIT29,
RESERVED_SWITCH_19_BIT30,
RESERVED_SWITCH_19_BIT31,
RESERVED_SWITCH_19_BIT32
Unit: None
Actual Value Range:
RESERVED_SWITCH_19_BIT1,
RESERVED_SWITCH_19_BIT2,
RESERVED_SWITCH_19_BIT3,
RESERVED_SWITCH_19_BIT4,
RESERVED_SWITCH_19_BIT5,
RESERVED_SWITCH_19_BIT6,
RESERVED_SWITCH_19_BIT7,
RESERVED_SWITCH_19_BIT8,
RESERVED_SWITCH_19_BIT9,
RESERVED_SWITCH_19_BIT10,
RESERVED_SWITCH_19_BIT11,
RESERVED_SWITCH_19_BIT12,
RESERVED_SWITCH_19_BIT13,
RESERVED_SWITCH_19_BIT14,
RESERVED_SWITCH_19_BIT15,
RESERVED_SWITCH_19_BIT16,
RESERVED_SWITCH_19_BIT17,
RESERVED_SWITCH_19_BIT18,
RESERVED_SWITCH_19_BIT19,
RESERVED_SWITCH_19_BIT20,
RESERVED_SWITCH_19_BIT21,
RESERVED_SWITCH_19_BIT22,
RESERVED_SWITCH_19_BIT23,
RESERVED_SWITCH_19_BIT24,
RESERVED_SWITCH_19_BIT25,
RESERVED_SWITCH_19_BIT26,
RESERVED_SWITCH_19_BIT27,
RESERVED_SWITCH_19_BIT28,
RESERVED_SWITCH_19_BIT29,
RESERVED_SWITCH_19_BIT30,
RESERVED_SWITCH_19_BIT31,
RESERVED_SWITCH_19_BIT32
Default Value: RESERVED_SWITCH_19_BIT1:0,
RESERVED_SWITCH_19_BIT2:0,
RESERVED_SWITCH_19_BIT3:0,
RESERVED_SWITCH_19_BIT4:0,
RESERVED_SWITCH_19_BIT5:0,
RESERVED_SWITCH_19_BIT6:0,
RESERVED_SWITCH_19_BIT7:0,
RESERVED_SWITCH_19_BIT8:0,
RESERVED_SWITCH_19_BIT9:0,
RESERVED_SWITCH_19_BIT10:0,
RESERVED_SWITCH_19_BIT11:0,
RESERVED_SWITCH_19_BIT12:0,
RESERVED_SWITCH_19_BIT13:0,
RESERVED_SWITCH_19_BIT14:0,
RESERVED_SWITCH_19_BIT15:0,
RESERVED_SWITCH_19_BIT16:0,
RESERVED_SWITCH_19_BIT17:0,
RESERVED_SWITCH_19_BIT18:0,
RESERVED_SWITCH_19_BIT19:0,
RESERVED_SWITCH_19_BIT20:0,
RESERVED_SWITCH_19_BIT21:0,
RESERVED_SWITCH_19_BIT22:0,
RESERVED_SWITCH_19_BIT23:0,
RESERVED_SWITCH_19_BIT24:0,
RESERVED_SWITCH_19_BIT25:0,
RESERVED_SWITCH_19_BIT26:0,
RESERVED_SWITCH_19_BIT27:0,
RESERVED_SWITCH_19_BIT28:0,
RESERVED_SWITCH_19_BIT29:0,
RESERVED_SWITCH_19_BIT30:0,
RESERVED_SWITCH_19_BIT31:0,
RESERVED_SWITCH_19_BIT32:0
RESERVED_SWITCH_11_BIT4,
RESERVED_SWITCH_11_BIT5,
RESERVED_SWITCH_11_BIT6,
RESERVED_SWITCH_11_BIT7,
RESERVED_SWITCH_11_BIT8,
RESERVED_SWITCH_11_BIT9,
RESERVED_SWITCH_11_BIT10,
RESERVED_SWITCH_11_BIT11,
RESERVED_SWITCH_11_BIT12,
RESERVED_SWITCH_11_BIT13,
RESERVED_SWITCH_11_BIT14,
RESERVED_SWITCH_11_BIT15,
RESERVED_SWITCH_11_BIT16,
RESERVED_SWITCH_11_BIT17,
RESERVED_SWITCH_11_BIT18,
RESERVED_SWITCH_11_BIT19,
RESERVED_SWITCH_11_BIT20,
RESERVED_SWITCH_11_BIT21,
RESERVED_SWITCH_11_BIT22,
RESERVED_SWITCH_11_BIT23,
RESERVED_SWITCH_11_BIT24,
RESERVED_SWITCH_11_BIT25,
RESERVED_SWITCH_11_BIT26,
RESERVED_SWITCH_11_BIT27,
RESERVED_SWITCH_11_BIT28,
RESERVED_SWITCH_11_BIT29,
RESERVED_SWITCH_11_BIT30,
RESERVED_SWITCH_11_BIT31,
RESERVED_SWITCH_11_BIT32
Default Value:
RESERVED_SWITCH_11_BIT1:0,RESERVED_SW
ITCH_11_BIT2:0,RESERVED_SWITCH_11_BIT3:0
,RESERVED_SWITCH_11_BIT4:0,RESERVED_SW
ITCH_11_BIT5:0,RESERVED_SWITCH_11_BIT6:0
,RESERVED_SWITCH_11_BIT7:0,RESERVED_SW
ITCH_11_BIT8:0,RESERVED_SWITCH_11_BIT9:0
,RESERVED_SWITCH_11_BIT10:0,RESERVED_S
WITCH_11_BIT11:0,RESERVED_SWITCH_11_BIT
12:0,RESERVED_SWITCH_11_BIT13:0,RESERVE
D_SWITCH_11_BIT14:0,RESERVED_SWITCH_11
_BIT15:0,RESERVED_SWITCH_11_BIT16:0,RESE
RVED_SWITCH_11_BIT17:0,RESERVED_SWITC
H_11_BIT18:0,RESERVED_SWITCH_11_BIT19:0,
RESERVED_SWITCH_11_BIT20:0,RESERVED_S
WITCH_11_BIT21:0,RESERVED_SWITCH_11_BIT
22:0,RESERVED_SWITCH_11_BIT23:0,RESERVE
D_SWITCH_11_BIT24:0,RESERVED_SWITCH_11
_BIT25:0,RESERVED_SWITCH_11_BIT26:0,RESE
RVED_SWITCH_11_BIT27:0,RESERVED_SWITC
H_11_BIT28:0,RESERVED_SWITCH_11_BIT29:0,
RESERVED_SWITCH_11_BIT30:0,RESERVED_S
WITCH_11_BIT31:0,RESERVED_SWITCH_11_BIT
32:0
RESERVED_SWITCH_11_BIT4,
RESERVED_SWITCH_11_BIT5,
RESERVED_SWITCH_11_BIT6,
RESERVED_SWITCH_11_BIT7,
RESERVED_SWITCH_11_BIT8,
RESERVED_SWITCH_11_BIT9,
RESERVED_SWITCH_11_BIT10,
RESERVED_SWITCH_11_BIT11,
RESERVED_SWITCH_11_BIT12,
RESERVED_SWITCH_11_BIT13,
RESERVED_SWITCH_11_BIT14,
RESERVED_SWITCH_11_BIT15,
RESERVED_SWITCH_11_BIT16,
RESERVED_SWITCH_11_BIT17,
RESERVED_SWITCH_11_BIT18,
RESERVED_SWITCH_11_BIT19,
RESERVED_SWITCH_11_BIT20,
RESERVED_SWITCH_11_BIT21,
RESERVED_SWITCH_11_BIT22,
RESERVED_SWITCH_11_BIT23,
RESERVED_SWITCH_11_BIT24,
RESERVED_SWITCH_11_BIT25,
RESERVED_SWITCH_11_BIT26,
RESERVED_SWITCH_11_BIT27,
RESERVED_SWITCH_11_BIT28,
RESERVED_SWITCH_11_BIT29,
RESERVED_SWITCH_11_BIT30,
RESERVED_SWITCH_11_BIT31,
RESERVED_SWITCH_11_BIT32
Default Value:
RESERVED_SWITCH_11_BIT1:0,RESERVED_SW
ITCH_11_BIT2:0,RESERVED_SWITCH_11_BIT3:0
,RESERVED_SWITCH_11_BIT4:0,RESERVED_SW
ITCH_11_BIT5:0,RESERVED_SWITCH_11_BIT6:0
,RESERVED_SWITCH_11_BIT7:0,RESERVED_SW
ITCH_11_BIT8:0,RESERVED_SWITCH_11_BIT9:0
,RESERVED_SWITCH_11_BIT10:0,RESERVED_S
WITCH_11_BIT11:0,RESERVED_SWITCH_11_BIT
12:0,RESERVED_SWITCH_11_BIT13:0,RESERVE
D_SWITCH_11_BIT14:0,RESERVED_SWITCH_11
_BIT15:0,RESERVED_SWITCH_11_BIT16:0,RESE
RVED_SWITCH_11_BIT17:0,RESERVED_SWITC
H_11_BIT18:0,RESERVED_SWITCH_11_BIT19:0,
RESERVED_SWITCH_11_BIT20:0,RESERVED_S
WITCH_11_BIT21:0,RESERVED_SWITCH_11_BIT
22:0,RESERVED_SWITCH_11_BIT23:0,RESERVE
D_SWITCH_11_BIT24:0,RESERVED_SWITCH_11
_BIT25:0,RESERVED_SWITCH_11_BIT26:0,RESE
RVED_SWITCH_11_BIT27:0,RESERVED_SWITC
H_11_BIT28:0,RESERVED_SWITCH_11_BIT29:0,
RESERVED_SWITCH_11_BIT30:0,RESERVED_S
WITCH_11_BIT31:0,RESERVED_SWITCH_11_BIT
32:0
RESERVED_SWITCH_17_BIT4,
RESERVED_SWITCH_17_BIT5,
RESERVED_SWITCH_17_BIT6,
RESERVED_SWITCH_17_BIT7,
RESERVED_SWITCH_17_BIT8,
RESERVED_SWITCH_17_BIT9,
RESERVED_SWITCH_17_BIT10,
RESERVED_SWITCH_17_BIT11,
RESERVED_SWITCH_17_BIT12,
RESERVED_SWITCH_17_BIT13,
RESERVED_SWITCH_17_BIT14,
RESERVED_SWITCH_17_BIT15,
RESERVED_SWITCH_17_BIT16,
RESERVED_SWITCH_17_BIT17,
RESERVED_SWITCH_17_BIT18,
RESERVED_SWITCH_17_BIT19,
RESERVED_SWITCH_17_BIT20,
RESERVED_SWITCH_17_BIT21,
RESERVED_SWITCH_17_BIT22,
RESERVED_SWITCH_17_BIT23,
RESERVED_SWITCH_17_BIT24,
RESERVED_SWITCH_17_BIT25,
RESERVED_SWITCH_17_BIT26,
RESERVED_SWITCH_17_BIT27,
RESERVED_SWITCH_17_BIT28,
RESERVED_SWITCH_17_BIT29,
RESERVED_SWITCH_17_BIT30,
RESERVED_SWITCH_17_BIT31,
RESERVED_SWITCH_17_BIT32
Default Value: RESERVED_SWITCH_17_BIT1:0,
RESERVED_SWITCH_17_BIT2:0,
RESERVED_SWITCH_17_BIT3:0,
RESERVED_SWITCH_17_BIT4:0,
RESERVED_SWITCH_17_BIT5:0,
RESERVED_SWITCH_17_BIT6:0,
RESERVED_SWITCH_17_BIT7:0,
RESERVED_SWITCH_17_BIT8:0,
RESERVED_SWITCH_17_BIT9:0,
RESERVED_SWITCH_17_BIT10:0,
RESERVED_SWITCH_17_BIT11:0,
RESERVED_SWITCH_17_BIT12:0,
RESERVED_SWITCH_17_BIT13:0,
RESERVED_SWITCH_17_BIT14:0,
RESERVED_SWITCH_17_BIT15:0,
RESERVED_SWITCH_17_BIT16:0,
RESERVED_SWITCH_17_BIT17:0,
RESERVED_SWITCH_17_BIT18:0,
RESERVED_SWITCH_17_BIT19:0,
RESERVED_SWITCH_17_BIT20:0,
RESERVED_SWITCH_17_BIT21:0,
RESERVED_SWITCH_17_BIT22:0,
RESERVED_SWITCH_17_BIT23:0,
RESERVED_SWITCH_17_BIT24:0,
RESERVED_SWITCH_17_BIT25:0,
RESERVED_SWITCH_17_BIT26:0,
RESERVED_SWITCH_17_BIT27:0,
RESERVED_SWITCH_17_BIT28:0,
RESERVED_SWITCH_17_BIT29:0,
RESERVED_SWITCH_17_BIT30:0,
RESERVED_SWITCH_17_BIT31:0,
RESERVED_SWITCH_17_BIT32:0
RESERVED_SWITCH_17_BIT4,
RESERVED_SWITCH_17_BIT5,
RESERVED_SWITCH_17_BIT6,
RESERVED_SWITCH_17_BIT7,
RESERVED_SWITCH_17_BIT8,
RESERVED_SWITCH_17_BIT9,
RESERVED_SWITCH_17_BIT10,
RESERVED_SWITCH_17_BIT11,
RESERVED_SWITCH_17_BIT12,
RESERVED_SWITCH_17_BIT13,
RESERVED_SWITCH_17_BIT14,
RESERVED_SWITCH_17_BIT15,
RESERVED_SWITCH_17_BIT16,
RESERVED_SWITCH_17_BIT17,
RESERVED_SWITCH_17_BIT18,
RESERVED_SWITCH_17_BIT19,
RESERVED_SWITCH_17_BIT20,
RESERVED_SWITCH_17_BIT21,
RESERVED_SWITCH_17_BIT22,
RESERVED_SWITCH_17_BIT23,
RESERVED_SWITCH_17_BIT24,
RESERVED_SWITCH_17_BIT25,
RESERVED_SWITCH_17_BIT26,
RESERVED_SWITCH_17_BIT27,
RESERVED_SWITCH_17_BIT28,
RESERVED_SWITCH_17_BIT29,
RESERVED_SWITCH_17_BIT30,
RESERVED_SWITCH_17_BIT31,
RESERVED_SWITCH_17_BIT32
Default Value: RESERVED_SWITCH_17_BIT1:0,
RESERVED_SWITCH_17_BIT2:0,
RESERVED_SWITCH_17_BIT3:0,
RESERVED_SWITCH_17_BIT4:0,
RESERVED_SWITCH_17_BIT5:0,
RESERVED_SWITCH_17_BIT6:0,
RESERVED_SWITCH_17_BIT7:0,
RESERVED_SWITCH_17_BIT8:0,
RESERVED_SWITCH_17_BIT9:0,
RESERVED_SWITCH_17_BIT10:0,
RESERVED_SWITCH_17_BIT11:0,
RESERVED_SWITCH_17_BIT12:0,
RESERVED_SWITCH_17_BIT13:0,
RESERVED_SWITCH_17_BIT14:0,
RESERVED_SWITCH_17_BIT15:0,
RESERVED_SWITCH_17_BIT16:0,
RESERVED_SWITCH_17_BIT17:0,
RESERVED_SWITCH_17_BIT18:0,
RESERVED_SWITCH_17_BIT19:0,
RESERVED_SWITCH_17_BIT20:0,
RESERVED_SWITCH_17_BIT21:0,
RESERVED_SWITCH_17_BIT22:0,
RESERVED_SWITCH_17_BIT23:0,
RESERVED_SWITCH_17_BIT24:0,
RESERVED_SWITCH_17_BIT25:0,
RESERVED_SWITCH_17_BIT26:0,
RESERVED_SWITCH_17_BIT27:0,
RESERVED_SWITCH_17_BIT28:0,
RESERVED_SWITCH_17_BIT29:0,
RESERVED_SWITCH_17_BIT30:0,
RESERVED_SWITCH_17_BIT31:0,
RESERVED_SWITCH_17_BIT32:0
RESERVED_SWITCH_0_BIT6,
RESERVED_SWITCH_0_BIT7,
RESERVED_SWITCH_0_BIT8,
RESERVED_SWITCH_0_BIT9,
RESERVED_SWITCH_0_BIT10,
RESERVED_SWITCH_0_BIT11,
RESERVED_SWITCH_0_BIT12,
RESERVED_SWITCH_0_BIT13,
RESERVED_SWITCH_0_BIT14,
RESERVED_SWITCH_0_BIT15,
RESERVED_SWITCH_0_BIT16,
RESERVED_SWITCH_0_BIT17,
RESERVED_SWITCH_0_BIT18,
RESERVED_SWITCH_0_BIT19,
RESERVED_SWITCH_0_BIT20,
RESERVED_SWITCH_0_BIT21,
RESERVED_SWITCH_0_BIT22,
RESERVED_SWITCH_0_BIT23,
RESERVED_SWITCH_0_BIT24,
RESERVED_SWITCH_0_BIT25,
RESERVED_SWITCH_0_BIT26,
RESERVED_SWITCH_0_BIT27,
RESERVED_SWITCH_0_BIT28,
RESERVED_SWITCH_0_BIT29,
RESERVED_SWITCH_0_BIT30,
RESERVED_SWITCH_0_BIT31,
RESERVED_SWITCH_0_BIT32
Default Value:
RESERVED_SWITCH_0_BIT1:0,RESERVED_SWI
TCH_0_BIT2:0,RESERVED_SWITCH_0_BIT3:0,R
ESERVED_SWITCH_0_BIT4:0,RESERVED_SWIT
CH_0_BIT5:0,RESERVED_SWITCH_0_BIT6:0,RES
ERVED_SWITCH_0_BIT7:0,RESERVED_SWITCH
_0_BIT8:0,RESERVED_SWITCH_0_BIT9:0,RESER
VED_SWITCH_0_BIT10:0,RESERVED_SWITCH_
0_BIT11:0,RESERVED_SWITCH_0_BIT12:0,RESE
RVED_SWITCH_0_BIT13:0,RESERVED_SWITCH
_0_BIT14:0,RESERVED_SWITCH_0_BIT15:0,RES
ERVED_SWITCH_0_BIT16:0,RESERVED_SWITC
H_0_BIT17:0,RESERVED_SWITCH_0_BIT18:0,RE
SERVED_SWITCH_0_BIT19:0,RESERVED_SWIT
CH_0_BIT20:0,RESERVED_SWITCH_0_BIT21:0,R
ESERVED_SWITCH_0_BIT22:0,RESERVED_SWIT
CH_0_BIT23:0,RESERVED_SWITCH_0_BIT24:0,R
ESERVED_SWITCH_0_BIT25:0,RESERVED_SWIT
CH_0_BIT26:0,RESERVED_SWITCH_0_BIT27:0,R
ESERVED_SWITCH_0_BIT28:0,RESERVED_SWIT
CH_0_BIT29:0,RESERVED_SWITCH_0_BIT30:0,R
ESERVED_SWITCH_0_BIT31:0,RESERVED_SWIT
CH_0_BIT32:0
RESERVED_SWITCH_0_BIT5,
RESERVED_SWITCH_0_BIT6,
RESERVED_SWITCH_0_BIT7,
RESERVED_SWITCH_0_BIT8,
RESERVED_SWITCH_0_BIT9,
RESERVED_SWITCH_0_BIT10,
RESERVED_SWITCH_0_BIT11,
RESERVED_SWITCH_0_BIT12,
RESERVED_SWITCH_0_BIT13,
RESERVED_SWITCH_0_BIT14,
RESERVED_SWITCH_0_BIT15,
RESERVED_SWITCH_0_BIT16,
RESERVED_SWITCH_0_BIT17,
RESERVED_SWITCH_0_BIT18,
RESERVED_SWITCH_0_BIT19,
RESERVED_SWITCH_0_BIT20,
RESERVED_SWITCH_0_BIT21,
RESERVED_SWITCH_0_BIT22,
RESERVED_SWITCH_0_BIT23,
RESERVED_SWITCH_0_BIT24,
RESERVED_SWITCH_0_BIT25,
RESERVED_SWITCH_0_BIT26,
RESERVED_SWITCH_0_BIT27,
RESERVED_SWITCH_0_BIT28,
RESERVED_SWITCH_0_BIT29,
RESERVED_SWITCH_0_BIT30,
RESERVED_SWITCH_0_BIT31,
RESERVED_SWITCH_0_BIT32
Default Value:
RESERVED_SWITCH_0_BIT1:0,RESERVED_SWI
TCH_0_BIT2:0,RESERVED_SWITCH_0_BIT3:0,R
ESERVED_SWITCH_0_BIT4:0,RESERVED_SWIT
CH_0_BIT5:0,RESERVED_SWITCH_0_BIT6:0,RES
ERVED_SWITCH_0_BIT7:0,RESERVED_SWITCH
_0_BIT8:0,RESERVED_SWITCH_0_BIT9:0,RESER
VED_SWITCH_0_BIT10:0,RESERVED_SWITCH_
0_BIT11:0,RESERVED_SWITCH_0_BIT12:0,RESE
RVED_SWITCH_0_BIT13:0,RESERVED_SWITCH
_0_BIT14:0,RESERVED_SWITCH_0_BIT15:0,RES
ERVED_SWITCH_0_BIT16:0,RESERVED_SWITC
H_0_BIT17:0,RESERVED_SWITCH_0_BIT18:0,RE
SERVED_SWITCH_0_BIT19:0,RESERVED_SWIT
CH_0_BIT20:0,RESERVED_SWITCH_0_BIT21:0,R
ESERVED_SWITCH_0_BIT22:0,RESERVED_SWIT
CH_0_BIT23:0,RESERVED_SWITCH_0_BIT24:0,R
ESERVED_SWITCH_0_BIT25:0,RESERVED_SWIT
CH_0_BIT26:0,RESERVED_SWITCH_0_BIT27:0,R
ESERVED_SWITCH_0_BIT28:0,RESERVED_SWIT
CH_0_BIT29:0,RESERVED_SWITCH_0_BIT30:0,R
ESERVED_SWITCH_0_BIT31:0,RESERVED_SWIT
CH_0_BIT32:0
CMP_IUPC_DETECT_SET_PATHLOSS_MEAS_S
WITCH,
CMP_IUPC_CARRY_IMSI_IMEI_SWITCH,
CMP_SIB_WITH_FILTERCOEF_SWITCH
Default Value:
CMP_REL_MR_AGPS_BF_D2F_SWITCH:
0,CMP_MR_AGPS_NOT_SUPP_STAT_TRANS_S
WITCH:
1,CMP_RBSETUP_DRD_SRBOVERH_SWITCH:
1,CMP_RBCFG_DRD_SRBOVERH_SWITCH:
1,CMP_IUPC_SUPP_ECNO_PATHLOSS_MEAS_S
WITCH:
0,CMP_PS_RBSETUP_DRD_EXIST_IUCS_SWITC
H:
1,CMP_IUPC_DETECT_SET_PATHLOSS_MEAS_
SWITCH:
0,CMP_IUPC_CARRY_IMSI_IMEI_SWITCH:
0,CMP_SIB_WITH_FILTERCOEF_SWITCH:0
CMP_IUPC_DETECT_SET_PATHLOSS_MEAS_S
WITCH,
CMP_IUPC_CARRY_IMSI_IMEI_SWITCH,
CMP_SIB_WITH_FILTERCOEF_SWITCH
Default Value:
CMP_REL_MR_AGPS_BF_D2F_SWITCH:
0,CMP_MR_AGPS_NOT_SUPP_STAT_TRANS_S
WITCH:
1,CMP_RBSETUP_DRD_SRBOVERH_SWITCH:
1,CMP_RBCFG_DRD_SRBOVERH_SWITCH:
1,CMP_IUPC_SUPP_ECNO_PATHLOSS_MEAS_S
WITCH:
0,CMP_PS_RBSETUP_DRD_EXIST_IUCS_SWITC
H:
1,CMP_IUPC_DETECT_SET_PATHLOSS_MEAS_
SWITCH:
0,CMP_IUPC_CARRY_IMSI_IMEI_SWITCH:
0,CMP_SIB_WITH_FILTERCOEF_SWITCH:0
CellFac BSC690 ADD WRFD- Mobility Meaning: Whether to support absolute priority-based
hPrioRe 0 UCELL 020126 Between measurement and reselection in the CELL_FACH
selSwitc SELRE UMTS state. When this switch is set to on, the UTRAN
h SEL and LTE carries the CELL_FACH measurement indication in
MOD Phase 1 system information block 19 (SIB19) designated for a
UCELL cell, instructing UEs in this cell to perform absolute
SELRE priority-based cell reselection. When this switch is set
SEL to off, the UTRAN does not carry the CELL_FACH
measurement indication in SIB19 designated for a
cell. For details about SIB19, see section 10.2.48.8.22
"System Information Block type 19" in 3GPP TS
25.331.
GUI Value Range: OFF, ON
Unit: None
Actual Value Range: OFF, ON
Default Value: OFF
CellFac BSC691 ADD WRFD- Mobility Meaning: Whether to support absolute priority-based
hPrioRe 0 UCELL 020126 Between measurement and reselection in the CELL_FACH
selSwitc SELRE UMTS state. When this switch is set to on, the UTRAN
h SEL and LTE carries the CELL_FACH measurement indication in
MOD Phase 1 system information block 19 (SIB19) designated for a
UCELL cell, instructing UEs in this cell to perform absolute
SELRE priority-based cell reselection. When this switch is set
SEL to off, the UTRAN does not carry the CELL_FACH
measurement indication in SIB19 designated for a
cell. For details about SIB19, see section 10.2.48.8.22
"System Information Block type 19" in 3GPP TS
25.331.
GUI Value Range: OFF, ON
Unit: None
Actual Value Range: OFF, ON
Default Value: OFF
CellFac BSC690 ADD WRFD- Mobility Meaning: Whether to perform absolute priority-based
hMeasL 0 UCELL 020126 Between measurement in the CELL_FACH state. The
ayer SELRE UMTS measurement layers are classified into high-priority
SEL and LTE layers and all layers. When this parameter is set to
MOD Phase 1 HIGH_PRIO_LAYERS, UEs in the CELL_FACH
UCELL state can only reselect to high-priority frequencies.
SELRE When this parameter is set to ALL_LAYERS, UEs in
SEL the CELL_FACH state can reselect to all frequencies.
GUI Value Range: HIGH_PRIO_LAYERS,
ALL_LAYERS
Unit: None
Actual Value Range: HIGH_PRIO_LAYERS,
ALL_LAYERS
Default Value: HIGH_PRIO_LAYERS
CellFac BSC691 ADD WRFD- Mobility Meaning: Whether to perform absolute priority-based
hMeasL 0 UCELL 020126 Between measurement in the CELL_FACH state. The
ayer SELRE UMTS measurement layers are classified into high-priority
SEL and LTE layers and all layers. When this parameter is set to
MOD Phase 1 HIGH_PRIO_LAYERS, UEs in the CELL_FACH
UCELL state can only reselect to high-priority frequencies.
SELRE When this parameter is set to ALL_LAYERS, UEs in
SEL the CELL_FACH state can reselect to all frequencies.
GUI Value Range: HIGH_PRIO_LAYERS,
ALL_LAYERS
Unit: None
Actual Value Range: HIGH_PRIO_LAYERS,
ALL_LAYERS
Default Value: HIGH_PRIO_LAYERS
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH2,
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH,
HO_CSFB_BASED_MEAS_FAST_RETURN_SWIT
CH,
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH,
HO_HANDOVER_FAST_RETURN_TO_LTE_SWI
TCH
Unit: None
Actual Value Range:
HO_COMACROMICRO_INTER_FREQ_OUT_SWI
TCH,
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SW
ITCH,
HO_U2L_COV_PS_REDIRECT_SWITCH,
HO_U2L_COV_PS_HO_SWITCH,
HO_INTER_RAT_PENALTY_FOR_UNCFG_SWIT
CH,
HO_CS_IRATHHO_WITH_INTRA_FREQ_MR_SW
ITCH,
HO_PS_IRATHHO_WITH_INTRA_FREQ_MR_SW
ITCH,
HO_MC_INTRAFREQ_NCELL_COMBINE_SWIT
CH,
HO_MC_INTERFREQ_NCELL_COMBINE_SWIT
CH,
HO_MC_GSM_NCELL_COMBINE_SWITCH,
HO_MC_LTE_NCELL_COMBINE_SWITCH,
HO_U2L_LOAD_PS_HO_SWITCH,
HO_U2L_LOAD_PS_REDIRECT_SWITCH,
HO_INTRA_FREQ_DETSET_INTO_ACTSET_OPT
SWH,
HO_INTRA_DETSET_DRNC_CELL_INTO_ACTS
ET,
HO_1A_OR_1C_TRIG_SERV_CELL_CHG_SWITC
H,
HO_1D_TRIG_SERV_CELL_CHG_JUDGE_SWITC
H, HO_SPID_MM_SWITCH,
HO_SRV_CELL_CHG_1D_RSCP_SWITCH,
HO_IUR_U2L_REDIR_SWITCH,
HO_IUR_U2L_FAST_RETURN_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH,
HO_INTER_RAT_DRNC_GSMNCELL_FILTER_S
WITCH,
HO_MC_INTRAFREQ_1A_REPLACE_1C_SWITC
H, HO_U2L_CONN_PRIO_SWITCH,
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH2,
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH,
HO_CSFB_BASED_MEAS_FAST_RETURN_SWIT
CH,
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH,
HO_HANDOVER_FAST_RETURN_TO_LTE_SWI
TCH
Default Value:
HO_COMACROMICRO_INTER_FREQ_OUT_SWI
TCH:
0,HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_S
WITCH:
0,HO_U2L_COV_PS_REDIRECT_SWITCH:
0,HO_U2L_COV_PS_HO_SWITCH:
0,HO_INTER_RAT_PENALTY_FOR_UNCFG_SWI
TCH:
0,HO_CS_IRATHHO_WITH_INTRA_FREQ_MR_S
WITCH:
0,HO_PS_IRATHHO_WITH_INTRA_FREQ_MR_S
WITCH:
0,HO_MC_INTRAFREQ_NCELL_COMBINE_SWI
TCH:
1,HO_MC_INTERFREQ_NCELL_COMBINE_SWI
TCH:
1,HO_MC_GSM_NCELL_COMBINE_SWITCH:
1,HO_MC_LTE_NCELL_COMBINE_SWITCH:
1,HO_U2L_LOAD_PS_HO_SWITCH:
0,HO_U2L_LOAD_PS_REDIRECT_SWITCH:
0,HO_INTRA_FREQ_DETSET_INTO_ACTSET_O
PTSWH:
0,HO_INTRA_DETSET_DRNC_CELL_INTO_ACT
SET:
0,HO_1A_OR_1C_TRIG_SERV_CELL_CHG_SWIT
CH:
0,HO_1D_TRIG_SERV_CELL_CHG_JUDGE_SWI
TCH:0,HO_SPID_MM_SWITCH:
0,HO_SRV_CELL_CHG_1D_RSCP_SWITCH:
0,HO_IUR_U2L_REDIR_SWITCH:
1,HO_IUR_U2L_FAST_RETURN_SWITCH:
0,HO_LTE_SERVICE_NEED_RSCP_SWITCH:
0,HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_
SWITCH:
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH2,
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH,
HO_CSFB_BASED_MEAS_FAST_RETURN_SWIT
CH,
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH,
HO_HANDOVER_FAST_RETURN_TO_LTE_SWI
TCH
Unit: None
Actual Value Range:
HO_COMACROMICRO_INTER_FREQ_OUT_SWI
TCH,
HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_SW
ITCH,
HO_U2L_COV_PS_REDIRECT_SWITCH,
HO_U2L_COV_PS_HO_SWITCH,
HO_INTER_RAT_PENALTY_FOR_UNCFG_SWIT
CH,
HO_CS_IRATHHO_WITH_INTRA_FREQ_MR_SW
ITCH,
HO_PS_IRATHHO_WITH_INTRA_FREQ_MR_SW
ITCH,
HO_MC_INTRAFREQ_NCELL_COMBINE_SWIT
CH,
HO_MC_INTERFREQ_NCELL_COMBINE_SWIT
CH,
HO_MC_GSM_NCELL_COMBINE_SWITCH,
HO_MC_LTE_NCELL_COMBINE_SWITCH,
HO_U2L_LOAD_PS_HO_SWITCH,
HO_U2L_LOAD_PS_REDIRECT_SWITCH,
HO_INTRA_FREQ_DETSET_INTO_ACTSET_OPT
SWH,
HO_INTRA_DETSET_DRNC_CELL_INTO_ACTS
ET,
HO_1A_OR_1C_TRIG_SERV_CELL_CHG_SWITC
H,
HO_1D_TRIG_SERV_CELL_CHG_JUDGE_SWITC
H, HO_SPID_MM_SWITCH,
HO_SRV_CELL_CHG_1D_RSCP_SWITCH,
HO_IUR_U2L_REDIR_SWITCH,
HO_IUR_U2L_FAST_RETURN_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH,
HO_INTER_RAT_DRNC_GSMNCELL_FILTER_S
WITCH,
HO_MC_INTRAFREQ_1A_REPLACE_1C_SWITC
H, HO_U2L_CONN_PRIO_SWITCH,
HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_S
WITCH2,
HO_SRVCC_FAST_RETURN_TO_LTE_SWITCH,
HO_CSFB_BASED_MEAS_FAST_RETURN_SWIT
CH,
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH,
HO_HANDOVER_FAST_RETURN_TO_LTE_SWI
TCH
Default Value:
HO_COMACROMICRO_INTER_FREQ_OUT_SWI
TCH:
0,HO_U2L_REDIR_BASED_ABSOLUTE_FREQ_S
WITCH:
0,HO_U2L_COV_PS_REDIRECT_SWITCH:
0,HO_U2L_COV_PS_HO_SWITCH:
0,HO_INTER_RAT_PENALTY_FOR_UNCFG_SWI
TCH:
0,HO_CS_IRATHHO_WITH_INTRA_FREQ_MR_S
WITCH:
0,HO_PS_IRATHHO_WITH_INTRA_FREQ_MR_S
WITCH:
0,HO_MC_INTRAFREQ_NCELL_COMBINE_SWI
TCH:
1,HO_MC_INTERFREQ_NCELL_COMBINE_SWI
TCH:
1,HO_MC_GSM_NCELL_COMBINE_SWITCH:
1,HO_MC_LTE_NCELL_COMBINE_SWITCH:
1,HO_U2L_LOAD_PS_HO_SWITCH:
0,HO_U2L_LOAD_PS_REDIRECT_SWITCH:
0,HO_INTRA_FREQ_DETSET_INTO_ACTSET_O
PTSWH:
0,HO_INTRA_DETSET_DRNC_CELL_INTO_ACT
SET:
0,HO_1A_OR_1C_TRIG_SERV_CELL_CHG_SWIT
CH:
0,HO_1D_TRIG_SERV_CELL_CHG_JUDGE_SWI
TCH:0,HO_SPID_MM_SWITCH:
0,HO_SRV_CELL_CHG_1D_RSCP_SWITCH:
0,HO_IUR_U2L_REDIR_SWITCH:
1,HO_IUR_U2L_FAST_RETURN_SWITCH:
0,HO_LTE_SERVICE_NEED_RSCP_SWITCH:
0,HO_GSMNCELL_OPGRP_CARRY_OVER_IUR_
SWITCH:
U2LTES BSC690 SET WRFD- Fast Meaning: Timer for LTE measurement when the UE
igMeasT 0 UU2LT 140226 Return has only signaling connections. The RNC starts this
ime EHONC WRFD- from timer for LTE measurement. When the timer expires,
OV 171223 UMTS the RNC stops LTE measurement.
to LTE GUI Value Range: 1~10
Fast Unit: s
Return
to LTE Actual Value Range: 1~10
for Default Value: 3
SRVCC
User
U2LTES BSC691 SET WRFD- Fast Meaning: Timer for LTE measurement when the UE
igMeasT 0 UU2LT 140226 Return has only signaling connections. The RNC starts this
ime EHONC WRFD- from timer for LTE measurement. When the timer expires,
OV 171223 UMTS the RNC stops LTE measurement.
to LTE GUI Value Range: 1~10
Fast Unit: s
Return
to LTE Actual Value Range: 1~10
for Default Value: 3
SRVCC
User
SigTarg BSC690 SET WRFD- Fast Meaning: Reference signal received power (RSRP)
etRatTh 0 UU2LT 140226 Return threshold for reporting event 3C during LTE
dRSRP EHONC WRFD- from measurement control for non-coverage-triggered
OV 171223 UMTS UMTS-to-LTE redirection with only signaling
to LTE connections. If the RSRP of an LTE cell reaches this
Fast threshold, the UE reports event 3C. If the RSRP of an
Return LTE cell falls below this threshold, the UE does not
to LTE report event 3C. For details about this parameter, see
for 3GPP TS 25.331.The RNC carries the Threshold other
SRVCC system IE in the measurement control message sent to
User the UE. This IE is used to calculate the actual value of
the inter-RAT measurement threshold. Actual value =
Threshold other system - 25 [dBm], Threshold other
system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
SigTarg BSC691 SET WRFD- Fast Meaning: Reference signal received power (RSRP)
etRatTh 0 UU2LT 140226 Return threshold for reporting event 3C during LTE
dRSRP EHONC WRFD- from measurement control for non-coverage-triggered
OV 171223 UMTS UMTS-to-LTE redirection with only signaling
to LTE connections. If the RSRP of an LTE cell reaches this
Fast threshold, the UE reports event 3C. If the RSRP of an
Return LTE cell falls below this threshold, the UE does not
to LTE report event 3C. For details about this parameter, see
for 3GPP TS 25.331.The RNC carries the Threshold other
SRVCC system IE in the measurement control message sent to
User the UE. This IE is used to calculate the actual value of
the inter-RAT measurement threshold. Actual value =
Threshold other system - 25 [dBm], Threshold other
system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
SigTarg BSC690 SET WRFD- Fast Meaning: Reference signal received quality (RSRQ)
etRatTh 0 UU2LT 140226 Return threshold for reporting event 3C during LTE
dRSRQ EHONC WRFD- from measurement control for non-coverage-triggered
OV 171223 UMTS UMTS-to-LTE redirection with only signaling
to LTE connections. If the RSRQ of an LTE cell reaches this
Fast threshold, the UE reports event 3C. If the RSRQ of an
Return LTE cell falls below this threshold, the UE does not
to LTE report event 3C. For details about this parameter, see
for 3GPP TS 25.331.The RNC carries the Threshold other
SRVCC system IE in the measurement control message sent to
User the UE. This IE is used to calculate the actual value of
the inter-RAT measurement threshold. Actual value =
Threshold other system - 25 [dBm], Threshold other
system = GUI value - 40.
GUI Value Range: 1~34
Unit: 0.5dB
Actual Value Range: -19.5~-3(Actual Value = GUI
Value*0.5 - 20)
Default Value: 20
SigTarg BSC691 SET WRFD- Fast Meaning: Reference signal received quality (RSRQ)
etRatTh 0 UU2LT 140226 Return threshold for reporting event 3C during LTE
dRSRQ EHONC WRFD- from measurement control for non-coverage-triggered
OV 171223 UMTS UMTS-to-LTE redirection with only signaling
to LTE connections. If the RSRQ of an LTE cell reaches this
Fast threshold, the UE reports event 3C. If the RSRQ of an
Return LTE cell falls below this threshold, the UE does not
to LTE report event 3C. For details about this parameter, see
for 3GPP TS 25.331.The RNC carries the Threshold other
SRVCC system IE in the measurement control message sent to
User the UE. This IE is used to calculate the actual value of
the inter-RAT measurement threshold. Actual value =
Threshold other system - 25 [dBm], Threshold other
system = GUI value - 40.
GUI Value Range: 1~34
Unit: 0.5dB
Actual Value Range: -19.5~-3(Actual Value = GUI
Value*0.5 - 20)
Default Value: 20
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH:0
CH:0,
HO_CSFB_BASED_RSCP_FAST_RETURN_SWIT
CH:0
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_CS_ONLY_MEAS_FAST_RETURN_S
WITCH,
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWIT
CH,
PERFENH_SATELLITE_TRANS_CELL_SHO_OPT
,
PERFENH_2G_LOAD_JUDGE_OPT_SWITCH,
PERFENH_U2L_HO_REQ_WITH_UE_HIST_INFO
_SW,
PERFENH_FAST_RETURN_OPT_SWITCH,
PERFENH_BE_SYSHOIN_BITRATE_OPT_SWITC
H,
PERFENH_CPC_SINGHARQ_COEXIST_SWITCH,
PERFENH_P2D_UE_LOC_BASED_DRD_OPT_SW
ITCH,
PERFENH_4CHSDPA_MOBILITY_OPT_SWITCH,
PERFENH_CPC_AND_4CHSDPA_COEXIST_SWI
TCH,
PERFENH_FORBID_HIGHSPEED_PF2D_OPT_SW
ITCH,
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH
Default Value:
PERFENH_CS_ONLY_MEAS_FAST_RETURN_S
WITCH:0,
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWIT
CH:0,
PERFENH_SATELLITE_TRANS_CELL_SHO_OPT
:0, PERFENH_2G_LOAD_JUDGE_OPT_SWITCH:
0,
PERFENH_U2L_HO_REQ_WITH_UE_HIST_INFO
_SW:0,
PERFENH_FAST_RETURN_OPT_SWITCH:0,
PERFENH_BE_SYSHOIN_BITRATE_OPT_SWITC
H:0,
PERFENH_CPC_SINGHARQ_COEXIST_SWITCH:
0,
PERFENH_P2D_UE_LOC_BASED_DRD_OPT_SW
ITCH:0,
PERFENH_4CHSDPA_MOBILITY_OPT_SWITCH:
0,
PERFENH_CPC_AND_4CHSDPA_COEXIST_SWI
TCH:0,
PERFENH_FORBID_HIGHSPEED_PF2D_OPT_SW
ITCH:0,
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT:1,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE:0,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT:0,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH:
0
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_CS_ONLY_MEAS_FAST_RETURN_S
WITCH,
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWIT
CH,
PERFENH_SATELLITE_TRANS_CELL_SHO_OPT
,
PERFENH_2G_LOAD_JUDGE_OPT_SWITCH,
PERFENH_U2L_HO_REQ_WITH_UE_HIST_INFO
_SW,
PERFENH_FAST_RETURN_OPT_SWITCH,
PERFENH_BE_SYSHOIN_BITRATE_OPT_SWITC
H,
PERFENH_CPC_SINGHARQ_COEXIST_SWITCH,
PERFENH_P2D_UE_LOC_BASED_DRD_OPT_SW
ITCH,
PERFENH_4CHSDPA_MOBILITY_OPT_SWITCH,
PERFENH_CPC_AND_4CHSDPA_COEXIST_SWI
TCH,
PERFENH_FORBID_HIGHSPEED_PF2D_OPT_SW
ITCH,
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH
Default Value:
PERFENH_CS_ONLY_MEAS_FAST_RETURN_S
WITCH:0,
PERFENH_CSPS_IRAT_HO_FAIL_RETRY_SWIT
CH:0,
PERFENH_SATELLITE_TRANS_CELL_SHO_OPT
:0, PERFENH_2G_LOAD_JUDGE_OPT_SWITCH:
0,
PERFENH_U2L_HO_REQ_WITH_UE_HIST_INFO
_SW:0,
PERFENH_FAST_RETURN_OPT_SWITCH:0,
PERFENH_BE_SYSHOIN_BITRATE_OPT_SWITC
H:0,
PERFENH_CPC_SINGHARQ_COEXIST_SWITCH:
0,
PERFENH_P2D_UE_LOC_BASED_DRD_OPT_SW
ITCH:0,
PERFENH_4CHSDPA_MOBILITY_OPT_SWITCH:
0,
PERFENH_CPC_AND_4CHSDPA_COEXIST_SWI
TCH:0,
PERFENH_FORBID_HIGHSPEED_PF2D_OPT_SW
ITCH:0,
PERFENH_DIFF_SERVICE_BASED_ON_SPI_WEI
GHT:1,
PERFENH_CS_RATE_CONTROL_WHEN_RETRIE
VE:0,
PERFENH_FORBID_FACH_MULRAB_INITRATE
_OPT:0,
PERFENH_DRNC_DF2U_FORBID_OPT_SWITCH:
0
9)RIM_ON_ECO_SWITCH(Support RIM by
eCoordinator Switch)
Whether the RIM procedure is implemented through
the eCoordinator.
1: This switch is turned on. The RIM procedure is
implemented through the eCoordinator.
0: This switch is turned off. the RIM procedure is
implemented through the CN.
This parameter is an advanced parameter. Therefore,
modify the setting of this parameter under the
instruction of Huawei technical support.
10)SRBCHG_DRD_FAST_RB_SETUP_SWITCH(R
B Fast Setup Switch for RB Setups Accompanied by
DRDs with Changing SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with changing SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
changing SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with changing SRBs.
11)SRBNOCHG_DRD_FAST_RB_SETUP_SWITC
H(RB Fast Setup Switch for RB Setups Accompanied
by DRDs with Unchanged SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with unchanged SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
unchanged SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with unchanged SRBs.
12)EXTD_LAC_PAGING_SWITCH(Extended LAC
Paging Switch)
Whether to enable the extended LAC paging function
1: This switch is turned on. The extended LAC paging
function is enabled.
0: This switch is turned off. The extended LAC paging
function is disabled.
13)TCP_PROXY_SWITCH
Whether to enable the TCP proxy function.
H:0,SRBCHG_DRD_FAST_RB_SETUP_SWITCH:
0,SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH:
0,FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITC
H:0,WBAMR_HHO_FAIL_ROLLBACK_SWITCH:
0,EXTD_LAC_PAGING_SWITCH:
0,TCP_PROXY_SWITCH:
0,SEAMLESS_CRYSTAL_VOICE_SWITCH:
0,CS_RB_PRI_MC_SWITCH:
0,L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH:
0,CRYSTAL_VOICE_DEEPCOVER_SWITCH:
0,LOAD_BASED_P2D_SWITCH:
0,PS_R99_BLER_STAT_OPT_SWITCH:
0,STATE_FACH_CONSISTENT_OPTI_SWITCH:
0,D2P_RECFG_REEST_SWITCH:0
9)RIM_ON_ECO_SWITCH(Support RIM by
eCoordinator Switch)
Whether the RIM procedure is implemented through
the eCoordinator.
1: This switch is turned on. The RIM procedure is
implemented through the eCoordinator.
0: This switch is turned off. the RIM procedure is
implemented through the CN.
This parameter is an advanced parameter. Therefore,
modify the setting of this parameter under the
instruction of Huawei technical support.
10)SRBCHG_DRD_FAST_RB_SETUP_SWITCH(R
B Fast Setup Switch for RB Setups Accompanied by
DRDs with Changing SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with changing SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
changing SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with changing SRBs.
11)SRBNOCHG_DRD_FAST_RB_SETUP_SWITC
H(RB Fast Setup Switch for RB Setups Accompanied
by DRDs with Unchanged SRBs)
Whether to use the RB fast setup function for RB
setups accompanied by DRDs with unchanged SRBs.
1: This switch is turned on. The RB fast setup function
is used for RB setups accompanied by DRDs with
unchanged SRBs.
0: This switch is turned off. The simultaneous setup
procedure is used for RB setups accompanied by
DRDs with unchanged SRBs.
12)EXTD_LAC_PAGING_SWITCH(Extended LAC
Paging Switch)
Whether to enable the extended LAC paging function
1: This switch is turned on. The extended LAC paging
function is enabled.
0: This switch is turned off. The extended LAC paging
function is disabled.
13)TCP_PROXY_SWITCH
Whether to enable the TCP proxy function.
H:0,SRBCHG_DRD_FAST_RB_SETUP_SWITCH:
0,SRBNOCHG_DRD_FAST_RB_SETUP_SWITCH:
0,FACH_RB_RECFG_FAIL_SPEC_CAUSE_SWITC
H:0,WBAMR_HHO_FAIL_ROLLBACK_SWITCH:
0,EXTD_LAC_PAGING_SWITCH:
0,TCP_PROXY_SWITCH:
0,SEAMLESS_CRYSTAL_VOICE_SWITCH:
0,CS_RB_PRI_MC_SWITCH:
0,L2U_SRVCC_PS_TIMEOUT_CS_RELOC_IN_S
WITCH:
0,CRYSTAL_VOICE_DEEPCOVER_SWITCH:
0,LOAD_BASED_P2D_SWITCH:
0,PS_R99_BLER_STAT_OPT_SWITCH:
0,STATE_FACH_CONSISTENT_OPTI_SWITCH:
0,D2P_RECFG_REEST_SWITCH:0
SibCfgB BSC690 ADD WRFD- System Meaning: Whether certain system information blocks
itMap 0 UCELL 010401 Informat are broadcast in a cell. If a system information block
SIBSWI WRFD- ion is selected, this block is broadcast in the cell.
TCH 020126 Broadca GUI Value Range: SIB2, SIB4, SIB12, SIB18, SIB19,
MOD sting SIB11BIS
UCELL Mobility Unit: None
SIBSWI Between
TCH UMTS Actual Value Range: SIB2, SIB4, SIB12, SIB18,
and LTE SIB19, SIB11BIS
Phase 1 Default Value:
SIB2:0,SIB4:0,SIB12:0,SIB18:0,SIB19:0,SIB11BIS:0
SibCfgB BSC691 ADD WRFD- System Meaning: Whether certain system information blocks
itMap 0 UCELL 010401 Informat are broadcast in a cell. If a system information block
SIBSWI WRFD- ion is selected, this block is broadcast in the cell.
TCH 020126 Broadca GUI Value Range: SIB2, SIB4, SIB12, SIB18, SIB19,
MOD sting SIB11BIS
UCELL Mobility Unit: None
SIBSWI Between
TCH UMTS Actual Value Range: SIB2, SIB4, SIB12, SIB18,
and LTE SIB19, SIB11BIS
Phase 1 Default Value:
SIB2:0,SIB4:0,SIB12:0,SIB18:0,SIB19:0,SIB11BIS:0
H, RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH, ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH, CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH, DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Unit: None
Actual Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC
H,
RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH,
ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH,
CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH,
DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Default Value:
FACH_RB_REL_CU_CROSS_OPT_SWITCH:
0,CMCF_CHECK_CMP_SWITCH:
0,ASU_RSP_FAIL_REL_UE:
0,CELL_PCH_UES_OPT_SWITCH:
0,DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H:
0,UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH:
0,CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH:
0,IUB_TRM_PREALLOC_OPT_SWITCH:
0,SRB_EDCH_RECFG_OPT_SWITCH:
0,BASED_IUUP_PEERADDR_PFM_OPT_SWITCH
:
0,DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G:
0,OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH:
0,U2L_CSFB_FAST_RETURN_PROC_OPTI_SWIT
CH:0,RL_PROCEDURE_OPT_SWITCH:
0,CU_OVERLAP_OPT_SWITCH:
0,DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH:0,ADJUST_CNID_WITH_CN:
0,RAB_REL_FOC_SUCCESS_RCV_SRB_RESET:
0,CS_TRIG_PS_F2D_SWITCH:
0,DEAL_RL_RECFG_CORRECT_SWITCH:
0,RB_RECFG_RL_REEST_MDC_ROLL_BACK_S
WITCH:
0,CODE_CONFLICT_RL_REEST_SWITCH:
0,RELOC_IN_AMR_NOISE_DETECT_SWITCH:
0,CMP_NO_ACTIVE_CFN_OPT_SWITCH:
0,NON122_AMR_HHO_ROLLBACK_SWITCH:
0,VQI_AFTER_DT_CONNECT_SWITCH:
0,FACH_CU_RELOC_RB_MSG_COMP_SWITCH:
0,SRNS_PROCEDURE_OPTIMIZE_SWITCH:
0,CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SW
ITCH:
0,DRNC_BUFF_RL_RECFG_PREP_SWITCH:
0,PS_DCH0K_RB_MSG_OPT_SWITCH:
0,PS_DSCR_IU_REL_COMPATIBLE_SWITCH:1
H, RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH, ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH, CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH, DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Unit: None
Actual Value Range:
FACH_RB_REL_CU_CROSS_OPT_SWITCH,
CMCF_CHECK_CMP_SWITCH,
ASU_RSP_FAIL_REL_UE,
CELL_PCH_UES_OPT_SWITCH,
DRNC_NOTICE_NODEB_SRNC_VEST_SWITCH,
UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_SW
ITCH,
CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH,
IUB_TRM_PREALLOC_OPT_SWITCH,
SRB_EDCH_RECFG_OPT_SWITCH,
BASED_IUUP_PEERADDR_PFM_OPT_SWITCH,
DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CHG,
OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH,
U2L_CSFB_FAST_RETURN_PROC_OPTI_SWITC
H,
RL_PROCEDURE_OPT_SWITCH,
CU_OVERLAP_OPT_SWITCH,
DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH,
ADJUST_CNID_WITH_CN,
RAB_REL_FOC_SUCCESS_RCV_SRB_RESET,
CS_TRIG_PS_F2D_SWITCH,
DEAL_RL_RECFG_CORRECT_SWITCH,
RB_RECFG_RL_REEST_MDC_ROLL_BACK_SWI
TCH,
CODE_CONFLICT_RL_REEST_SWITCH,
RELOC_IN_AMR_NOISE_DETECT_SWITCH,
CMP_NO_ACTIVE_CFN_OPT_SWITCH,
NON122_AMR_HHO_ROLLBACK_SWITCH,
VQI_AFTER_DT_CONNECT_SWITCH,
FACH_CU_RELOC_RB_MSG_COMP_SWITCH,
SRNS_PROCEDURE_OPTIMIZE_SWITCH,
CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SWI
TCH,
DRNC_BUFF_RL_RECFG_PREP_SWITCH,
PS_DCH0K_RB_MSG_OPT_SWITCH,
PS_DSCR_IU_REL_COMPATIBLE_SWITCH
Default Value:
FACH_RB_REL_CU_CROSS_OPT_SWITCH:
0,CMCF_CHECK_CMP_SWITCH:
0,ASU_RSP_FAIL_REL_UE:
0,CELL_PCH_UES_OPT_SWITCH:
0,DRNC_NOTICE_NODEB_SRNC_VEST_SWITC
H:
0,UMI_WITHOUT_NEWHRNTI_IN_CELLDCH_S
WITCH:
0,CCH_IUR_CELLUPT_FAIL_DSCR_SWITCH:
0,IUB_TRM_PREALLOC_OPT_SWITCH:
0,SRB_EDCH_RECFG_OPT_SWITCH:
0,BASED_IUUP_PEERADDR_PFM_OPT_SWITCH
:
0,DRNC_SUPP_RL_ADD_WITH_SRV_CELL_CH
G:
0,OPTI_REL_UE_AFTER_IRAT_RESEL_SWITCH:
0,U2L_CSFB_FAST_RETURN_PROC_OPTI_SWIT
CH:0,RL_PROCEDURE_OPT_SWITCH:
0,CU_OVERLAP_OPT_SWITCH:
0,DRNC_DEL_RL_AFTER_CELL_UPD_RELOC_S
WITCH:0,ADJUST_CNID_WITH_CN:
0,RAB_REL_FOC_SUCCESS_RCV_SRB_RESET:
0,CS_TRIG_PS_F2D_SWITCH:
0,DEAL_RL_RECFG_CORRECT_SWITCH:
0,RB_RECFG_RL_REEST_MDC_ROLL_BACK_S
WITCH:
0,CODE_CONFLICT_RL_REEST_SWITCH:
0,RELOC_IN_AMR_NOISE_DETECT_SWITCH:
0,CMP_NO_ACTIVE_CFN_OPT_SWITCH:
0,NON122_AMR_HHO_ROLLBACK_SWITCH:
0,VQI_AFTER_DT_CONNECT_SWITCH:
0,FACH_CU_RELOC_RB_MSG_COMP_SWITCH:
0,SRNS_PROCEDURE_OPTIMIZE_SWITCH:
0,CALL_RE_ESTAB_CROSS_WITH_SYSOUT_SW
ITCH:
0,DRNC_BUFF_RL_RECFG_PREP_SWITCH:
0,PS_DCH0K_RB_MSG_OPT_SWITCH:
0,PS_DSCR_IU_REL_COMPATIBLE_SWITCH:1
WRFD- Fast
020129 Return
from
WRFD- UMTS
020302 to LTE
WRFD- 3G/2G
020303 Commo
WRFD- n Load
020304 Manage
ment
WRFD-
020305 Coverag
e Based
WRFD- PS
020306 Redirect
WRFD- ion from
0203080 UMTS
1 to LTE
Inter-
RAT
Handov
er Phase
2
HSUPA
Mobility
Manage
ment
Inter-
RAT
Handov
er Based
on DL
QoS
Mobility
Between
UMTS
and LTE
Phase 1
Intra
Frequen
cy Hard
Handov
er
PS
Service
Redirect
ion from
UMTS
to LTE
Inter
Frequen
cy Hard
Handov
er Based
on
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
Inter-
RAT
Handov
er Based
on
Service
Inter-
RAT
Handov
er Based
on Load
NACC(
Network
Assisted
Cell
Change)
WRFD- Fast
020129 Return
from
WRFD- UMTS
020302 to LTE
WRFD- 3G/2G
020303 Commo
WRFD- n Load
020304 Manage
ment
WRFD-
020305 Coverag
e Based
WRFD- PS
020306 Redirect
WRFD- ion from
0203080 UMTS
1 to LTE
Inter-
RAT
Handov
er Phase
2
HSUPA
Mobility
Manage
ment
Inter-
RAT
Handov
er Based
on DL
QoS
Mobility
Between
UMTS
and LTE
Phase 1
Intra
Frequen
cy Hard
Handov
er
PS
Service
Redirect
ion from
UMTS
to LTE
Inter
Frequen
cy Hard
Handov
er Based
on
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
Inter-
RAT
Handov
er Based
on
Service
Inter-
RAT
Handov
er Based
on Load
NACC(
Network
Assisted
Cell
Change)
Qrxlevm BSC690 ADD WRFD- Intra Meaning: The minimum required quality threshold
in 0 UCELL 010801 RNC corresponding to CPICH RSCP. When the measured
SELRE WRFD- Cell CPICH RSCP is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of RX level for
MOD Inter cell selection/reselection. The RNC decides whether
UCELL RNC the UE can camp on the cell according to the cell
SELRE Cell selection/reselection criteria. The setting of Qrxlevmin
SEL Update should be related to Qqualmin. For details about this
parameter, see section 10.3.2.3 in 3GPP TS 25.331.
GUI Value Range: -58~-13
Unit: 2dBm
Actual Value Range: -115~-25
Default Value: -58
Qrxlevm BSC691 ADD WRFD- Intra Meaning: The minimum required quality threshold
in 0 UCELL 010801 RNC corresponding to CPICH RSCP. When the measured
SELRE WRFD- Cell CPICH RSCP is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of RX level for
MOD Inter cell selection/reselection. The RNC decides whether
UCELL RNC the UE can camp on the cell according to the cell
SELRE Cell selection/reselection criteria. The setting of Qrxlevmin
SEL Update should be related to Qqualmin. For details about this
parameter, see section 10.3.2.3 in 3GPP TS 25.331.
GUI Value Range: -58~-13
Unit: 2dBm
Actual Value Range: -115~-25
Default Value: -58
Qqualmi BSC690 ADD WRFD- Intra Meaning: The minimum required quality threshold
n 0 UCELL 010801 RNC corresponding to CPICH Ec/No. When the measured
SELRE WRFD- Cell CPICH Ec/No is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of quality level
MOD Inter for cell selection/reselection. The RNC decides
UCELL RNC whether the UE can camp on the cell according to the
SELRE Cell cell selection/reselection criteria. For details about this
SEL Update parameter, see 3GPP TS 25.304.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -18
Qqualmi BSC691 ADD WRFD- Intra Meaning: The minimum required quality threshold
n 0 UCELL 010801 RNC corresponding to CPICH Ec/No. When the measured
SELRE WRFD- Cell CPICH Ec/No is larger than the value of this
SEL 010802 Update parameter, the cell meets the S criteria of quality level
MOD Inter for cell selection/reselection. The RNC decides
UCELL RNC whether the UE can camp on the cell according to the
SELRE Cell cell selection/reselection criteria. For details about this
SEL Update parameter, see 3GPP TS 25.304.
GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -18
RSRQS BSC690 ADD WRFD- Mobility Meaning: Whether SIB19 contains the RSRQ-related
witch 0 UCELL 020126 Between "ThdToHighRSRQ", "ThdToLowRSRQ",
NFREQ UMTS "EQqualmin" and "ThdServingLow2"(See "ADD
PRIOIN and LTE UCELLSELRESEL") parameters. When this
FO Phase 1 parameter is set to True, SIB19 contains these
MOD parameters. When this parameter is set to False,
UCELL SIB19 does not contain these parameters. For details
NFREQ about this parameter, see 3GPP TS 25.304.
PRIOIN GUI Value Range: FALSE, TRUE
FO Unit: None
Actual Value Range: TRUE, FALSE
Default Value: False
RSRQS BSC691 ADD WRFD- Mobility Meaning: Whether SIB19 contains the RSRQ-related
witch 0 UCELL 020126 Between "ThdToHighRSRQ", "ThdToLowRSRQ",
NFREQ UMTS "EQqualmin" and "ThdServingLow2"(See "ADD
PRIOIN and LTE UCELLSELRESEL") parameters. When this
FO Phase 1 parameter is set to True, SIB19 contains these
MOD parameters. When this parameter is set to False,
UCELL SIB19 does not contain these parameters. For details
NFREQ about this parameter, see 3GPP TS 25.304.
PRIOIN GUI Value Range: FALSE, TRUE
FO Unit: None
Actual Value Range: TRUE, FALSE
Default Value: False
EQrxlev BSC690 ADD WRFD- Mobility Meaning: This parameter indicates the minimum
min 0 UCELL 020126 Between required RSRP of the cell on the target frequency.
NFREQ UMTS During cell reselection decision, the Srxlev is obtained
PRIOIN and LTE by the RSRP of the cell on the target frequency
FO Phase 1 measured by the UE minus the value of this
MOD parameter. If the Srxlev is greater than the parameter
UCELL of the target cell during the interval defined by
NFREQ Treselections, the UE performs cell reselection to the
PRIOIN target cell. The value of this parameter is set during
FO network planning. The greater the value of this
parameter is, the harder the UE reselects a cell on this
frequency, the smaller the value of this parameter is,
the easier the UE reselects a cell on this frequency.
For details on this parameter, see 3GPP TS 25.304.
GUI Value Range: -70~-22
Unit: 2dBm
Actual Value Range: -140~-44
Default Value: -70
EQrxlev BSC691 ADD WRFD- Mobility Meaning: This parameter indicates the minimum
min 0 UCELL 020126 Between required RSRP of the cell on the target frequency.
NFREQ UMTS During cell reselection decision, the Srxlev is obtained
PRIOIN and LTE by the RSRP of the cell on the target frequency
FO Phase 1 measured by the UE minus the value of this
MOD parameter. If the Srxlev is greater than the parameter
UCELL of the target cell during the interval defined by
NFREQ Treselections, the UE performs cell reselection to the
PRIOIN target cell. The value of this parameter is set during
FO network planning. The greater the value of this
parameter is, the harder the UE reselects a cell on this
frequency, the smaller the value of this parameter is,
the easier the UE reselects a cell on this frequency.
For details on this parameter, see 3GPP TS 25.304.
GUI Value Range: -70~-22
Unit: 2dBm
Actual Value Range: -140~-44
Default Value: -70
Qrxlevm BSC690 ADD WRFD- Inter Meaning: Minimum CPICH RSCP for the
in 0 UINTE 010802 RNC neighboring cell on cell reselection. The neighboring
RFREQ Cell cell can be involved in cell sorting for reselection only
NCELL Update when its CPICH RSCP is above this threshold. If this
MOD parameter is set to the same value as Qrxlevmin for
UINTE the serving cell, Qrxlevmin is not contained in SIB11
RFREQ or SIB12. In this case, the UE extracts the Qrxlevmin
NCELL from SIB3. For details, see the 3GPP TS 25.331.
Qrxlevmin should be set to a proper value, to match
Qqualmin.
GUI Value Range: -58~-13
Unit: 2dBm
Actual Value Range: -115~-25( Actual value = -115
+ (58 + GUI value) x 2)
Default Value: -58
Qrxlevm BSC691 ADD WRFD- Inter Meaning: Minimum CPICH RSCP for the
in 0 UINTE 010802 RNC neighboring cell on cell reselection. The neighboring
RFREQ Cell cell can be involved in cell sorting for reselection only
NCELL Update when its CPICH RSCP is above this threshold. If this
MOD parameter is set to the same value as Qrxlevmin for
UINTE the serving cell, Qrxlevmin is not contained in SIB11
RFREQ or SIB12. In this case, the UE extracts the Qrxlevmin
NCELL from SIB3. For details, see the 3GPP TS 25.331.
Qrxlevmin should be set to a proper value, to match
Qqualmin.
GUI Value Range: -58~-13
Unit: 2dBm
Actual Value Range: -115~-25( Actual value = -115
+ (58 + GUI value) x 2)
Default Value: -58
InterRat BSC690 ADD WRFD- Intra Meaning: Inter-RAT reselection delay scaling factor.
TreselSc 0 UCELL 010801 RNC Multiply this parameter by its reselection delay to
alingFac SELRE Cell increase the inter-RAT reselection time. This
tor SEL Update parameter is not configured when its value is 255. For
MOD details about this parameter, see 3GPP TS 25.304.
UCELL GUI Value Range: 4~19;255
SELRE Unit: None
SEL
Actual Value Range: 1~4.75, 255, step:0.25
Default Value: 255
InterRat BSC691 ADD WRFD- Intra Meaning: Inter-RAT reselection delay scaling factor.
TreselSc 0 UCELL 010801 RNC Multiply this parameter by its reselection delay to
alingFac SELRE Cell increase the inter-RAT reselection time. This
tor SEL Update parameter is not configured when its value is 255. For
MOD details about this parameter, see 3GPP TS 25.304.
UCELL GUI Value Range: 4~19;255
SELRE Unit: None
SEL
Actual Value Range: 1~4.75, 255, step:0.25
Default Value: 255
EQqual BSC690 ADD WRFD- Mobility Meaning: Minimum signal quality of a cell using the
min 0 UCELL 020126 Between target UARFCN. The Squal value is equal to the UE-
NFREQ UMTS measured RSRQ in the cell using the target UARFCN
PRIOIN and LTE minus this parameter value. If the Squal value keeps
FO Phase 1 higher than "ThdToLowRSRQ" or
MOD "ThdToHighRSRQ" during the cell reselection delay
UCELL time, the UE will reselect the target cell. For details
NFREQ about this parameter, see 3GPP TS 25.304.
PRIOIN GUI Value Range: -34~-3
FO Unit: dB
Actual Value Range: -34~-3
Default Value: -22
EQqual BSC691 ADD WRFD- Mobility Meaning: Minimum signal quality of a cell using the
min 0 UCELL 020126 Between target UARFCN. The Squal value is equal to the UE-
NFREQ UMTS measured RSRQ in the cell using the target UARFCN
PRIOIN and LTE minus this parameter value. If the Squal value keeps
FO Phase 1 higher than "ThdToLowRSRQ" or
MOD "ThdToHighRSRQ" during the cell reselection delay
UCELL time, the UE will reselect the target cell. For details
NFREQ about this parameter, see 3GPP TS 25.304.
PRIOIN GUI Value Range: -34~-3
FO Unit: dB
Actual Value Range: -34~-3
Default Value: -22
ThdToH BSC690 ADD WRFD- Mobility Meaning: RSRQ threshold of the target cell relative to
ighRSR 0 UCELL 020126 Between "EQqualmin" when the absolute priority of the target
Q NFREQ UMTS UARFCN is higher than that of the serving cell and
PRIOIN and LTE cell reselection from the serving cell to a cell using the
FO Phase 1 target UARFCN is to be implemented. After the cell
MOD reselection measurement starts, if the signal quality of
UCELL the target cell keeps higher than this threshold during
NFREQ the cell reselection delay time, the UE will reselect the
PRIOIN target cell. For details about this parameter, see 3GPP
FO TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 3
ThdToH BSC691 ADD WRFD- Mobility Meaning: RSRQ threshold of the target cell relative to
ighRSR 0 UCELL 020126 Between "EQqualmin" when the absolute priority of the target
Q NFREQ UMTS UARFCN is higher than that of the serving cell and
PRIOIN and LTE cell reselection from the serving cell to a cell using the
FO Phase 1 target UARFCN is to be implemented. After the cell
MOD reselection measurement starts, if the signal quality of
UCELL the target cell keeps higher than this threshold during
NFREQ the cell reselection delay time, the UE will reselect the
PRIOIN target cell. For details about this parameter, see 3GPP
FO TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 3
ThdToL BSC690 ADD WRFD- Mobility Meaning: RSRQ threshold of the target cell relative to
owRSR 0 UCELL 020126 Between "EQqualmin" when the absolute priority of the target
Q NFREQ UMTS UARFCN is lower than that of the serving cell and
PRIOIN and LTE cell reselection from the serving cell to a cell using the
FO Phase 1 target UARFCN is to be implemented. After the cell
MOD reselection measurement starts, if the signal quality of
UCELL the serving cell keeps lower than the Ec/N0 threshold
NFREQ for cell reselection towards a lower-priority cell and
PRIOIN the signal quality of the target cell keeps higher than
FO this threshold during the cell reselection delay time,
the UE will reselect the target cell. For details about
this parameter, see 3GPP TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 3
ThdToL BSC691 ADD WRFD- Mobility Meaning: RSRQ threshold of the target cell relative to
owRSR 0 UCELL 020126 Between "EQqualmin" when the absolute priority of the target
Q NFREQ UMTS UARFCN is lower than that of the serving cell and
PRIOIN and LTE cell reselection from the serving cell to a cell using the
FO Phase 1 target UARFCN is to be implemented. After the cell
MOD reselection measurement starts, if the signal quality of
UCELL the serving cell keeps lower than the Ec/N0 threshold
NFREQ for cell reselection towards a lower-priority cell and
PRIOIN the signal quality of the target cell keeps higher than
FO this threshold during the cell reselection delay time,
the UE will reselect the target cell. For details about
this parameter, see 3GPP TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 3
ThdServ BSC690 ADD WRFD- Mobility Meaning: CPICH Ec/No threshold of the serving cell
ingLow 0 UCELL 020126 Between for cell reselection towards the target cell using a
2 SELRE UMTS lower-priority frequency. After the cell reselection
SEL and LTE measurement starts, if the Ec/No of the serving cell
MOD Phase 1 keeps lower than this parameter value and the Ec/No
UCELL of the target cell using a lower-priority frequency
SELRE keeps high during the cell reselection delay time, the
SEL UE will reselect the target cell. For details about this
parameter, see 3GPP TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 2
ThdServ BSC691 ADD WRFD- Mobility Meaning: CPICH Ec/No threshold of the serving cell
ingLow 0 UCELL 020126 Between for cell reselection towards the target cell using a
2 SELRE UMTS lower-priority frequency. After the cell reselection
SEL and LTE measurement starts, if the Ec/No of the serving cell
MOD Phase 1 keeps lower than this parameter value and the Ec/No
UCELL of the target cell using a lower-priority frequency
SELRE keeps high during the cell reselection delay time, the
SEL UE will reselect the target cell. For details about this
parameter, see 3GPP TS 25.304.
GUI Value Range: 0~31
Unit: dB
Actual Value Range: 0~31
Default Value: 2
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
R8_UE_SEL_DPUE_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH, CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Unit: None
Actual Value Range:
PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
R8_UE_SEL_DPUE_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH,
CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Default Value:
PS_F2D_OVERLAP_CELLUPT_SWITCH:
0,AMR_HHO_FAIL_ROLLBACK_SWITCH:
0,PHY_RECFG_REEST_SWITCH:
0,IUR_RL_REEST_SWITCH:
0,RB_SETUP_RL_REEST_SWITCH:
0,RRC_CONN_SETUP_OPT_SWITCH:
0,TCP_ACK_ACCELERATOR_SWITCH:
0,RRC_CELLFACH_TRB_RESET_TO_F2D_SWIT
CH:0,SEND_MSG_NULL_SWITCH:
0,FD_PCH_IUR_CS_OPT_SWITCH:
0,CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H:0,CS_HHO_ASYNC_CTRL_SWITCH:
0,PS_HHO_ASYNC_CTRL_SWITCH:
0,IUR_HHO_ASYNC_CTRL_SWITCH:
0,R8_UE_SEL_DPUE_SWITCH:
0,F2P_DATATRANS_OPTIMIZE_SWITCH:
0,IRATHO_HOCANCEL_RL_REEST_SWITCH:
0,TRB_RESET_RL_REEST_SWITCH:
0,RB_REL_RL_REEST_SWITCH:
0,RB_SETUP_ENHANCE_RL_REEST_SWITCH:
0,RAB_SETUPMOD_CNT_FIX_SWITCH:
0,PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH:
0,FAST_RETURN_LTE_BY_CELL_SELECT_SWIT
CH:
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH, CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Unit: None
Actual Value Range:
PS_F2D_OVERLAP_CELLUPT_SWITCH,
AMR_HHO_FAIL_ROLLBACK_SWITCH,
PHY_RECFG_REEST_SWITCH,
IUR_RL_REEST_SWITCH,
RB_SETUP_RL_REEST_SWITCH,
RRC_CONN_SETUP_OPT_SWITCH,
TCP_ACK_ACCELERATOR_SWITCH,
RRC_CELLFACH_TRB_RESET_TO_F2D_SWITC
H, SEND_MSG_NULL_SWITCH,
FD_PCH_IUR_CS_OPT_SWITCH,
CELLUPT_T314_T315_TIMEOUT_OPT_SWITCH,
CS_HHO_ASYNC_CTRL_SWITCH,
PS_HHO_ASYNC_CTRL_SWITCH,
IUR_HHO_ASYNC_CTRL_SWITCH,
F2P_DATATRANS_OPTIMIZE_SWITCH,
IRATHO_HOCANCEL_RL_REEST_SWITCH,
TRB_RESET_RL_REEST_SWITCH,
RB_REL_RL_REEST_SWITCH,
RB_SETUP_ENHANCE_RL_REEST_SWITCH,
RAB_SETUPMOD_CNT_FIX_SWITCH,
PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH,
FAST_RETURN_LTE_BY_CELL_SELECT_SWITC
H, UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH,
PHYCHRECFG_ENH_RL_REEST_SWITCH,
RBRECFG_ENH_RL_REEST_SWITCH,
SMC_STOP_RLC_SWITCH,
GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWIT
CH,
CMP_IU_QOS_GTP_PDU_SN_SWITCH,
DL_TRB_RESET_BUFF_SWITCH,
RRC_CELLFACH_DL_TRB_RESET_TO_F2D_SWI
TCH,
RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH
Default Value:
PS_F2D_OVERLAP_CELLUPT_SWITCH:
0,AMR_HHO_FAIL_ROLLBACK_SWITCH:
0,PHY_RECFG_REEST_SWITCH:
0,IUR_RL_REEST_SWITCH:
0,RB_SETUP_RL_REEST_SWITCH:
0,RRC_CONN_SETUP_OPT_SWITCH:
0,TCP_ACK_ACCELERATOR_SWITCH:
0,RRC_CELLFACH_TRB_RESET_TO_F2D_SWIT
CH:0,SEND_MSG_NULL_SWITCH:
0,FD_PCH_IUR_CS_OPT_SWITCH:
0,CELLUPT_T314_T315_TIMEOUT_OPT_SWITC
H:0,CS_HHO_ASYNC_CTRL_SWITCH:
0,PS_HHO_ASYNC_CTRL_SWITCH:
0,IUR_HHO_ASYNC_CTRL_SWITCH:
0,F2P_DATATRANS_OPTIMIZE_SWITCH:
0,IRATHO_HOCANCEL_RL_REEST_SWITCH:
0,TRB_RESET_RL_REEST_SWITCH:
0,RB_REL_RL_REEST_SWITCH:
0,RB_SETUP_ENHANCE_RL_REEST_SWITCH:
0,RAB_SETUPMOD_CNT_FIX_SWITCH:
0,PCH_UE_RLC_UNRECOVERABLEER-
ROR_SWITCH:
0,FAST_RETURN_LTE_BY_CELL_SELECT_SWIT
CH:
0,UL_DUAL_MODE_UE_D2P_OR_D2I_SWITCH:
0,PHYCHRECFG_ENH_RL_REEST_SWITCH:
0,RBRECFG_ENH_RL_REEST_SWITCH:
0,SMC_STOP_RLC_SWITCH:
1,GTP_SN_IN_RAB_REL_INIT_BY_UTRAN_SWI
TCH:1,CMP_IU_QOS_GTP_PDU_SN_SWITCH:
0,DL_TRB_RESET_BUFF_SWITCH:
0,RRC_CELLFACH_DL_TRB_RESET_TO_F2D_S
WITCH:
0,RAB_ASS_MOD_TNL_ADDR_SUP_SWITCH:1
DCH
State
(Type 2)
Inter
RNC
Cell
Update
Paging
UE in
Idle,
CELL_P
CH,
URA_P
CH
State
(Type 1)
DCH
State
(Type 2)
Inter
RNC
Cell
Update
Paging
UE in
Idle,
CELL_P
CH,
URA_P
CH
State
(Type 1)
31.
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH
Whether the RNC contains the MAC-hs reset
indicator information element (IE) in the PHYSICAL
CHANNEL RECONFIGURATION and RADIO
BEARER RECONFIGURATION messages for a reset
of the MAC-hs entity. The two messages are sent to a
UE when a service link over the Iur interface changes.
1: This switch is turned on. The RNC contains the
MAC-hs reset indicator IE in the two preceding
messages.
0: This switch is turned off. The RNC does not
contain the MAC-hs reset indicator IE in the two
preceding messages.
32. UL_INTEG_ALGO_COMPAT_SWITCH(UL
Integrity Compatibility Optimization Switch)
Reserved switch for security mode compatibility
handling. The bit field value is not internally used in
this version.
GUI Value Range:
PAGGING_NUM_CTRL_SWITCH(PAGGING_NU
M_CTRL_SWITCH),
ASU_RL_RESET_SWITCH(ASU_RL_RESET_SWI
TCH),
MC_RL_RESET_SWITCH(MC_RL_RESET_SWIT
CH),
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH(FD_PCH_REENTERSA_FORCE_RRC_REL_S
WITCH),
UE_CRC_COMPATIBLE_SWITCH(UE_CRC_COM
PATIBLE_SWITCH),
RNC_P2D_DRD_SWITCH(RNC_P2D_DRD_SWIT
CH), P2D_SWITCH(P2D_SWITCH),
AMR_F2D_OVERLAP_CELLUPT_SWITCH(AMR
_F2D_OVERLAP_CELLUPT_SWITCH),
SRB_RESET_RL_SETUP_SWITCH(SRB_RESET_
RL_SETUP_SWITCH),
RLFAIL_RL_SETUP_SWITCH(RLFAIL_RL_SETU
P_SWITCH),
CS_RL_SETUP_SWITCH(CS_RL_SETUP_SWITC
H),
PS_RL_SETUP_SWITCH(PS_RL_SETUP_SWITCH
),
UE_SRB_RESET_SWITCH(UE_SRB_RESET_SWI
TCH),
RL_RESTORE_SWITCH(RL_RESTORE_SWITCH)
,
RNC_EFD_D2F_SWITCH(RNC_EFD_D2F_SWITC
H),
RNC_RB_SCRI_NOT_DROP_SWITCH(RNC_RB_
SCRI_NOT_DROP_SWITCH),
RRC_RECONN_SWITCH(RRC_RECONN_SWITC
H),
RRC_REPEAT_PFM_SWITCH(RRC_REPEAT_PF
M_SWITCH),
F2D_NO_RSP_RRCREL_SWITCH(F2D_NO_RSP_
RRCREL_SWITCH),
CS_SETUP_P2D_SWITCH(CS_SETUP_P2D_SWIT
CH),
SYSHO_CIPHER_IE_SWITCH(SYSHO_CIPHER_I
E_SWITCH),
P2P_GTPU_NOT_CFG_SWITCH(P2P_GTPU_NOT
_CFG_SWITCH),
RB_SETUP_CIPHER_TIME_ADJ_SWITCH(RB_SE
TUP_CIPHER_TIME_ADJ_SWITCH),
CS_PRI_MOD_NOT_INT_SWITCH(CS_PRI_MOD
_NOT_INT_SWITCH),
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH(R
AB_SETUP_TMSI_REALLOC_BUF_SWITCH),
IU_FAULT_REL_PS_RES_SWITCH(IU_FAULT_R
EL_PS_RES_SWITCH),
RB_RECFG_RL_REEST_SWITCH(RB_RECFG_RL
_REEST_SWITCH),
F2P_DT_MSG_BUFFER_SWITCH(F2P_DT_MSG_
BUFFER_SWITCH),
SCRI_COMPATIBLE_SWITCH(SCRI_COMPATIBL
E_SWITCH),
GTPU_ERR_IND_DEF_SWITCH(GTPU_ERR_IND
_DEF_SWITCH),
IUR_SRV_CELL_CHG_MACHS_RESET_SWITC
H(IUR_SRV_CELL_CHG_MACHS_RESET_SWIT
CH),
UL_INTEG_ALGO_COMPAT_SWITCH(UL_INTE
G_ALGO_COMPAT_SWITCH)
Unit: None
Actual Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH,
UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH,
P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,
RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,
F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Default Value: PAGGING_NUM_CTRL_SWITCH:
0,ASU_RL_RESET_SWITCH:
0,MC_RL_RESET_SWITCH:
0,FD_PCH_REENTERSA_FORCE_RRC_REL_SWI
TCH:0,UE_CRC_COMPATIBLE_SWITCH:
0,RNC_P2D_DRD_SWITCH:0,P2D_SWITCH:
0,AMR_F2D_OVERLAP_CELLUPT_SWITCH:
0,SRB_RESET_RL_SETUP_SWITCH:
0,RLFAIL_RL_SETUP_SWITCH:
0,CS_RL_SETUP_SWITCH:
0,PS_RL_SETUP_SWITCH:
0,UE_SRB_RESET_SWITCH:
0,RL_RESTORE_SWITCH:
0,RNC_EFD_D2F_SWITCH:
1,RNC_RB_SCRI_NOT_DROP_SWITCH:
31.
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH
Whether the RNC contains the MAC-hs reset
indicator information element (IE) in the PHYSICAL
CHANNEL RECONFIGURATION and RADIO
BEARER RECONFIGURATION messages for a reset
of the MAC-hs entity. The two messages are sent to a
UE when a service link over the Iur interface changes.
1: This switch is turned on. The RNC contains the
MAC-hs reset indicator IE in the two preceding
messages.
0: This switch is turned off. The RNC does not
contain the MAC-hs reset indicator IE in the two
preceding messages.
32. UL_INTEG_ALGO_COMPAT_SWITCH(UL
Integrity Compatibility Optimization Switch)
Reserved switch for security mode compatibility
handling. The bit field value is not internally used in
this version.
GUI Value Range:
PAGGING_NUM_CTRL_SWITCH(PAGGING_NU
M_CTRL_SWITCH),
ASU_RL_RESET_SWITCH(ASU_RL_RESET_SWI
TCH),
MC_RL_RESET_SWITCH(MC_RL_RESET_SWIT
CH),
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH(FD_PCH_REENTERSA_FORCE_RRC_REL_S
WITCH),
UE_CRC_COMPATIBLE_SWITCH(UE_CRC_COM
PATIBLE_SWITCH),
RNC_P2D_DRD_SWITCH(RNC_P2D_DRD_SWIT
CH), P2D_SWITCH(P2D_SWITCH),
AMR_F2D_OVERLAP_CELLUPT_SWITCH(AMR
_F2D_OVERLAP_CELLUPT_SWITCH),
SRB_RESET_RL_SETUP_SWITCH(SRB_RESET_
RL_SETUP_SWITCH),
RLFAIL_RL_SETUP_SWITCH(RLFAIL_RL_SETU
P_SWITCH),
CS_RL_SETUP_SWITCH(CS_RL_SETUP_SWITC
H),
PS_RL_SETUP_SWITCH(PS_RL_SETUP_SWITCH
),
UE_SRB_RESET_SWITCH(UE_SRB_RESET_SWI
TCH),
RL_RESTORE_SWITCH(RL_RESTORE_SWITCH)
,
RNC_EFD_D2F_SWITCH(RNC_EFD_D2F_SWITC
H),
RNC_RB_SCRI_NOT_DROP_SWITCH(RNC_RB_
SCRI_NOT_DROP_SWITCH),
RRC_RECONN_SWITCH(RRC_RECONN_SWITC
H),
RRC_REPEAT_PFM_SWITCH(RRC_REPEAT_PF
M_SWITCH),
F2D_NO_RSP_RRCREL_SWITCH(F2D_NO_RSP_
RRCREL_SWITCH),
CS_SETUP_P2D_SWITCH(CS_SETUP_P2D_SWIT
CH),
SYSHO_CIPHER_IE_SWITCH(SYSHO_CIPHER_I
E_SWITCH),
P2P_GTPU_NOT_CFG_SWITCH(P2P_GTPU_NOT
_CFG_SWITCH),
RB_SETUP_CIPHER_TIME_ADJ_SWITCH(RB_SE
TUP_CIPHER_TIME_ADJ_SWITCH),
CS_PRI_MOD_NOT_INT_SWITCH(CS_PRI_MOD
_NOT_INT_SWITCH),
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH(R
AB_SETUP_TMSI_REALLOC_BUF_SWITCH),
IU_FAULT_REL_PS_RES_SWITCH(IU_FAULT_R
EL_PS_RES_SWITCH),
RB_RECFG_RL_REEST_SWITCH(RB_RECFG_RL
_REEST_SWITCH),
F2P_DT_MSG_BUFFER_SWITCH(F2P_DT_MSG_
BUFFER_SWITCH),
SCRI_COMPATIBLE_SWITCH(SCRI_COMPATIBL
E_SWITCH),
GTPU_ERR_IND_DEF_SWITCH(GTPU_ERR_IND
_DEF_SWITCH),
IUR_SRV_CELL_CHG_MACHS_RESET_SWITC
H(IUR_SRV_CELL_CHG_MACHS_RESET_SWIT
CH),
UL_INTEG_ALGO_COMPAT_SWITCH(UL_INTE
G_ALGO_COMPAT_SWITCH)
Unit: None
Actual Value Range:
PAGGING_NUM_CTRL_SWITCH,
ASU_RL_RESET_SWITCH,
MC_RL_RESET_SWITCH,
FD_PCH_REENTERSA_FORCE_RRC_REL_SWIT
CH,
UE_CRC_COMPATIBLE_SWITCH,
RNC_P2D_DRD_SWITCH,
P2D_SWITCH,
AMR_F2D_OVERLAP_CELLUPT_SWITCH,
SRB_RESET_RL_SETUP_SWITCH,
RLFAIL_RL_SETUP_SWITCH,
CS_RL_SETUP_SWITCH,
PS_RL_SETUP_SWITCH,
UE_SRB_RESET_SWITCH,
RL_RESTORE_SWITCH,
RNC_EFD_D2F_SWITCH,
RNC_RB_SCRI_NOT_DROP_SWITCH,
RRC_RECONN_SWITCH,
RRC_REPEAT_PFM_SWITCH,
F2D_NO_RSP_RRCREL_SWITCH,
CS_SETUP_P2D_SWITCH,
SYSHO_CIPHER_IE_SWITCH,
P2P_GTPU_NOT_CFG_SWITCH,
RB_SETUP_CIPHER_TIME_ADJ_SWITCH,
CS_PRI_MOD_NOT_INT_SWITCH,
RAB_SETUP_TMSI_REALLOC_BUF_SWITCH,
IU_FAULT_REL_PS_RES_SWITCH,
RB_RECFG_RL_REEST_SWITCH,
F2P_DT_MSG_BUFFER_SWITCH,
SCRI_COMPATIBLE_SWITCH,
GTPU_ERR_IND_DEF_SWITCH,
IUR_SRV_CELL_CHG_MACHS_RESET_SWITCH,
UL_INTEG_ALGO_COMPAT_SWITCH
Default Value: PAGGING_NUM_CTRL_SWITCH:
0,ASU_RL_RESET_SWITCH:
0,MC_RL_RESET_SWITCH:
0,FD_PCH_REENTERSA_FORCE_RRC_REL_SWI
TCH:0,UE_CRC_COMPATIBLE_SWITCH:
0,RNC_P2D_DRD_SWITCH:0,P2D_SWITCH:
0,AMR_F2D_OVERLAP_CELLUPT_SWITCH:
0,SRB_RESET_RL_SETUP_SWITCH:
0,RLFAIL_RL_SETUP_SWITCH:
0,CS_RL_SETUP_SWITCH:
0,PS_RL_SETUP_SWITCH:
0,UE_SRB_RESET_SWITCH:
0,RL_RESTORE_SWITCH:
0,RNC_EFD_D2F_SWITCH:
1,RNC_RB_SCRI_NOT_DROP_SWITCH:
PsInactT BSC690 SET WRFD- UE Meaning: Timer for FD-enabled UEs or LTE-enabled
mrForFs 0 UPSIN 010202 State in UEs staying in the CELL_FACH state. When UEs that
tDrmFac ACTTI WRFD- Connect are enabled with Fast Dormancy (FD) and stay in the
h MER 140226 ed Mode CELL_FACH state do not transmit any data after this
(CELL- timer expires, the RNC transits the UEs to the
WRFD- DCH, CELL_PCH state. When LTE-enabled UEs in the
020500 CELL- CELL_FACH state do not transmit any data after this
PCH, timer expires, the RNC transits the UEs to the
URA- CELL_PCH or IDLE state. You can set this timer to a
PCH, value other than 0 if you want to check whether FD-
CELL- enabled UEs and LTE-enabled UEs are in the
FACH) CELL_FACH state.
Fast GUI Value Range: 0~64800
Return Unit: s
from
UMTS Actual Value Range: 0~64800
to LTE Default Value: 5
Enhance
d Fast
Dorman
cy
PsInactT BSC691 SET WRFD- UE Meaning: Timer for FD-enabled UEs or LTE-enabled
mrForFs 0 UPSIN 010202 State in UEs staying in the CELL_FACH state. When UEs that
tDrmFac ACTTI WRFD- Connect are enabled with Fast Dormancy (FD) and stay in the
h MER 140226 ed Mode CELL_FACH state do not transmit any data after this
(CELL- timer expires, the RNC transits the UEs to the
WRFD- DCH, CELL_PCH state. When LTE-enabled UEs in the
020500 CELL- CELL_FACH state do not transmit any data after this
PCH, timer expires, the RNC transits the UEs to the
URA- CELL_PCH or IDLE state. You can set this timer to a
PCH, value other than 0 if you want to check whether FD-
CELL- enabled UEs and LTE-enabled UEs are in the
FACH) CELL_FACH state.
Fast GUI Value Range: 0~64800
Return Unit: s
from
UMTS Actual Value Range: 0~64800
to LTE Default Value: 5
Enhance
d Fast
Dorman
cy
PsInactT BSC690 SET WRFD- UE Meaning: Timer for FD-enabled UEs or LTE-enabled
mrForFs 0 UPSIN 010202 State in UEs staying in the CELL_DCH state. When UEs that
tDrmDc ACTTI WRFD- Connect are enabled with Fast Dormancy (FD) and stay in the
h MER 140226 ed Mode CELL_DCH state do not transmit any data after this
(CELL- timer expires, the RNC transits the UEs to the
WRFD- DCH, CELL_FACH or CELL_PCH state. When LTE-
020500 CELL- enabled UEs in the CELL_DCH state do not transmit
PCH, any data after this timer expires, the RNC transits the
URA- UEs to the CELL_PCH or IDLE state. You can set
PCH, this timer to a value other than 0 if you want to check
CELL- whether FD-enabled UEs and LTE-enabled UEs are in
FACH) the CELL_DCH state.
Fast GUI Value Range: 0~64800
Return Unit: s
from
UMTS Actual Value Range: 0~64800
to LTE Default Value: 4
Enhance
d Fast
Dorman
cy
PsInactT BSC691 SET WRFD- UE Meaning: Timer for FD-enabled UEs or LTE-enabled
mrForFs 0 UPSIN 010202 State in UEs staying in the CELL_DCH state. When UEs that
tDrmDc ACTTI WRFD- Connect are enabled with Fast Dormancy (FD) and stay in the
h MER 140226 ed Mode CELL_DCH state do not transmit any data after this
(CELL- timer expires, the RNC transits the UEs to the
WRFD- DCH, CELL_FACH or CELL_PCH state. When LTE-
020500 CELL- enabled UEs in the CELL_DCH state do not transmit
PCH, any data after this timer expires, the RNC transits the
URA- UEs to the CELL_PCH or IDLE state. You can set
PCH, this timer to a value other than 0 if you want to check
CELL- whether FD-enabled UEs and LTE-enabled UEs are in
FACH) the CELL_DCH state.
Fast GUI Value Range: 0~64800
Return Unit: s
from
UMTS Actual Value Range: 0~64800
to LTE Default Value: 4
Enhance
d Fast
Dorman
cy
3) PREEMPTED_PS_BE_DO_PARKING_SWITCH:
Whether the RNC switches preempted UEs that
process only PS BE services to the RB Parking state.
When this switch and the RB_PARKING_SWITCH
under the "CellConnAlgoSwitch1" parameter and the
"PreemptAlgoSwitch" parameter in the "SET
UQUEUEPREEMPT" command are all set to on, the
RNC switches preempted UEs that process only PS
BE services to the RB Parking state. When this switch
is set to off, the RNC applies the original processing
mechanism to preempted UEs that process only PS
BE services; for example, the RNC directly releases
the RRC connections of these UEs. The RB Parking
feature works as follows: The RNC switches a UE to
the CELL_FACH state and stops user-plane data
transmission for the UE. For details about RB
Parking, see the meaning of the
RB_PARKING_SWITCH under the
"CellConnAlgoSwitch1" parameter.
4) VIDEO_SHAPE_SWITCH: Whether to enable the
video shaping function for video services in a
cell.When this switch is set to on, video shaping is
enabled for an HSDPA UE in the cell if the RNC
detects that the UE is processing video services.When
this switch is set to off, video shaping is disabled for
the cell.
5) IDLE_DRD_BASED_COVER_SWITCH: If this
switch is turned on, the RNC proactively obtains the
RSCP of a UE, which sends an RRC request in idle
mode to establish new services when the RNC enables
the blind-handover-based DRD algorithm, and then
determines the UE coverage condition based on the
measured RSCP and target cell RTWP so as to filter
target cells with poor coverage. If this switch is turned
off, the RNC does not proactively obtain the RSCP of
a UE, which sends an RRC request in idle mode to
establish new services when the RNC enables the
blind-handover-based DRD algorithm.
6) C2D_DRD_BASED_COVER_SWITCH: If this
switch is turned on, the RNC proactively obtains the
RSCP of a UE, which send a request in the
CELL_PCH or CELL_FACH state to reconfigure
services or establish new services when the RNC
enables the blind-handover-based DRD algorithm, and
then determines the UE coverage condition based on
the measured RSCP and target cell RTWP to filter
target cells with poor coverage. If this switch is turned
off, the RNC does not proactively obtain the RSCP of
0,CONN_DRD_BASED_COVER_SWITCH:
0,MOVE_USER_PS_LIMIT_IND:0
3) PREEMPTED_PS_BE_DO_PARKING_SWITCH:
Whether the RNC switches preempted UEs that
process only PS BE services to the RB Parking state.
When this switch and the RB_PARKING_SWITCH
under the "CellConnAlgoSwitch1" parameter and the
"PreemptAlgoSwitch" parameter in the "SET
UQUEUEPREEMPT" command are all set to on, the
RNC switches preempted UEs that process only PS
BE services to the RB Parking state. When this switch
is set to off, the RNC applies the original processing
mechanism to preempted UEs that process only PS
BE services; for example, the RNC directly releases
the RRC connections of these UEs. The RB Parking
feature works as follows: The RNC switches a UE to
the CELL_FACH state and stops user-plane data
transmission for the UE. For details about RB
Parking, see the meaning of the
RB_PARKING_SWITCH under the
"CellConnAlgoSwitch1" parameter.
4) VIDEO_SHAPE_SWITCH: Whether to enable the
video shaping function for video services in a
cell.When this switch is set to on, video shaping is
enabled for an HSDPA UE in the cell if the RNC
detects that the UE is processing video services.When
this switch is set to off, video shaping is disabled for
the cell.
5) IDLE_DRD_BASED_COVER_SWITCH: If this
switch is turned on, the RNC proactively obtains the
RSCP of a UE, which sends an RRC request in idle
mode to establish new services when the RNC enables
the blind-handover-based DRD algorithm, and then
determines the UE coverage condition based on the
measured RSCP and target cell RTWP so as to filter
target cells with poor coverage. If this switch is turned
off, the RNC does not proactively obtain the RSCP of
a UE, which sends an RRC request in idle mode to
establish new services when the RNC enables the
blind-handover-based DRD algorithm.
6) C2D_DRD_BASED_COVER_SWITCH: If this
switch is turned on, the RNC proactively obtains the
RSCP of a UE, which send a request in the
CELL_PCH or CELL_FACH state to reconfigure
services or establish new services when the RNC
enables the blind-handover-based DRD algorithm, and
then determines the UE coverage condition based on
the measured RSCP and target cell RTWP to filter
target cells with poor coverage. If this switch is turned
off, the RNC does not proactively obtain the RSCP of
0,CONN_DRD_BASED_COVER_SWITCH:
0,MOVE_USER_PS_LIMIT_IND:0
CFG_DC_MIMO_DYNAMIC_SELECT_SWITCH,
CFG_DL_BLIND_DETECTION_SWITCH,
CFG_EDPCCH_BOOSTING_SWITCH,
CFG_FREE_USER_SWITCH,
CFG_HSDPA_64QAM_SWITCH,
CFG_HSDPA_DCMIMO_SWITCH,
CFG_HSDPA_DC_SWITCH,
CFG_HSDPA_MIMO_SWITCH,
CFG_HSDPA_MIMO_WITH_64QAM_SWITCH,
CFG_HSDPA_4C_MIMO_SWITCH,
CFG_HSDPA_4C_SWITCH,
CFG_HSDPA_DBMIMO_SWITCH,
CFG_HSDPA_DB_SWITCH,
CFG_HSPA_DTX_DRX_SWITCH,
CFG_HSPA_HSSCCH_LESS_OP_SWITCH,
CFG_HSUPA_16QAM_SWITCH,
CFG_HSUPA_DC_SWITCH,
CFG_IMS_SUPPORT_SWITCH,
CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITC
H, CFG_LOSSLESS_RELOC_CFG_SWITCH,
CFG_MULTI_RAB_SWITCH,
CFG_PDCP_IPV6_HEAD_COMPRESS_SWITCH,
CFG_PDCP_RFC2507_HC_SWITCH,
CFG_PDCP_RFC3095_HC_SWITCH,
CFG_PTT_SWITCH,
CFG_RAB_REL_RMV_HSPAPLUS_SWITCH,
CFG_RCS_E_SWITCH,
CFG_FACH_AM_RLC_RETRANSMIT_PARA_SWI
TCH,
CFG_DCH_SRB_AM_RLC_RETRANS_PARA_SW
ITCH, CFG_HSDPA_SFDC_SWITCH,
CFG_HSDPA_DF3C_SWITCH,
CFG_SRB_BICASTING_SWTICH
Default Value:
CFG_DC_MIMO_DYNAMIC_SELECT_SWITCH:
0,CFG_DL_BLIND_DETECTION_SWITCH:
1,CFG_EDPCCH_BOOSTING_SWITCH:
0,CFG_FREE_USER_SWITCH:
0,CFG_HSDPA_64QAM_SWITCH:
1,CFG_HSDPA_DCMIMO_SWITCH:
0,CFG_HSDPA_DC_SWITCH:
0,CFG_HSDPA_MIMO_SWITCH:
1,CFG_HSDPA_MIMO_WITH_64QAM_SWITCH:
0,CFG_HSDPA_4C_MIMO_SWITCH:
0,CFG_HSDPA_4C_SWITCH:
0,CFG_HSDPA_DBMIMO_SWITCH:
0,CFG_HSDPA_DB_SWITCH:
0,CFG_HSPA_DTX_DRX_SWITCH:
CFG_DC_MIMO_DYNAMIC_SELECT_SWITCH,
CFG_DL_BLIND_DETECTION_SWITCH,
CFG_EDPCCH_BOOSTING_SWITCH,
CFG_FREE_USER_SWITCH,
CFG_HSDPA_64QAM_SWITCH,
CFG_HSDPA_DCMIMO_SWITCH,
CFG_HSDPA_DC_SWITCH,
CFG_HSDPA_MIMO_SWITCH,
CFG_HSDPA_MIMO_WITH_64QAM_SWITCH,
CFG_HSDPA_4C_MIMO_SWITCH,
CFG_HSDPA_4C_SWITCH,
CFG_HSDPA_DBMIMO_SWITCH,
CFG_HSDPA_DB_SWITCH,
CFG_HSPA_DTX_DRX_SWITCH,
CFG_HSPA_HSSCCH_LESS_OP_SWITCH,
CFG_HSUPA_16QAM_SWITCH,
CFG_HSUPA_DC_SWITCH,
CFG_IMS_SUPPORT_SWITCH,
CFG_LOSSLESS_DLRLC_PDUSIZECHG_SWITC
H, CFG_LOSSLESS_RELOC_CFG_SWITCH,
CFG_MULTI_RAB_SWITCH,
CFG_PDCP_IPV6_HEAD_COMPRESS_SWITCH,
CFG_PDCP_RFC2507_HC_SWITCH,
CFG_PDCP_RFC3095_HC_SWITCH,
CFG_PTT_SWITCH,
CFG_RAB_REL_RMV_HSPAPLUS_SWITCH,
CFG_RCS_E_SWITCH,
CFG_FACH_AM_RLC_RETRANSMIT_PARA_SWI
TCH,
CFG_DCH_SRB_AM_RLC_RETRANS_PARA_SW
ITCH, CFG_HSDPA_SFDC_SWITCH,
CFG_HSDPA_DF3C_SWITCH,
CFG_SRB_BICASTING_SWTICH
Default Value:
CFG_DC_MIMO_DYNAMIC_SELECT_SWITCH:
0,CFG_DL_BLIND_DETECTION_SWITCH:
1,CFG_EDPCCH_BOOSTING_SWITCH:
0,CFG_FREE_USER_SWITCH:
0,CFG_HSDPA_64QAM_SWITCH:
1,CFG_HSDPA_DCMIMO_SWITCH:
0,CFG_HSDPA_DC_SWITCH:
0,CFG_HSDPA_MIMO_SWITCH:
1,CFG_HSDPA_MIMO_WITH_64QAM_SWITCH:
0,CFG_HSDPA_4C_MIMO_SWITCH:
0,CFG_HSDPA_4C_SWITCH:
0,CFG_HSDPA_DBMIMO_SWITCH:
0,CFG_HSDPA_DB_SWITCH:
0,CFG_HSPA_DTX_DRX_SWITCH:
WRFD- Traffic 14. DC_HSUPA: When this switch is turned on, the
010702 Class on DC-HSUPA function can be enabled for HSUPA
WRFD- HSDPA services.
010701 Interacti 15. HSDPA_4C_MIMO: Whether the MC-HSDPA
ve and +MIMO feature is allowed for HSDPA services.
WRFD-
Backgro When this switch is turned on, the MC-HSDPA
010609
und +MIMO (3C-HSDPA+MIMO and 4C-HSDPA
WRFD- Traffic +MIMO) feature is allowed for HSDPA services.
010510 Class on 16. HSDPA_4C: Whether the 3C-HSDPA or 4C-
WRFD- HSUPA HSDPA feature is allowed for HSDPA services. When
010688 DC- this switch is turned on, the 3C-HSDPA or 4C-
WRFD- HSUPA HSDPA feature is allowed for HSDPA services.
010686 Combin 17. DBMIMO_HSDPA: Whether the DB-HSDPA
ation of +MIMO feature is allowed for HSDPA services.
WRFD-
Two CS When this switch is turned on, the DB-HSDPA
010687
Services +MIMO feature is allowed for HSDPA services.
WRFD- (Except 18. DB_HSDPA: Whether the DB-HSDPA feature is
010684 for Two allowed for HSDPA services. When this switch is
WRFD- AMR turned on, the DB-HSDPA feature is allowed for
010685 Speech HSDPA services.
Services
WRFD- 19. HSDPA_SFDC(HSDPA_SFDC): Whether a cell
)
010683 supports the SFDC HSDPA function. When this
Combin switch is set to on, the cell supports the SFDC HSDPA
WRFD- ation of function. This switch is reserved for the MF-
021000 Two CS HSDPA(multiflow HSDPA) function and cannot be
WRFD- Services used in the current version.
010503 and One
20. HSDPA_DF3C(HSDPA_DF3C): Whether a cell
PS
WRFD- supports the DF3C HSDPA function. When this
Service
0106150 switch is set to on, the cell supports the DF3C HSDPA
(Except
2 function. This switch is reserved for the MF-
for Two
WRFD- HSDPA(multiflow HSDPA) function and cannot be
AMR
0106150 used in the current version.
Speech
3 Services GUI Value Range: 64QAM(Cell 64QAM Function
) Switch), MIMO(Cell MIMO Function Switch),
WRFD-
E_FACH(Cell E_FACH Function Switch),
010502 Combin
DTX_DRX(Cell DTX_DRX Function Switch),
WRFD- ation of
HS_SCCH_LESS_OPERATION(Cell HS_SCCH
0106150 One CS
LESS OPERATION Function Switch),
4 Service
DL_L2ENHANCED(Cell DL L2ENHANCED
and One
WRFD- Function Switch), 64QAM_MIMO(Cell 64QAM
PS
0106150 +MIMO Function Switch), UL_16QAM(Cell UL
Service
5 16QAM Function Switch), DC_HSDPA(Cell DC-
Enhance HSDPA Function Switch), UL_L2ENHANCED(Cell
WRFD- d DRX UL L2ENHANCED Function Switch),
170203 Uplink EDPCCH_BOOSTING(Cell E-DPCCH Boosting
WRFD- Enhance Function Switch), DCMIMO_HSDPA(Cell DC-
022000 d HSDPA Combined with MIMO Function Switch),
Transpo
rt
Channel
Manage
ment
Interacti
ve QoS
Class
Combin
ation of
One CS
Service
and Two
PS
Services
Combin
ation of
Three
PS
Services
Streami
ng QoS
Class
Combin
ation of
One CS
Service
and
Three
PS
Services
Combin
ation of
Four PS
Services
Uplink
Control
Channel
OLPC
Physical
Channel
Manage
ment
4C-
HSDPA
DB-
HSDPA
+MIMO
Flexible
Dual
Carrier
HSDPA
MC-
HSDPA
+MIMO
Logical
Channel
Manage
ment
DB-
HSDPA
Multiple
RAB
Packag
e(PS
RAB >=
2)
Streami
ng
Traffic
Class on
HSUPA
Streami
ng
Traffic
Class on
HSDPA
WRFD- Traffic 14. DC_HSUPA: When this switch is turned on, the
010702 Class on DC-HSUPA function can be enabled for HSUPA
WRFD- HSDPA services.
010701 Interacti 15. HSDPA_4C_MIMO: Whether the MC-HSDPA
ve and +MIMO feature is allowed for HSDPA services.
WRFD-
Backgro When this switch is turned on, the MC-HSDPA
010609
und +MIMO (3C-HSDPA+MIMO and 4C-HSDPA
WRFD- Traffic +MIMO) feature is allowed for HSDPA services.
010510 Class on 16. HSDPA_4C: Whether the 3C-HSDPA or 4C-
WRFD- HSUPA HSDPA feature is allowed for HSDPA services. When
010688 DC- this switch is turned on, the 3C-HSDPA or 4C-
WRFD- HSUPA HSDPA feature is allowed for HSDPA services.
010686 Combin 17. DBMIMO_HSDPA: Whether the DB-HSDPA
ation of +MIMO feature is allowed for HSDPA services.
WRFD-
Two CS When this switch is turned on, the DB-HSDPA
010687
Services +MIMO feature is allowed for HSDPA services.
WRFD- (Except 18. DB_HSDPA: Whether the DB-HSDPA feature is
010684 for Two allowed for HSDPA services. When this switch is
WRFD- AMR turned on, the DB-HSDPA feature is allowed for
010685 Speech HSDPA services.
Services
WRFD- 19. HSDPA_SFDC(HSDPA_SFDC): Whether a cell
)
010683 supports the SFDC HSDPA function. When this
Combin switch is set to on, the cell supports the SFDC HSDPA
WRFD- ation of function. This switch is reserved for the MF-
021000 Two CS HSDPA(multiflow HSDPA) function and cannot be
WRFD- Services used in the current version.
010503 and One
20. HSDPA_DF3C(HSDPA_DF3C): Whether a cell
PS
WRFD- supports the DF3C HSDPA function. When this
Service
0106150 switch is set to on, the cell supports the DF3C HSDPA
(Except
2 function. This switch is reserved for the MF-
for Two
WRFD- HSDPA(multiflow HSDPA) function and cannot be
AMR
0106150 used in the current version.
Speech
3 Services GUI Value Range: 64QAM(Cell 64QAM Function
) Switch), MIMO(Cell MIMO Function Switch),
WRFD-
E_FACH(Cell E_FACH Function Switch),
010502 Combin
DTX_DRX(Cell DTX_DRX Function Switch),
WRFD- ation of
HS_SCCH_LESS_OPERATION(Cell HS_SCCH
0106150 One CS
LESS OPERATION Function Switch),
4 Service
DL_L2ENHANCED(Cell DL L2ENHANCED
and One
WRFD- Function Switch), 64QAM_MIMO(Cell 64QAM
PS
0106150 +MIMO Function Switch), UL_16QAM(Cell UL
Service
5 16QAM Function Switch), DC_HSDPA(Cell DC-
Enhance HSDPA Function Switch), UL_L2ENHANCED(Cell
WRFD- d DRX UL L2ENHANCED Function Switch),
170203 Uplink EDPCCH_BOOSTING(Cell E-DPCCH Boosting
WRFD- Enhance Function Switch), DCMIMO_HSDPA(Cell DC-
022000 d HSDPA Combined with MIMO Function Switch),
Transpo
rt
Channel
Manage
ment
Interacti
ve QoS
Class
Combin
ation of
One CS
Service
and Two
PS
Services
Combin
ation of
Three
PS
Services
Streami
ng QoS
Class
Combin
ation of
One CS
Service
and
Three
PS
Services
Combin
ation of
Four PS
Services
Uplink
Control
Channel
OLPC
Physical
Channel
Manage
ment
4C-
HSDPA
DB-
HSDPA
+MIMO
Flexible
Dual
Carrier
HSDPA
MC-
HSDPA
+MIMO
Logical
Channel
Manage
ment
DB-
HSDPA
Multiple
RAB
Packag
e(PS
RAB >=
2)
Streami
ng
Traffic
Class on
HSUPA
Streami
ng
Traffic
Class on
HSDPA
LTEArf BSC690 ADD WRFD- PS Meaning: This parameter specifies the downlink
cn 0 ULTEC 020129 Service frequency used by an LTE cell. For detailed
ELL WRFD- Redirect description of the parameter, see 3GPP TS 36.104.
MOD 020126 ion from GUI Value Range: 0~65535
ULTEC UMTS
to LTE Unit: None
ELL
Mobility Actual Value Range: 0~65535
Between Default Value: None
UMTS
and LTE
Phase 1
LTEArf BSC691 ADD WRFD- PS Meaning: This parameter specifies the downlink
cn 0 ULTEC 020129 Service frequency used by an LTE cell. For detailed
ELL WRFD- Redirect description of the parameter, see 3GPP TS 36.104.
MOD 020126 ion from GUI Value Range: 0~65535
ULTEC UMTS
to LTE Unit: None
ELL
Mobility Actual Value Range: 0~65535
Between Default Value: None
UMTS
and LTE
Phase 1
LTECell BSC690 ADD WRFD- PS Meaning: This parameter specifies the index that
Index 0 ULTEN 020129 Service uniquely identifies an LTE cell.
CELL WRFD- Redirect GUI Value Range: 0~65535
MOD 020126 ion from
UMTS Unit: None
ULTEN
CELL to LTE Actual Value Range: 0~65535
LTECell BSC691 ADD WRFD- PS Meaning: This parameter specifies the index that
Index 0 ULTEN 020129 Service uniquely identifies an LTE cell.
CELL WRFD- Redirect GUI Value Range: 0~65535
MOD 020126 ion from
UMTS Unit: None
ULTEN
CELL to LTE Actual Value Range: 0~65535
Redirect 4.
ion from PERFENH_CM_STATE_FORBID_CHL_RETRY_S
UMTS WITCH: Whether a channel retry is prohibited when
to LTE the UE is performing measurement for service-based
Service- UMTS-to-LTE handovers or redirections in
Based compressed mode. When this switch is set to on, the
PS channel retry is prohibited. When this switch is set to
Handov off, the channel retry is allowed.
er from 5. PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH:
UMTS Whether the UE CAPABILITY ENQUIRY or RRC
to LTE CONNECTION SETUP message sent by RNC to the
AMR/W UE contains IEs with System specific capability
B-AMR update requirement set to GERAN or E-UTRA. These
Speech IEs indicate that UEs need to report their capability to
Rates access the GERAN and E-UTRA networks. When this
Control switch is set to on, the UE CAPABILITY ENQUIRY
or RRC CONNECTION SETUP message sent by
RNC to the UE contains the IEs with System specific
capability update requirement set to GERAN or E-
UTRA. When this switch is set to off, the UE
CAPABILITY ENQUIRY or RRC CONNECTION
SETUP message sent by RNC to the UE does not
contain such IEs.
6.
PERFENH_CU_RELOC_IN_CUC_MSG_CMP_SWI
TCH: Whether the RNC repetitively deletes the MAC-
ehs IDs of dedicated transport channels from the
CELL UPDATE CONFIRM message if the CELL
UPDATE message sent by a UE for the combined cell
update and relocation procedure contains common
channel information and MAC-ehs information of
dedicated transport channels. When this switch is set
to on, the RNC does not repetitively delete the MAC-
ehs IDs of dedicated transport channels from the
CELL UPDATE CONFIRM message. When this
switch is set to off, the RNC repetitively deletes the
MAC-ehs IDs of dedicated transport channels from
the CELL UPDATE CONFIRM message.
7. PERFENH_DIVERSITY_PARA_OPT_SWITCH:
Whether to solve the problem of radio link setup and
radio link reconfiguration failures caused by incorrect
diversity parameters carried in Iub interface messages.
When this switch is set to on, the RNC solves the
problem of incorrect diversity parameters carried in
Iub interface messages. When this switch is set to off,
the RNC does not solve the problem of incorrect
diversity parameters carried in Iub interface messages.
8.
PERFENH_COMACROMICRO_HHO_OPT_SWIT
CH: Whether the RNC considers the DRD policy
when selecting cells for inter-frequency blind
handovers between macro and micro networks. When
this switch is set to on, the RNC does not consider the
DRD policy when selecting inter-frequency blind
handover neighboring cells. When this switch is set to
off, the RNC considers the DRD policy when
selecting inter-frequency blind handover neighboring
cells.
9.
PERFENH_AMRC_IUB_BW_RSP_PROC_OPT_S
WITCH: Switch for handling multiple rate
adjustments mistakenly initiated due to abnormal
processing of response messages for Iub bandwidth
applications during adaptive multi rate control
(AMRC). When this switch is set to on, if the RNC
applies for the Iub bandwidth resources for multiple
NodeBs during AMRC, only one rate adjustment is
initiated after receipt of the Iub bandwidth response
messages. When this switch is set to off, multiple rate
adjustments are mistakenly initiated in the preceding
scenario.
10.
PERFENH_AMR_SRNSR_IN_CHECK_SWITCH:
Whether the RNC performs parameter setting checks
during static relocation for AMR services. 1: When
this switch is set to on, the RNC checks whether the
attribute of the AMR service is correct and whether
the rate set corresponding to the IuUP version is
correct during an incoming AMR static relocation. If
not, the RNC returns a static relocation failure
message. 0: When this switch is set to off, the RNC
does not check parameter settings during incoming
static relocation for AMR services.
11. PERFENH_NCELL_ORDER_OPT_SWITCH:
Whether to optimize the order of intra-frequency
neighboring cells and the order of inter-frequency
neighboring cells of a cell. When this switch is set to
on, the RNC arranges neighboring cells of a cell on a
basis of five cells every 3s, that is, the RNC
preferentially arranges neighboring cells in ascending
order of neighboring cell priorities (Nprio). If the
neighboring cells have the same priority, the RNC
arranges neighboring cells in ascending order of cell
ID. When this switch is set to off, the RNC does not
optimize the order of neighboring cells of a cell.
12.
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H: Whether the RNC imposes penalty on service-
based LTE measurement if the previous service-based
measurement control release is not triggered by
measurement control expiry. The duration of the
penalty is set by the "U2LServMcTimeOutPunish-
Time" parameter. 1: When this switch is set to on, the
RNC imposes penalty on service-based LTE
measurement only when the previous service-based
LTE measurement control release is triggered by
measurement control expiry. 0: When this switch is set
to off, the RNC imposes penalty on all types of
service-based LTE measurement control release.
13. PERFENH_DCCC_INIT_RATE_OPT_SWITCH:
Whether the RNC sets the uplink rate of PS BE
services to the initial access rate during an HSUPA
reconfiguration not triggered by DCCC or HSPA retry
when the HSUPA DCCC switch is set to on. BE is
short for best effort and DCCC is short for dynamic
channel configuration control. When this switch is set
to on, the RNC sets the uplink rate of PS BE services
to a smaller value between the current rate and the
maximum rate supported by the target cell. When this
switch is set to off, the RNC sets the uplink rate of PS
BE services to the initial access rate.
14.
PERFENH_FORBIDDEN_DRD_WHEN_LTE_MEA
S: Whether a UE that is performing an LTE
measurement can use the periodic DRD algorithm to
adjust its channel type. 1: This switch is turned on.
The UE cannot use the periodic DRD algorithm to
adjust its channel type. 0: This switch is turned off.
The UE can use the periodic DRD algorithm to adjust
its channel type.
15.
PERFENH_AGPS_MR_USE_BLK_OR_WHTLST_
SWITCH: Whether to use the whitelist or blacklist
policy for the A-GPS MR function.
1: When this switch is set to on, the whitelist policy is
used for A-GPS MR, that is, the
SPECUSER_AGPS_MEAS_DISABLED_SWITCH
under the "SpecUserFunctionSwitch3" parameter in
the "ADD UIMEITAC" command becomes
ineffective and the
SPECUSER_AGPS_MEAS_ENABLED_SWITCH
becomes effective.
19.PERFENH_FACH_RELOC_IN_CUC_OPT_SWI
TCH: Whether the RNC performs compatibility
processing on abnormal MAC-d flows contained in
the RELOCATION REQUEST message during the
combined cell update and SRNS relocation initiated
by UEs complying with Release 5 or Release 6 in
non-CELL_DCH state.
1: This switch is turned on. The RNC performs
compatibility processing.
0: This switch is turned off. The RNC does not
perform compatibility processing.
20.PERFENH_DRNC_MR_REPORT_SWITCH:
Whether UEs whose best cell is a DRNC cell can
report MRs.
1: When this switch is set to on, UEs whose best cell
is a DRNC cell can report MRs.
0: When this switch is set to off, UEs whose best cell
is a DRNC cell cannot report MRs.
21.
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH: Whether the RNC delivers A-GPS
measurement control messages to UEs that are
undergoing an incoming relocation if these UEs are in
the MR A-GPS blacklist. When this switch is set to
on, the RNC does not deliver MR A-GPS
measurement control messages to UEs that are
undergoing an incoming relocation if these UEs are in
the MR A-GPS blacklist. When this switch is set to
off, the RNC delivers MR A-GPS measurement
control messages to UEs that are undergoing an
incoming relocation if these UEs are in the MR A-
GPS blacklist.
22.
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH: Whether the RNC considers the number of
High Speed Packet Access (HSPA) users to determine
the transmission channel for PS services when UEs
performing CS+PS combined services experience a
combined hard handover and SRNS relocation.
1: This switch is turned on. In the case of insufficient
HSPA users, the RNC chooses to transmit PS services
over the DCH.
0: This switch is turned off. The RNC does not
considers the number of HSPA users to determine the
transmission channel for PS services.
23. PERFENH_AMR_CUC_TFI_OPT_SWITCH:
Whether the CELL UPDATE CONFIRM message
sent by the RNC carries the transport format indicator
(TFI) information of UEs having experienced AMRC
rate reduction.
1: This switch is turned on and the CELL UPDATE
CONFIRM message carries the TFI information of
those UEs.
0: This switch is turned off and the CELL UPDATE
CONFIRM message does not carry the TFI
information of those UEs.
24.
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH: Whether the AMRC uplink rate adjustment
optimization function takes effect.
1: This switch is turned on and the RNC performs the
following operations:
If L3 receives a confirmation about TFC CTRL
message from the L2 RLC layer, the RNC starts the
TFC CTRL FAIL (TRANSPORT FORMAT
COMBINATION CONTROL FAILURE) message
waiting timer. If the RNC has not received the TFC
CTRL FAIL message before the timer expires, the
RNC considers the UE uplink rate adjustment
successful when the timer expires. If L3 does not
receive a confirmation about TFC CTRL message
from the L2 RLC layer or the UE responds with the
TFC CTRL FAIL message, the RNC considers the UE
uplink rate adjustment failed.
0: This switch is turned off. If the UE does not
respond with a TFC CTRL FAIL message and the
uplink rate adjustment timer expires, the RNC
considers the rate adjustment successful by default.
25.
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH: Whether the Rate Control ACK message sent
by the RNC carries the local maximum downlink rate
or the local current downlink rate in AMR services
when the protocol CR0125 takes effect.
1: This switch is turned on and the Rate Control ACK
message sent by the RNC to the CN carries the local
maximum downlink rate.
0: This switch is turned off and the Rate Control ACK
message sent by the RNC to the CN carries the local
current downlink rate.
26.
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H: Whether the DRNC sends a service area identifier-
based (SAI-based) location report to the CN during a
UE relocation process.
1: This switch is turned on. The RNC sends an SAI-
based location report only after a UE relocation
process completes, even though the RNC has received
an SAI-based location request from the CN during the
UE relocation process.
0: This switch is turned off. The RNC sends an SAI-
based location report if requested during the UE
relocation process.
27.
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW: Method of calculating the ratio of measurement-
based directed retry (MBDR) UEs in outgoing inter-
RAT handovers. When this switch is turned on, the
ratio of MBDR UEs in outgoing inter-RAT handovers
is decided based on the comparison between a random
number and the maximum percentage of MBDR UEs
in outgoing handovers. When this switch is turned off,
the ratio of MBDR UEs in outgoing inter-RAT
handovers is decided by the maximum percentage of
MBDR UEs in outgoing handovers.
28. PERFENH_EDCH_OLPC_MC_OPT_SWITCH:
Whether the RNC clears the power control-based
measurement control of E-DCH after a handover of a
UE that does not perform HSUPA BE services is
complete. E-DCH power control-based measurement
control includes measurement control for the
following two algorithms: adaptive adjustment of the
target number of small retransmissions by HSUPA
UEs and adaptive adjustment of power offset of the
HSUPA data channel. When the algorithm for
adaptive adjustment of the target number of small
retransmissions by HSUPA UEs or that for adaptive
adjustment of power offset of the HSUPA data
channel is enabled, it is recommended that this switch
be turned on.
1: This switch is turned on. The RNC clears the power
control-based measurement control of E-DCH after a
handover of a UE that does not perform HSUPA BE
services is complete.
0: This switch is turned off. The RNC does not clear
the power control-based measurement control of E-
SWITCH,
PERFENH_SRB_H2D_D2P2D_OPT_SWITCH,
PERFENH_IUB_MR_USING_EXT_ITF_SWITCH,
PERFENH_FACH_TVM_MC_TIME_OPT_SWITC
H,
PERFENH_FACH_RELOC_IN_CUC_OPT_SWITC
H, PERFENH_DRNC_MR_REPORT_SWITCH,
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH,
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH, PERFENH_AMR_CUC_TFI_OPT_SWITCH,
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH,
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH,
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H,
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW,
PERFENH_EDCH_OLPC_MC_OPT_SWITCH,
PERFENH_ADJACENT_INDEX_SMOOTH_SWIT
CH,
PERFENH_SEND_CTFC_WHEN_NO_CHANGE_S
WITCH
Unit: None
Actual Value Range:
PERFENH_U2L_PUNISH_HOLD_WHEN_DF2P_S
WITCH,
PERFENH_IUCS_REL_TRIG_U2L_SERV_OP_SWI
TCH,
PERFENH_CM_STATE_FORBID_CHL_RETRY_S
WITCH,
PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH,
PERFENH_CU_RELOC_IN_CUC_MSG_CMP_SWI
TCH,
PERFENH_DIVERSITY_PARA_OPT_SWITCH,
PERFENH_COMACROMICRO_HHO_OPT_SWIT
CH,
PERFENH_AMRC_IUB_BW_RSP_PROC_OPT_S
WITCH,
PERFENH_AMR_SRNSR_IN_CHECK_SWITCH,
PERFENH_NCELL_ORDER_OPT_SWITCH,
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H,
PERFENH_DCCC_INIT_RATE_OPT_SWITCH,
PERFENH_FORBIDDEN_DRD_WHEN_LTE_MEA
S,
PERFENH_AGPS_MR_USE_BLK_OR_WHTLST_
SWITCH,
PERFENH_SRB_H2D_D2P2D_OPT_SWITCH,
PERFENH_IUB_MR_USING_EXT_ITF_SWITCH,
PERFENH_FACH_TVM_MC_TIME_OPT_SWITC
H,
PERFENH_FACH_RELOC_IN_CUC_OPT_SWITC
H,
PERFENH_DRNC_MR_REPORT_SWITCH,
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH,
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH,
PERFENH_AMR_CUC_TFI_OPT_SWITCH,
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH,
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH,
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H,
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW,
PERFENH_EDCH_OLPC_MC_OPT_SWITCH,
PERFENH_ADJACENT_INDEX_SMOOTH_SWIT
CH,
PERFENH_SEND_CTFC_WHEN_NO_CHANGE_S
WITCH
Default Value:
PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPA
GING:
0,PERFENH_U2L_PUNISH_HOLD_WHEN_DF2P_
SWITCH:
0,PERFENH_IUCS_REL_TRIG_U2L_SERV_OP_S
WITCH:
0,PERFENH_CM_STATE_FORBID_CHL_RETRY_
SWITCH:
0,PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH:
0,PERFENH_CU_RELOC_IN_CUC_MSG_CMP_S
WITCH:
1,PERFENH_DIVERSITY_PARA_OPT_SWITCH:
0,PERFENH_COMACROMICRO_HHO_OPT_SWI
TCH:
PS 4.
Handov PERFENH_CM_STATE_FORBID_CHL_RETRY_S
er from WITCH: Whether a channel retry is prohibited when
UMTS the UE is performing measurement for service-based
to LTE UMTS-to-LTE handovers or redirections in
AMR/W compressed mode. When this switch is set to on, the
B-AMR channel retry is prohibited. When this switch is set to
Speech off, the channel retry is allowed.
Rates 5. PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH:
Control Whether the UE CAPABILITY ENQUIRY or RRC
CONNECTION SETUP message sent by RNC to the
UE contains IEs with System specific capability
update requirement set to GERAN or E-UTRA. These
IEs indicate that UEs need to report their capability to
access the GERAN and E-UTRA networks. When this
switch is set to on, the UE CAPABILITY ENQUIRY
or RRC CONNECTION SETUP message sent by
RNC to the UE contains the IEs with System specific
capability update requirement set to GERAN or E-
UTRA. When this switch is set to off, the UE
CAPABILITY ENQUIRY or RRC CONNECTION
SETUP message sent by RNC to the UE does not
contain such IEs.
6.
PERFENH_CU_RELOC_IN_CUC_MSG_CMP_SWI
TCH: Whether the RNC repetitively deletes the MAC-
ehs IDs of dedicated transport channels from the
CELL UPDATE CONFIRM message if the CELL
UPDATE message sent by a UE for the combined cell
update and relocation procedure contains common
channel information and MAC-ehs information of
dedicated transport channels. When this switch is set
to on, the RNC does not repetitively delete the MAC-
ehs IDs of dedicated transport channels from the
CELL UPDATE CONFIRM message. When this
switch is set to off, the RNC repetitively deletes the
MAC-ehs IDs of dedicated transport channels from
the CELL UPDATE CONFIRM message.
7. PERFENH_DIVERSITY_PARA_OPT_SWITCH:
Whether to solve the problem of radio link setup and
radio link reconfiguration failures caused by incorrect
diversity parameters carried in Iub interface messages.
When this switch is set to on, the RNC solves the
problem of incorrect diversity parameters carried in
Iub interface messages. When this switch is set to off,
the RNC does not solve the problem of incorrect
diversity parameters carried in Iub interface messages.
8.
PERFENH_COMACROMICRO_HHO_OPT_SWIT
CH: Whether the RNC considers the DRD policy
when selecting cells for inter-frequency blind
handovers between macro and micro networks. When
this switch is set to on, the RNC does not consider the
DRD policy when selecting inter-frequency blind
handover neighboring cells. When this switch is set to
off, the RNC considers the DRD policy when
selecting inter-frequency blind handover neighboring
cells.
9.
PERFENH_AMRC_IUB_BW_RSP_PROC_OPT_S
WITCH: Switch for handling multiple rate
adjustments mistakenly initiated due to abnormal
processing of response messages for Iub bandwidth
applications during adaptive multi rate control
(AMRC). When this switch is set to on, if the RNC
applies for the Iub bandwidth resources for multiple
NodeBs during AMRC, only one rate adjustment is
initiated after receipt of the Iub bandwidth response
messages. When this switch is set to off, multiple rate
adjustments are mistakenly initiated in the preceding
scenario.
10.
PERFENH_AMR_SRNSR_IN_CHECK_SWITCH:
Whether the RNC performs parameter setting checks
during static relocation for AMR services. 1: When
this switch is set to on, the RNC checks whether the
attribute of the AMR service is correct and whether
the rate set corresponding to the IuUP version is
correct during an incoming AMR static relocation. If
not, the RNC returns a static relocation failure
message. 0: When this switch is set to off, the RNC
does not check parameter settings during incoming
static relocation for AMR services.
11. PERFENH_NCELL_ORDER_OPT_SWITCH:
Whether to optimize the order of intra-frequency
neighboring cells and the order of inter-frequency
neighboring cells of a cell. When this switch is set to
on, the RNC arranges neighboring cells of a cell on a
basis of five cells every 3s, that is, the RNC
preferentially arranges neighboring cells in ascending
order of neighboring cell priorities (Nprio). If the
neighboring cells have the same priority, the RNC
arranges neighboring cells in ascending order of cell
ID. When this switch is set to off, the RNC does not
optimize the order of neighboring cells of a cell.
12.
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H: Whether the RNC imposes penalty on service-
based LTE measurement if the previous service-based
measurement control release is not triggered by
measurement control expiry. The duration of the
penalty is set by the "U2LServMcTimeOutPunish-
Time" parameter. 1: When this switch is set to on, the
RNC imposes penalty on service-based LTE
measurement only when the previous service-based
LTE measurement control release is triggered by
measurement control expiry. 0: When this switch is set
to off, the RNC imposes penalty on all types of
service-based LTE measurement control release.
13. PERFENH_DCCC_INIT_RATE_OPT_SWITCH:
Whether the RNC sets the uplink rate of PS BE
services to the initial access rate during an HSUPA
reconfiguration not triggered by DCCC or HSPA retry
when the HSUPA DCCC switch is set to on. BE is
short for best effort and DCCC is short for dynamic
channel configuration control. When this switch is set
to on, the RNC sets the uplink rate of PS BE services
to a smaller value between the current rate and the
maximum rate supported by the target cell. When this
switch is set to off, the RNC sets the uplink rate of PS
BE services to the initial access rate.
14.
PERFENH_FORBIDDEN_DRD_WHEN_LTE_MEA
S: Whether a UE that is performing an LTE
measurement can use the periodic DRD algorithm to
adjust its channel type. 1: This switch is turned on.
The UE cannot use the periodic DRD algorithm to
adjust its channel type. 0: This switch is turned off.
The UE can use the periodic DRD algorithm to adjust
its channel type.
15.
PERFENH_AGPS_MR_USE_BLK_OR_WHTLST_
SWITCH: Whether to use the whitelist or blacklist
policy for the A-GPS MR function.
1: When this switch is set to on, the whitelist policy is
used for A-GPS MR, that is, the
SPECUSER_AGPS_MEAS_DISABLED_SWITCH
under the "SpecUserFunctionSwitch3" parameter in
the "ADD UIMEITAC" command becomes
ineffective and the
SPECUSER_AGPS_MEAS_ENABLED_SWITCH
becomes effective.
19.PERFENH_FACH_RELOC_IN_CUC_OPT_SWI
TCH: Whether the RNC performs compatibility
processing on abnormal MAC-d flows contained in
the RELOCATION REQUEST message during the
combined cell update and SRNS relocation initiated
by UEs complying with Release 5 or Release 6 in
non-CELL_DCH state.
1: This switch is turned on. The RNC performs
compatibility processing.
0: This switch is turned off. The RNC does not
perform compatibility processing.
20.PERFENH_DRNC_MR_REPORT_SWITCH:
Whether UEs whose best cell is a DRNC cell can
report MRs.
1: When this switch is set to on, UEs whose best cell
is a DRNC cell can report MRs.
0: When this switch is set to off, UEs whose best cell
is a DRNC cell cannot report MRs.
21.
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH: Whether the RNC delivers A-GPS
measurement control messages to UEs that are
undergoing an incoming relocation if these UEs are in
the MR A-GPS blacklist. When this switch is set to
on, the RNC does not deliver MR A-GPS
measurement control messages to UEs that are
undergoing an incoming relocation if these UEs are in
the MR A-GPS blacklist. When this switch is set to
off, the RNC delivers MR A-GPS measurement
control messages to UEs that are undergoing an
incoming relocation if these UEs are in the MR A-
GPS blacklist.
22.
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH: Whether the RNC considers the number of
High Speed Packet Access (HSPA) users to determine
the transmission channel for PS services when UEs
performing CS+PS combined services experience a
combined hard handover and SRNS relocation.
1: This switch is turned on. In the case of insufficient
HSPA users, the RNC chooses to transmit PS services
over the DCH.
0: This switch is turned off. The RNC does not
considers the number of HSPA users to determine the
transmission channel for PS services.
23. PERFENH_AMR_CUC_TFI_OPT_SWITCH:
Whether the CELL UPDATE CONFIRM message
sent by the RNC carries the transport format indicator
(TFI) information of UEs having experienced AMRC
rate reduction.
1: This switch is turned on and the CELL UPDATE
CONFIRM message carries the TFI information of
those UEs.
0: This switch is turned off and the CELL UPDATE
CONFIRM message does not carry the TFI
information of those UEs.
24.
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH: Whether the AMRC uplink rate adjustment
optimization function takes effect.
1: This switch is turned on and the RNC performs the
following operations:
If L3 receives a confirmation about TFC CTRL
message from the L2 RLC layer, the RNC starts the
TFC CTRL FAIL (TRANSPORT FORMAT
COMBINATION CONTROL FAILURE) message
waiting timer. If the RNC has not received the TFC
CTRL FAIL message before the timer expires, the
RNC considers the UE uplink rate adjustment
successful when the timer expires. If L3 does not
receive a confirmation about TFC CTRL message
from the L2 RLC layer or the UE responds with the
TFC CTRL FAIL message, the RNC considers the UE
uplink rate adjustment failed.
0: This switch is turned off. If the UE does not
respond with a TFC CTRL FAIL message and the
uplink rate adjustment timer expires, the RNC
considers the rate adjustment successful by default.
25.
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH: Whether the Rate Control ACK message sent
by the RNC carries the local maximum downlink rate
or the local current downlink rate in AMR services
when the protocol CR0125 takes effect.
1: This switch is turned on and the Rate Control ACK
message sent by the RNC to the CN carries the local
maximum downlink rate.
0: This switch is turned off and the Rate Control ACK
message sent by the RNC to the CN carries the local
current downlink rate.
26.
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H: Whether the DRNC sends a service area identifier-
based (SAI-based) location report to the CN during a
UE relocation process.
1: This switch is turned on. The RNC sends an SAI-
based location report only after a UE relocation
process completes, even though the RNC has received
an SAI-based location request from the CN during the
UE relocation process.
0: This switch is turned off. The RNC sends an SAI-
based location report if requested during the UE
relocation process.
27.
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW: Method of calculating the ratio of measurement-
based directed retry (MBDR) UEs in outgoing inter-
RAT handovers. When this switch is turned on, the
ratio of MBDR UEs in outgoing inter-RAT handovers
is decided based on the comparison between a random
number and the maximum percentage of MBDR UEs
in outgoing handovers. When this switch is turned off,
the ratio of MBDR UEs in outgoing inter-RAT
handovers is decided by the maximum percentage of
MBDR UEs in outgoing handovers.
28. PERFENH_EDCH_OLPC_MC_OPT_SWITCH:
Whether the RNC clears the power control-based
measurement control of E-DCH after a handover of a
UE that does not perform HSUPA BE services is
complete. E-DCH power control-based measurement
control includes measurement control for the
following two algorithms: adaptive adjustment of the
target number of small retransmissions by HSUPA
UEs and adaptive adjustment of power offset of the
HSUPA data channel. When the algorithm for
adaptive adjustment of the target number of small
retransmissions by HSUPA UEs or that for adaptive
adjustment of power offset of the HSUPA data
channel is enabled, it is recommended that this switch
be turned on.
1: This switch is turned on. The RNC clears the power
control-based measurement control of E-DCH after a
handover of a UE that does not perform HSUPA BE
services is complete.
0: This switch is turned off. The RNC does not clear
the power control-based measurement control of E-
SWITCH,
PERFENH_SRB_H2D_D2P2D_OPT_SWITCH,
PERFENH_IUB_MR_USING_EXT_ITF_SWITCH,
PERFENH_FACH_TVM_MC_TIME_OPT_SWITC
H,
PERFENH_FACH_RELOC_IN_CUC_OPT_SWITC
H, PERFENH_DRNC_MR_REPORT_SWITCH,
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH,
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH, PERFENH_AMR_CUC_TFI_OPT_SWITCH,
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH,
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH,
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H,
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW,
PERFENH_EDCH_OLPC_MC_OPT_SWITCH,
PERFENH_ADJACENT_INDEX_SMOOTH_SWIT
CH,
PERFENH_SEND_CTFC_WHEN_NO_CHANGE_S
WITCH
Unit: None
Actual Value Range:
PERFENH_U2L_PUNISH_HOLD_WHEN_DF2P_S
WITCH,
PERFENH_IUCS_REL_TRIG_U2L_SERV_OP_SWI
TCH,
PERFENH_CM_STATE_FORBID_CHL_RETRY_S
WITCH,
PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH,
PERFENH_CU_RELOC_IN_CUC_MSG_CMP_SWI
TCH,
PERFENH_DIVERSITY_PARA_OPT_SWITCH,
PERFENH_COMACROMICRO_HHO_OPT_SWIT
CH,
PERFENH_AMRC_IUB_BW_RSP_PROC_OPT_S
WITCH,
PERFENH_AMR_SRNSR_IN_CHECK_SWITCH,
PERFENH_NCELL_ORDER_OPT_SWITCH,
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H,
PERFENH_DCCC_INIT_RATE_OPT_SWITCH,
PERFENH_FORBIDDEN_DRD_WHEN_LTE_MEA
S,
PERFENH_AGPS_MR_USE_BLK_OR_WHTLST_
SWITCH,
PERFENH_SRB_H2D_D2P2D_OPT_SWITCH,
PERFENH_IUB_MR_USING_EXT_ITF_SWITCH,
PERFENH_FACH_TVM_MC_TIME_OPT_SWITC
H,
PERFENH_FACH_RELOC_IN_CUC_OPT_SWITC
H,
PERFENH_DRNC_MR_REPORT_SWITCH,
PERFENH_RELOC_UE_AGPS_MR_DISABLE_SW
ITCH,
PERFENH_CSPS_RELOCIN_HUSERS_LIMIT_SW
ITCH,
PERFENH_AMR_CUC_TFI_OPT_SWITCH,
PERFENH_AMR_TFC_CTRL_QUICK_RESP_SWI
TCH,
PERFENH_RATE_CTRL_ACK_MAX_MODE_SWI
TCH,
PERFENH_LCS_IN_RELOC_PROC_OPT_SWITC
H,
PERFENH_MBDR_INTER_RAT_HO_RATIO_OPT
_SW,
PERFENH_EDCH_OLPC_MC_OPT_SWITCH,
PERFENH_ADJACENT_INDEX_SMOOTH_SWIT
CH,
PERFENH_SEND_CTFC_WHEN_NO_CHANGE_S
WITCH
Default Value:
PERFENH_U2L_SERV_NOT_TRIG_WHEN_CSPA
GING:
0,PERFENH_U2L_PUNISH_HOLD_WHEN_DF2P_
SWITCH:
0,PERFENH_IUCS_REL_TRIG_U2L_SERV_OP_S
WITCH:
0,PERFENH_CM_STATE_FORBID_CHL_RETRY_
SWITCH:
0,PERFENH_UE_CAP_ENQUIRY_OPT_SWITCH:
0,PERFENH_CU_RELOC_IN_CUC_MSG_CMP_S
WITCH:
1,PERFENH_DIVERSITY_PARA_OPT_SWITCH:
0,PERFENH_COMACROMICRO_HHO_OPT_SWI
TCH:
EUTRA BSC690 ADD WRFD- PS Meaning: This parameter specifies whether to allow
NSHIN 0 UTYPR 020129 Service the service-based handover of UEs from UMTS to
D ABBAS WRFD- Redirect LTE.
IC 020126 ion from GUI Value Range:
MOD UMTS HO_TO_EUTRAN_SHOULD_BE_PERFORM,
UTYPR to LTE HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
ABBAS Mobility Unit: None
IC Between
UMTS Actual Value Range:
and LTE HO_TO_EUTRAN_SHOULD_BE_PERFORM,
Phase 1 HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
Default Value:
HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
EUTRA BSC691 ADD WRFD- PS Meaning: This parameter specifies whether to allow
NSHIN 0 UTYPR 020129 Service the service-based handover of UEs from UMTS to
D ABBAS WRFD- Redirect LTE.
IC 020126 ion from GUI Value Range:
MOD UMTS HO_TO_EUTRAN_SHOULD_BE_PERFORM,
UTYPR to LTE HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
ABBAS Mobility Unit: None
IC Between
UMTS Actual Value Range:
and LTE HO_TO_EUTRAN_SHOULD_BE_PERFORM,
Phase 1 HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
Default Value:
HO_TO_EUTRAN_SHALL_NOT_BE_PERFORM
HO_LTE_SERVICE_PSHO_OUT_SWITCH,
HO_INTER_RAT_CS_OUT_SWITCH,
HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_S
WITCH,
HO_INTER_RAT_PS_3G2G_RELOCATION_SWIT
CH, HO_INTER_RAT_PS_OUT_SWITCH,
HO_INTER_RAT_RNC_SERVICE_HO_SWITCH,
HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWI
TCH,
HO_INTRA_FREQ_DETSET_RPRT_SWITCH,
HO_INTRA_FREQ_HARD_HO_SWITCH,
HO_INTRA_FREQ_RPRT_1J_SWITCH,
HO_INTRA_FREQ_SOFT_HO_SWITCH,
HO_MC_MEAS_BEYOND_UE_CAP_SWITCH,
HO_MC_NCELL_COMBINE_SWITCH,
HO_MC_SIGNAL_IUR_INTRA_SWITCH,
HO_MC_SIGNAL_SWITCH,
HO_MC_SNA_RESTRICTION_SWITCH,
HO_LTE_PS_OUT_SWITCH,
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_H2G_SRVCC_SWITCH,
HO_INTRA_FREQ_HIGHPRIOR_2D2F_SWITCH,
HO_CIO_1D_USED,
HO_HCS_SPD_INI_BSD_UE_SWITCH,
HO_L2U_EMGCALL_SWITCH,
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH,
HO_HHO_WITH_INTRA_FREQ_MR_SWITCH,
HO_MULTIRAB_CSPS_HO_COV_PARA_SWITCH
Default Value:
HO_ALGO_HCS_SPEED_EST_SWITCH:
0,HO_ALGO_LDR_ALLOW_SHO_SWITCH:
1,HO_ALGO_MBMS_FLC_SWITCH:
0,HO_ALGO_OVERLAY_SWITCH:
0,HO_INTER_FREQ_HARD_HO_SWITCH:
0,HO_LTE_SERVICE_PSHO_OUT_SWITCH:
0,HO_INTER_RAT_CS_OUT_SWITCH:
1,HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_
SWITCH:
0,HO_INTER_RAT_PS_3G2G_RELOCATION_SWI
TCH:0,HO_INTER_RAT_PS_OUT_SWITCH:
1,HO_INTER_RAT_RNC_SERVICE_HO_SWITCH:
0,HO_INTRA_FREQ_DETSET_INTO_ACTSET_S
WITCH:
1,HO_INTRA_FREQ_DETSET_RPRT_SWITCH:
1,HO_INTRA_FREQ_HARD_HO_SWITCH:
1,HO_INTRA_FREQ_RPRT_1J_SWITCH:
0,HO_INTRA_FREQ_SOFT_HO_SWITCH:
1,HO_MC_MEAS_BEYOND_UE_CAP_SWITCH:
HO_LTE_SERVICE_PSHO_OUT_SWITCH,
HO_INTER_RAT_CS_OUT_SWITCH,
HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_S
WITCH,
HO_INTER_RAT_PS_3G2G_RELOCATION_SWIT
CH, HO_INTER_RAT_PS_OUT_SWITCH,
HO_INTER_RAT_RNC_SERVICE_HO_SWITCH,
HO_INTRA_FREQ_DETSET_INTO_ACTSET_SWI
TCH,
HO_INTRA_FREQ_DETSET_RPRT_SWITCH,
HO_INTRA_FREQ_HARD_HO_SWITCH,
HO_INTRA_FREQ_RPRT_1J_SWITCH,
HO_INTRA_FREQ_SOFT_HO_SWITCH,
HO_MC_MEAS_BEYOND_UE_CAP_SWITCH,
HO_MC_NCELL_COMBINE_SWITCH,
HO_MC_SIGNAL_IUR_INTRA_SWITCH,
HO_MC_SIGNAL_SWITCH,
HO_MC_SNA_RESTRICTION_SWITCH,
HO_LTE_PS_OUT_SWITCH,
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_H2G_SRVCC_SWITCH,
HO_INTRA_FREQ_HIGHPRIOR_2D2F_SWITCH,
HO_CIO_1D_USED,
HO_HCS_SPD_INI_BSD_UE_SWITCH,
HO_L2U_EMGCALL_SWITCH,
HO_UMTS_TO_LTE_FAST_RETURN_SWITCH,
HO_HHO_WITH_INTRA_FREQ_MR_SWITCH,
HO_MULTIRAB_CSPS_HO_COV_PARA_SWITCH
Default Value:
HO_ALGO_HCS_SPEED_EST_SWITCH:
0,HO_ALGO_LDR_ALLOW_SHO_SWITCH:
1,HO_ALGO_MBMS_FLC_SWITCH:
0,HO_ALGO_OVERLAY_SWITCH:
0,HO_INTER_FREQ_HARD_HO_SWITCH:
0,HO_LTE_SERVICE_PSHO_OUT_SWITCH:
0,HO_INTER_RAT_CS_OUT_SWITCH:
1,HO_INTER_RAT_PS_3G2G_CELLCHG_NACC_
SWITCH:
0,HO_INTER_RAT_PS_3G2G_RELOCATION_SWI
TCH:0,HO_INTER_RAT_PS_OUT_SWITCH:
1,HO_INTER_RAT_RNC_SERVICE_HO_SWITCH:
0,HO_INTRA_FREQ_DETSET_INTO_ACTSET_S
WITCH:
1,HO_INTRA_FREQ_DETSET_RPRT_SWITCH:
1,HO_INTRA_FREQ_HARD_HO_SWITCH:
1,HO_INTRA_FREQ_RPRT_1J_SWITCH:
0,HO_INTRA_FREQ_SOFT_HO_SWITCH:
1,HO_MC_MEAS_BEYOND_UE_CAP_SWITCH:
U2LTE BSC690 ADD WRFD- Service- Meaning: Length of a timer for LTE cell
MeasTi 0 UCELL 140218 Based measurements. The RNC starts the timer to perform
me U2LTE WRFD- PS LTE cell measurements. When the timer expires, the
HOCOV 150220 Handov RNC stops measuring LTE cells. If the parameter is
MOD er from set to 0, the RNC keeps measuring the LTE cells.
WRFD- UMTS
UCELL 150219 GUI Value Range: 0~512
U2LTE to LTE
Unit: s
HOCOV Coverag
e Based Actual Value Range: 0~512
PS Default Value: 30
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
U2LTE BSC691 ADD WRFD- Service- Meaning: Length of a timer for LTE cell
MeasTi 0 UCELL 140218 Based measurements. The RNC starts the timer to perform
me U2LTE WRFD- PS LTE cell measurements. When the timer expires, the
HOCOV 150220 Handov RNC stops measuring LTE cells. If the parameter is
MOD er from set to 0, the RNC keeps measuring the LTE cells.
WRFD- UMTS
UCELL 150219 GUI Value Range: 0~512
U2LTE to LTE
Unit: s
HOCOV Coverag
e Based Actual Value Range: 0~512
PS Default Value: 30
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
LTEPeri BSC690 ADD WRFD- Coverag Meaning: Interval at which a UE periodically reports
odRepor 0 UCELL 150220 e Based LTE cell measurements to the RNC. If
tInterval U2LTE WRFD- PS "LTEPeriodReportInterval" is set to
HOCOV 150219 Handov NON_PERIODIC_REPORT, the UE cannot
MOD er from periodically report LTE cell measurements, which is
UCELL UMTS not recommended. For details, see 3GPP TS 25.331.
U2LTE to LTE GUI Value Range: NON_PERIODIC_REPORT(Non
HOCOV Coverag periodical reporting), D250(D250), D500(D500),
e Based D1000(D1000), D2000(D2000), D3000(D3000),
PS D4000(D4000), D6000(D6000), D8000(D8000),
Redirect D12000(D12000), D16000(D16000),
ion from D20000(D20000), D24000(D24000),
UMTS D28000(D28000), D32000(D32000),
to LTE D64000(D64000)
Unit: ms
Actual Value Range: NON_PERIODIC_REPORT,
250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000,
16000, 20000, 24000, 28000, 32000, 64000
Default Value: D1000(D1000)
LTEPeri BSC691 ADD WRFD- Coverag Meaning: Interval at which a UE periodically reports
odRepor 0 UCELL 150220 e Based LTE cell measurements to the RNC. If
tInterval U2LTE WRFD- PS "LTEPeriodReportInterval" is set to
HOCOV 150219 Handov NON_PERIODIC_REPORT, the UE cannot
MOD er from periodically report LTE cell measurements, which is
UCELL UMTS not recommended. For details, see 3GPP TS 25.331.
U2LTE to LTE GUI Value Range: NON_PERIODIC_REPORT(Non
HOCOV Coverag periodical reporting), D250(D250), D500(D500),
e Based D1000(D1000), D2000(D2000), D3000(D3000),
PS D4000(D4000), D6000(D6000), D8000(D8000),
Redirect D12000(D12000), D16000(D16000),
ion from D20000(D20000), D24000(D24000),
UMTS D28000(D28000), D32000(D32000),
to LTE D64000(D64000)
Unit: ms
Actual Value Range: NON_PERIODIC_REPORT,
250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000,
16000, 20000, 24000, 28000, 32000, 64000
Default Value: D1000(D1000)
6)SPECUSER_NO_RBSETUP_MSG_OPT_SWITC
H(RB SETUP Message Size Reduction Disable
Switch)
Whether to disable the RB SETUP message size
reduction function for special UEs.
1: This switch is turned on and special UEs cannot use
the RB SETUP message size reduction function.
0: This switch is turned off and special UEs can use
the RB SETUP message size reduction function.
7)SPECUSER_REEST_TO_FACH_LIMITATION(R
L Reestablishment on FACH Forbidden for Special
UEs)
Whether to forbid special UEs to reestablish their
radio links (RLs) on the FACH.
1: This switch is turned on, and special UEs cannot
reestablish their RLs on the FACH.
0: This switch is turned off, and special UEs can
reestablish their RLs on the FACH.
8)SPECUSER_WBAMR_RB_RECFG_LIMIT_SWI
TCH(WB-AMR RB RECFG Disable Switch)
Whether to perform the RB RECFG procedure for
special UEs processing AMR-WB or AMR-NB
services.
1: This switch is turned on and the RNC does not
perform the RB RECFG procedure on UEs processing
AMR-WB or AMR-NB services.
0: This switch is turned off and the RNC performs the
RB RECFG procedure on UEs processing AMR-WB
or AMR-NB services.
9)SPECUSER_NO_FAST_RECFG_HHO_SWITCH(
Fast Recfg Prohibit Switch for Special UE in HHO)
Whether to use the asynchronous configuration mode
for a special UE in hard handover scenarios.
1: This switch is turned on and the asynchronous
configuration mode is not used for a specified UE in
hard handover scenarios.
0: This switch is turned off and the asynchronous
configuration mode can be used for a specified UE in
hard handover scenarios.
10)SPECUSER_NO_AMR_NOISE_DETECT_SWIT
CH(UL Garbled Noise Detection and Correction
Inhibition Switch for Special UEs)
SPECUSER_DLRLMAXPWR_RECTIFY_SWITCH,
SPECUSER_SRB_TF_OPT_LIMIT_SWITCH
Unit: None
Actual Value Range:
SPECUSER_4C_HSDPA_LIMIT_SWITCH,
SPECUSER_3C_HSDPA_LIMIT_SWITCH,
SPECUSER_DC_HSDPA_LIMIT_SWITCH,
SPECUSER_DB_HSDPA_LIMIT_SWITCH,
SPECUSER_DC_HSUPA_LIMIT_SWITCH,
SPECUSER_NO_RBSETUP_MSG_OPT_SWITCH,
SPECUSER_REEST_TO_FACH_LIMITATION,
SPECUSER_WBAMR_RB_RECFG_LIMIT_SWITC
H,
SPECUSER_NO_FAST_RECFG_HHO_SWITCH,
SPECUSER_NO_AMR_NOISE_DETECT_SWITCH
,
SPECUSER_NO_HSDPACM_SWITCH,
SPECUSER_NO_HSUPACM_SWITCH,
SPECUSER_NO_EHSPACM_SWITCH,
SPECUSER_GUL_CM_LIMIT_SWITCH,
SPECUSER_SECMOD_CU_OVERLAP_OPT_SWI
TCH,
SPECUSER_SECMOD_CU_OVERLAP_CMP_SWI
TCH,
SPECUSER_DLRLMAXPWR_RECTIFY_SWITCH,
SPECUSER_SRB_TF_OPT_LIMIT_SWITCH
Default Value:
SPECUSER_4C_HSDPA_LIMIT_SWITCH:
0,SPECUSER_3C_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DC_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DB_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DC_HSUPA_LIMIT_SWITCH:
0,SPECUSER_NO_RBSETUP_MSG_OPT_SWITCH
:0,SPECUSER_REEST_TO_FACH_LIMITATION:
0,SPECUSER_WBAMR_RB_RECFG_LIMIT_SWIT
CH:
0,SPECUSER_NO_FAST_RECFG_HHO_SWITCH:
0,SPECUSER_NO_AMR_NOISE_DETECT_SWITC
H:0,SPECUSER_NO_HSDPACM_SWITCH:
0,SPECUSER_NO_HSUPACM_SWITCH:
0,SPECUSER_NO_EHSPACM_SWITCH:
0,SPECUSER_GUL_CM_LIMIT_SWITCH:
0,SPECUSER_SECMOD_CU_OVERLAP_OPT_SW
ITCH:
0,SPECUSER_SECMOD_CU_OVERLAP_CMP_S
WITCH:
0,SPECUSER_DLRLMAXPWR_RECTIFY_SWITC
H:0,SPECUSER_SRB_TF_OPT_LIMIT_SWITCH:0
6)SPECUSER_NO_RBSETUP_MSG_OPT_SWITC
H(RB SETUP Message Size Reduction Disable
Switch)
Whether to disable the RB SETUP message size
reduction function for special UEs.
1: This switch is turned on and special UEs cannot use
the RB SETUP message size reduction function.
0: This switch is turned off and special UEs can use
the RB SETUP message size reduction function.
7)SPECUSER_REEST_TO_FACH_LIMITATION(R
L Reestablishment on FACH Forbidden for Special
UEs)
Whether to forbid special UEs to reestablish their
radio links (RLs) on the FACH.
1: This switch is turned on, and special UEs cannot
reestablish their RLs on the FACH.
0: This switch is turned off, and special UEs can
reestablish their RLs on the FACH.
8)SPECUSER_WBAMR_RB_RECFG_LIMIT_SWI
TCH(WB-AMR RB RECFG Disable Switch)
Whether to perform the RB RECFG procedure for
special UEs processing AMR-WB or AMR-NB
services.
1: This switch is turned on and the RNC does not
perform the RB RECFG procedure on UEs processing
AMR-WB or AMR-NB services.
0: This switch is turned off and the RNC performs the
RB RECFG procedure on UEs processing AMR-WB
or AMR-NB services.
9)SPECUSER_NO_FAST_RECFG_HHO_SWITCH(
Fast Recfg Prohibit Switch for Special UE in HHO)
Whether to use the asynchronous configuration mode
for a special UE in hard handover scenarios.
1: This switch is turned on and the asynchronous
configuration mode is not used for a specified UE in
hard handover scenarios.
0: This switch is turned off and the asynchronous
configuration mode can be used for a specified UE in
hard handover scenarios.
10)SPECUSER_NO_AMR_NOISE_DETECT_SWIT
CH(UL Garbled Noise Detection and Correction
Inhibition Switch for Special UEs)
SPECUSER_DLRLMAXPWR_RECTIFY_SWITCH,
SPECUSER_SRB_TF_OPT_LIMIT_SWITCH
Unit: None
Actual Value Range:
SPECUSER_4C_HSDPA_LIMIT_SWITCH,
SPECUSER_3C_HSDPA_LIMIT_SWITCH,
SPECUSER_DC_HSDPA_LIMIT_SWITCH,
SPECUSER_DB_HSDPA_LIMIT_SWITCH,
SPECUSER_DC_HSUPA_LIMIT_SWITCH,
SPECUSER_NO_RBSETUP_MSG_OPT_SWITCH,
SPECUSER_REEST_TO_FACH_LIMITATION,
SPECUSER_WBAMR_RB_RECFG_LIMIT_SWITC
H,
SPECUSER_NO_FAST_RECFG_HHO_SWITCH,
SPECUSER_NO_AMR_NOISE_DETECT_SWITCH
,
SPECUSER_NO_HSDPACM_SWITCH,
SPECUSER_NO_HSUPACM_SWITCH,
SPECUSER_NO_EHSPACM_SWITCH,
SPECUSER_GUL_CM_LIMIT_SWITCH,
SPECUSER_SECMOD_CU_OVERLAP_OPT_SWI
TCH,
SPECUSER_SECMOD_CU_OVERLAP_CMP_SWI
TCH,
SPECUSER_DLRLMAXPWR_RECTIFY_SWITCH,
SPECUSER_SRB_TF_OPT_LIMIT_SWITCH
Default Value:
SPECUSER_4C_HSDPA_LIMIT_SWITCH:
0,SPECUSER_3C_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DC_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DB_HSDPA_LIMIT_SWITCH:
0,SPECUSER_DC_HSUPA_LIMIT_SWITCH:
0,SPECUSER_NO_RBSETUP_MSG_OPT_SWITCH
:0,SPECUSER_REEST_TO_FACH_LIMITATION:
0,SPECUSER_WBAMR_RB_RECFG_LIMIT_SWIT
CH:
0,SPECUSER_NO_FAST_RECFG_HHO_SWITCH:
0,SPECUSER_NO_AMR_NOISE_DETECT_SWITC
H:0,SPECUSER_NO_HSDPACM_SWITCH:
0,SPECUSER_NO_HSUPACM_SWITCH:
0,SPECUSER_NO_EHSPACM_SWITCH:
0,SPECUSER_GUL_CM_LIMIT_SWITCH:
0,SPECUSER_SECMOD_CU_OVERLAP_OPT_SW
ITCH:
0,SPECUSER_SECMOD_CU_OVERLAP_CMP_S
WITCH:
0,SPECUSER_DLRLMAXPWR_RECTIFY_SWITC
H:0,SPECUSER_SRB_TF_OPT_LIMIT_SWITCH:0
InterPlm BSC690 SET WRFD- Dedicate Meaning: Whether inter-RAT inter-PLMN handovers
nHoAllo 0 UOPER 0213040 d are allowed.
wedInter ATORS 1 Carrier GUI Value Range: NO, YES
Rat HARIN WRFD- for Each
GMOD Operator Unit: None
021311
E MOCN Actual Value Range: NO, YES
WRFD-
0213040 Introduc Default Value: NO
3 tion
Package
WRFD-
0213110 Mobility
3 Control
and
WRFD- Service
021304 Differen
tiation
MOCN
Mobility
Manage
ment
RAN
Sharing
Introduc
tion
Package
InterPlm BSC691 SET WRFD- Dedicate Meaning: Whether inter-RAT inter-PLMN handovers
nHoAllo 0 UOPER 0213040 d are allowed.
wedInter ATORS 1 Carrier GUI Value Range: NO, YES
Rat HARIN WRFD- for Each
GMOD Operator Unit: None
021311
E MOCN Actual Value Range: NO, YES
WRFD-
0213040 Introduc Default Value: NO
3 tion
Package
WRFD-
0213110 Mobility
3 Control
and
WRFD- Service
021304 Differen
tiation
MOCN
Mobility
Manage
ment
RAN
Sharing
Introduc
tion
Package
SupCnO BSC690 ADD WRFD- PS Meaning: Whether the CN operator group index is
pGrpInd 0 UCELL 020129 Service used. If this parameter is set to TRUE, the CN
ex NFREQ Redirect Operator Group Index parameter must be configured,
PRIOIN ion from and the frequency information in a measurement
FO UMTS control message sent to UEs is filtered based on
MOD to LTE operator information. If this parameter is set to
UCELL FALSE, the frequency information in the
NFREQ measurement control message is not filtered.
PRIOIN GUI Value Range: FALSE, TRUE
FO Unit: None
Actual Value Range: FALSE, TRUE
Default Value: False
SupCnO BSC691 ADD WRFD- PS Meaning: Whether the CN operator group index is
pGrpInd 0 UCELL 020129 Service used. If this parameter is set to TRUE, the CN
ex NFREQ Redirect Operator Group Index parameter must be configured,
PRIOIN ion from and the frequency information in a measurement
FO UMTS control message sent to UEs is filtered based on
MOD to LTE operator information. If this parameter is set to
UCELL FALSE, the frequency information in the
NFREQ measurement control message is not filtered.
PRIOIN GUI Value Range: FALSE, TRUE
FO Unit: None
Actual Value Range: FALSE, TRUE
Default Value: False
CnOpGr BSC690 ADD WRFD- PS Meaning: Index of the operator group that serves an
pIndex 0 ULTEC 020129 Service LTE cell.
ELL WRFD- Redirect GUI Value Range: 0~31
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 0~31
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
CnOpGr BSC691 ADD WRFD- PS Meaning: Index of the operator group that serves an
pIndex 0 ULTEC 020129 Service LTE cell.
ELL WRFD- Redirect GUI Value Range: 0~31
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 0~31
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
RatFreq BSC690 ADD WRFD- Camp & Meaning: ID of a RAT/frequency priority group.
Priority 0 URATF 160270 Handov GUI Value Range: 0~255
GroupId REQPRI er Based
OGROU on SPI Unit: None
P Actual Value Range: 0~255
MOD Default Value: None
URATF
REQPRI
OGROU
P
RMV
URATF
REQPRI
OGROU
P
RatFreq BSC691 ADD WRFD- Camp & Meaning: ID of a RAT/frequency priority group.
Priority 0 URATF 160270 Handov GUI Value Range: 0~255
GroupId REQPRI er Based
OGROU on SPI Unit: None
P Actual Value Range: 0~255
MOD Default Value: None
URATF
REQPRI
OGROU
P
RMV
URATF
REQPRI
OGROU
P
SPIDBa BSC690 ADD WRFD- Camp & Meaning: Whether the UE can be handed over or
sedHand 0 USPIDC 160270 Handov redirected from a UMTS cell to an LTE cell.
overInd FG er Based GUI Value Range: NO, YES
MOD on SPI
Unit: None
USPIDC
FG Actual Value Range: NO, YES
Default Value: YES
SPIDBa BSC691 ADD WRFD- Camp & Meaning: Whether the UE can be handed over or
sedHand 0 USPIDC 160270 Handov redirected from a UMTS cell to an LTE cell.
overInd FG er Based GUI Value Range: NO, YES
MOD on SPI
Unit: None
USPIDC
FG Actual Value Range: NO, YES
Default Value: YES
SPIDBa BSC690 ADD WRFD- Camp & Meaning: Policy of using the LTE frequency in the
sedU2L 0 USPIDC 160270 Handov RAT/Frequency Priority Group ID to filter the target
PSHoM FG er Based frequencies when UEs perform SPID-based UMTS-
ode MOD on SPI to-LTE PS handovers or redirections. When this
USPIDC parameter is set to NOT_FILTERED, the target
FG frequency is not filtered using the LTE frequency in
the RAT/Frequency Priority Group ID. When this
parameter is set to
NON_DEDI_PRIO_LTE_FREQ_FILTERED, the
LTE frequencies not configured in the RAT/Frequency
Priority Group ID are filtered. When this parameter is
set to LOW_PRIO_LTE_FREQ_FILTERED, the LTE
frequencies not configured in the RAT/Frequency
Priority Group ID are filtered, and the LTE
frequencies that are in the RAT/Frequency Priority
Group ID and with a lower priority than UMTS cells
are filtered.
GUI Value Range: NOT_FILTERED,
NON_DEDI_PRIO_LTE_FREQ_FILTERED,
LOW_PRIO_LTE_FREQ_FILTERED
Unit: None
Actual Value Range: NOT_FILTERED,
NON_DEDI_PRIO_LTE_FREQ_FILTERED,
LOW_PRIO_LTE_FREQ_FILTERED
Default Value: NOT_FILTERED
SPIDBa BSC691 ADD WRFD- Camp & Meaning: Policy of using the LTE frequency in the
sedU2L 0 USPIDC 160270 Handov RAT/Frequency Priority Group ID to filter the target
PSHoM FG er Based frequencies when UEs perform SPID-based UMTS-
ode MOD on SPI to-LTE PS handovers or redirections. When this
USPIDC parameter is set to NOT_FILTERED, the target
FG frequency is not filtered using the LTE frequency in
the RAT/Frequency Priority Group ID. When this
parameter is set to
NON_DEDI_PRIO_LTE_FREQ_FILTERED, the
LTE frequencies not configured in the RAT/Frequency
Priority Group ID are filtered. When this parameter is
set to LOW_PRIO_LTE_FREQ_FILTERED, the LTE
frequencies not configured in the RAT/Frequency
Priority Group ID are filtered, and the LTE
frequencies that are in the RAT/Frequency Priority
Group ID and with a lower priority than UMTS cells
are filtered.
GUI Value Range: NOT_FILTERED,
NON_DEDI_PRIO_LTE_FREQ_FILTERED,
LOW_PRIO_LTE_FREQ_FILTERED
Unit: None
Actual Value Range: NOT_FILTERED,
NON_DEDI_PRIO_LTE_FREQ_FILTERED,
LOW_PRIO_LTE_FREQ_FILTERED
Default Value: NOT_FILTERED
RatFreq BSC690 ADD WRFD- Camp & Meaning: A set of RATs and their corresponding
Priority 0 USPIDC 160270 Handov frequency priorities.
GroupId FG er Based GUI Value Range: 0~255
MOD on SPI
Unit: None
USPIDC
FG Actual Value Range: 0~255
Default Value: None
RatFreq BSC691 ADD WRFD- Camp & Meaning: A set of RATs and their corresponding
Priority 0 USPIDC 160270 Handov frequency priorities.
GroupId FG er Based GUI Value Range: 0~255
MOD on SPI
Unit: None
USPIDC
FG Actual Value Range: 0~255
Default Value: None
DediPri BSC690 ADD WRFD- Camp & Meaning: Priority of a RAT or frequency.For details
ority 0 URATF 160270 Handov about this parameter, see 3GPP TS 25.331.
REQPRI er Based GUI Value Range: 0~7
OGROU on SPI
P Unit: None
DediPri BSC691 ADD WRFD- Camp & Meaning: Priority of a RAT or frequency.For details
ority 0 URATF 160270 Handov about this parameter, see 3GPP TS 25.331.
REQPRI er Based GUI Value Range: 0~7
OGROU on SPI
P Unit: None
ImsiGrp BSC690 ADD WRFD- IMSI- Meaning: Index of an IMSI number segment.
Index 0 UIMSI 171224 based GUI Value Range: 0~1023
MM Mobility
Manage Unit: None
MOD
UIMSI ment for Actual Value Range: 0~1023
MM Multiple Default Value: None
Operator
RMV s
UIMSI
MM
ImsiGrp BSC691 ADD WRFD- IMSI- Meaning: Index of an IMSI number segment.
Index 0 UIMSI 171224 based GUI Value Range: 0~1023
MM Mobility
Manage Unit: None
MOD
UIMSI ment for Actual Value Range: 0~1023
MM Multiple Default Value: None
Operator
RMV s
UIMSI
MM
RatFreq BSC690 ADD WRFD- IMSI- Meaning: A set of RATs and their corresponding
Priority 0 UIMSI 171224 based frequency priorities.
GroupId MM Mobility GUI Value Range: 0~255
MOD Manage
ment for Unit: None
UIMSI
MM Multiple Actual Value Range: 0~255
Operator Default Value: None
s
RatFreq BSC691 ADD WRFD- IMSI- Meaning: A set of RATs and their corresponding
Priority 0 UIMSI 171224 based frequency priorities.
GroupId MM Mobility GUI Value Range: 0~255
MOD Manage
ment for Unit: None
UIMSI
MM Multiple Actual Value Range: 0~255
Operator Default Value: None
s
UsedFre BSC690 ADD WRFD- Coverag Meaning: RSCP threshold of the used frequency.
qThdRS 0 UCELL 150220 e Based Event 3A is triggered when the quality of the used
CP U2LTE WRFD- PS frequency is lower than the threshold and the quality
HOCOV 150219 Handov of the target cell is higher than the corresponding
MOD er from decision threshold as indicated by
UCELL UMTS "TargetRatThdRSRP" or "TargetRatThdRSRQ".For
U2LTE to LTE details, see 3GPP TS 25.331.
HOCOV Coverag GUI Value Range: -115~-25
e Based Unit: dBm
PS
Redirect Actual Value Range: -115~-25
ion from Default Value: -107
UMTS
to LTE
UsedFre BSC691 ADD WRFD- Coverag Meaning: RSCP threshold of the used frequency.
qThdRS 0 UCELL 150220 e Based Event 3A is triggered when the quality of the used
CP U2LTE WRFD- PS frequency is lower than the threshold and the quality
HOCOV 150219 Handov of the target cell is higher than the corresponding
MOD er from decision threshold as indicated by
UCELL UMTS "TargetRatThdRSRP" or "TargetRatThdRSRQ".For
U2LTE to LTE details, see 3GPP TS 25.331.
HOCOV Coverag GUI Value Range: -115~-25
e Based Unit: dBm
PS
Redirect Actual Value Range: -115~-25
ion from Default Value: -107
UMTS
to LTE
UsedFre BSC690 ADD WRFD- Coverag Meaning: Ec/No threshold of the used frequency.
qThdEc 0 UCELL 150220 e Based Event 3A is triggered when the quality of the used
No U2LTE WRFD- PS frequency is lower than the threshold and the quality
HOCOV 150219 Handov of the target cell is higher than the corresponding
MOD er from decision threshold as indicated by
UCELL UMTS "TargetRatThdRSRP" or "TargetRatThdRSRQ".For
U2LTE to LTE details, see 3GPP TS 25.331.
HOCOV Coverag GUI Value Range: -24~0
e Based Unit: dB
PS
Redirect Actual Value Range: -24~0
ion from Default Value: -13
UMTS
to LTE
UsedFre BSC691 ADD WRFD- Coverag Meaning: Ec/No threshold of the used frequency.
qThdEc 0 UCELL 150220 e Based Event 3A is triggered when the quality of the used
No U2LTE WRFD- PS frequency is lower than the threshold and the quality
HOCOV 150219 Handov of the target cell is higher than the corresponding
MOD er from decision threshold as indicated by
UCELL UMTS "TargetRatThdRSRP" or "TargetRatThdRSRQ".For
U2LTE to LTE details, see 3GPP TS 25.331.
HOCOV Coverag GUI Value Range: -24~0
e Based Unit: dB
PS
Redirect Actual Value Range: -24~0
ion from Default Value: -13
UMTS
to LTE
TargetR BSC690 ADD WRFD- Coverag Meaning: Reference signal received power (RSRP)
atThdRS 0 UCELL 150220 e Based threshold for LTE cell measurements. If
RP U2LTE WRFD- PS "LTEReportMode" is set to EVENT_TRIGGER,
HOCOV 150219 Handov event 3A is triggered when the UE detects the quality
MOD er from of the target cell is higher than the threshold and the
UCELL UMTS quality of the used frequency is lower than the
U2LTE to LTE corresponding threshold. If "LTEReportMode" is set
HOCOV Coverag to PERIODICAL_REPORTING, a handover is
e Based triggered when the RNC detects that the quality of the
PS target cell is higher than the threshold. For details
Redirect about this parameter, see section 10.3.7.30 "Inter-RAT
ion from measurement reporting criteria" in 3GPP TS 25.331.
UMTS The RNC carries the Threshold other system IE in the
to LTE measurement control message sent to the UE. This IE
is used to calculate the actual value of the inter-RAT
measurement threshold. Actual value = Threshold
other system - 25 [dBm], Threshold other system =
GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC691 ADD WRFD- Coverag Meaning: Reference signal received power (RSRP)
atThdRS 0 UCELL 150220 e Based threshold for LTE cell measurements. If
RP U2LTE WRFD- PS "LTEReportMode" is set to EVENT_TRIGGER,
HOCOV 150219 Handov event 3A is triggered when the UE detects the quality
MOD er from of the target cell is higher than the threshold and the
UCELL UMTS quality of the used frequency is lower than the
U2LTE to LTE corresponding threshold. If "LTEReportMode" is set
HOCOV Coverag to PERIODICAL_REPORTING, a handover is
e Based triggered when the RNC detects that the quality of the
PS target cell is higher than the threshold. For details
Redirect about this parameter, see section 10.3.7.30 "Inter-RAT
ion from measurement reporting criteria" in 3GPP TS 25.331.
UMTS The RNC carries the Threshold other system IE in the
to LTE measurement control message sent to the UE. This IE
is used to calculate the actual value of the inter-RAT
measurement threshold. Actual value = Threshold
other system - 25 [dBm], Threshold other system =
GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC690 ADD WRFD- Coverag Meaning: RSRQ threshold for LTE cell
atThdRS 0 UCELL 150220 e Based measurements. If "LTEReportMode" is set to
RQ U2LTE WRFD- PS EVENT_TRIGGER, event 3A is triggered when the
HOCOV 150219 Handov UE detects the quality of the target cell is higher than
MOD er from the threshold and the quality of the used frequency is
UCELL UMTS lower than the corresponding threshold. If
U2LTE to LTE "LTEReportMode" is set to
HOCOV Coverag PERIODICAL_REPORTING, a handover is triggered
e Based when the RNC detects that the quality of the target
PS cell is higher than the threshold. For details about this
Redirect parameter, see section 10.3.7.30 "Inter-RAT
ion from measurement reporting criteria" in 3GPP TS 25.331.
UMTS The RNC carries the Threshold other system IE in the
to LTE measurement control message sent to the UE. This IE
is used to calculate the actual value of the inter-RAT
measurement threshold. Actual value = Threshold
other system/2 [dB], Threshold other system = GUI
value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
TargetR BSC691 ADD WRFD- Coverag Meaning: RSRQ threshold for LTE cell
atThdRS 0 UCELL 150220 e Based measurements. If "LTEReportMode" is set to
RQ U2LTE WRFD- PS EVENT_TRIGGER, event 3A is triggered when the
HOCOV 150219 Handov UE detects the quality of the target cell is higher than
MOD er from the threshold and the quality of the used frequency is
UCELL UMTS lower than the corresponding threshold. If
U2LTE to LTE "LTEReportMode" is set to
HOCOV Coverag PERIODICAL_REPORTING, a handover is triggered
e Based when the RNC detects that the quality of the target
PS cell is higher than the threshold. For details about this
Redirect parameter, see section 10.3.7.30 "Inter-RAT
ion from measurement reporting criteria" in 3GPP TS 25.331.
UMTS The RNC carries the Threshold other system IE in the
to LTE measurement control message sent to the UE. This IE
is used to calculate the actual value of the inter-RAT
measurement threshold. Actual value = Threshold
other system/2 [dB], Threshold other system = GUI
value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
TrigTim BSC690 ADD WRFD- Coverag Meaning: Time-to-trigger for reporting event 3A. The
e3A 0 UCELL 150220 e Based value of this parameter is related to slow fading. For
U2LTE WRFD- PS details, see 3GPP TS 25.331.
HOCOV 150219 Handov GUI Value Range: D0, D10, D20, D40, D60, D80,
MOD er from D100, D120, D160, D200, D240, D320, D640,
UCELL UMTS D1280, D2560, D5000
U2LTE to LTE
Unit: ms
HOCOV Coverag
e Based Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
PS 160, 200, 240, 320, 640, 1280, 2560, 5000
Redirect Default Value: D0
ion from
UMTS
to LTE
TrigTim BSC691 ADD WRFD- Coverag Meaning: Time-to-trigger for reporting event 3A. The
e3A 0 UCELL 150220 e Based value of this parameter is related to slow fading. For
U2LTE WRFD- PS details, see 3GPP TS 25.331.
HOCOV 150219 Handov GUI Value Range: D0, D10, D20, D40, D60, D80,
MOD er from D100, D120, D160, D200, D240, D320, D640,
UCELL UMTS D1280, D2560, D5000
U2LTE to LTE
Unit: ms
HOCOV Coverag
e Based Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
PS 160, 200, 240, 320, 640, 1280, 2560, 5000
Redirect Default Value: D0
ion from
UMTS
to LTE
U2LTE BSC690 SET WRFD- PS Meaning: Length of a timer for LTE cell
MeasTi 0 UU2LT 020129 Service measurements. The RNC starts the timer to perform
me EHONC Redirect LTE cell measurements. When the timer expires, the
OV ion from RNC stops measuring LTE cells. If the parameter is
UMTS set to 0, the RNC keeps measuring the LTE cells.
to LTE GUI Value Range: 0~512
Unit: s
Actual Value Range: 0~512
Default Value: 5
U2LTE BSC691 SET WRFD- PS Meaning: Length of a timer for LTE cell
MeasTi 0 UU2LT 020129 Service measurements. The RNC starts the timer to perform
me EHONC Redirect LTE cell measurements. When the timer expires, the
OV ion from RNC stops measuring LTE cells. If the parameter is
UMTS set to 0, the RNC keeps measuring the LTE cells.
to LTE GUI Value Range: 0~512
Unit: s
Actual Value Range: 0~512
Default Value: 5
Penalty BSC690 SET WRFD- Inter- Meaning: Penalty timer on compressed mode after
TimerFo 0 UHOCO 020309 RAT coverage-based measurement expires. After coverage-
rCMFail MM WRFD- Handov based inter-frequency measurement (inter-RAT or
Cov 020302 er Based UMTS-to-LTE) expires, this timer is started and a UE
on DL cannot start the compressed mode for inter-frequency
WRFD- QoS measurement (inter-RAT or UMTS-to-LTE) during the
020303 period specified by this timer.
Inter
WRFD- Frequen GUI Value Range: 0~65535
020304 cy Hard Unit: s
Handov
er Based Actual Value Range: 0~65535
on Default Value: 10
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
Penalty BSC691 SET WRFD- Inter- Meaning: Penalty timer on compressed mode after
TimerFo 0 UHOCO 020309 RAT coverage-based measurement expires. After coverage-
rCMFail MM WRFD- Handov based inter-frequency measurement (inter-RAT or
Cov 020302 er Based UMTS-to-LTE) expires, this timer is started and a UE
on DL cannot start the compressed mode for inter-frequency
WRFD- QoS measurement (inter-RAT or UMTS-to-LTE) during the
020303 period specified by this timer.
Inter
WRFD- Frequen GUI Value Range: 0~65535
020304 cy Hard Unit: s
Handov
er Based Actual Value Range: 0~65535
on Default Value: 10
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
Penalty BSC690 ADD WRFD- Inter- Meaning: Penalty timer on compressed mode after
TimerFo 0 UCELL 020309 RAT coverage-based measurement expires. After coverage-
rCMFail HOCO WRFD- Handov based inter-frequency measurement (inter-RAT or
Cov MM 020302 er Based UMTS-to-LTE) expires, this timer is started and a UE
MOD on DL cannot start the compressed mode for inter-frequency
WRFD- QoS measurement (inter-RAT or UMTS-to-LTE) during the
UCELL 020303
HOCO Inter period specified by this timer.
MM WRFD- Frequen GUI Value Range: 0~65535
020304 cy Hard Unit: s
Handov
er Based Actual Value Range: 0~65535
on Default Value: 10
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
Penalty BSC691 ADD WRFD- Inter- Meaning: Penalty timer on compressed mode after
TimerFo 0 UCELL 020309 RAT coverage-based measurement expires. After coverage-
rCMFail HOCO WRFD- Handov based inter-frequency measurement (inter-RAT or
Cov MM 020302 er Based UMTS-to-LTE) expires, this timer is started and a UE
MOD on DL cannot start the compressed mode for inter-frequency
WRFD- QoS measurement (inter-RAT or UMTS-to-LTE) during the
UCELL 020303
HOCO Inter period specified by this timer.
MM WRFD- Frequen GUI Value Range: 0~65535
020304 cy Hard Unit: s
Handov
er Based Actual Value Range: 0~65535
on Default Value: 10
Coverag
e
Inter-
RAT
Handov
er Based
on
Coverag
e
Inter
Frequen
cy Hard
Handov
er Based
on DL
QoS
BlindFla BSC690 ADD WRFD- Load Meaning: ID of the neighboring LTE cell for blind
g 0 ULTEN 150216 Based handovers. If this parameter is set to TRUE, the
CELL WRFD- PS neighboring LTE cell serves as the cell for UMTS-to-
MOD 020129 Redirect LTE blind redirections. If this parameter is set to
ULTEN ion from FALSE, the neighboring LTE cell does not serve as
WRFD- UMTS the cell for UMTS-to-LTE blind redirections.
CELL 150219 to LTE GUI Value Range: FALSE, TRUE
PS Unit: None
Service
Redirect Actual Value Range: FALSE, TRUE
ion from Default Value: False
UMTS
to LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
BlindFla BSC691 ADD WRFD- Load Meaning: ID of the neighboring LTE cell for blind
g 0 ULTEN 150216 Based handovers. If this parameter is set to TRUE, the
CELL WRFD- PS neighboring LTE cell serves as the cell for UMTS-to-
MOD 020129 Redirect LTE blind redirections. If this parameter is set to
ULTEN ion from FALSE, the neighboring LTE cell does not serve as
WRFD- UMTS the cell for UMTS-to-LTE blind redirections.
CELL 150219 to LTE GUI Value Range: FALSE, TRUE
PS Unit: None
Service
Redirect Actual Value Range: FALSE, TRUE
ion from Default Value: False
UMTS
to LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
g this switch is turned on, the RNC filters out the list for
Connect measured neighboring LTE cells according to the
ion Re- RNC-level parameters, cell capability, and UE
establish capabilities in handovers and redirections to the LTE
ment network. When this switch is turned off, the RNC
(DSCR) does not filter out the list for measured neighboring
Inter- LTE cells.
RAT 8. PERFENH_GSM_NCELL_SEL_OPT_SWITCH:
Handov Scope for matching the neighboring cells in
er Based measurement reports during handovers to GSM cells
on Load when there are multiple cells in the active set and the
HO_MC_NCELL_COMBINE_SWITCH switch is
turned on. In case of neighboring combination, when
this switch is turned on, the RNC matches the
neighboring cells in measurement reports with
neighboring cells of all cells in the current active set.
When this switch is turned off, the RNC matches the
neighboring cells in measurement reports only with
the best cell's neighboring cells.
9.
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH: Whether to select the best target frequency
during a frequency-based redirection from UMTS to
LTE. When this switch is turned on, the selected target
frequency is used as the best frequency if the
measurement report contains multiple neighboring
cells that work at the same frequency.
10.
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
: Switch for the enhanced algorithm of accelerating
the rate for responding to control messages. This
parameter is a professional parameter and therefore
you must configure this parameter under the
instruction of Huawei technical support.For
RTT(round-trip time) tests, the recommended value is
ON. In other scenarios, the recommended value is
OFF.
11. PERFENH_MULTI_PS_DCCC_SWITCH:
Whether to allocate the RLC parameters
corresponding to the 2 ms TTI to the services that are
not reconfigured during the reconfiguration procedure
and have a data rate higher than 2048 kbit/s. The 2048
kbit/s is the maximum data rate supported by the 10
ms TTI. When this switch is turned on, the RNC
allocates such services the RLC parameters
corresponding to the 2 ms TTI. When this switch is
turned off. The RNC does not include the new SPI
weight adjustment factor in the Radio Link
Reconfiguration Prepare message.
GUI Value Range:
PERFENH_RCS_PS_DL_ON_DCH_SWITCH,
PERFENH_HSUPA_CAP_CHG_HRETRY_LMT_S
WITCH,
PERFENH_MC_OPT_AFTER_RETRANS_CHG_S
WITCH,
PERFENH_CSOVERH_H2D_RBID_CHG_SWITCH
,
PERFENH_RRC_DRD_FAILED_RED_GSM_SWIT
CH,
PERFENH_IRAT_COV_HO_NCELL_PRE_SWITC
H, PERFENH_LTE_NCELL_SEL_OPT_SWITCH,
PERFENH_GSM_NCELL_SEL_OPT_SWITCH,
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH,
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
, PERFENH_MULTI_PS_DCCC_SWITCH,
PERFENH_CHL_CHG_FAIL_MC_OLPC_OPT_SW
ITCH,
PERFENH_SET2MBR_ALLOW_D2F_SWITCH,
PERFENH_RAB_REL_WITH_PS_D2F_OPT_SWIT
CH,
PERFENH_DRNC_CU_WITHOUT_EXTCELL_SW
ITCH,
PERFENH_HO_NODEB_UP_RES_LIMIT_E2D_S
WITCH,
PERFENH_LTE_NCELL_FILTE_OPT_SWITCH,
PERFENH_U2L_PUNISH_BASED_ABS_FREQ_S
WITCH,
PERFENH_HE_BIT_OPT_AFTER_RELOC_IN_SW
ITCH,
PERFENH_HHO_RELOC_OUT_WITH_MR_SWIT
CH,
PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITC
H,
PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SW
ITCH,
PERFENH_PERMIT_U2L_ONLY_UE_FROM_L_S
WITCH,
PERFENH_DTXDRX_ENABLEDELAY_CFGOPT_
SWITCH,
PERFENH_MCDRD_FAIL_PENALTY_OPT_SWIT
CH,
PERFENH_HSDPA_SPI_WEIGHT_UPDATE_SWIT
CH
Unit: None
Actual Value Range:
PERFENH_RCS_PS_DL_ON_DCH_SWITCH,
PERFENH_HSUPA_CAP_CHG_HRETRY_LMT_S
WITCH,
PERFENH_MC_OPT_AFTER_RETRANS_CHG_S
WITCH,
PERFENH_CSOVERH_H2D_RBID_CHG_SWITCH
,
PERFENH_RRC_DRD_FAILED_RED_GSM_SWIT
CH,
PERFENH_IRAT_COV_HO_NCELL_PRE_SWITC
H, PERFENH_LTE_NCELL_SEL_OPT_SWITCH,
PERFENH_GSM_NCELL_SEL_OPT_SWITCH,
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH,
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
, PERFENH_MULTI_PS_DCCC_SWITCH,
PERFENH_CHL_CHG_FAIL_MC_OLPC_OPT_SW
ITCH,
PERFENH_SET2MBR_ALLOW_D2F_SWITCH,
PERFENH_RAB_REL_WITH_PS_D2F_OPT_SWIT
CH,
PERFENH_DRNC_CU_WITHOUT_EXTCELL_SW
ITCH,
PERFENH_HO_NODEB_UP_RES_LIMIT_E2D_S
WITCH,
PERFENH_LTE_NCELL_FILTE_OPT_SWITCH,
PERFENH_U2L_PUNISH_BASED_ABS_FREQ_S
WITCH,
PERFENH_HE_BIT_OPT_AFTER_RELOC_IN_SW
ITCH,
PERFENH_HHO_RELOC_OUT_WITH_MR_SWIT
CH,
PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITC
H,
PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SW
ITCH,
PERFENH_PERMIT_U2L_ONLY_UE_FROM_L_S
WITCH,
PERFENH_DTXDRX_ENABLEDELAY_CFGOPT_
SWITCH,
PERFENH_MCDRD_FAIL_PENALTY_OPT_SWIT
CH,
PERFENH_HSDPA_SPI_WEIGHT_UPDATE_SWIT
CH
g this switch is turned on, the RNC filters out the list for
Connect measured neighboring LTE cells according to the
ion Re- RNC-level parameters, cell capability, and UE
establish capabilities in handovers and redirections to the LTE
ment network. When this switch is turned off, the RNC
(DSCR) does not filter out the list for measured neighboring
Inter- LTE cells.
RAT 8. PERFENH_GSM_NCELL_SEL_OPT_SWITCH:
Handov Scope for matching the neighboring cells in
er Based measurement reports during handovers to GSM cells
on Load when there are multiple cells in the active set and the
HO_MC_NCELL_COMBINE_SWITCH switch is
turned on. In case of neighboring combination, when
this switch is turned on, the RNC matches the
neighboring cells in measurement reports with
neighboring cells of all cells in the current active set.
When this switch is turned off, the RNC matches the
neighboring cells in measurement reports only with
the best cell's neighboring cells.
9.
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH: Whether to select the best target frequency
during a frequency-based redirection from UMTS to
LTE. When this switch is turned on, the selected target
frequency is used as the best frequency if the
measurement report contains multiple neighboring
cells that work at the same frequency.
10.
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
: Switch for the enhanced algorithm of accelerating
the rate for responding to control messages. This
parameter is a professional parameter and therefore
you must configure this parameter under the
instruction of Huawei technical support.For
RTT(round-trip time) tests, the recommended value is
ON. In other scenarios, the recommended value is
OFF.
11. PERFENH_MULTI_PS_DCCC_SWITCH:
Whether to allocate the RLC parameters
corresponding to the 2 ms TTI to the services that are
not reconfigured during the reconfiguration procedure
and have a data rate higher than 2048 kbit/s. The 2048
kbit/s is the maximum data rate supported by the 10
ms TTI. When this switch is turned on, the RNC
allocates such services the RLC parameters
corresponding to the 2 ms TTI. When this switch is
turned off. The RNC does not include the new SPI
weight adjustment factor in the Radio Link
Reconfiguration Prepare message.
GUI Value Range:
PERFENH_RCS_PS_DL_ON_DCH_SWITCH,
PERFENH_HSUPA_CAP_CHG_HRETRY_LMT_S
WITCH,
PERFENH_MC_OPT_AFTER_RETRANS_CHG_S
WITCH,
PERFENH_CSOVERH_H2D_RBID_CHG_SWITCH
,
PERFENH_RRC_DRD_FAILED_RED_GSM_SWIT
CH,
PERFENH_IRAT_COV_HO_NCELL_PRE_SWITC
H, PERFENH_LTE_NCELL_SEL_OPT_SWITCH,
PERFENH_GSM_NCELL_SEL_OPT_SWITCH,
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH,
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
, PERFENH_MULTI_PS_DCCC_SWITCH,
PERFENH_CHL_CHG_FAIL_MC_OLPC_OPT_SW
ITCH,
PERFENH_SET2MBR_ALLOW_D2F_SWITCH,
PERFENH_RAB_REL_WITH_PS_D2F_OPT_SWIT
CH,
PERFENH_DRNC_CU_WITHOUT_EXTCELL_SW
ITCH,
PERFENH_HO_NODEB_UP_RES_LIMIT_E2D_S
WITCH,
PERFENH_LTE_NCELL_FILTE_OPT_SWITCH,
PERFENH_U2L_PUNISH_BASED_ABS_FREQ_S
WITCH,
PERFENH_HE_BIT_OPT_AFTER_RELOC_IN_SW
ITCH,
PERFENH_HHO_RELOC_OUT_WITH_MR_SWIT
CH,
PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITC
H,
PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SW
ITCH,
PERFENH_PERMIT_U2L_ONLY_UE_FROM_L_S
WITCH,
PERFENH_DTXDRX_ENABLEDELAY_CFGOPT_
SWITCH,
PERFENH_MCDRD_FAIL_PENALTY_OPT_SWIT
CH,
PERFENH_HSDPA_SPI_WEIGHT_UPDATE_SWIT
CH
Unit: None
Actual Value Range:
PERFENH_RCS_PS_DL_ON_DCH_SWITCH,
PERFENH_HSUPA_CAP_CHG_HRETRY_LMT_S
WITCH,
PERFENH_MC_OPT_AFTER_RETRANS_CHG_S
WITCH,
PERFENH_CSOVERH_H2D_RBID_CHG_SWITCH
,
PERFENH_RRC_DRD_FAILED_RED_GSM_SWIT
CH,
PERFENH_IRAT_COV_HO_NCELL_PRE_SWITC
H, PERFENH_LTE_NCELL_SEL_OPT_SWITCH,
PERFENH_GSM_NCELL_SEL_OPT_SWITCH,
PERFENH_U2L_REDIR_BASED_FREQ_OPT_SWI
TCH,
PERFENH_ICMP_ACCELERATOR_OPT_SWITCH
, PERFENH_MULTI_PS_DCCC_SWITCH,
PERFENH_CHL_CHG_FAIL_MC_OLPC_OPT_SW
ITCH,
PERFENH_SET2MBR_ALLOW_D2F_SWITCH,
PERFENH_RAB_REL_WITH_PS_D2F_OPT_SWIT
CH,
PERFENH_DRNC_CU_WITHOUT_EXTCELL_SW
ITCH,
PERFENH_HO_NODEB_UP_RES_LIMIT_E2D_S
WITCH,
PERFENH_LTE_NCELL_FILTE_OPT_SWITCH,
PERFENH_U2L_PUNISH_BASED_ABS_FREQ_S
WITCH,
PERFENH_HE_BIT_OPT_AFTER_RELOC_IN_SW
ITCH,
PERFENH_HHO_RELOC_OUT_WITH_MR_SWIT
CH,
PERFENH_CS_P2D_TRIG_SERVICE_U2L_SWITC
H,
PERFENH_RB_RECFG_TRIG_SERVICE_U2L_SW
ITCH,
PERFENH_PERMIT_U2L_ONLY_UE_FROM_L_S
WITCH,
PERFENH_DTXDRX_ENABLEDELAY_CFGOPT_
SWITCH,
PERFENH_MCDRD_FAIL_PENALTY_OPT_SWIT
CH,
PERFENH_HSDPA_SPI_WEIGHT_UPDATE_SWIT
CH
HOPrio BSC690 ADD WRFD- Inter- Meaning: Priority of the neighboring cell as a target
0 U2GNC 020303 RAT cell for a handover. Value 0 indicates the highest
ELL Handov priority and value 7 indicates the lowest priority.
MOD er Based When this parameter takes effect, the RNC
U2GNC on preferentially selects the cell with the highest priority
ELL Coverag as the target cell. If two or more cells have the same
e priority, the RNC selects a target cell with the best
signal quality.
GUI Value Range: 0~7
Unit: None
Actual Value Range: 0~7
Default Value: 0
HOPrio BSC691 ADD WRFD- Inter- Meaning: Priority of the neighboring cell as a target
0 U2GNC 020303 RAT cell for a handover. Value 0 indicates the highest
ELL Handov priority and value 7 indicates the lowest priority.
MOD er Based When this parameter takes effect, the RNC
U2GNC on preferentially selects the cell with the highest priority
ELL Coverag as the target cell. If two or more cells have the same
e priority, the RNC selects a target cell with the best
signal quality.
GUI Value Range: 0~7
Unit: None
Actual Value Range: 0~7
Default Value: 0
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_LTE_SERVICE_BLIND_FIRST_SWITCH
Unit: None
Actual Value Range:
HO_LTE_SERVICE_PSHO_OUT_SWITCH,
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_LTE_SERVICE_BLIND_FIRST_SWITCH
Default Value:
HO_LTE_SERVICE_PSHO_OUT_SWITCH:
0,HO_LTE_SERVICE_PS_OUT_SWITCH:
0,HO_LTE_SERVICE_NEED_RSCP_SWITCH:
0,HO_LTE_SERVICE_BLIND_FIRST_SWITCH:0
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_LTE_SERVICE_BLIND_FIRST_SWITCH
Unit: None
Actual Value Range:
HO_LTE_SERVICE_PSHO_OUT_SWITCH,
HO_LTE_SERVICE_PS_OUT_SWITCH,
HO_LTE_SERVICE_NEED_RSCP_SWITCH,
HO_LTE_SERVICE_BLIND_FIRST_SWITCH
Default Value:
HO_LTE_SERVICE_PSHO_OUT_SWITCH:
0,HO_LTE_SERVICE_PS_OUT_SWITCH:
0,HO_LTE_SERVICE_NEED_RSCP_SWITCH:
0,HO_LTE_SERVICE_BLIND_FIRST_SWITCH:0
RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,
RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Default Value: RESERVED_SWITCH_21_BIT1:0,
RESERVED_SWITCH_21_BIT2:0,
RESERVED_SWITCH_21_BIT3:0,
RESERVED_SWITCH_21_BIT4:0,
RESERVED_SWITCH_21_BIT5:0,
RESERVED_SWITCH_21_BIT6:0,
RESERVED_SWITCH_21_BIT7:0,
RESERVED_SWITCH_21_BIT8:0,
RESERVED_SWITCH_21_BIT9:0,
RESERVED_SWITCH_21_BIT10:0,
RESERVED_SWITCH_21_BIT11:0,
RESERVED_SWITCH_21_BIT12:0,
RESERVED_SWITCH_21_BIT13:0,
RESERVED_SWITCH_21_BIT14:0,
RESERVED_SWITCH_21_BIT15:0,
RESERVED_SWITCH_21_BIT16:0,
RESERVED_SWITCH_21_BIT17:0,
RESERVED_SWITCH_21_BIT18:0,
RESERVED_SWITCH_21_BIT19:0,
RESERVED_SWITCH_21_BIT20:0,
RESERVED_SWITCH_21_BIT21:0,
RESERVED_SWITCH_21_BIT22:0,
RESERVED_SWITCH_21_BIT23:0,
RESERVED_SWITCH_21_BIT24:0,
RESERVED_SWITCH_21_BIT25:0,
RESERVED_SWITCH_21_BIT26:0,
RESERVED_SWITCH_21_BIT27:0,
RESERVED_SWITCH_21_BIT28:0,
RESERVED_SWITCH_21_BIT29:0,
RESERVED_SWITCH_21_BIT30:0,
RESERVED_SWITCH_21_BIT31:0,
RESERVED_SWITCH_21_BIT32:0
RESERVED_SWITCH_21_BIT4,
RESERVED_SWITCH_21_BIT5,
RESERVED_SWITCH_21_BIT6,
RESERVED_SWITCH_21_BIT7,
RESERVED_SWITCH_21_BIT8,
RESERVED_SWITCH_21_BIT9,
RESERVED_SWITCH_21_BIT10,
RESERVED_SWITCH_21_BIT11,
RESERVED_SWITCH_21_BIT12,
RESERVED_SWITCH_21_BIT13,
RESERVED_SWITCH_21_BIT14,
RESERVED_SWITCH_21_BIT15,
RESERVED_SWITCH_21_BIT16,
RESERVED_SWITCH_21_BIT17,
RESERVED_SWITCH_21_BIT18,
RESERVED_SWITCH_21_BIT19,
RESERVED_SWITCH_21_BIT20,
RESERVED_SWITCH_21_BIT21,
RESERVED_SWITCH_21_BIT22,
RESERVED_SWITCH_21_BIT23,
RESERVED_SWITCH_21_BIT24,
RESERVED_SWITCH_21_BIT25,
RESERVED_SWITCH_21_BIT26,
RESERVED_SWITCH_21_BIT27,
RESERVED_SWITCH_21_BIT28,
RESERVED_SWITCH_21_BIT29,
RESERVED_SWITCH_21_BIT30,
RESERVED_SWITCH_21_BIT31,
RESERVED_SWITCH_21_BIT32
Default Value: RESERVED_SWITCH_21_BIT1:0,
RESERVED_SWITCH_21_BIT2:0,
RESERVED_SWITCH_21_BIT3:0,
RESERVED_SWITCH_21_BIT4:0,
RESERVED_SWITCH_21_BIT5:0,
RESERVED_SWITCH_21_BIT6:0,
RESERVED_SWITCH_21_BIT7:0,
RESERVED_SWITCH_21_BIT8:0,
RESERVED_SWITCH_21_BIT9:0,
RESERVED_SWITCH_21_BIT10:0,
RESERVED_SWITCH_21_BIT11:0,
RESERVED_SWITCH_21_BIT12:0,
RESERVED_SWITCH_21_BIT13:0,
RESERVED_SWITCH_21_BIT14:0,
RESERVED_SWITCH_21_BIT15:0,
RESERVED_SWITCH_21_BIT16:0,
RESERVED_SWITCH_21_BIT17:0,
RESERVED_SWITCH_21_BIT18:0,
RESERVED_SWITCH_21_BIT19:0,
RESERVED_SWITCH_21_BIT20:0,
RESERVED_SWITCH_21_BIT21:0,
RESERVED_SWITCH_21_BIT22:0,
RESERVED_SWITCH_21_BIT23:0,
RESERVED_SWITCH_21_BIT24:0,
RESERVED_SWITCH_21_BIT25:0,
RESERVED_SWITCH_21_BIT26:0,
RESERVED_SWITCH_21_BIT27:0,
RESERVED_SWITCH_21_BIT28:0,
RESERVED_SWITCH_21_BIT29:0,
RESERVED_SWITCH_21_BIT30:0,
RESERVED_SWITCH_21_BIT31:0,
RESERVED_SWITCH_21_BIT32:0
U2LSer BSC690 SET WRFD- PS Meaning: Timer for periodically triggering service-
vPrdTri 0 UU2LT 020129 Service based UMTS-to-LTE PS handover or redirection. The
gTimerL EHONC WRFD- Redirect value 0 indicates that this timer is disabled.
en OV 140218 ion from GUI Value Range: 0~65535
UMTS
to LTE Unit: s
U2LSer BSC691 SET WRFD- PS Meaning: Timer for periodically triggering service-
vPrdTri 0 UU2LT 020129 Service based UMTS-to-LTE PS handover or redirection. The
gTimerL EHONC WRFD- Redirect value 0 indicates that this timer is disabled.
en OV 140218 ion from GUI Value Range: 0~65535
UMTS
to LTE Unit: s
BestCell BSC690 ADD WRFD- PS Meaning: Whether the RNC triggers service-based
TrigLTE 0 UCELL 020129 Service LTE cell handovers or redirections when the best cell
MeasSw U2LTE WRFD- Redirect that a UE camps on changes. The best cell can be an
itch HONCO 020504 ion from intra-frequency or inter-frequency cell. When the
V UMTS switch is turned on, the RNC triggers service-based
WRFD- to LTE LTE cell handovers or redirections after the best cell
MOD 140218
UCELL Inner changes. When the switch is turned off, the RNC does
U2LTE Loop not trigger service-based LTE cell handovers or
HONCO Power redirections after the best cell changes.
V Control GUI Value Range: OFF, ON
Service- Unit: None
Based Actual Value Range: OFF, ON
PS
Handov Default Value: OFF
er from
UMTS
to LTE
BestCell BSC691 ADD WRFD- PS Meaning: Whether the RNC triggers service-based
TrigLTE 0 UCELL 020129 Service LTE cell handovers or redirections when the best cell
MeasSw U2LTE WRFD- Redirect that a UE camps on changes. The best cell can be an
itch HONCO 020504 ion from intra-frequency or inter-frequency cell. When the
V UMTS switch is turned on, the RNC triggers service-based
WRFD- to LTE LTE cell handovers or redirections after the best cell
MOD 140218
UCELL Inner changes. When the switch is turned off, the RNC does
U2LTE Loop not trigger service-based LTE cell handovers or
HONCO Power redirections after the best cell changes.
V Control GUI Value Range: OFF, ON
Service- Unit: None
Based Actual Value Range: OFF, ON
PS
Handov Default Value: OFF
er from
UMTS
to LTE
BestCell BSC690 SET WRFD- PS Meaning: Whether the RNC triggers service-based
TrigLTE 0 UU2LT 020129 Service LTE cell handovers or redirections when the best cell
MeasSw EHONC WRFD- Redirect that a UE camps on changes. The best cell can be an
itch OV 020504 ion from intra-frequency or inter-frequency cell. When the
UMTS switch is turned on, the RNC triggers service-based
WRFD- to LTE LTE cell handovers or redirections after the best cell
140218 changes. When the switch is turned off, the RNC does
Inner
Loop not trigger service-based LTE cell handovers or
Power redirections after the best cell changes.
Control GUI Value Range: OFF, ON
Service- Unit: None
Based Actual Value Range: OFF, ON
PS
Handov Default Value: OFF
er from
UMTS
to LTE
BestCell BSC691 SET WRFD- PS Meaning: Whether the RNC triggers service-based
TrigLTE 0 UU2LT 020129 Service LTE cell handovers or redirections when the best cell
MeasSw EHONC WRFD- Redirect that a UE camps on changes. The best cell can be an
itch OV 020504 ion from intra-frequency or inter-frequency cell. When the
UMTS switch is turned on, the RNC triggers service-based
WRFD- to LTE LTE cell handovers or redirections after the best cell
140218 changes. When the switch is turned off, the RNC does
Inner
Loop not trigger service-based LTE cell handovers or
Power redirections after the best cell changes.
Control GUI Value Range: OFF, ON
Service- Unit: None
Based Actual Value Range: OFF, ON
PS
Handov Default Value: OFF
er from
UMTS
to LTE
U2LNC BSC690 ADD WRFD- PS Meaning: Threshold for the number of users in
ovPSCm 0 UCELL 020129 Service compressed mode for triggering the service-based
UserNu CMUSE WRFD- Redirect UMTS-to-LTE measurement. UEs are allowed to
mThd RNUM 140218 ion from perform service-based LTE measurement in
MOD UMTS compressed mode only when the number of UEs in
UCELL to LTE compressed mode in all cells in the active set is less
CMUSE Service- than this threshold. When this parameter is set to 0,
RNUM Based the restriction is not effective.
PS GUI Value Range: 0~255
Handov Unit: None
er from
UMTS Actual Value Range: 0~255
to LTE Default Value: 0
U2LNC BSC691 ADD WRFD- PS Meaning: Threshold for the number of users in
ovPSCm 0 UCELL 020129 Service compressed mode for triggering the service-based
UserNu CMUSE WRFD- Redirect UMTS-to-LTE measurement. UEs are allowed to
mThd RNUM 140218 ion from perform service-based LTE measurement in
MOD UMTS compressed mode only when the number of UEs in
UCELL to LTE compressed mode in all cells in the active set is less
CMUSE Service- than this threshold. When this parameter is set to 0,
RNUM Based the restriction is not effective.
PS GUI Value Range: 0~255
Handov Unit: None
er from
UMTS Actual Value Range: 0~255
to LTE Default Value: 0
LTEMea BSC690 ADD WRFD- PS Meaning: This parameter specifies the type of
sTypOf3 0 UCELL 020129 Service measurement result that a UE needs to carry in an
C U2LTE Redirect event-triggered or periodical measurement report.
HONCO ion from When this parameter is set to Measurementquantity,
V UMTS the parameter value is the same as that of
MOD to LTE "Measurement Quantity for Event 3C Measurement of
UCELL LTE". When this parameter is set to Both, the UE
U2LTE needs to report measurement results of both the types:
HONCO Reference Signal Received Power (RSRP) and
V Reference Signal Receiving Quality (RSRQ).
GUI Value Range: MeasurementQuanti-
ty(MeasurementQuantity), Both(Both)
Unit: None
Actual Value Range: MeasurementQuantity, Both
Default Value: MeasurementQuanti-
ty(MeasurementQuantity)
LTEMea BSC691 ADD WRFD- PS Meaning: This parameter specifies the type of
sTypOf3 0 UCELL 020129 Service measurement result that a UE needs to carry in an
C U2LTE Redirect event-triggered or periodical measurement report.
HONCO ion from When this parameter is set to Measurementquantity,
V UMTS the parameter value is the same as that of
MOD to LTE "Measurement Quantity for Event 3C Measurement of
UCELL LTE". When this parameter is set to Both, the UE
U2LTE needs to report measurement results of both the types:
HONCO Reference Signal Received Power (RSRP) and
V Reference Signal Receiving Quality (RSRQ).
GUI Value Range: MeasurementQuanti-
ty(MeasurementQuantity), Both(Both)
Unit: None
Actual Value Range: MeasurementQuantity, Both
Default Value: MeasurementQuanti-
ty(MeasurementQuantity)
U2LTE BSC690 ADD WRFD- PS Meaning: Length of a timer for LTE cell
MeasTi 0 UCELL 020129 Service measurements. The RNC starts the timer to perform
me U2LTE Redirect LTE cell measurements. When the timer expires, the
HONCO ion from RNC stops measuring LTE cells. If the parameter is
V UMTS set to 0, the RNC keeps measuring the LTE cells.
MOD to LTE GUI Value Range: 0~512
UCELL Unit: s
U2LTE
HONCO Actual Value Range: 0~512
V Default Value: 5
U2LTE BSC691 ADD WRFD- PS Meaning: Length of a timer for LTE cell
MeasTi 0 UCELL 020129 Service measurements. The RNC starts the timer to perform
me U2LTE Redirect LTE cell measurements. When the timer expires, the
HONCO ion from RNC stops measuring LTE cells. If the parameter is
V UMTS set to 0, the RNC keeps measuring the LTE cells.
MOD to LTE GUI Value Range: 0~512
UCELL Unit: s
U2LTE
HONCO Actual Value Range: 0~512
V Default Value: 5
TargetR BSC690 ADD WRFD- PS Meaning: RSRP threshold for event 3C for LTE cell
atThdRS 0 UCELL 020129 Service measurements during a non-coverage-based handover.
RP U2LTE WRFD- Redirect If RSRP is used as the measurement quantity for event
HONCO 140218 ion from 3C, event 3C can be triggered only when the signal
V UMTS quality of the target cell is greater than the
MOD to LTE threshold.For details about this parameter, see section
UCELL Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
U2LTE Based in 3GPP TS 25.331. The RNC carries the Threshold
HONCO PS other system IE in the measurement control message
V Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system - 25 [dBm], Threshold
to LTE other system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC691 ADD WRFD- PS Meaning: RSRP threshold for event 3C for LTE cell
atThdRS 0 UCELL 020129 Service measurements during a non-coverage-based handover.
RP U2LTE WRFD- Redirect If RSRP is used as the measurement quantity for event
HONCO 140218 ion from 3C, event 3C can be triggered only when the signal
V UMTS quality of the target cell is greater than the
MOD to LTE threshold.For details about this parameter, see section
UCELL Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
U2LTE Based in 3GPP TS 25.331. The RNC carries the Threshold
HONCO PS other system IE in the measurement control message
V Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system - 25 [dBm], Threshold
to LTE other system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC690 ADD WRFD- PS Meaning: RSRQ threshold for event 3C for LTE cell
atThdRS 0 UCELL 020129 Service measurements during a non-coverage-based handover.
RQ U2LTE WRFD- Redirect If RSRQ is used as the measurement quantity for
HONCO 140218 ion from event 3C, event 3C can be triggered only when the
V UMTS signal quality of the target cell is greater than the
MOD to LTE threshold. For details about this parameter, see section
UCELL Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
U2LTE Based in 3GPP TS 25.331. The RNC carries the Threshold
HONCO PS other system IE in the measurement control message
V Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system/2 [dB], Threshold
to LTE other system = GUI value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
TargetR BSC691 ADD WRFD- PS Meaning: RSRQ threshold for event 3C for LTE cell
atThdRS 0 UCELL 020129 Service measurements during a non-coverage-based handover.
RQ U2LTE WRFD- Redirect If RSRQ is used as the measurement quantity for
HONCO 140218 ion from event 3C, event 3C can be triggered only when the
V UMTS signal quality of the target cell is greater than the
MOD to LTE threshold. For details about this parameter, see section
UCELL Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
U2LTE Based in 3GPP TS 25.331. The RNC carries the Threshold
HONCO PS other system IE in the measurement control message
V Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system/2 [dB], Threshold
to LTE other system = GUI value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
Hystfor3 BSC690 ADD WRFD- PS Meaning: This parameter specifies the hysteresis for a
C 0 UCELL 020129 Service UE to report event 3C. For detailed description of the
U2LTE WRFD- Redirect parameter, see 3GPP TS 25.331.
HONCO 140218 ion from GUI Value Range: 0~15
V UMTS
to LTE Unit: 0.5dB
MOD
UCELL Service- Actual Value Range: 0~7.5
U2LTE Based Default Value: 4
HONCO PS
V Handov
er from
UMTS
to LTE
Hystfor3 BSC691 ADD WRFD- PS Meaning: This parameter specifies the hysteresis for a
C 0 UCELL 020129 Service UE to report event 3C. For detailed description of the
U2LTE WRFD- Redirect parameter, see 3GPP TS 25.331.
HONCO 140218 ion from GUI Value Range: 0~15
V UMTS
to LTE Unit: 0.5dB
MOD
UCELL Service- Actual Value Range: 0~7.5
U2LTE Based Default Value: 4
HONCO PS
V Handov
er from
UMTS
to LTE
TrigTim BSC690 ADD WRFD- PS Meaning: This parameter specifies the interval time
e3C 0 UCELL 020129 Service between detection of event 3C and sending of the
U2LTE WRFD- Redirect measurement report. How to set this parameter is
HONCO 140218 ion from related to slow fading. For detailed description of the
V UMTS parameter, see 3GPP TS 25.331.
MOD to LTE GUI Value Range: D0, D10, D20, D40, D60, D80,
UCELL Service- D100, D120, D160, D200, D240, D320, D640,
U2LTE Based D1280, D2560, D5000
HONCO PS Unit: ms
V Handov
er from Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
UMTS 160, 200, 240, 320, 640, 1280, 2560, 5000
to LTE Default Value: D0
TrigTim BSC691 ADD WRFD- PS Meaning: This parameter specifies the interval time
e3C 0 UCELL 020129 Service between detection of event 3C and sending of the
U2LTE WRFD- Redirect measurement report. How to set this parameter is
HONCO 140218 ion from related to slow fading. For detailed description of the
V UMTS parameter, see 3GPP TS 25.331.
MOD to LTE GUI Value Range: D0, D10, D20, D40, D60, D80,
UCELL Service- D100, D120, D160, D200, D240, D320, D640,
U2LTE Based D1280, D2560, D5000
HONCO PS Unit: ms
V Handov
er from Actual Value Range: 0, 10, 20, 40, 60, 80, 100, 120,
UMTS 160, 200, 240, 320, 640, 1280, 2560, 5000
to LTE Default Value: D0
U2LPun BSC690 SET WRFD- PS Meaning: Whether the function of preventing service-
ishSwitc 0 UU2LT 020129 Service based ping-pong handovers or redirections between
h EHONC WRFD- Redirect UMTS cells and LTE cells takes effect. When this
OV 020504 ion from switch is turned on, the function takes effect.
UMTS Otherwise, the function does not take effect.
WRFD- to LTE
140218 GUI Value Range: OFF, ON
Inner Unit: None
Loop
Power Actual Value Range: OFF, ON
Control Default Value: OFF
Service-
Based
PS
Handov
er from
UMTS
to LTE
U2LPun BSC691 SET WRFD- PS Meaning: Whether the function of preventing service-
ishSwitc 0 UU2LT 020129 Service based ping-pong handovers or redirections between
h EHONC WRFD- Redirect UMTS cells and LTE cells takes effect. When this
OV 020504 ion from switch is turned on, the function takes effect.
UMTS Otherwise, the function does not take effect.
WRFD- to LTE
140218 GUI Value Range: OFF, ON
Inner Unit: None
Loop
Power Actual Value Range: OFF, ON
Control Default Value: OFF
Service-
Based
PS
Handov
er from
UMTS
to LTE
U2LPun BSC690 SET WRFD- PS Meaning: Timer during which service-based ping-
ishTime 0 UU2LT 020129 Service pong handovers or redirections between UMTS cells
r EHONC WRFD- Redirect and LTE cells are prevented. When this parameter is
OV 140218 ion from set to 0, the service-based ping-pong handovers or
UMTS redirections between UMTS cells and LTE cells are
to LTE allowed.
Service- GUI Value Range: 0~65535
Based Unit: s
PS
Handov Actual Value Range: 0~65535
er from Default Value: 20
UMTS
to LTE
U2LPun BSC691 SET WRFD- PS Meaning: Timer during which service-based ping-
ishTime 0 UU2LT 020129 Service pong handovers or redirections between UMTS cells
r EHONC WRFD- Redirect and LTE cells are prevented. When this parameter is
OV 140218 ion from set to 0, the service-based ping-pong handovers or
UMTS redirections between UMTS cells and LTE cells are
to LTE allowed.
Service- GUI Value Range: 0~65535
Based Unit: s
PS
Handov Actual Value Range: 0~65535
er from Default Value: 20
UMTS
to LTE
AntiPin BSC690 SET WRFD- Load Meaning: Whether a UE that is redirected from the
panLteF 0 UU2LT 150217 Based LTE network to the UMTS network can be redirected
ddRedrS EHONC WRFD- PS back to an LTE FDD frequency. When this switch is
witch OV 140218 Handov turned on, the UE cannot initiate the redirection to an
er from LTE FDD frequency, which prevents ping-pong
UMTS redirections between the UMTS network and the LTE
to LTE network. When this switch is turned off, the UE can
Service- be redirected to an LTE FDD frequency.
Based GUI Value Range: OFF, ON
PS Unit: None
Handov
er from Actual Value Range: OFF, ON
UMTS Default Value: OFF
to LTE
AntiPin BSC691 SET WRFD- Load Meaning: Whether a UE that is redirected from the
panLteF 0 UU2LT 150217 Based LTE network to the UMTS network can be redirected
ddRedrS EHONC WRFD- PS back to an LTE FDD frequency. When this switch is
witch OV 140218 Handov turned on, the UE cannot initiate the redirection to an
er from LTE FDD frequency, which prevents ping-pong
UMTS redirections between the UMTS network and the LTE
to LTE network. When this switch is turned off, the UE can
Service- be redirected to an LTE FDD frequency.
Based GUI Value Range: OFF, ON
PS Unit: None
Handov
er from Actual Value Range: OFF, ON
UMTS Default Value: OFF
to LTE
PS 8. PERFENH_MR_CLASSIFY_SWITCH: Whether
Service to classify measurement reports (MRs). When this
Redirect switch is set to on, the RNC classifies MRs based on
ion from the thresholds set by the "ADD UCELLMR" or
UMTS "MOD UCELLMR" command, which improves the
to LTE efficiency of data analyzing for the SAU. When this
Inter switch is set to off, the RNC does not classify MRs.
Frequen 9.
cy Hard PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
Handov TCH: Whether to trigger measurement control for
er Based service-based UMTS-to-LTE handover or redirection
on after a best cell change when HSPA services cannot
Coverag coexist with the compressed mode. When this switch
e is set to on, measurement control for service-based
Inter- UMTS-to-LTE handover or redirection can be
RAT triggered after a best cell change when HSPA services
Handov cannot coexist with the compressed mode. When this
er Based switch is set to off, measurement control for service-
on based UMTS-to-LTE handover or redirection cannot
Coverag be triggered after a best cell change when HSPA
e services cannot coexist with the compressed mode.
AMR/W 10.
B-AMR PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH:
Speech Whether the optimized solution for selecting the target
Rates cell takes effect during a channel rate increase. When
Control this switch is turned on. The optimized solution for
selecting the target cell takes effect during the channel
rate increase. The RNC uses the following rules in
sequence when selecting the target cell: 1) If a channel
fallback from the E-DCH to the DCH or from the HS-
DSCH to the DCH occurs in a cell, the RNC does not
select the cell as the target cell. 2) If a channel
fallback from the DCH to the E-DCH in the uplink or
from the DCH to the HS-DSCH in the downlink
occurs in a cell, the RNC selects the cell as the target
cell. 3) If HSPA+ fallback occurs in a cell, the RNC
does not select the cell as the target cell. 4) If rate
decrease occurs on the uplink or downlink channel in
a cell, the RNC does not select the cell as the target
cell. 5) If rate increase occurs on the uplink or
downlink channel in a cell, the RNC selects the cell as
the target cell. Otherwise, the RNC does not select the
cell as the target cell. When this switch is turned off.
The optimized solution for selecting the DRD target
cell does not take effect during the channel rate
increase. The RNC uses the following rules in
sequence when selecting the target cell: 1) If a channel
fallback from the E-DCH to the DCH or from the HS-
14.
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH: Whether the RNC applies a penalty to the target
cell after an inter-frequency CLB handover between
cells under different RNCs fails. When this switch is
turned on, the RNC applies a penalty to the target cell
whenever it receives a RELOCATION
PREPARATION FAILURE or RNSAP RADIO LINK
SETUP FAILURE message. When this switch is
turned off, the RNC applies a penalty to the target cell
only when it receives a failure indication message
with cause value "Resource Unavailable".
The RNC applies a penalty to the target cell in the
following scenarios:
1) After the relocation with an inter-frequency CLB
hard handover fails, the RNC receives a
RELOCATION PREPARATION FAILURE with one
the following cause values:
No Radio Resources Available in Target Cell
Traffic Load In The Target Cell Higher Than In The
Source Cell.
2) After an inter-frequency CLB hard handover fails,
the RNC receives an RNSAP RADIO LINK SETUP
FAILURE message with one the following cause
values:
DL Radio Resources not Available
UL Radio Resources not Available
Traffic Load In The Target Cell Higher Than In The
Source Cell.
15. PERFENH_LTE_MC_REL_OPT_SWITCH:
Whether to optimize the LTE measurement control
release procedure. This switch specifies scenarios
where the RNC can trigger LTE measurement control
release when the switch for service-based UMTS-to-
LTE handover or redirection is set to off. When this
switch is set to off, the RNC triggers LTE
measurement control release only when the CN
domain or service bearer channel type changes. When
this switch is set to on, the RNC triggers LTE
measurement control release also in scenarios such as
service rate change, service setup, or service release,
in addition to the preceding scenarios. .
16.
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH:
Whether the RNC performs an H2D channel fallback
for HSPA UEs that do not need to start measurement
26.
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
CH: Whether the EARFCNs filled out in a blind fast
return procedure are filtered based on operators for
UEs carried on the CCH. When this switch is set to
on, the EARFCNs filled out in the blind fast return
procedure are filtered based on operators. That is, only
the EARFCNs belonging to the UE's access operator
are filled out. When this switch is set to off, the
EARFCNs filled out in the blind fast return procedure
are not filtered based on operators.
27.
PERFENH_DCCH_CONG_F2D_FAIL_END_SWIT
CH: Whether the RNC terminates failed F2D state
transition procedures caused by DCCH congestion.
When the RNC terminates failed F2D state transition
procedures, the RNC does not perform channel
fallback or a DRD procedure. F2D state transition
refers to the transition of the state from CELL_FACH
to CELL_DCH. When the switch is turned on, the
RNC terminates failed F2D state transition procedures
caused by DCCH congestion. When the switch is set
to off, the RNC performs channel fallback or a DRD
procedure if the state transition failure is caused by
DCCH congestion.
28.
PERFENH_MR_D2P_RPRT_TO_OMU_SWITCH:
Whether the measurement report (MR) is reported to
the OMU after a state transition from CELL_DCH to
CELL_PCH/URA_PCH (D2P). When this switch is
set to on, the MR is reported to the OMU after a D2P
state transition. When this switch is set to off, the MR
is not reported to the OMU after a D2P state
transition.
29.
PERFENH_IUUP_RC_ACK_COMPATIBLE_SWIT
CH: Switch for handling the incorrect RAB Subflow
Combination Indicator (RFCI) included in the IUUP
rate control ACK message sent by the CN. When this
switch is set to on: 1. When the
Switch3GPP25415CR0125 parameter is set to on, the
maximum rate for the reverse direction is included in
the IUUP rate control ACK message for AMR
services (the maximum rate in the ACK message is
the maximum uplink rate supported by the local end).
If the maximum rate in the ACK message exceeds the
current uplink rate of the local end, the RNC does not
increase the uplink rate of the local end (Data
CH,
PERFENH_L2U_IDENTIFY_ENHANCE_SWITCH
Unit: None
Actual Value Range:
PERFENH_INTRAFREQ_NCELL_MAX_NUM_S
WITCH,
PERFENH_CELL_HSDPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_PTT_COMB_RAB_TTI_CTRL_SWITC
H, PERFENH_CSFB_SRB_RATE_OPT_SWITCH,
PERFENH_QOS_OPT_SWITCH,
PERFENH_DRL_SHO_SCRAMBLE_SEL_SWITC
H,
PERFENH_LOW_PRIO_MC_BUFFPROC_SWITC
H, PERFENH_MR_CLASSIFY_SWITCH,
PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
TCH,
PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH,
PERFENH_ONLYSRBONDCH_SRB_TFOPT_SWI
TCH,
PERFENH_RB_RECFG_TIMEOUT_DRD_SWITC
H,
PERFENH_SYSHO_IN_BE_RATE_DOWN_SWITC
H,
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH, PERFENH_LTE_MC_REL_OPT_SWITCH,
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH,
PERFENH_F2D_FAIL_OPT_SWITCH,
PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWI
TCH,
PERFENH_CSPS_RELOCIN_BE_DOWNRATE_S
WITCH,
PERFENH_CSPS_RELOCIN_LDR_DOWNRATE_S
WITCH,
PERFENH_TTI_10MS_TO_2MS_RECFG_OPT_SW
ITCH,
PERFENH_RRC_REDIR_DIST_INTRA_PROT_SW
ITCH,
SERV_CELL_CHG_WITH_SRB_MOD_OPT_SWIT
CH,
PERFENH_DRD2STEP_AND_SHO_PROC_OPT_S
WITCH,
PERFENH_FAST_RETURN_DCH_OP_SEL_SWIT
CH,
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
CH,
PERFENH_DCCH_CONG_F2D_FAIL_END_SWIT
CH,
PERFENH_MR_D2P_RPRT_TO_OMU_SWITCH,
PERFENH_IUUP_RC_ACK_COMPATIBLE_SWIT
CH,
PERFENH_L2U_IDENTIFY_ENHANCE_SWITCH
Default Value:
PERFENH_INTRAFREQ_NCELL_MAX_NUM_S
WITCH:1,
PERFENH_CELL_HSDPA_CAP_CHANGE_OPT_S
WITCH:0,
PERFENH_PTT_COMB_RAB_TTI_CTRL_SWITC
H:0, PERFENH_CSFB_SRB_RATE_OPT_SWITCH:
1, PERFENH_QOS_OPT_SWITCH:1,
PERFENH_DRL_SHO_SCRAMBLE_SEL_SWITC
H:1,
PERFENH_LOW_PRIO_MC_BUFFPROC_SWITC
H:1, PERFENH_MR_CLASSIFY_SWITCH:0,
PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
TCH:0,
PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH:
1,
PERFENH_ONLYSRBONDCH_SRB_TFOPT_SWI
TCH:0,
PERFENH_RB_RECFG_TIMEOUT_DRD_SWITC
H:1,
PERFENH_SYSHO_IN_BE_RATE_DOWN_SWITC
H:0,
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH:0, PERFENH_LTE_MC_REL_OPT_SWITCH:
1,
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH:
0, PERFENH_F2D_FAIL_OPT_SWITCH:1,
PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWI
TCH:0,
PERFENH_CSPS_RELOCIN_BE_DOWNRATE_S
WITCH:0,
PERFENH_CSPS_RELOCIN_LDR_DOWNRATE_S
WITCH:
0,PERFENH_TTI_10MS_TO_2MS_RECFG_OPT_S
WITCH:0,
PERFENH_RRC_REDIR_DIST_INTRA_PROT_SW
ITCH:0,
SERV_CELL_CHG_WITH_SRB_MOD_OPT_SWIT
CH:1,
PERFENH_DRD2STEP_AND_SHO_PROC_OPT_S
WITCH:0,
PERFENH_FAST_RETURN_DCH_OP_SEL_SWIT
CH:0,
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
PS 8. PERFENH_MR_CLASSIFY_SWITCH: Whether
Service to classify measurement reports (MRs). When this
Redirect switch is set to on, the RNC classifies MRs based on
ion from the thresholds set by the "ADD UCELLMR" or
UMTS "MOD UCELLMR" command, which improves the
to LTE efficiency of data analyzing for the SAU. When this
Inter switch is set to off, the RNC does not classify MRs.
Frequen 9.
cy Hard PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
Handov TCH: Whether to trigger measurement control for
er Based service-based UMTS-to-LTE handover or redirection
on after a best cell change when HSPA services cannot
Coverag coexist with the compressed mode. When this switch
e is set to on, measurement control for service-based
Inter- UMTS-to-LTE handover or redirection can be
RAT triggered after a best cell change when HSPA services
Handov cannot coexist with the compressed mode. When this
er Based switch is set to off, measurement control for service-
on based UMTS-to-LTE handover or redirection cannot
Coverag be triggered after a best cell change when HSPA
e services cannot coexist with the compressed mode.
AMR/W 10.
B-AMR PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH:
Speech Whether the optimized solution for selecting the target
Rates cell takes effect during a channel rate increase. When
Control this switch is turned on. The optimized solution for
selecting the target cell takes effect during the channel
rate increase. The RNC uses the following rules in
sequence when selecting the target cell: 1) If a channel
fallback from the E-DCH to the DCH or from the HS-
DSCH to the DCH occurs in a cell, the RNC does not
select the cell as the target cell. 2) If a channel
fallback from the DCH to the E-DCH in the uplink or
from the DCH to the HS-DSCH in the downlink
occurs in a cell, the RNC selects the cell as the target
cell. 3) If HSPA+ fallback occurs in a cell, the RNC
does not select the cell as the target cell. 4) If rate
decrease occurs on the uplink or downlink channel in
a cell, the RNC does not select the cell as the target
cell. 5) If rate increase occurs on the uplink or
downlink channel in a cell, the RNC selects the cell as
the target cell. Otherwise, the RNC does not select the
cell as the target cell. When this switch is turned off.
The optimized solution for selecting the DRD target
cell does not take effect during the channel rate
increase. The RNC uses the following rules in
sequence when selecting the target cell: 1) If a channel
fallback from the E-DCH to the DCH or from the HS-
14.
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH: Whether the RNC applies a penalty to the target
cell after an inter-frequency CLB handover between
cells under different RNCs fails. When this switch is
turned on, the RNC applies a penalty to the target cell
whenever it receives a RELOCATION
PREPARATION FAILURE or RNSAP RADIO LINK
SETUP FAILURE message. When this switch is
turned off, the RNC applies a penalty to the target cell
only when it receives a failure indication message
with cause value "Resource Unavailable".
The RNC applies a penalty to the target cell in the
following scenarios:
1) After the relocation with an inter-frequency CLB
hard handover fails, the RNC receives a
RELOCATION PREPARATION FAILURE with one
the following cause values:
No Radio Resources Available in Target Cell
Traffic Load In The Target Cell Higher Than In The
Source Cell.
2) After an inter-frequency CLB hard handover fails,
the RNC receives an RNSAP RADIO LINK SETUP
FAILURE message with one the following cause
values:
DL Radio Resources not Available
UL Radio Resources not Available
Traffic Load In The Target Cell Higher Than In The
Source Cell.
15. PERFENH_LTE_MC_REL_OPT_SWITCH:
Whether to optimize the LTE measurement control
release procedure. This switch specifies scenarios
where the RNC can trigger LTE measurement control
release when the switch for service-based UMTS-to-
LTE handover or redirection is set to off. When this
switch is set to off, the RNC triggers LTE
measurement control release only when the CN
domain or service bearer channel type changes. When
this switch is set to on, the RNC triggers LTE
measurement control release also in scenarios such as
service rate change, service setup, or service release,
in addition to the preceding scenarios. .
16.
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH:
Whether the RNC performs an H2D channel fallback
for HSPA UEs that do not need to start measurement
26.
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
CH: Whether the EARFCNs filled out in a blind fast
return procedure are filtered based on operators for
UEs carried on the CCH. When this switch is set to
on, the EARFCNs filled out in the blind fast return
procedure are filtered based on operators. That is, only
the EARFCNs belonging to the UE's access operator
are filled out. When this switch is set to off, the
EARFCNs filled out in the blind fast return procedure
are not filtered based on operators.
27.
PERFENH_DCCH_CONG_F2D_FAIL_END_SWIT
CH: Whether the RNC terminates failed F2D state
transition procedures caused by DCCH congestion.
When the RNC terminates failed F2D state transition
procedures, the RNC does not perform channel
fallback or a DRD procedure. F2D state transition
refers to the transition of the state from CELL_FACH
to CELL_DCH. When the switch is turned on, the
RNC terminates failed F2D state transition procedures
caused by DCCH congestion. When the switch is set
to off, the RNC performs channel fallback or a DRD
procedure if the state transition failure is caused by
DCCH congestion.
28.
PERFENH_MR_D2P_RPRT_TO_OMU_SWITCH:
Whether the measurement report (MR) is reported to
the OMU after a state transition from CELL_DCH to
CELL_PCH/URA_PCH (D2P). When this switch is
set to on, the MR is reported to the OMU after a D2P
state transition. When this switch is set to off, the MR
is not reported to the OMU after a D2P state
transition.
29.
PERFENH_IUUP_RC_ACK_COMPATIBLE_SWIT
CH: Switch for handling the incorrect RAB Subflow
Combination Indicator (RFCI) included in the IUUP
rate control ACK message sent by the CN. When this
switch is set to on: 1. When the
Switch3GPP25415CR0125 parameter is set to on, the
maximum rate for the reverse direction is included in
the IUUP rate control ACK message for AMR
services (the maximum rate in the ACK message is
the maximum uplink rate supported by the local end).
If the maximum rate in the ACK message exceeds the
current uplink rate of the local end, the RNC does not
increase the uplink rate of the local end (Data
CH,
PERFENH_L2U_IDENTIFY_ENHANCE_SWITCH
Unit: None
Actual Value Range:
PERFENH_INTRAFREQ_NCELL_MAX_NUM_S
WITCH,
PERFENH_CELL_HSDPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_PTT_COMB_RAB_TTI_CTRL_SWITC
H, PERFENH_CSFB_SRB_RATE_OPT_SWITCH,
PERFENH_QOS_OPT_SWITCH,
PERFENH_DRL_SHO_SCRAMBLE_SEL_SWITC
H,
PERFENH_LOW_PRIO_MC_BUFFPROC_SWITC
H, PERFENH_MR_CLASSIFY_SWITCH,
PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
TCH,
PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH,
PERFENH_ONLYSRBONDCH_SRB_TFOPT_SWI
TCH,
PERFENH_RB_RECFG_TIMEOUT_DRD_SWITC
H,
PERFENH_SYSHO_IN_BE_RATE_DOWN_SWITC
H,
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH, PERFENH_LTE_MC_REL_OPT_SWITCH,
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH,
PERFENH_F2D_FAIL_OPT_SWITCH,
PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWI
TCH,
PERFENH_CSPS_RELOCIN_BE_DOWNRATE_S
WITCH,
PERFENH_CSPS_RELOCIN_LDR_DOWNRATE_S
WITCH,
PERFENH_TTI_10MS_TO_2MS_RECFG_OPT_SW
ITCH,
PERFENH_RRC_REDIR_DIST_INTRA_PROT_SW
ITCH,
SERV_CELL_CHG_WITH_SRB_MOD_OPT_SWIT
CH,
PERFENH_DRD2STEP_AND_SHO_PROC_OPT_S
WITCH,
PERFENH_FAST_RETURN_DCH_OP_SEL_SWIT
CH,
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
CH,
PERFENH_DCCH_CONG_F2D_FAIL_END_SWIT
CH,
PERFENH_MR_D2P_RPRT_TO_OMU_SWITCH,
PERFENH_IUUP_RC_ACK_COMPATIBLE_SWIT
CH,
PERFENH_L2U_IDENTIFY_ENHANCE_SWITCH
Default Value:
PERFENH_INTRAFREQ_NCELL_MAX_NUM_S
WITCH:1,
PERFENH_CELL_HSDPA_CAP_CHANGE_OPT_S
WITCH:0,
PERFENH_PTT_COMB_RAB_TTI_CTRL_SWITC
H:0, PERFENH_CSFB_SRB_RATE_OPT_SWITCH:
1, PERFENH_QOS_OPT_SWITCH:1,
PERFENH_DRL_SHO_SCRAMBLE_SEL_SWITC
H:1,
PERFENH_LOW_PRIO_MC_BUFFPROC_SWITC
H:1, PERFENH_MR_CLASSIFY_SWITCH:0,
PERFENH_BESTCELLCHG_MC_TRIG_H2D_SWI
TCH:0,
PERFENH_DCCC_CELL_JUDGE_OPT_SWITCH:
1,
PERFENH_ONLYSRBONDCH_SRB_TFOPT_SWI
TCH:0,
PERFENH_RB_RECFG_TIMEOUT_DRD_SWITC
H:1,
PERFENH_SYSHO_IN_BE_RATE_DOWN_SWITC
H:0,
PERFENH_CLB_HO_FAIL_PUNISH_MODE_SWI
TCH:0, PERFENH_LTE_MC_REL_OPT_SWITCH:
1,
PERFENH_HSPA_CM_COEXIST_OPT_SWITCH:
0, PERFENH_F2D_FAIL_OPT_SWITCH:1,
PERFENH_CSFB_1ST_PS_AS_CSPS_COMB_SWI
TCH:0,
PERFENH_CSPS_RELOCIN_BE_DOWNRATE_S
WITCH:0,
PERFENH_CSPS_RELOCIN_LDR_DOWNRATE_S
WITCH:
0,PERFENH_TTI_10MS_TO_2MS_RECFG_OPT_S
WITCH:0,
PERFENH_RRC_REDIR_DIST_INTRA_PROT_SW
ITCH:0,
SERV_CELL_CHG_WITH_SRB_MOD_OPT_SWIT
CH:1,
PERFENH_DRD2STEP_AND_SHO_PROC_OPT_S
WITCH:0,
PERFENH_FAST_RETURN_DCH_OP_SEL_SWIT
CH:0,
PERFENH_FAST_RETURN_CCH_OP_SEL_SWIT
U2LSer BSC691 SET None None Meaning: The penalty duration during which service-
vMcTim 0 UU2LT based LTE measurement cannot be started again after
eOutPun EHONC the previous service-based LTE measurement control
ishTime OV is released. The types of service-based LTE
measurement control release that will be punished are
specified by the
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H under the "PerfEnhanceSwitch5" parameter in the
"SET UCORRMPARA" command.
GUI Value Range: 0~65535
Unit: s
Actual Value Range: 0~65535
Default Value: 90
U2LSer BSC690 SET None None Meaning: The penalty duration during which service-
vMcTim 0 UU2LT based LTE measurement cannot be started again after
eOutPun EHONC the previous service-based LTE measurement control
ishTime OV is released. The types of service-based LTE
measurement control release that will be punished are
specified by the
PERFENH_SERV_LTE_MC_PUNISH_OPT_SWITC
H under the "PerfEnhanceSwitch5" parameter in the
"SET UCORRMPARA" command.
GUI Value Range: 0~65535
Unit: s
Actual Value Range: 0~65535
Default Value: 90
U2LNC BSC690 SET WRFD- PS Meaning: Interval at which UEs send RSCP
ovRscpP 0 UU2LT 020129 Service measurement reports when the
rdTimer EHONC WRFD- Redirect HO_LTE_SERVICE_NEED_RSCP_SWITCH
OV 140218 ion from algorithm is enabled.
UMTS GUI Value Range: D250, D500, D1000, D2000,
to LTE D3000, D4000, D6000, D8000, D12000, D16000,
Service- D20000, D24000, D28000, D32000, D36000
Based Unit: ms
PS
Handov Actual Value Range: 250, 500, 1000, 2000, 3000,
er from 4000, 6000, 8000, 12000, 16000, 20000, 24000,
UMTS 28000, 32000, 64000
to LTE Default Value: D2000
U2LNC BSC691 SET WRFD- PS Meaning: Interval at which UEs send RSCP
ovRscpP 0 UU2LT 020129 Service measurement reports when the
rdTimer EHONC WRFD- Redirect HO_LTE_SERVICE_NEED_RSCP_SWITCH
OV 140218 ion from algorithm is enabled.
UMTS GUI Value Range: D250, D500, D1000, D2000,
to LTE D3000, D4000, D6000, D8000, D12000, D16000,
Service- D20000, D24000, D28000, D32000, D36000
Based Unit: ms
PS
Handov Actual Value Range: 250, 500, 1000, 2000, 3000,
er from 4000, 6000, 8000, 12000, 16000, 20000, 24000,
UMTS 28000, 32000, 64000
to LTE Default Value: D2000
UlPSU2 BSC690 ADD WRFD- Load Meaning: Number of UEs for performing uplink
LHOUe 0 UCELL 150216 Based UMTS-to-LTE PS handovers.
Num LDR WRFD- PS GUI Value Range: 1~10
MOD 150217 Redirect
ion from Unit: None
UCELL
LDR UMTS Actual Value Range: 1~10
to LTE Default Value: 1
Load
Based
PS
Handov
er from
UMTS
to LTE
UlPSU2 BSC691 ADD WRFD- Load Meaning: Number of UEs for performing uplink
LHOUe 0 UCELL 150216 Based UMTS-to-LTE PS handovers.
Num LDR WRFD- PS GUI Value Range: 1~10
MOD 150217 Redirect
ion from Unit: None
UCELL
LDR UMTS Actual Value Range: 1~10
to LTE Default Value: 1
Load
Based
PS
Handov
er from
UMTS
to LTE
DlPSU2 BSC690 ADD WRFD- Load Meaning: Number of UEs for performing downlink
LHOUe 0 UCELL 150216 Based UMTS-to-LTE PS handovers.
Num LDR WRFD- PS GUI Value Range: 1~10
MOD 150217 Redirect
ion from Unit: None
UCELL
LDR UMTS Actual Value Range: 1~10
to LTE Default Value: 1
Load
Based
PS
Handov
er from
UMTS
to LTE
DlPSU2 BSC691 ADD WRFD- Load Meaning: Number of UEs for performing downlink
LHOUe 0 UCELL 150216 Based UMTS-to-LTE PS handovers.
Num LDR WRFD- PS GUI Value Range: 1~10
MOD 150217 Redirect
ion from Unit: None
UCELL
LDR UMTS Actual Value Range: 1~10
to LTE Default Value: 1
Load
Based
PS
Handov
er from
UMTS
to LTE
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,
PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,
PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Default Value:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH:
0,PERFENH_INITIAL_NCELLDETECT_SWITCH:
0,PERFENH_VP_TO_AMR_SWITCH:
1,PERFENH_AMRC_TFI_CMP_SWITCH:
0,PERFENH_MR_AGPS_CMP_SWITCH:
0,PERFENH_AMRC_NACK_SWITCH:
0,PERFENH_MCDRD_OPT_SWITCH:
0,PERFENH_MCDRD_MEAS_OPT_SWITCH:
1,PERFENH_UE_LOC_DRD_OPT_SWITCH:
1,PERFENH_PS_FAST_RETURN_LTE_SWITCH:
0,PERFENH_FORCE_AMR_INTER_RAT_OUT_S
WITCH:0,PERFENH_INACTIVE_F2P_SWITCH:
0,PERFENH_NB_AMRC_UL_RATESET_EXT_SWI
TCH:
0,PERFENH_DC_USERNUM_LDB_OPT_SWITCH
:0,PERFENH_DCH_TRCH_OPT_SWITCH:
0,PERFENH_RB_MAPPING_OPT_SWITCH:
0,PERFENH_U2L_REDIR_WITH_BLACK_CELL_
SWITCH:
1,PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWI
TCH:0,PERFENH_HO_SIGNAL_SCENE_CTRL:
0,PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWIT
CH:
0,PERFENH_SPEC_PRD_HHO_DELAY_TIME_S
WITCH:
0,PERFENH_BASE_COV_BE_E2D_10MS_OFF_S
WITCH:
0,PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWI
TCH:
1,PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWI
TCH:
1,PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SW
ITCH:
1,PERFENH_OLPC_TBSIZE0_CMP_SWITCH:
0,PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH:
0,PERFENH_DYC_INIBITRATE_MULTI_SWITCH
:
0,PERFENH_RLRESETUP_GUARANTEE_SWITC
H:0,PERFENH_RLRESETUP_PREEMPT_SWITCH:
0
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Unit: None
Actual Value Range:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH,
PERFENH_INITIAL_NCELLDETECT_SWITCH,
PERFENH_VP_TO_AMR_SWITCH,
PERFENH_AMRC_TFI_CMP_SWITCH,
PERFENH_MR_AGPS_CMP_SWITCH,
PERFENH_AMRC_NACK_SWITCH,
PERFENH_MCDRD_OPT_SWITCH,
PERFENH_MCDRD_MEAS_OPT_SWITCH,
PERFENH_UE_LOC_DRD_OPT_SWITCH,
PERFENH_PS_FAST_RETURN_LTE_SWITCH,
PERFENH_FORCE_AMR_INTER_RAT_OUT_SWI
TCH, PERFENH_INACTIVE_F2P_SWITCH,
PERFENH_NB_AMRC_UL_RATESET_EXT_SWIT
CH,
PERFENH_DC_USERNUM_LDB_OPT_SWITCH,
PERFENH_DCH_TRCH_OPT_SWITCH,
PERFENH_RB_MAPPING_OPT_SWITCH,
PERFENH_U2L_REDIR_WITH_BLACK_CELL_S
WITCH,
PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWIT
CH, PERFENH_HO_SIGNAL_SCENE_CTRL,
PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWITC
H,
PERFENH_SPEC_PRD_HHO_DELAY_TIME_SWI
TCH,
PERFENH_BASE_COV_BE_E2D_10MS_OFF_SWI
TCH,
PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWIT
CH,
PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWIT
CH,
PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SWIT
CH, PERFENH_OLPC_TBSIZE0_CMP_SWITCH,
PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH,
PERFENH_DYC_INIBITRATE_MULTI_SWITCH,
PERFENH_RLRESETUP_GUARANTEE_SWITCH,
PERFENH_RLRESETUP_PREEMPT_SWITCH
Default Value:
PERFENH_COMM_PLMN_HO_ALLOWED_SWIT
CH:
0,PERFENH_INITIAL_NCELLDETECT_SWITCH:
0,PERFENH_VP_TO_AMR_SWITCH:
1,PERFENH_AMRC_TFI_CMP_SWITCH:
0,PERFENH_MR_AGPS_CMP_SWITCH:
0,PERFENH_AMRC_NACK_SWITCH:
0,PERFENH_MCDRD_OPT_SWITCH:
0,PERFENH_MCDRD_MEAS_OPT_SWITCH:
1,PERFENH_UE_LOC_DRD_OPT_SWITCH:
1,PERFENH_PS_FAST_RETURN_LTE_SWITCH:
0,PERFENH_FORCE_AMR_INTER_RAT_OUT_S
WITCH:0,PERFENH_INACTIVE_F2P_SWITCH:
0,PERFENH_NB_AMRC_UL_RATESET_EXT_SWI
TCH:
0,PERFENH_DC_USERNUM_LDB_OPT_SWITCH
:0,PERFENH_DCH_TRCH_OPT_SWITCH:
0,PERFENH_RB_MAPPING_OPT_SWITCH:
0,PERFENH_U2L_REDIR_WITH_BLACK_CELL_
SWITCH:
1,PERFENH_UL_RL_FAIL_SRV_CELL_CHG_SWI
TCH:0,PERFENH_HO_SIGNAL_SCENE_CTRL:
0,PERFENH_PS_CMTIMEOUT_UP_LIMIT_SWIT
CH:
0,PERFENH_SPEC_PRD_HHO_DELAY_TIME_S
WITCH:
0,PERFENH_BASE_COV_BE_E2D_10MS_OFF_S
WITCH:
0,PERFENH_RRC_CELL_HSUPA_CAP_CHG_SWI
TCH:
1,PERFENH_RRC_CELL_HSDPA_CAP_CHG_SWI
TCH:
1,PERFENH_CELL_TTI2MS_CAP_CHG_OPT_SW
ITCH:
1,PERFENH_OLPC_TBSIZE0_CMP_SWITCH:
0,PERFENH_UU_P2D_F2D_MSG_OPT_SWITCH:
0,PERFENH_DYC_INIBITRATE_MULTI_SWITCH
:
0,PERFENH_RLRESETUP_GUARANTEE_SWITC
H:0,PERFENH_RLRESETUP_PREEMPT_SWITCH:
0
U2LBlin BSC690 SET None None Meaning: Timer during which blind redirections to an
dRedirPi 0 UHOCO LTE network are prevented. If a UE performed a blind
ngpong MM redirection to an LTE network within 30 seconds
Timer before its request to establish a PS service in the
UMTS network, the RNC penalizes the UE for a
period set by this parameter. Within the penalty
period, the UE is not allowed to shift to the LTE
network through a blind redirection.
GUI Value Range: 0~65535
Unit: s
Actual Value Range: 0~65535
Default Value: 60
U2LBlin BSC691 SET None None Meaning: Timer during which blind redirections to an
dRedirPi 0 UHOCO LTE network are prevented. If a UE performed a blind
ngpong MM redirection to an LTE network within 30 seconds
Timer before its request to establish a PS service in the
UMTS network, the RNC penalizes the UE for a
period set by this parameter. Within the penalty
period, the UE is not allowed to shift to the LTE
network through a blind redirection.
GUI Value Range: 0~65535
Unit: s
Actual Value Range: 0~65535
Default Value: 60
McHsdp BSC690 SET None None Meaning: Whether the RNC reconfigures MC-HSDPA
aLteCM 0 UCMCF services as HSDPA services for UEs during the LTE
Permissi cell measurement in CM. If this parameter is set to
onInd FALSE, The RNC reconfigures MC-HSDPA services
as HSDPA services. If this parameter is set to TRUE,
The original algorithm applies.
GUI Value Range: FALSE(Forbidden), TRUE(Permit)
Unit: None
Actual Value Range:
FALSE,
TRUE
Default Value: TRUE(Permit)
McHsdp BSC691 SET None None Meaning: Whether the RNC reconfigures MC-HSDPA
aLteCM 0 UCMCF services as HSDPA services for UEs during the LTE
Permissi cell measurement in CM. If this parameter is set to
onInd FALSE, The RNC reconfigures MC-HSDPA services
as HSDPA services. If this parameter is set to TRUE,
The original algorithm applies.
GUI Value Range: FALSE(Forbidden), TRUE(Permit)
Unit: None
Actual Value Range:
FALSE,
TRUE
Default Value: TRUE(Permit)
PS_CM_COV_H2D_0K_SWITCH,
PS_CMACTIVE_PROCESS_OPT_SWITCH,
PS_CMTIMEOUT_UP_LIMIT_SWITCH,
PS_STREAM_IU_QOS_NEG_ENHANCE_SWITCH
, PS_STREAM_IU_QOS_RENEG_SWITCH,
PS_AMBR_ENABLE_SWITCH
Default Value:
PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH:
0,PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH:
0,PS_BE_IU_QOS_NEG_SWITCH:
0,PS_RAB_DOWNSIZING_SWITCH:
1,PS_STREAM_IU_QOS_NEG_SWITCH:
0,PS_BE_STRICT_IU_QOS_NEG_SWITCH:
0,HSPA_ADPTIVE_RATE_ALGO_SWITCH:
0,PS_CM_COV_H2D_0K_SWITCH:
0,PS_CMACTIVE_PROCESS_OPT_SWITCH:
0,PS_CMTIMEOUT_UP_LIMIT_SWITCH:
0,PS_STREAM_IU_QOS_NEG_ENHANCE_SWITC
H:0, PS_STREAM_IU_QOS_RENEG_SWITCH:1,
PS_AMBR_ENABLE_SWITCH:0
PS_CM_COV_H2D_0K_SWITCH,
PS_CMACTIVE_PROCESS_OPT_SWITCH,
PS_CMTIMEOUT_UP_LIMIT_SWITCH,
PS_STREAM_IU_QOS_NEG_ENHANCE_SWITCH
, PS_STREAM_IU_QOS_RENEG_SWITCH,
PS_AMBR_ENABLE_SWITCH
Default Value:
PS_BE_EXTRA_LOW_RATE_ACCESS_SWITCH:
0,PS_BE_INIT_RATE_DYNAMIC_CFG_SWITCH:
0,PS_BE_IU_QOS_NEG_SWITCH:
0,PS_RAB_DOWNSIZING_SWITCH:
1,PS_STREAM_IU_QOS_NEG_SWITCH:
0,PS_BE_STRICT_IU_QOS_NEG_SWITCH:
0,HSPA_ADPTIVE_RATE_ALGO_SWITCH:
0,PS_CM_COV_H2D_0K_SWITCH:
0,PS_CMACTIVE_PROCESS_OPT_SWITCH:
0,PS_CMTIMEOUT_UP_LIMIT_SWITCH:
0,PS_STREAM_IU_QOS_NEG_ENHANCE_SWITC
H:0, PS_STREAM_IU_QOS_RENEG_SWITCH:1,
PS_AMBR_ENABLE_SWITCH:0
RESERVED_SWITCH_14_BIT4,
RESERVED_SWITCH_14_BIT5,
RESERVED_SWITCH_14_BIT6,
RESERVED_SWITCH_14_BIT7,
RESERVED_SWITCH_14_BIT8,
RESERVED_SWITCH_14_BIT9,
RESERVED_SWITCH_14_BIT10,
RESERVED_SWITCH_14_BIT11,
RESERVED_SWITCH_14_BIT12,
RESERVED_SWITCH_14_BIT13,
RESERVED_SWITCH_14_BIT14,
RESERVED_SWITCH_14_BIT15,
RESERVED_SWITCH_14_BIT16,
RESERVED_SWITCH_14_BIT17,
RESERVED_SWITCH_14_BIT18,
RESERVED_SWITCH_14_BIT19,
RESERVED_SWITCH_14_BIT20,
RESERVED_SWITCH_14_BIT21,
RESERVED_SWITCH_14_BIT22,
RESERVED_SWITCH_14_BIT23,
RESERVED_SWITCH_14_BIT24,
RESERVED_SWITCH_14_BIT25,
RESERVED_SWITCH_14_BIT26,
RESERVED_SWITCH_14_BIT27,
RESERVED_SWITCH_14_BIT28,
RESERVED_SWITCH_14_BIT29,
RESERVED_SWITCH_14_BIT30,
RESERVED_SWITCH_14_BIT31,
RESERVED_SWITCH_14_BIT32
Default Value: RESERVED_SWITCH_14_BIT1:0,
RESERVED_SWITCH_14_BIT2:0,
RESERVED_SWITCH_14_BIT3:0,
RESERVED_SWITCH_14_BIT4:0,
RESERVED_SWITCH_14_BIT5:0,
RESERVED_SWITCH_14_BIT6:0,
RESERVED_SWITCH_14_BIT7:0,
RESERVED_SWITCH_14_BIT8:0,
RESERVED_SWITCH_14_BIT9:0,
RESERVED_SWITCH_14_BIT10:0,
RESERVED_SWITCH_14_BIT11:0,
RESERVED_SWITCH_14_BIT12:0,
RESERVED_SWITCH_14_BIT13:0,
RESERVED_SWITCH_14_BIT14:0,
RESERVED_SWITCH_14_BIT15:0,
RESERVED_SWITCH_14_BIT16:0,
RESERVED_SWITCH_14_BIT17:0,
RESERVED_SWITCH_14_BIT18:0,
RESERVED_SWITCH_14_BIT19:0,
RESERVED_SWITCH_14_BIT20:0,
RESERVED_SWITCH_14_BIT21:0,
RESERVED_SWITCH_14_BIT22:0,
RESERVED_SWITCH_14_BIT23:0,
RESERVED_SWITCH_14_BIT24:0,
RESERVED_SWITCH_14_BIT25:0,
RESERVED_SWITCH_14_BIT26:0,
RESERVED_SWITCH_14_BIT27:0,
RESERVED_SWITCH_14_BIT28:0,
RESERVED_SWITCH_14_BIT29:0,
RESERVED_SWITCH_14_BIT30:0,
RESERVED_SWITCH_14_BIT31:0,
RESERVED_SWITCH_14_BIT32:0
RESERVED_SWITCH_14_BIT4,
RESERVED_SWITCH_14_BIT5,
RESERVED_SWITCH_14_BIT6,
RESERVED_SWITCH_14_BIT7,
RESERVED_SWITCH_14_BIT8,
RESERVED_SWITCH_14_BIT9,
RESERVED_SWITCH_14_BIT10,
RESERVED_SWITCH_14_BIT11,
RESERVED_SWITCH_14_BIT12,
RESERVED_SWITCH_14_BIT13,
RESERVED_SWITCH_14_BIT14,
RESERVED_SWITCH_14_BIT15,
RESERVED_SWITCH_14_BIT16,
RESERVED_SWITCH_14_BIT17,
RESERVED_SWITCH_14_BIT18,
RESERVED_SWITCH_14_BIT19,
RESERVED_SWITCH_14_BIT20,
RESERVED_SWITCH_14_BIT21,
RESERVED_SWITCH_14_BIT22,
RESERVED_SWITCH_14_BIT23,
RESERVED_SWITCH_14_BIT24,
RESERVED_SWITCH_14_BIT25,
RESERVED_SWITCH_14_BIT26,
RESERVED_SWITCH_14_BIT27,
RESERVED_SWITCH_14_BIT28,
RESERVED_SWITCH_14_BIT29,
RESERVED_SWITCH_14_BIT30,
RESERVED_SWITCH_14_BIT31,
RESERVED_SWITCH_14_BIT32
Default Value: RESERVED_SWITCH_14_BIT1:0,
RESERVED_SWITCH_14_BIT2:0,
RESERVED_SWITCH_14_BIT3:0,
RESERVED_SWITCH_14_BIT4:0,
RESERVED_SWITCH_14_BIT5:0,
RESERVED_SWITCH_14_BIT6:0,
RESERVED_SWITCH_14_BIT7:0,
RESERVED_SWITCH_14_BIT8:0,
RESERVED_SWITCH_14_BIT9:0,
RESERVED_SWITCH_14_BIT10:0,
RESERVED_SWITCH_14_BIT11:0,
RESERVED_SWITCH_14_BIT12:0,
RESERVED_SWITCH_14_BIT13:0,
RESERVED_SWITCH_14_BIT14:0,
RESERVED_SWITCH_14_BIT15:0,
RESERVED_SWITCH_14_BIT16:0,
RESERVED_SWITCH_14_BIT17:0,
RESERVED_SWITCH_14_BIT18:0,
RESERVED_SWITCH_14_BIT19:0,
RESERVED_SWITCH_14_BIT20:0,
RESERVED_SWITCH_14_BIT21:0,
RESERVED_SWITCH_14_BIT22:0,
RESERVED_SWITCH_14_BIT23:0,
RESERVED_SWITCH_14_BIT24:0,
RESERVED_SWITCH_14_BIT25:0,
RESERVED_SWITCH_14_BIT26:0,
RESERVED_SWITCH_14_BIT27:0,
RESERVED_SWITCH_14_BIT28:0,
RESERVED_SWITCH_14_BIT29:0,
RESERVED_SWITCH_14_BIT30:0,
RESERVED_SWITCH_14_BIT31:0,
RESERVED_SWITCH_14_BIT32:0
CSFBS BSC690 SET WRFD- CS Meaning: SRB rate of CSFB UEs. Upon receiving a
RBRate 0 UFRC 140102 Fallback Relocation Request message from UEs during a
Guarant handover in the CSFB procedure, the RNC sets the
ee for uplink and downlink SRB rates to the value of this
LTE parameter and then changes these rates to 3.4 kbit/s
Emerge for subsequent CS calls. Upon receiving an RRC
ncy Connection Setup Request message carrying the IE
Calls "CSFB Indication" during a redirection in the CSFB
procedure, the RNC sets the uplink and downlink SRB
rates to the value of this parameter during the RRC
connection setup and then changes these rates to 3.4
kbit/s for subsequent CS calls. When SRBs are carried
over HSDPA and HSUPA, the minimum data rate can
reach 13.6 kbit/s. Therefore, this parameter
configuration is not applicable to this scenario.
GUI Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Unit: None
Actual Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Default Value: SRB_13.6K
CSFBS BSC691 SET WRFD- CS Meaning: SRB rate of CSFB UEs. Upon receiving a
RBRate 0 UFRC 140102 Fallback Relocation Request message from UEs during a
Guarant handover in the CSFB procedure, the RNC sets the
ee for uplink and downlink SRB rates to the value of this
LTE parameter and then changes these rates to 3.4 kbit/s
Emerge for subsequent CS calls. Upon receiving an RRC
ncy Connection Setup Request message carrying the IE
Calls "CSFB Indication" during a redirection in the CSFB
procedure, the RNC sets the uplink and downlink SRB
rates to the value of this parameter during the RRC
connection setup and then changes these rates to 3.4
kbit/s for subsequent CS calls. When SRBs are carried
over HSDPA and HSUPA, the minimum data rate can
reach 13.6 kbit/s. Therefore, this parameter
configuration is not applicable to this scenario.
GUI Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Unit: None
Actual Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Default Value: SRB_13.6K
20. PERFENH_OLPC_BLER_COEF_ADJUST:
Switch for adjusting the BLER coefficient specific to
CS services based on the best cell's uplink load status.
When this switch is turned on, the outer loop power
control algorithm uses the target BLER set by the
OMU board if the best cell's uplink load status is LDR
or OLC. If the status is neither LDR nor OLC, this
algorithm uses this target BLER after being divided by
five.
21.
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:
Whether to enable the function of delaying the
sending of an RRC_MEAS_CTRL message
containing AGPS information when an emergency call
is made. When this switch is turned on, the RNC
delays the sending of this message until the
emergency call is successfully set up. When this
switch is turned off, the RNC sends this message upon
receiving a LOCATION_REPORTING_CONTROL
message from the CN.
22.
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H: Whether to enable a UE having multiple RLSs to
use the value of "CQIReF" and the value of
"CQIFbCk" that are for UEs having only one RLS.
The two parameters can be set by running the "SET
UHSDPCCH" and "ADD UCELLHSDPCCH"
commands. When this switch is turned off, the UE
does not use the values of the two parameters that are
for UEs having only one RLS. When this switch is
turned on, the UE uses the values of the two
parameters that are for UEs having only one RLS.
23.
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH: Whether to enable a RELOCATION REQUIRED
message to contain the IE calculationTimeForCipher-
ing.
When this switch is turned on, static relocation request
messages contain the IE calculationTimeForCipher-
ing.
24.
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH:
Whether to trigger the DRD procedure and channel
switchover from E-DCH or HS-DSCH to DCH when
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned off,
the DRD procedure and channel switchover from E-
29.
PERFENH_L2U_CSFB_COMMCALL_SWITCH:
Whether to preferentially admit PS services of UEs
involved in LTE-to-UMTS CS fallback. When this
switch is turned on: If a UE involved in a LTE-to-
UMTS CS fallback is processing a non-real-time PS
service, the channel type and initial data rate for the
PS service are determined by the
"NRTInitRateforL2U" parameter in the "SET UFRC"
command during service admission. If the UE is
processing a real-time PS service, the UE follows the
standard access procedure. If the access attempt fails
and the "PreemptAlgoSwitch" in the "SET
UQUEUEPREEMPT" command is turned on, the UE
can preempt radio resources of existing UEs in the
UMTS cell. When this switch is turned off, the UE
follows the standard access procedure for the PS
service.
30.
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated single-
signaling R99 channel. When the switch specified by
this parameter is turned on, blind detection is enabled.
31.
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated AMR
R99 channel. When the switch specified by this
parameter is turned on, blind detection is enabled if
the HSDPA service has been set up and there are
signaling and AMR traffic carried on the R99 channel.
32.
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT:
Whether to allow R6 UEs to switch from HSUPA 10
ms to 2 ms TTI. When the switch is turned on, this
switching is not allowed for R6 UEs. When the switch
is turned off, this limit does not work.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.
GUI Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Unit: None
Actual Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
,
PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Default Value:
PERFENH_AMR_SPEC_BR_SWITCH:
1,PERFENH_AMR_TMPLT_SWITCH:
1,PERFENH_SRB_TMPLT_SWITCH:
1,PERFENH_OLPC_TMPLT_SWITCH:
1,PERFENH_AMR_SP_TMPLT_SWITCH:
1,PERFENH_INTRAFREQ_MC_TMPLT_SWITCH:
1,PERFENH_INTERRAT_PENALTY_50_SWITCH:
1,PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH
:0,PERFENH_HSUPA_TTI2_ENHANCE_SWITCH:
0,PERFENH_UU_P2D_CUC_OPT_SWITCH:
0,PERFENH_RL_RECFG_SIR_CONSIDER_SWITC
H:1,PERFENH_RRC_REDIR_PROTECT_SWITCH:
0,PERFENH_H2F_OPT_SWITCH:
20. PERFENH_OLPC_BLER_COEF_ADJUST:
Switch for adjusting the BLER coefficient specific to
CS services based on the best cell's uplink load status.
When this switch is turned on, the outer loop power
control algorithm uses the target BLER set by the
OMU board if the best cell's uplink load status is LDR
or OLC. If the status is neither LDR nor OLC, this
algorithm uses this target BLER after being divided by
five.
21.
PERFENH_EMG_AGPS_MC_DELAY_SWITCH:
Whether to enable the function of delaying the
sending of an RRC_MEAS_CTRL message
containing AGPS information when an emergency call
is made. When this switch is turned on, the RNC
delays the sending of this message until the
emergency call is successfully set up. When this
switch is turned off, the RNC sends this message upon
receiving a LOCATION_REPORTING_CONTROL
message from the CN.
22.
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H: Whether to enable a UE having multiple RLSs to
use the value of "CQIReF" and the value of
"CQIFbCk" that are for UEs having only one RLS.
The two parameters can be set by running the "SET
UHSDPCCH" and "ADD UCELLHSDPCCH"
commands. When this switch is turned off, the UE
does not use the values of the two parameters that are
for UEs having only one RLS. When this switch is
turned on, the UE uses the values of the two
parameters that are for UEs having only one RLS.
23.
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH: Whether to enable a RELOCATION REQUIRED
message to contain the IE calculationTimeForCipher-
ing.
When this switch is turned on, static relocation request
messages contain the IE calculationTimeForCipher-
ing.
24.
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH:
Whether to trigger the DRD procedure and channel
switchover from E-DCH or HS-DSCH to DCH when
messages transmitted over the Uu and Iub interfaces
do not arrive in time. When this switch is turned off,
the DRD procedure and channel switchover from E-
29.
PERFENH_L2U_CSFB_COMMCALL_SWITCH:
Whether to preferentially admit PS services of UEs
involved in LTE-to-UMTS CS fallback. When this
switch is turned on: If a UE involved in a LTE-to-
UMTS CS fallback is processing a non-real-time PS
service, the channel type and initial data rate for the
PS service are determined by the
"NRTInitRateforL2U" parameter in the "SET UFRC"
command during service admission. If the UE is
processing a real-time PS service, the UE follows the
standard access procedure. If the access attempt fails
and the "PreemptAlgoSwitch" in the "SET
UQUEUEPREEMPT" command is turned on, the UE
can preempt radio resources of existing UEs in the
UMTS cell. When this switch is turned off, the UE
follows the standard access procedure for the PS
service.
30.
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated single-
signaling R99 channel. When the switch specified by
this parameter is turned on, blind detection is enabled.
31.
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH: This parameter controls whether to enable
blind detection for the HSDPA user-associated AMR
R99 channel. When the switch specified by this
parameter is turned on, blind detection is enabled if
the HSDPA service has been set up and there are
signaling and AMR traffic carried on the R99 channel.
32.
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT:
Whether to allow R6 UEs to switch from HSUPA 10
ms to 2 ms TTI. When the switch is turned on, this
switching is not allowed for R6 UEs. When the switch
is turned off, this limit does not work.
This parameter is an advanced parameter. To modify
this parameter, contact Huawei Customer Service
Center for technical support.
GUI Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
, PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Unit: None
Actual Value Range:
PERFENH_AMR_SPEC_BR_SWITCH,
PERFENH_AMR_TMPLT_SWITCH,
PERFENH_SRB_TMPLT_SWITCH,
PERFENH_OLPC_TMPLT_SWITCH,
PERFENH_AMR_SP_TMPLT_SWITCH,
PERFENH_INTRAFREQ_MC_TMPLT_SWITCH,
PERFENH_INTERRAT_PENALTY_50_SWITCH,
PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH,
PERFENH_HSUPA_TTI2_ENHANCE_SWITCH,
PERFENH_UU_P2D_CUC_OPT_SWITCH,
PERFENH_RL_RECFG_SIR_CONSIDER_SWITCH
, PERFENH_RRC_REDIR_PROTECT_SWITCH,
PERFENH_H2F_OPT_SWITCH,
PERFENH_PSTRAFFIC_P2H_SWITCH,
PERFENH_VIP_USER_PCHR_MR_SWITCH,
PERFENH_TX_INTERRUPT_AFT_TRIG_SWITCH
,
PERFENH_CELL_HSUPA_CAP_CHANGE_OPT_S
WITCH,
PERFENH_HSUPA_TTI_RECFG_PROC_OPT_SWI
TCH,
PERFENH_DOWNLOAD_ENHANCE_SWITCH,
PERFENH_OLPC_BLER_COEF_ADJUST,
PERFENH_EMG_AGPS_MC_DELAY_SWITCH,
PERFENH_MULTI_RLS_CQI_PARA_OPT_SWITC
H,
PERFENH_RELOC_IE_CALCTIMEFORCIP_SWIT
CH,
PERFENH_IS_TIMEOUT_TRIG_DRD_SWITCH,
PERFENH_CELL_CACLOAD_BROADCAST_AM
END,
PERFENH_MBDR_TARCELLSEL_OPT_SWITCH,
PERFENH_RRC_DRD_PREADMISSION_SWITCH
,
PERFENH_RRC_WEAK_REDIR_SWITCH,
PERFENH_L2U_CSFB_COMMCALL_SWITCH,
PERFENH_DLBLINDDETECT_WHEN_ONLYSRB
ONDCH,
PERFENH_DLBLINDDETECT_WHEN_SRBAMR
ONDCH,
PERFENH_R6_HSUPA_TTI_10MSTO2MS_LIMIT
Default Value:
PERFENH_AMR_SPEC_BR_SWITCH:
1,PERFENH_AMR_TMPLT_SWITCH:
1,PERFENH_SRB_TMPLT_SWITCH:
1,PERFENH_OLPC_TMPLT_SWITCH:
1,PERFENH_AMR_SP_TMPLT_SWITCH:
1,PERFENH_INTRAFREQ_MC_TMPLT_SWITCH:
1,PERFENH_INTERRAT_PENALTY_50_SWITCH:
1,PERFENH_SRB_OVER_HSUPA_TTI10_SWITCH
:0,PERFENH_HSUPA_TTI2_ENHANCE_SWITCH:
0,PERFENH_UU_P2D_CUC_OPT_SWITCH:
0,PERFENH_RL_RECFG_SIR_CONSIDER_SWITC
H:1,PERFENH_RRC_REDIR_PROTECT_SWITCH:
0,PERFENH_H2F_OPT_SWITCH:
5. PERFENH_CE_RLS_ADM_OPT_SWITCH:
Whether to activate the RLS CE-based admission
optimization algorithm. When this switch is turned on,
a local cell group consumes an RLS CE if multiple
RLs occupy more than one local cell group, no matter
whether the UE uses the DCH or EDCH under a
NodeB. When this switch is turned off, all local cell
groups consume an RLS CE if multiple RLs occupy
more than one local cell group, no matter whether the
UE uses the DCH or EDCH under a NodeB.
6. PERFENH_DTCH_FACH_CONG_D2I_SWITCH:
When this switch is turned on and DTCHs are
congested, the RNC transits UEs that are in the
CELL_DCH state and do not process services to the
idle mode.This parameter is an advanced parameter.
To modify this parameter, contact Huawei Customer
Service Center for technical support.
7.
PERFENH_HSPA_CAPABLITY_NOT_BRD_SWIT
CH: Whether not to send HSPA capability indication
messages in SIB5.
8. PERFENH_SYSINFO_64FRAME_SWITCH:
Whether the RNC sends system information in a cell
at a 64-frame scheduling period to improve the
scheduling efficiency. When this switch is turned on,
the 64-frame-period scheduling is used. When this
switch is turned off, the 64-frame-period scheduling is
not used.
9. PERFENH_SIB7MIB_COMBINE_SWITCH:
Whether SIB7 and MIB are combined when the RNC
sends system information in a cell. When this switch
is turned on, SIB7 and MIB transmitted from the cell
are combined to one system information to save air
interface resources and improve scheduling efficiency.
When this switch is turned off, SIB7 and MIB
transmitted from the cell are two independent
messages.
10.
PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH:
Whether channel codes for HSPA services are pre-
allocated during cell setup. When this switch is turned
on, channel codes are allocated for the HS-SCCH, E-
AGCH, E-RGCH, and E-HICH immediately after the
cell is set up.When this switch is turned off, channel
codes are allocated only when HSPA services are
established.
11.
PERFENH_R99UPA_FAIRNESS_USR_SEL_SWIT
CH: Whether the R99 and HSUPA fairness algorithm
reduces the BE service rate of only the users whose
both uplink and downlink services are carried on R99
channels. When this switch is turned off, the algorithm
reduces the BE service rate of users whose uplink
services are carried on R99 channels and downlink
services are carried on R99 or HSDPA channels.
When this switch is turned on, the algorithm reduces
the BE service rate of only the users whose uplink and
downlink services are carried on R99 channels.
12.
PERFENH_HSPDSCH_SF_FORCEALLOC_SWITC
H:
PERFENH_HSPDSCH_SF_FORCEALLOC_SWITC
H: Whether the last vacant SF16 code is used as the
HS-PDSCH code when HSDPA has been activated.
When this switch is turned on and HSDPA has been
activated, no matter whether the last SF16 code is
vacant, the RNC repeatedly attempts to allocate this
code to the HS-PDSCH This improves the SF
spreading code usage. If the HS-PDSCH setup fails,
the RNC allocates the last vacant SF16 code to the
HS-PDSCH. When this switch is turned off and
HSDPA has been activated, the RNC allocates the last
vacant SF16 code first to the HS-PDSCH. This
improves the HSDPA activation efficiency.
13. PERFENH_OLC_REJ_F2DDCCC_SWITCH:
Whether to prohibit the DCCC-triggered state
transition from CELL_FACH to CELL_DCH (F2D
for short) when a cell is in the overload control (OLC)
state. When this switch is turned off, the RNC allows
the DCCC-triggered F2D state transition. When this
switch is turned on, the RNC does not support the
DCCC-triggered F2D state transition.
14. PERFENH_BGNOISE_QUICK_UPT_SWITCH:
Whether the background noise one-time quick update
algorithm is enabled. When this switch is turned on,
upon receiving the RTWP report, the RNC updates the
background noise value based on the common
measurement report if no UEs in the CELL_DCH
state are served by the cell. When this switch is turned
off, upon receiving the RTWP report, the RNC does
not update the background noise value based on the
common measurement report that is reported when the
Uu interface carries no load.
TCH:0,PERFENH_SYSINFO_64FRAME_SWITCH:
0,PERFENH_SIB7MIB_COMBINE_SWITCH:
0,PERFENH_HSPA_CODE_ALLOC_OPT_SWITC
H:
0,PERFENH_R99UPA_FAIRNESS_USR_SEL_SWI
TCH:
0,PERFENH_HSPDSCH_SF_FORCEALLOC_SWIT
CH:1,PERFENH_OLC_REJ_F2DDCCC_SWITCH:
0,PERFENH_BGNOISE_QUICK_UPT_SWITCH:
1,PERFENH_HRNTI_OPT_SWITCH:
1,PERFENH_FDPCH_FAULTY_RECOVER_SWIT
CH:
1,PERFENH_CCH_DLCODE_RESERV_SWITCH:
1,PERFENH_SMALL_RATE_PS_FORCE_ADM_S
WITCH:
1,PERFENH_HSDPA_DLPWR_ADM_OPT_SWITC
H:1,PERFENH_TD_ALIGN_RRC_EFFECT:
0,PERFENH_DEACELL_PFMRSV_SWITCH:
0,PERFENH_BGNOISE_UPT_OPTIMIZE_SWITCH
:
1,PERFENH_INTERRATHO_CAC_OPT_IN_LDR_
SWITCH:
0,PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SW
ITCH:0,PERFENH_CRNTI_OPT_SWITCH:
0,PERFENH_FACHUSER_NUM_CTRL_ENH_SWI
TCH:
1,PERFENH_RELOCINUSER_LDRPRE_OPT_SWI
TCH:1,PERFENH_SOFTERHO_CE_OPT_SWITCH:
1,PERFENH_LCGCE_RSRC_OPT_SWITCH:
1,PERFENH_QUEUE_CANCEL_RSRC_OPT_SWI
TCH:
1,PERFENH_SRB_OVER_HSDPA_DOFF_OPT_S
WITCH:1
5. PERFENH_CE_RLS_ADM_OPT_SWITCH:
Whether to activate the RLS CE-based admission
optimization algorithm. When this switch is turned on,
a local cell group consumes an RLS CE if multiple
RLs occupy more than one local cell group, no matter
whether the UE uses the DCH or EDCH under a
NodeB. When this switch is turned off, all local cell
groups consume an RLS CE if multiple RLs occupy
more than one local cell group, no matter whether the
UE uses the DCH or EDCH under a NodeB.
6. PERFENH_DTCH_FACH_CONG_D2I_SWITCH:
When this switch is turned on and DTCHs are
congested, the RNC transits UEs that are in the
CELL_DCH state and do not process services to the
idle mode.This parameter is an advanced parameter.
To modify this parameter, contact Huawei Customer
Service Center for technical support.
7.
PERFENH_HSPA_CAPABLITY_NOT_BRD_SWIT
CH: Whether not to send HSPA capability indication
messages in SIB5.
8. PERFENH_SYSINFO_64FRAME_SWITCH:
Whether the RNC sends system information in a cell
at a 64-frame scheduling period to improve the
scheduling efficiency. When this switch is turned on,
the 64-frame-period scheduling is used. When this
switch is turned off, the 64-frame-period scheduling is
not used.
9. PERFENH_SIB7MIB_COMBINE_SWITCH:
Whether SIB7 and MIB are combined when the RNC
sends system information in a cell. When this switch
is turned on, SIB7 and MIB transmitted from the cell
are combined to one system information to save air
interface resources and improve scheduling efficiency.
When this switch is turned off, SIB7 and MIB
transmitted from the cell are two independent
messages.
10.
PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH:
Whether channel codes for HSPA services are pre-
allocated during cell setup. When this switch is turned
on, channel codes are allocated for the HS-SCCH, E-
AGCH, E-RGCH, and E-HICH immediately after the
cell is set up.When this switch is turned off, channel
codes are allocated only when HSPA services are
established.
11.
PERFENH_R99UPA_FAIRNESS_USR_SEL_SWIT
CH: Whether the R99 and HSUPA fairness algorithm
reduces the BE service rate of only the users whose
both uplink and downlink services are carried on R99
channels. When this switch is turned off, the algorithm
reduces the BE service rate of users whose uplink
services are carried on R99 channels and downlink
services are carried on R99 or HSDPA channels.
When this switch is turned on, the algorithm reduces
the BE service rate of only the users whose uplink and
downlink services are carried on R99 channels.
12.
PERFENH_HSPDSCH_SF_FORCEALLOC_SWITC
H:
PERFENH_HSPDSCH_SF_FORCEALLOC_SWITC
H: Whether the last vacant SF16 code is used as the
HS-PDSCH code when HSDPA has been activated.
When this switch is turned on and HSDPA has been
activated, no matter whether the last SF16 code is
vacant, the RNC repeatedly attempts to allocate this
code to the HS-PDSCH This improves the SF
spreading code usage. If the HS-PDSCH setup fails,
the RNC allocates the last vacant SF16 code to the
HS-PDSCH. When this switch is turned off and
HSDPA has been activated, the RNC allocates the last
vacant SF16 code first to the HS-PDSCH. This
improves the HSDPA activation efficiency.
13. PERFENH_OLC_REJ_F2DDCCC_SWITCH:
Whether to prohibit the DCCC-triggered state
transition from CELL_FACH to CELL_DCH (F2D
for short) when a cell is in the overload control (OLC)
state. When this switch is turned off, the RNC allows
the DCCC-triggered F2D state transition. When this
switch is turned on, the RNC does not support the
DCCC-triggered F2D state transition.
14. PERFENH_BGNOISE_QUICK_UPT_SWITCH:
Whether the background noise one-time quick update
algorithm is enabled. When this switch is turned on,
upon receiving the RTWP report, the RNC updates the
background noise value based on the common
measurement report if no UEs in the CELL_DCH
state are served by the cell. When this switch is turned
off, upon receiving the RTWP report, the RNC does
not update the background noise value based on the
common measurement report that is reported when the
Uu interface carries no load.
Unit: None
Actual Value Range:
PERFENH_R99_BRDCSTHSPA_SWITCH,
PERFENH_MBDR_LOADCOND_OPT_SWITCH,
PERFENH_CALALGO_FOR_HSUPAENU_OPT_S
WITCH,
PERFENH_HSUPA_CCH_PREEMPT_USER,
PERFENH_CE_RLS_ADM_OPT_SWITCH,
PERFENH_DTCH_FACH_CONG_D2I_SWITCH,
PERFENH_HSPA_CAPABLITY_NOT_BRD_SWIT
CH, PERFENH_SYSINFO_64FRAME_SWITCH,
PERFENH_SIB7MIB_COMBINE_SWITCH,
PERFENH_HSPA_CODE_ALLOC_OPT_SWITCH,
PERFENH_R99UPA_FAIRNESS_USR_SEL_SWIT
CH,
PERFENH_HSPDSCH_SF_FORCEALLOC_SWITC
H, PERFENH_OLC_REJ_F2DDCCC_SWITCH,
PERFENH_BGNOISE_QUICK_UPT_SWITCH,
PERFENH_HRNTI_OPT_SWITCH,
PERFENH_FDPCH_FAULTY_RECOVER_SWITC
H, PERFENH_CCH_DLCODE_RESERV_SWITCH,
PERFENH_SMALL_RATE_PS_FORCE_ADM_SWI
TCH,
PERFENH_HSDPA_DLPWR_ADM_OPT_SWITCH
, PERFENH_TD_ALIGN_RRC_EFFECT,
PERFENH_DEACELL_PFMRSV_SWITCH,
PERFENH_BGNOISE_UPT_OPTIMIZE_SWITCH,
PERFENH_INTERRATHO_CAC_OPT_IN_LDR_S
WITCH,
PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SWIT
CH, PERFENH_CRNTI_OPT_SWITCH,
PERFENH_FACHUSER_NUM_CTRL_ENH_SWIT
CH,
PERFENH_RELOCINUSER_LDRPRE_OPT_SWIT
CH, PERFENH_SOFTERHO_CE_OPT_SWITCH,
PERFENH_LCGCE_RSRC_OPT_SWITCH,
PERFENH_QUEUE_CANCEL_RSRC_OPT_SWITC
H,
PERFENH_SRB_OVER_HSDPA_DOFF_OPT_SWI
TCH
Default Value:
PERFENH_R99_BRDCSTHSPA_SWITCH:
0,PERFENH_MBDR_LOADCOND_OPT_SWITCH:
0,PERFENH_CALALGO_FOR_HSUPAENU_OPT_
SWITCH:
0,PERFENH_HSUPA_CCH_PREEMPT_USER:
1,PERFENH_CE_RLS_ADM_OPT_SWITCH:
0,PERFENH_DTCH_FACH_CONG_D2I_SWITCH:
0,PERFENH_HSPA_CAPABLITY_NOT_BRD_SWI
TCH:0,PERFENH_SYSINFO_64FRAME_SWITCH:
0,PERFENH_SIB7MIB_COMBINE_SWITCH:
0,PERFENH_HSPA_CODE_ALLOC_OPT_SWITC
H:
0,PERFENH_R99UPA_FAIRNESS_USR_SEL_SWI
TCH:
0,PERFENH_HSPDSCH_SF_FORCEALLOC_SWIT
CH:1,PERFENH_OLC_REJ_F2DDCCC_SWITCH:
0,PERFENH_BGNOISE_QUICK_UPT_SWITCH:
1,PERFENH_HRNTI_OPT_SWITCH:
1,PERFENH_FDPCH_FAULTY_RECOVER_SWIT
CH:
1,PERFENH_CCH_DLCODE_RESERV_SWITCH:
1,PERFENH_SMALL_RATE_PS_FORCE_ADM_S
WITCH:
1,PERFENH_HSDPA_DLPWR_ADM_OPT_SWITC
H:1,PERFENH_TD_ALIGN_RRC_EFFECT:
0,PERFENH_DEACELL_PFMRSV_SWITCH:
0,PERFENH_BGNOISE_UPT_OPTIMIZE_SWITCH
:
1,PERFENH_INTERRATHO_CAC_OPT_IN_LDR_
SWITCH:
0,PERFENH_CSFBUSER_CAC_OPT_IN_LDR_SW
ITCH:0,PERFENH_CRNTI_OPT_SWITCH:
0,PERFENH_FACHUSER_NUM_CTRL_ENH_SWI
TCH:
1,PERFENH_RELOCINUSER_LDRPRE_OPT_SWI
TCH:1,PERFENH_SOFTERHO_CE_OPT_SWITCH:
1,PERFENH_LCGCE_RSRC_OPT_SWITCH:
1,PERFENH_QUEUE_CANCEL_RSRC_OPT_SWI
TCH:
1,PERFENH_SRB_OVER_HSDPA_DOFF_OPT_S
WITCH:1
RESERVED_SWITCH_16_BIT4,
RESERVED_SWITCH_16_BIT5,
RESERVED_SWITCH_16_BIT6,
RESERVED_SWITCH_16_BIT7,
RESERVED_SWITCH_16_BIT8,
RESERVED_SWITCH_16_BIT9,
RESERVED_SWITCH_16_BIT10,
RESERVED_SWITCH_16_BIT11,
RESERVED_SWITCH_16_BIT12,
RESERVED_SWITCH_16_BIT13,
RESERVED_SWITCH_16_BIT14,
RESERVED_SWITCH_16_BIT15,
RESERVED_SWITCH_16_BIT16,
RESERVED_SWITCH_16_BIT17,
RESERVED_SWITCH_16_BIT18,
RESERVED_SWITCH_16_BIT19,
RESERVED_SWITCH_16_BIT20,
RESERVED_SWITCH_16_BIT21,
RESERVED_SWITCH_16_BIT22,
RESERVED_SWITCH_16_BIT23,
RESERVED_SWITCH_16_BIT24,
RESERVED_SWITCH_16_BIT25,
RESERVED_SWITCH_16_BIT26,
RESERVED_SWITCH_16_BIT27,
RESERVED_SWITCH_16_BIT28,
RESERVED_SWITCH_16_BIT29,
RESERVED_SWITCH_16_BIT30,
RESERVED_SWITCH_16_BIT31,
RESERVED_SWITCH_16_BIT32
Default Value: RESERVED_SWITCH_16_BIT1:0,
RESERVED_SWITCH_16_BIT2:0,
RESERVED_SWITCH_16_BIT3:0,
RESERVED_SWITCH_16_BIT4:0,
RESERVED_SWITCH_16_BIT5:0,
RESERVED_SWITCH_16_BIT6:0,
RESERVED_SWITCH_16_BIT7:0,
RESERVED_SWITCH_16_BIT8:0,
RESERVED_SWITCH_16_BIT9:0,
RESERVED_SWITCH_16_BIT10:0,
RESERVED_SWITCH_16_BIT11:0,
RESERVED_SWITCH_16_BIT12:0,
RESERVED_SWITCH_16_BIT13:0,
RESERVED_SWITCH_16_BIT14:0,
RESERVED_SWITCH_16_BIT15:0,
RESERVED_SWITCH_16_BIT16:0,
RESERVED_SWITCH_16_BIT17:0,
RESERVED_SWITCH_16_BIT18:0,
RESERVED_SWITCH_16_BIT19:0,
RESERVED_SWITCH_16_BIT20:0,
RESERVED_SWITCH_16_BIT21:0,
RESERVED_SWITCH_16_BIT22:0,
RESERVED_SWITCH_16_BIT23:0,
RESERVED_SWITCH_16_BIT24:0,
RESERVED_SWITCH_16_BIT25:0,
RESERVED_SWITCH_16_BIT26:0,
RESERVED_SWITCH_16_BIT27:0,
RESERVED_SWITCH_16_BIT28:0,
RESERVED_SWITCH_16_BIT29:0,
RESERVED_SWITCH_16_BIT30:0,
RESERVED_SWITCH_16_BIT31:0,
RESERVED_SWITCH_16_BIT32:0
RESERVED_SWITCH_16_BIT4,
RESERVED_SWITCH_16_BIT5,
RESERVED_SWITCH_16_BIT6,
RESERVED_SWITCH_16_BIT7,
RESERVED_SWITCH_16_BIT8,
RESERVED_SWITCH_16_BIT9,
RESERVED_SWITCH_16_BIT10,
RESERVED_SWITCH_16_BIT11,
RESERVED_SWITCH_16_BIT12,
RESERVED_SWITCH_16_BIT13,
RESERVED_SWITCH_16_BIT14,
RESERVED_SWITCH_16_BIT15,
RESERVED_SWITCH_16_BIT16,
RESERVED_SWITCH_16_BIT17,
RESERVED_SWITCH_16_BIT18,
RESERVED_SWITCH_16_BIT19,
RESERVED_SWITCH_16_BIT20,
RESERVED_SWITCH_16_BIT21,
RESERVED_SWITCH_16_BIT22,
RESERVED_SWITCH_16_BIT23,
RESERVED_SWITCH_16_BIT24,
RESERVED_SWITCH_16_BIT25,
RESERVED_SWITCH_16_BIT26,
RESERVED_SWITCH_16_BIT27,
RESERVED_SWITCH_16_BIT28,
RESERVED_SWITCH_16_BIT29,
RESERVED_SWITCH_16_BIT30,
RESERVED_SWITCH_16_BIT31,
RESERVED_SWITCH_16_BIT32
Default Value: RESERVED_SWITCH_16_BIT1:0,
RESERVED_SWITCH_16_BIT2:0,
RESERVED_SWITCH_16_BIT3:0,
RESERVED_SWITCH_16_BIT4:0,
RESERVED_SWITCH_16_BIT5:0,
RESERVED_SWITCH_16_BIT6:0,
RESERVED_SWITCH_16_BIT7:0,
RESERVED_SWITCH_16_BIT8:0,
RESERVED_SWITCH_16_BIT9:0,
RESERVED_SWITCH_16_BIT10:0,
RESERVED_SWITCH_16_BIT11:0,
RESERVED_SWITCH_16_BIT12:0,
RESERVED_SWITCH_16_BIT13:0,
RESERVED_SWITCH_16_BIT14:0,
RESERVED_SWITCH_16_BIT15:0,
RESERVED_SWITCH_16_BIT16:0,
RESERVED_SWITCH_16_BIT17:0,
RESERVED_SWITCH_16_BIT18:0,
RESERVED_SWITCH_16_BIT19:0,
RESERVED_SWITCH_16_BIT20:0,
RESERVED_SWITCH_16_BIT21:0,
RESERVED_SWITCH_16_BIT22:0,
RESERVED_SWITCH_16_BIT23:0,
RESERVED_SWITCH_16_BIT24:0,
RESERVED_SWITCH_16_BIT25:0,
RESERVED_SWITCH_16_BIT26:0,
RESERVED_SWITCH_16_BIT27:0,
RESERVED_SWITCH_16_BIT28:0,
RESERVED_SWITCH_16_BIT29:0,
RESERVED_SWITCH_16_BIT30:0,
RESERVED_SWITCH_16_BIT31:0,
RESERVED_SWITCH_16_BIT32:0
Intra 4)ROUT_IDT_BY_ROUTING_PARA_SWITCH
RNC Whether to enable the RNC to select a CN node based
Cell on the "Routing parameter" IE included in the
Update INITIAL DIRECT TRANSFER message exchanged
Inter every time a CS service is set up for CS+PS combined
RNC services when Iu Flex is applied.
Cell 1: This switch is turned on. The RNC selects a CN
Update node in the preceding way.
Encrypti 0: This switch is turned off. The RNC selects a CN
on node based on the "Routing parameter" IE included in
Combin the INITIAL DIRECT TRANSFER message
ation of exchanged the first time a CS service is set up for CS
One CS +PS combined services if Iu Flex is applied.
Service 5)COUNT_CS_REC_IU_REL_CMD_SWITCH
and
Whether to increase the values of specific counters by
Three
one when the RNC receives an IU RELEASE
PS
COMMAND message from the CS domain and an
Services
inter-RAT handover for CS+PS combined services is
in progress. These counters are VS.CS.Erlang.RNC,
VS.AMR.Erlang.BestCell, VS.RB.AMR.UL.4.75, and
VS.RB.AMR.DL.4.75.
1: This switch is turned on. The values of the
previously mentioned counters are increased by one in
the preceding scenario.
0: This switch is turned off. The values of these
counters are increased by one when the RNC receives
an IU RELEASE COMMAND message from the CS
and PS domains of the CN and an inter-RAT handover
for CS+PS combined services is in progress.
6)SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH
Whether to refuse to send a UE CAPABILITY
ENQUIRY message to a UE that is not in the
CELL_DCH state and is performing an incoming
SRNS relocation.
1: This switch is turned on. The RNC does not send
the message to the UE.
0: This switch is turned off. The RNC sends the
message to the UE.
7)REL_IUR_CCH_BEFORE_DSCR_SWITCH
Whether to immediately release the data of a UE from
an Iur common channel if the UE initiates the DSCR
process.
1: This switch is turned on. The RNC immediately
releases the data of a UE from an Iur common channel
if the UE initiates the DSCR process.
16)PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH
Whether to query the UE capability at a delayed time
in the case of a PS HO-based CSFB.
1: This switch is turned on. The RNC queries the UE
capability at a delayed time in the case of a PS HO-
based CSFB. That is, the RNC queries the UE
capability after the CS service is set up.
0: This switch is turned off. The RNC queries the UE
capability during the PS HO-based CSFB.
17)PAGING_OM_OPTIMIZE_SWITCH(Paging
Optimization Switch)
Whether the RNC records the international mobile
subscriber identity (IMSI) of a UE in the idle mode
when the UE does not respond to a CS paging in time
and the cause value carried in the CS paging message
is Terminating Conversational Call, Terminating Low
Priority Signalling, or Terminating Streaming Call.
1: This switch is turned on. The RNC records the
IMSI of the UE in the preceding scenario.
0: This switch is turned off. The RNC does not record
the IMSI of the UE in the preceding scenario.
18)DEACTIVE_CELLHSPA_H2F_SWITCH(H2F
Control Switch After HSPA Deactivated)
Whether to transition UEs processing HSPA services
to the CELL_FACH state or release these UEs after
the HSPA function is deactivated in a cell.
1: This switch is turned on. UEs processing HSPA
services transition to the CELL_FACH state after the
HSPA function is deactivated in the cell.
0: This switch is turned off. UEs processing HSPA
services are released after the HSPA function is
deactivated in the cell.
19)OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH
Whether the RNC sends a UE CAPABILITY
ENQUIRY message to a UE in the CELL_DCH state
during an incoming relocation procedure.
1: This switch is turned on. Under this circumstance,
the RNC does not send a UE CAPABILITY
ENQUIRY message to a UE in the CELL_DCH state
during an incoming relocation procedure.
0: This switch is turned off. Under this circumstance,
the RNC sends a UE CAPABILITY ENQUIRY
message to a UE in the CELL_DCH state in the
preceding scenario.
20)RAB_SETUP_CNT_CORRECT_SWITCH
Whether to measure the number of RAB setup
attempts when the cross processing of RAB setup and
cell update fails or the radio link reestablishment
triggered by RAB setup fails.
1: This switch is turned on. The number of RAB setup
attempts is measured.
0: This switch is turned off. The number of RAB setup
attempts is not measured.
21)FACH_DCCH_RRC_REL_NO_RSP_DELAY_US
E_URNTI
Whether to delay the assignment of the URNTI from
one UE to another when the timer for the UE to wait
for a response message from the RNC expires after the
UE in the CELL_FACH state sends an RRC
CONNECTION RELEASE message on the DCCH.
This switch prevents the assignment of the URNTI
from one UE to another to avoid URNTI conflicts.
This switch is turned on by default.
1: This switch is turned on. The RNC delays the
assignment of the URNTI from the current UE to
another UE.
0: This switch is turned off. The RNC immediately
assigns the URNTI from the current UE to another
UE.
22)FACH_CCCH_RRC_REL_NO_RSP_DELAY_US
E_URNTI
Whether to delay the assignment of the URNTI from
one UE to another when the timer for the UE to wait
for a response message from the RNC expires after the
UE in the CELL_FACH state sends an RRC
CONNECTION RELEASE message on the CCCH.
This switch prevents the assignment of the URNTI
from one UE to another to avoid URNTI conflicts.
This switch is turned off by default.
1: This switch is turned on. The RNC delays the
assignment of the URNTI from the current UE to
another UE.
0: This switch is turned off. The RNC immediately
assigns the URNTI from the current UE to another
UE.
23)RB_SETUP_RLC_INFO_OPT_SWITCH:
Whether the RNC sets the "RLC info" IE of the "RB
information to setup" IE contained in the second and
third RB subflows to "Same as RB:0xM" if the RLC
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH,
REL_IUR_CCH_BEFORE_DSCR_SWITCH,
RELOC_CIPHER_PENDING_COMPATI_SWITCH,
COUNT_SPECIAL_RAB_ATT_SWITCH,
COUNT_STATE_CHG_BY_RAB_SWITCH,
DELAY_SEND_MEACTRL_SWITCH,
TAKE_ACTIVE_TIME_DRD_SWITCH,
CS_DISCONNECT_OPT_SWITCH,
NON_DCCC_RBRECFG_RL_REEST_SWITCH,
SMC_RL_REEST_SWITCH,
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH,
PAGING_OM_OPTIMIZE_SWITCH,
DEACTIVE_CELLHSPA_H2F_SWITCH,
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH,
RAB_SETUP_CNT_CORRECT_SWITCH,
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI, RB_SETUP_RLC_INFO_OPT_SWITCH,
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITC
H,
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWI
TCH,
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWIT
CH,
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITC
H,
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH,
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWI
TCH,
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWI
TCH, CSFB_UE_DELAY_RAU_SWITCH,
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH
Unit: None
Actual Value Range:
CONVERT_RELOC_FAIL_CAUSE_SWITCH,
DEAL_SRNS_CONTEXT_REQ_FIRST_SWITCH,
DELAY_DRNC_CODE_REL_SWITCH,
ROUT_IDT_BY_ROUTING_PARA_SWITCH,
COUNT_CS_REC_IU_REL_CMD_SWITCH,
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH,
REL_IUR_CCH_BEFORE_DSCR_SWITCH,
RELOC_CIPHER_PENDING_COMPATI_SWITCH,
COUNT_SPECIAL_RAB_ATT_SWITCH,
COUNT_STATE_CHG_BY_RAB_SWITCH,
DELAY_SEND_MEACTRL_SWITCH,
TAKE_ACTIVE_TIME_DRD_SWITCH,
CS_DISCONNECT_OPT_SWITCH,
NON_DCCC_RBRECFG_RL_REEST_SWITCH,
SMC_RL_REEST_SWITCH,
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH,
PAGING_OM_OPTIMIZE_SWITCH,
DEACTIVE_CELLHSPA_H2F_SWITCH,
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH,
RAB_SETUP_CNT_CORRECT_SWITCH,
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
RB_SETUP_RLC_INFO_OPT_SWITCH,
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITC
H,
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWI
TCH,
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWIT
CH,
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITC
H,
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH,
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWI
TCH,
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWI
TCH,
CSFB_UE_DELAY_RAU_SWITCH,
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH
Default Value:
CONVERT_RELOC_FAIL_CAUSE_SWITCH:
0,DEAL_SRNS_CONTEXT_REQ_FIRST_SWITCH:
0,DELAY_DRNC_CODE_REL_SWITCH:
0,ROUT_IDT_BY_ROUTING_PARA_SWITCH:
0,COUNT_CS_REC_IU_REL_CMD_SWITCH:
0,SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH:
0,REL_IUR_CCH_BEFORE_DSCR_SWITCH:
0,RELOC_CIPHER_PENDING_COMPATI_SWITC
H:0,COUNT_SPECIAL_RAB_ATT_SWITCH:
0 ,COUNT_STATE_CHG_BY_RAB_SWITCH:
0 ,DELAY_SEND_MEACTRL_SWITCH:
Intra 4)ROUT_IDT_BY_ROUTING_PARA_SWITCH
RNC Whether to enable the RNC to select a CN node based
Cell on the "Routing parameter" IE included in the
Update INITIAL DIRECT TRANSFER message exchanged
Inter every time a CS service is set up for CS+PS combined
RNC services when Iu Flex is applied.
Cell 1: This switch is turned on. The RNC selects a CN
Update node in the preceding way.
Encrypti 0: This switch is turned off. The RNC selects a CN
on node based on the "Routing parameter" IE included in
Combin the INITIAL DIRECT TRANSFER message
ation of exchanged the first time a CS service is set up for CS
One CS +PS combined services if Iu Flex is applied.
Service 5)COUNT_CS_REC_IU_REL_CMD_SWITCH
and
Whether to increase the values of specific counters by
Three
one when the RNC receives an IU RELEASE
PS
COMMAND message from the CS domain and an
Services
inter-RAT handover for CS+PS combined services is
in progress. These counters are VS.CS.Erlang.RNC,
VS.AMR.Erlang.BestCell, VS.RB.AMR.UL.4.75, and
VS.RB.AMR.DL.4.75.
1: This switch is turned on. The values of the
previously mentioned counters are increased by one in
the preceding scenario.
0: This switch is turned off. The values of these
counters are increased by one when the RNC receives
an IU RELEASE COMMAND message from the CS
and PS domains of the CN and an inter-RAT handover
for CS+PS combined services is in progress.
6)SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH
Whether to refuse to send a UE CAPABILITY
ENQUIRY message to a UE that is not in the
CELL_DCH state and is performing an incoming
SRNS relocation.
1: This switch is turned on. The RNC does not send
the message to the UE.
0: This switch is turned off. The RNC sends the
message to the UE.
7)REL_IUR_CCH_BEFORE_DSCR_SWITCH
Whether to immediately release the data of a UE from
an Iur common channel if the UE initiates the DSCR
process.
1: This switch is turned on. The RNC immediately
releases the data of a UE from an Iur common channel
if the UE initiates the DSCR process.
16)PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH
Whether to query the UE capability at a delayed time
in the case of a PS HO-based CSFB.
1: This switch is turned on. The RNC queries the UE
capability at a delayed time in the case of a PS HO-
based CSFB. That is, the RNC queries the UE
capability after the CS service is set up.
0: This switch is turned off. The RNC queries the UE
capability during the PS HO-based CSFB.
17)PAGING_OM_OPTIMIZE_SWITCH(Paging
Optimization Switch)
Whether the RNC records the international mobile
subscriber identity (IMSI) of a UE in the idle mode
when the UE does not respond to a CS paging in time
and the cause value carried in the CS paging message
is Terminating Conversational Call, Terminating Low
Priority Signalling, or Terminating Streaming Call.
1: This switch is turned on. The RNC records the
IMSI of the UE in the preceding scenario.
0: This switch is turned off. The RNC does not record
the IMSI of the UE in the preceding scenario.
18)DEACTIVE_CELLHSPA_H2F_SWITCH(H2F
Control Switch After HSPA Deactivated)
Whether to transition UEs processing HSPA services
to the CELL_FACH state or release these UEs after
the HSPA function is deactivated in a cell.
1: This switch is turned on. UEs processing HSPA
services transition to the CELL_FACH state after the
HSPA function is deactivated in the cell.
0: This switch is turned off. UEs processing HSPA
services are released after the HSPA function is
deactivated in the cell.
19)OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH
Whether the RNC sends a UE CAPABILITY
ENQUIRY message to a UE in the CELL_DCH state
during an incoming relocation procedure.
1: This switch is turned on. Under this circumstance,
the RNC does not send a UE CAPABILITY
ENQUIRY message to a UE in the CELL_DCH state
during an incoming relocation procedure.
0: This switch is turned off. Under this circumstance,
the RNC sends a UE CAPABILITY ENQUIRY
message to a UE in the CELL_DCH state in the
preceding scenario.
20)RAB_SETUP_CNT_CORRECT_SWITCH
Whether to measure the number of RAB setup
attempts when the cross processing of RAB setup and
cell update fails or the radio link reestablishment
triggered by RAB setup fails.
1: This switch is turned on. The number of RAB setup
attempts is measured.
0: This switch is turned off. The number of RAB setup
attempts is not measured.
21)FACH_DCCH_RRC_REL_NO_RSP_DELAY_US
E_URNTI
Whether to delay the assignment of the URNTI from
one UE to another when the timer for the UE to wait
for a response message from the RNC expires after the
UE in the CELL_FACH state sends an RRC
CONNECTION RELEASE message on the DCCH.
This switch prevents the assignment of the URNTI
from one UE to another to avoid URNTI conflicts.
This switch is turned on by default.
1: This switch is turned on. The RNC delays the
assignment of the URNTI from the current UE to
another UE.
0: This switch is turned off. The RNC immediately
assigns the URNTI from the current UE to another
UE.
22)FACH_CCCH_RRC_REL_NO_RSP_DELAY_US
E_URNTI
Whether to delay the assignment of the URNTI from
one UE to another when the timer for the UE to wait
for a response message from the RNC expires after the
UE in the CELL_FACH state sends an RRC
CONNECTION RELEASE message on the CCCH.
This switch prevents the assignment of the URNTI
from one UE to another to avoid URNTI conflicts.
This switch is turned off by default.
1: This switch is turned on. The RNC delays the
assignment of the URNTI from the current UE to
another UE.
0: This switch is turned off. The RNC immediately
assigns the URNTI from the current UE to another
UE.
23)RB_SETUP_RLC_INFO_OPT_SWITCH:
Whether the RNC sets the "RLC info" IE of the "RB
information to setup" IE contained in the second and
third RB subflows to "Same as RB:0xM" if the RLC
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH,
REL_IUR_CCH_BEFORE_DSCR_SWITCH,
RELOC_CIPHER_PENDING_COMPATI_SWITCH,
COUNT_SPECIAL_RAB_ATT_SWITCH,
COUNT_STATE_CHG_BY_RAB_SWITCH,
DELAY_SEND_MEACTRL_SWITCH,
TAKE_ACTIVE_TIME_DRD_SWITCH,
CS_DISCONNECT_OPT_SWITCH,
NON_DCCC_RBRECFG_RL_REEST_SWITCH,
SMC_RL_REEST_SWITCH,
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH,
PAGING_OM_OPTIMIZE_SWITCH,
DEACTIVE_CELLHSPA_H2F_SWITCH,
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH,
RAB_SETUP_CNT_CORRECT_SWITCH,
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI, RB_SETUP_RLC_INFO_OPT_SWITCH,
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITC
H,
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWI
TCH,
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWIT
CH,
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITC
H,
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH,
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWI
TCH,
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWI
TCH, CSFB_UE_DELAY_RAU_SWITCH,
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH
Unit: None
Actual Value Range:
CONVERT_RELOC_FAIL_CAUSE_SWITCH,
DEAL_SRNS_CONTEXT_REQ_FIRST_SWITCH,
DELAY_DRNC_CODE_REL_SWITCH,
ROUT_IDT_BY_ROUTING_PARA_SWITCH,
COUNT_CS_REC_IU_REL_CMD_SWITCH,
SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH,
REL_IUR_CCH_BEFORE_DSCR_SWITCH,
RELOC_CIPHER_PENDING_COMPATI_SWITCH,
COUNT_SPECIAL_RAB_ATT_SWITCH,
COUNT_STATE_CHG_BY_RAB_SWITCH,
DELAY_SEND_MEACTRL_SWITCH,
TAKE_ACTIVE_TIME_DRD_SWITCH,
CS_DISCONNECT_OPT_SWITCH,
NON_DCCC_RBRECFG_RL_REEST_SWITCH,
SMC_RL_REEST_SWITCH,
PSHO_CSFB_UE_CAP_ENQ_DELAY_SWITCH,
PAGING_OM_OPTIMIZE_SWITCH,
DEACTIVE_CELLHSPA_H2F_SWITCH,
OMIT_UE_CAP_ENQ_RELOC_DCH_SWITCH,
RAB_SETUP_CNT_CORRECT_SWITCH,
FACH_DCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
FACH_CCCH_RRC_REL_NO_RSP_DELAY_USE_
URNTI,
RB_SETUP_RLC_INFO_OPT_SWITCH,
DCH_DISCARD_CELL_RESEL_CU_MSG_SWITC
H,
SYS_INIT_SPU_STATE_BROADCAST_OPT_SWI
TCH,
RB_RECFG_F2D_ISR_IC_FAIL_RRC_REL_SWIT
CH,
PTT_RAB_SETUP_ATT_CNT_CORRECT_SWITC
H,
P2D_DRD_FAIL_BACK_RESEL_CELL_SWITCH,
TRB_RST_CU_NOT_REEST_UM_RLC_TRB_SWI
TCH,
ONE_CNNODE_SCCP_CONG_SEL_OTHER_SWI
TCH,
CSFB_UE_DELAY_RAU_SWITCH,
CSFB_UE_CS_IMEI_QUERY_DISABLE_SWITCH
Default Value:
CONVERT_RELOC_FAIL_CAUSE_SWITCH:
0,DEAL_SRNS_CONTEXT_REQ_FIRST_SWITCH:
0,DELAY_DRNC_CODE_REL_SWITCH:
0,ROUT_IDT_BY_ROUTING_PARA_SWITCH:
0,COUNT_CS_REC_IU_REL_CMD_SWITCH:
0,SEND_UE_CAP_ENQ_RELOC_CCH_SWITCH:
0,REL_IUR_CCH_BEFORE_DSCR_SWITCH:
0,RELOC_CIPHER_PENDING_COMPATI_SWITC
H:0,COUNT_SPECIAL_RAB_ATT_SWITCH:
0 ,COUNT_STATE_CHG_BY_RAB_SWITCH:
0 ,DELAY_SEND_MEACTRL_SWITCH:
DR_INTER_RAT_CSPS_MULTI_RAB_DRD_SWIT
CH
Default Value: DR_RRC_DRD_SWITCH:
1,DR_RAB_SING_DRD_SWITCH:
1,DR_RAB_COMB_DRD_SWITCH:
0,DR_INTER_RAT_DRD_SWITCH:
1,DR_RAB_COMB_DRD_SWITCH_FOR_CSUSER
:
1,DR_INTER_RAT_CSPS_MULTI_RAB_DRD_SWI
TCH:0
DR_INTER_RAT_CSPS_MULTI_RAB_DRD_SWIT
CH
Default Value: DR_RRC_DRD_SWITCH:
1,DR_RAB_SING_DRD_SWITCH:
1,DR_RAB_COMB_DRD_SWITCH:
0,DR_INTER_RAT_DRD_SWITCH:
1,DR_RAB_COMB_DRD_SWITCH_FOR_CSUSER
:
1,DR_INTER_RAT_CSPS_MULTI_RAB_DRD_SWI
TCH:0
CSFBU BSC690 SET WRFD- Mobility Meaning: Value of the timer for delayed routing area
eDelayR 0 USTAT 020126 Between update for CSFB UEs.
AUTime ETIME UMTS GUI Value Range: 1~10
r R and LTE
Phase 1 Unit: s
Actual Value Range: 1~10
Default Value: 5
CSFBU BSC691 SET WRFD- Mobility Meaning: Value of the timer for delayed routing area
eDelayR 0 USTAT 020126 Between update for CSFB UEs.
AUTime ETIME UMTS GUI Value Range: 1~10
r R and LTE
Phase 1 Unit: s
Actual Value Range: 1~10
Default Value: 5
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH,
CU_OVERLAP_DSCR_SWITCH,
TRB_RST_DSCR_SWITCH,
RNC_FD_SCRI_FORCE_REL_SWITCH,
FP_IUUP_TRACE_SWITCH,
RNC_PCHR_OUTPUT_CTRL_SWITCH,
DTMF_SWITCH,
FAST_CS_FB_BASEDON_RIM_SWITCH,
L2U_SRVCC_WITH_PS_HO_SWITCH,
ULTRA_FLASH_CSFB_SWITCH,
RNC_PS_QUERY_UE_IMEISV_SWITCH
Unit: None
Actual Value Range:
LOAD_IRAT_HO_RNC_FILL_TL,
SEND_IDT_JUDGE_IU_RESET,
RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWITC
H, RNC_CS_QUERY_UE_IMEI_SWITCH,
RNC_PS_QUERY_UE_IMEI_SWITCH,
FACH_DTCH_CONGEST_P2D,
RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWITC
H, PS_NOTIFYCN_NOTDOWNSIZE_SWITCH,
ASU_RSP_TIMEOUT_HANDLE_SWITCH,
RB_RECFG_USER_INACT_SWITCH,
RRC_SCRI_NORM_REL_SWITCH,
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH,
CU_OVERLAP_DSCR_SWITCH,
TRB_RST_DSCR_SWITCH,
RNC_FD_SCRI_FORCE_REL_SWITCH,
FP_IUUP_TRACE_SWITCH,
RNC_PCHR_OUTPUT_CTRL_SWITCH,
DTMF_SWITCH,
FAST_CS_FB_BASEDON_RIM_SWITCH,
L2U_SRVCC_WITH_PS_HO_SWITCH,
ULTRA_FLASH_CSFB_SWITCH,
RNC_PS_QUERY_UE_IMEISV_SWITCH
Default Value: LOAD_IRAT_HO_RNC_FILL_TL:
0,SEND_IDT_JUDGE_IU_RESET:
0,RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWI
TCH:1,RNC_CS_QUERY_UE_IMEI_SWITCH:
0,RNC_PS_QUERY_UE_IMEI_SWITCH:
0,FACH_DTCH_CONGEST_P2D:
0,RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWIT
CH:0,PS_NOTIFYCN_NOTDOWNSIZE_SWITCH:
0,ASU_RSP_TIMEOUT_HANDLE_SWITCH:
0,RB_RECFG_USER_INACT_SWITCH:
0,RRC_SCRI_NORM_REL_SWITCH:
0,CELLUPT_RLFAILURE_SRBREESTAB_SWITC
H:0,CU_OVERLAP_DSCR_SWITCH:
0,TRB_RST_DSCR_SWITCH:
0,RNC_FD_SCRI_FORCE_REL_SWITCH:
0,FP_IUUP_TRACE_SWITCH:
1,RNC_PCHR_OUTPUT_CTRL_SWITCH:
1,DTMF_SWITCH:
1,FAST_CS_FB_BASEDON_RIM_SWITCH:
0,L2U_SRVCC_WITH_PS_HO_SWITCH:
0,ULTRA_FLASH_CSFB_SWITCH:
0,RNC_PS_QUERY_UE_IMEISV_SWITCH:0
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH,
CU_OVERLAP_DSCR_SWITCH,
TRB_RST_DSCR_SWITCH,
RNC_FD_SCRI_FORCE_REL_SWITCH,
FP_IUUP_TRACE_SWITCH,
RNC_PCHR_OUTPUT_CTRL_SWITCH,
DTMF_SWITCH,
FAST_CS_FB_BASEDON_RIM_SWITCH,
L2U_SRVCC_WITH_PS_HO_SWITCH,
ULTRA_FLASH_CSFB_SWITCH,
RNC_PS_QUERY_UE_IMEISV_SWITCH
Unit: None
Actual Value Range:
LOAD_IRAT_HO_RNC_FILL_TL,
SEND_IDT_JUDGE_IU_RESET,
RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWITC
H, RNC_CS_QUERY_UE_IMEI_SWITCH,
RNC_PS_QUERY_UE_IMEI_SWITCH,
FACH_DTCH_CONGEST_P2D,
RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWITC
H, PS_NOTIFYCN_NOTDOWNSIZE_SWITCH,
ASU_RSP_TIMEOUT_HANDLE_SWITCH,
RB_RECFG_USER_INACT_SWITCH,
RRC_SCRI_NORM_REL_SWITCH,
CELLUPT_RLFAILURE_SRBREESTAB_SWITCH,
CU_OVERLAP_DSCR_SWITCH,
TRB_RST_DSCR_SWITCH,
RNC_FD_SCRI_FORCE_REL_SWITCH,
FP_IUUP_TRACE_SWITCH,
RNC_PCHR_OUTPUT_CTRL_SWITCH,
DTMF_SWITCH,
FAST_CS_FB_BASEDON_RIM_SWITCH,
L2U_SRVCC_WITH_PS_HO_SWITCH,
ULTRA_FLASH_CSFB_SWITCH,
RNC_PS_QUERY_UE_IMEISV_SWITCH
Default Value: LOAD_IRAT_HO_RNC_FILL_TL:
0,SEND_IDT_JUDGE_IU_RESET:
0,RNC_RBRECFG_DRD_FAIL_ROLLBACK_SWI
TCH:1,RNC_CS_QUERY_UE_IMEI_SWITCH:
0,RNC_PS_QUERY_UE_IMEI_SWITCH:
0,FACH_DTCH_CONGEST_P2D:
0,RNC_RBSETUP_DRD_FAIL_ROLLBACK_SWIT
CH:0,PS_NOTIFYCN_NOTDOWNSIZE_SWITCH:
0,ASU_RSP_TIMEOUT_HANDLE_SWITCH:
0,RB_RECFG_USER_INACT_SWITCH:
0,RRC_SCRI_NORM_REL_SWITCH:
0,CELLUPT_RLFAILURE_SRBREESTAB_SWITC
H:0,CU_OVERLAP_DSCR_SWITCH:
0,TRB_RST_DSCR_SWITCH:
0,RNC_FD_SCRI_FORCE_REL_SWITCH:
0,FP_IUUP_TRACE_SWITCH:
1,RNC_PCHR_OUTPUT_CTRL_SWITCH:
1,DTMF_SWITCH:
1,FAST_CS_FB_BASEDON_RIM_SWITCH:
0,L2U_SRVCC_WITH_PS_HO_SWITCH:
0,ULTRA_FLASH_CSFB_SWITCH:
0,RNC_PS_QUERY_UE_IMEISV_SWITCH:0
DeferM BSC690 ADD None None Meaning: Whether SIB3 carries the Deferred
cReadIn 0 UCELL measurement control reading support IE. 1: This
d MEAS switch is turned on. SIB3 carries the Deferred
MOD measurement control reading support IE. 2: This
UCELL switch is turned off. SIB3 does not carry the Deferred
MEAS measurement control reading support IE.
GUI Value Range: FALSE, TRUE
Unit: None
Actual Value Range: FALSE, TRUE
Default Value: False
DeferM BSC691 ADD None None Meaning: Whether SIB3 carries the Deferred
cReadIn 0 UCELL measurement control reading support IE. 1: This
d MEAS switch is turned on. SIB3 carries the Deferred
MOD measurement control reading support IE. 2: This
UCELL switch is turned off. SIB3 does not carry the Deferred
MEAS measurement control reading support IE.
GUI Value Range: FALSE, TRUE
Unit: None
Actual Value Range: FALSE, TRUE
Default Value: False
CH,
PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_S
WITCH,
PERFENH_EVENT_MEAS_ELEM_PROC_OPT_S
WITCH,
PERFENH_CSMODIFY_ADMPRE_OPT_SWITCH,
PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH,
PERFENH_ONE_CNOP_NO_PLMN_LIST_SWITC
H,
PERFENH_DC_HSDPA_GROUP_LOAD_OPT_SWI
TCH, PERFENH_HSPA_SHO_OPT_SWITCH,
PERFENH_DCLOAD_REMAIN_OPT_SWITCH,
PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWITC
H,
PERFENH_DEMARC_SF_LDC_OPT_SWITCH,
PERFENH_PUC_OPT_SWITCH,
PERFENH_PSBERRC_PREEMPT_OPT_SWITCH,
PERFENH_DYNSHUTDOWN_OPT_SWITCH,
PERFENH_SIB4_AC_LIST_OPT_SWITCH,
PERFENH_RESREQ_PROTECT_OPT_SWITCH
Default Value:
PERFENH_MULTIRAB_PREEMPT_OPT_SWITCH
:
0,PERFENH_RRC_PREEMPT_RSRC_OPT_SWITC
H:0,PERFENH_CODEADJ_TIME_OPT_SWITCH:
1,PERFENH_HSDPA_SRBDCH_CODE_CACOPT_
SWITCH:
0,PERFENH_SIB3_MAX_PEROID_LIMIT_SWITC
H:0,PERFENH_SIB3_SCHEDULE_OPT_SWITCH:
0,PERFENH_DEMARC_NODEB_TYPE_REF_SWI
TCH:
1,PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_S
WITCH:
0,PERFENH_EVENT_MEAS_ELEM_PROC_OPT_
SWITCH:
1,PERFENH_CSMODIFY_ADMPRE_OPT_SWITC
H:
0,PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH:
0,PERFENH_ONE_CNOP_NO_PLMN_LIST_SWIT
CH:
0,PERFENH_DC_HSDPA_GROUP_LOAD_OPT_S
WITCH:0,PERFENH_HSPA_SHO_OPT_SWITCH:
0,PERFENH_DCLOAD_REMAIN_OPT_SWITCH:
0,PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWIT
CH:0,
PERFENH_DEMARC_SF_LDC_OPT_SWITCH:
0,PERFENH_PUC_OPT_SWITCH:
0,PERFENH_PSBERRC_PREEMPT_OPT_SWITCH
:0,PERFENH_DYNSHUTDOWN_OPT_SWITCH:
1,PERFENH_SIB4_AC_LIST_OPT_SWITCH:
0,PERFENH_RESREQ_PROTECT_OPT_SWITCH:
0
CH,
PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_S
WITCH,
PERFENH_EVENT_MEAS_ELEM_PROC_OPT_S
WITCH,
PERFENH_CSMODIFY_ADMPRE_OPT_SWITCH,
PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH,
PERFENH_ONE_CNOP_NO_PLMN_LIST_SWITC
H,
PERFENH_DC_HSDPA_GROUP_LOAD_OPT_SWI
TCH, PERFENH_HSPA_SHO_OPT_SWITCH,
PERFENH_DCLOAD_REMAIN_OPT_SWITCH,
PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWITC
H,
PERFENH_DEMARC_SF_LDC_OPT_SWITCH,
PERFENH_PUC_OPT_SWITCH,
PERFENH_PSBERRC_PREEMPT_OPT_SWITCH,
PERFENH_DYNSHUTDOWN_OPT_SWITCH,
PERFENH_SIB4_AC_LIST_OPT_SWITCH,
PERFENH_RESREQ_PROTECT_OPT_SWITCH
Default Value:
PERFENH_MULTIRAB_PREEMPT_OPT_SWITCH
:
0,PERFENH_RRC_PREEMPT_RSRC_OPT_SWITC
H:0,PERFENH_CODEADJ_TIME_OPT_SWITCH:
1,PERFENH_HSDPA_SRBDCH_CODE_CACOPT_
SWITCH:
0,PERFENH_SIB3_MAX_PEROID_LIMIT_SWITC
H:0,PERFENH_SIB3_SCHEDULE_OPT_SWITCH:
0,PERFENH_DEMARC_NODEB_TYPE_REF_SWI
TCH:
1,PERFENH_QOSSHUTDOWN_BY_LOAD_LIC_S
WITCH:
0,PERFENH_EVENT_MEAS_ELEM_PROC_OPT_
SWITCH:
1,PERFENH_CSMODIFY_ADMPRE_OPT_SWITC
H:
0,PERFENH_CHTYPE_CHG_PFM_OPT_SWITCH:
0,PERFENH_ONE_CNOP_NO_PLMN_LIST_SWIT
CH:
0,PERFENH_DC_HSDPA_GROUP_LOAD_OPT_S
WITCH:0,PERFENH_HSPA_SHO_OPT_SWITCH:
0,PERFENH_DCLOAD_REMAIN_OPT_SWITCH:
0,PERFENH_HSPA_CCH_IUB_RSRC_OPT_SWIT
CH:0,
PERFENH_DEMARC_SF_LDC_OPT_SWITCH:
0,PERFENH_PUC_OPT_SWITCH:
0,PERFENH_PSBERRC_PREEMPT_OPT_SWITCH
:0,PERFENH_DYNSHUTDOWN_OPT_SWITCH:
1,PERFENH_SIB4_AC_LIST_OPT_SWITCH:
0,PERFENH_RESREQ_PROTECT_OPT_SWITCH:
0
RrcSetS BSC690 SET WRFD- 3.4/6.8/1 Meaning: Strong coverage threshold of the coverage-
rbRateG 0 USRBR 010510 3.6/27.2 based adaptive SRB rate adjustment algorithm during
oodEcN ATECO Kbps RRC connection setup. If the Ec/No carried in an
oThd VSEL RRC RRC CONNECTION REQUEST message is greater
Connect than or equal to the value of this parameter, 27.2 kbit/s
ion and SRBs are allocated during RRC connection setup. If
Radio the Ec/No is less than the value of the
Access "RrcSetSrbRateBadEcNoThd" parameter, 3.4 kbit/s
Bearer SRBs are allocated during RRC connection setup. If
Establis the Ec/No is between the two parameters' values, 13.6
hment kbit/s SRBs are allocated during RRC connection
and setup.
Release GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -8
RrcSetS BSC691 SET WRFD- 3.4/6.8/1 Meaning: Strong coverage threshold of the coverage-
rbRateG 0 USRBR 010510 3.6/27.2 based adaptive SRB rate adjustment algorithm during
oodEcN ATECO Kbps RRC connection setup. If the Ec/No carried in an
oThd VSEL RRC RRC CONNECTION REQUEST message is greater
Connect than or equal to the value of this parameter, 27.2 kbit/s
ion and SRBs are allocated during RRC connection setup. If
Radio the Ec/No is less than the value of the
Access "RrcSetSrbRateBadEcNoThd" parameter, 3.4 kbit/s
Bearer SRBs are allocated during RRC connection setup. If
Establis the Ec/No is between the two parameters' values, 13.6
hment kbit/s SRBs are allocated during RRC connection
and setup.
Release GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -8
RrcSetS BSC690 SET WRFD- 3.4/6.8/1 Meaning: Weak coverage threshold of the coverage-
rbRateB 0 USRBR 010510 3.6/27.2 based adaptive SRB rate adjustment algorithm during
adEcNo ATECO Kbps RRC connection setup. If the Ec/No carried in an
Thd VSEL RRC RRC CONNECTION REQUEST message is greater
Connect than or equal to the value of the "RrcSetSrbRateGoo-
ion and dEcNoThd" parameter, 27.2 kbit/s SRBs are allocated
Radio during RRC connection setup. If the Ec/No is less
Access than the value of the "RrcSetSrbRateBadEcNoThd"
Bearer parameter, 3.4 kbit/s SRBs are allocated during RRC
Establis connection setup. If the Ec/No is between the two
hment parameters' values, 13.6 kbit/s SRBs are allocated
and during RRC connection setup.
Release GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -14
RrcSetS BSC691 SET WRFD- 3.4/6.8/1 Meaning: Weak coverage threshold of the coverage-
rbRateB 0 USRBR 010510 3.6/27.2 based adaptive SRB rate adjustment algorithm during
adEcNo ATECO Kbps RRC connection setup. If the Ec/No carried in an
Thd VSEL RRC RRC CONNECTION REQUEST message is greater
Connect than or equal to the value of the "RrcSetSrbRateGoo-
ion and dEcNoThd" parameter, 27.2 kbit/s SRBs are allocated
Radio during RRC connection setup. If the Ec/No is less
Access than the value of the "RrcSetSrbRateBadEcNoThd"
Bearer parameter, 3.4 kbit/s SRBs are allocated during RRC
Establis connection setup. If the Ec/No is between the two
hment parameters' values, 13.6 kbit/s SRBs are allocated
and during RRC connection setup.
Release GUI Value Range: -24~0
Unit: dB
Actual Value Range: -24~0
Default Value: -14
RrcSetu BSC690 SET WRFD- 3.4/6.8/1 Meaning: RRC connection setup cause values
pSrbRat 0 USRBR 010510 3.6/27.2 recognized by the coverage-based adaptive SRB rate
eSelSet ATECO Kbps adjustment algorithm.
VSEL RRC GUI Value Range: ORIGCONVCALLEST,
Connect ORIGSTREAMCALLEST, ORIGINTERCALLEST,
ion and ORIGBKGCALLEST, ORIGSUBSTRAFFCALL-
Radio EST, TERMCONVCALLEST,
Access TERMSTREAMCALLEST,
Bearer TERMINTERCALLEST, TERMBKGCALLEST,
Establis EMERGCALLEST, INTERRATCELLRESELEST,
hment INTERRATCELLCHGORDEREST, REGISTEST,
and DETACHEST, ORIGHIGHPRIORSIGEST,
Release ORIGLOWPRIORSIGEST, CALLREEST,
TERMHIGHPRIORSIGEST,
TERMLOWPRIORSIGEST,
TERMCAUSEUNKNOWN, MBMSCALLEST,
DEFAULTEST
Unit: None
Actual Value Range: ORIGCONVCALLEST,
ORIGSTREAMCALLEST, ORIGINTERCALLEST,
ORIGBKGCALLEST, ORIGSUBSTRAFFCALL-
EST, TERMCONVCALLEST,
TERMSTREAMCALLEST,
TERMINTERCALLEST, TERMBKGCALLEST,
EMERGCALLEST, INTERRATCELLRESELEST,
INTERRATCELLCHGORDEREST, REGISTEST,
DETACHEST, ORIGHIGHPRIORSIGEST,
ORIGLOWPRIORSIGEST, CALLREEST,
TERMHIGHPRIORSIGEST,
TERMLOWPRIORSIGEST,
TERMCAUSEUNKNOWN, MBMSCALLEST,
DEFAULTEST
Default Value: ORIGCONVCALLEST:1,
ORIGSTREAMCALLEST:0,
ORIGINTERCALLEST:0, ORIGBKGCALLEST:0,
ORIGSUBSTRAFFCALLEST:0,
TERMCONVCALLEST:1,
TERMSTREAMCALLEST:0,
TERMINTERCALLEST:0, TERMBKGCALLEST:0,
EMERGCALLEST:1, INTERRATCELLRESELEST:
0, INTERRATCELLCHGORDEREST:0,
REGISTEST:0, DETACHEST:0,
ORIGHIGHPRIORSIGEST:0,
ORIGLOWPRIORSIGEST:0, CALLREEST:0,
TERMHIGHPRIORSIGEST:0,
TERMLOWPRIORSIGEST:0,
TERMCAUSEUNKNOWN:0, MBMSCALLEST:0,
DEFAULTEST:0
RrcSetu BSC691 SET WRFD- 3.4/6.8/1 Meaning: RRC connection setup cause values
pSrbRat 0 USRBR 010510 3.6/27.2 recognized by the coverage-based adaptive SRB rate
eSelSet ATECO Kbps adjustment algorithm.
VSEL RRC GUI Value Range: ORIGCONVCALLEST,
Connect ORIGSTREAMCALLEST, ORIGINTERCALLEST,
ion and ORIGBKGCALLEST, ORIGSUBSTRAFFCALL-
Radio EST, TERMCONVCALLEST,
Access TERMSTREAMCALLEST,
Bearer TERMINTERCALLEST, TERMBKGCALLEST,
Establis EMERGCALLEST, INTERRATCELLRESELEST,
hment INTERRATCELLCHGORDEREST, REGISTEST,
and DETACHEST, ORIGHIGHPRIORSIGEST,
Release ORIGLOWPRIORSIGEST, CALLREEST,
TERMHIGHPRIORSIGEST,
TERMLOWPRIORSIGEST,
TERMCAUSEUNKNOWN, MBMSCALLEST,
DEFAULTEST
Unit: None
Actual Value Range: ORIGCONVCALLEST,
ORIGSTREAMCALLEST, ORIGINTERCALLEST,
ORIGBKGCALLEST, ORIGSUBSTRAFFCALL-
EST, TERMCONVCALLEST,
TERMSTREAMCALLEST,
TERMINTERCALLEST, TERMBKGCALLEST,
EMERGCALLEST, INTERRATCELLRESELEST,
INTERRATCELLCHGORDEREST, REGISTEST,
DETACHEST, ORIGHIGHPRIORSIGEST,
ORIGLOWPRIORSIGEST, CALLREEST,
TERMHIGHPRIORSIGEST,
TERMLOWPRIORSIGEST,
TERMCAUSEUNKNOWN, MBMSCALLEST,
DEFAULTEST
Default Value: ORIGCONVCALLEST:1,
ORIGSTREAMCALLEST:0,
ORIGINTERCALLEST:0, ORIGBKGCALLEST:0,
ORIGSUBSTRAFFCALLEST:0,
TERMCONVCALLEST:1,
TERMSTREAMCALLEST:0,
TERMINTERCALLEST:0, TERMBKGCALLEST:0,
EMERGCALLEST:1, INTERRATCELLRESELEST:
0, INTERRATCELLCHGORDEREST:0,
REGISTEST:0, DETACHEST:0,
ORIGHIGHPRIORSIGEST:0,
ORIGLOWPRIORSIGEST:0, CALLREEST:0,
TERMHIGHPRIORSIGEST:0,
TERMLOWPRIORSIGEST:0,
TERMCAUSEUNKNOWN:0, MBMSCALLEST:0,
DEFAULTEST:0
UltraFla BSC690 SET WRFD- Ultra- Meaning: SRB rate for Ultra-Flash CSFB. Upon
shCSFB 0 UFRC 160271 Flash receiving a Relocation Request from an Ultra-Flash
SRBRat CSFB CSFB UE, the RNC allocates the rate specified by this
e parameter to SRBs in both the uplink and downlink.
GUI Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Unit: None
Actual Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Default Value: SRB_13.6K
UltraFla BSC691 SET WRFD- Ultra- Meaning: SRB rate for Ultra-Flash CSFB. Upon
shCSFB 0 UFRC 160271 Flash receiving a Relocation Request from an Ultra-Flash
SRBRat CSFB CSFB UE, the RNC allocates the rate specified by this
e parameter to SRBs in both the uplink and downlink.
GUI Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Unit: None
Actual Value Range: SRB_3.4K, SRB_6.8K,
SRB_13.6K, SRB_27.2K
Default Value: SRB_13.6K
RSVDBIT1_BIT18, RSVDBIT1_BIT19,
RSVDBIT1_BIT20, RSVDBIT1_BIT21,
RSVDBIT1_BIT22, RSVDBIT1_BIT23,
RSVDBIT1_BIT24, RSVDBIT1_BIT25,
RSVDBIT1_BIT26, RSVDBIT1_BIT27,
RSVDBIT1_BIT28, RSVDBIT1_BIT29,
RSVDBIT1_BIT30, RSVDBIT1_BIT31,
RSVDBIT1_BIT32
Default Value:
RSVDBIT1_BIT1:0,NAS_QOS_MOD_SWITCH:
1,RSVDBIT1_BIT3:0,RSVDBIT1_BIT4:0,RSVDBIT
1_BIT5:0,RSVDBIT1_BIT6:0,RSVDBIT1_BIT7:0,R
SVDBIT1_BIT8:0,RSVDBIT1_BIT9:0,RSVDBIT1_
BIT10:0,RSVDBIT1_BIT11:0,RSVDBIT1_BIT12:0,
RSVDBIT1_BIT13:0,RSVDBIT1_BIT14:0,RSVDBI
T1_BIT15:0,RSVDBIT1_BIT16:0,SYSHO_CSIN_PE
RMIT_SWITCH:
1,RSVDBIT1_BIT18:1,RSVDBIT1_BIT19:1,RSVDB
IT1_BIT20:1,RSVDBIT1_BIT21:1,RSVDBIT1_BIT2
2:1,RSVDBIT1_BIT23:1,RSVDBIT1_BIT24:1,RSV
DBIT1_BIT25:1,RSVDBIT1_BIT26:1,RSVDBIT1_B
IT27:1,RSVDBIT1_BIT28:1,RSVDBIT1_BIT29:1,R
SVDBIT1_BIT30:1,RSVDBIT1_BIT31:1,RSVDBIT
1_BIT32:1
RSVDBIT1_BIT18, RSVDBIT1_BIT19,
RSVDBIT1_BIT20, RSVDBIT1_BIT21,
RSVDBIT1_BIT22, RSVDBIT1_BIT23,
RSVDBIT1_BIT24, RSVDBIT1_BIT25,
RSVDBIT1_BIT26, RSVDBIT1_BIT27,
RSVDBIT1_BIT28, RSVDBIT1_BIT29,
RSVDBIT1_BIT30, RSVDBIT1_BIT31,
RSVDBIT1_BIT32
Default Value:
RSVDBIT1_BIT1:0,NAS_QOS_MOD_SWITCH:
1,RSVDBIT1_BIT3:0,RSVDBIT1_BIT4:0,RSVDBIT
1_BIT5:0,RSVDBIT1_BIT6:0,RSVDBIT1_BIT7:0,R
SVDBIT1_BIT8:0,RSVDBIT1_BIT9:0,RSVDBIT1_
BIT10:0,RSVDBIT1_BIT11:0,RSVDBIT1_BIT12:0,
RSVDBIT1_BIT13:0,RSVDBIT1_BIT14:0,RSVDBI
T1_BIT15:0,RSVDBIT1_BIT16:0,SYSHO_CSIN_PE
RMIT_SWITCH:
1,RSVDBIT1_BIT18:1,RSVDBIT1_BIT19:1,RSVDB
IT1_BIT20:1,RSVDBIT1_BIT21:1,RSVDBIT1_BIT2
2:1,RSVDBIT1_BIT23:1,RSVDBIT1_BIT24:1,RSV
DBIT1_BIT25:1,RSVDBIT1_BIT26:1,RSVDBIT1_B
IT27:1,RSVDBIT1_BIT28:1,RSVDBIT1_BIT29:1,R
SVDBIT1_BIT30:1,RSVDBIT1_BIT31:1,RSVDBIT
1_BIT32:1
IRatHo BSC690 SET WRFD- SRVCC Meaning: Timer set for the RNC to wait for the
WaitPS 0 USTAT 150215 from RELOCATION REQUEST message from the PS
RelocRe ETIME LTE to domain if the RNC has received the message from the
qTmr R UMTS CS domain during incoming inter-RAT handovers for
with PS CS+PS combined services.
Handov GUI Value Range: 100~10000
er
Unit: ms
Actual Value Range: 100~10000
Default Value: 3000
IRatHo BSC691 SET WRFD- SRVCC Meaning: Timer set for the RNC to wait for the
WaitPS 0 USTAT 150215 from RELOCATION REQUEST message from the PS
RelocRe ETIME LTE to domain if the RNC has received the message from the
qTmr R UMTS CS domain during incoming inter-RAT handovers for
with PS CS+PS combined services.
Handov GUI Value Range: 100~10000
er
Unit: ms
Actual Value Range: 100~10000
Default Value: 3000
IRatHo BSC690 SET WRFD- SRVCC Meaning: Timer set for the RNC to wait for the
WaitCS 0 USTAT 150215 from RELOCATION REQUEST message from the CS
RelocRe ETIME LTE to domain if the RNC has received this message from the
qTmr R UMTS PS domain during incoming inter-RAT handovers for
with PS CS+PS combined services.
Handov GUI Value Range: 100~10000
er
Unit: ms
Actual Value Range: 100~10000
Default Value: 5000
IRatHo BSC691 SET WRFD- SRVCC Meaning: Timer set for the RNC to wait for the
WaitCS 0 USTAT 150215 from RELOCATION REQUEST message from the CS
RelocRe ETIME LTE to domain if the RNC has received this message from the
qTmr R UMTS PS domain during incoming inter-RAT handovers for
with PS CS+PS combined services.
Handov GUI Value Range: 100~10000
er
Unit: ms
Actual Value Range: 100~10000
Default Value: 5000
11)MOCN_REDIR_GET_SPID_OPT_SWITCH(SPI
D Selection Optimization Switch for Redirection)
Whether non-supporting UEs select the subscriber
profile ID (SPID) in an optimized way when
accessing the network in a MOCN cell.
1: Indicates that this switch is set to ON. Non-
supporting UEs select the SPID of the most recent
serving operator.
0: Indicates that this switch is set to OFF. Non-
supporting UEs select the most recent valid SPID.
12)RELOC_WITHOUT_GLOBAL_CN_ID_OPT_S
WITCH
Whether the RNC correctly processes a relocation
procedure when the Relocation Request message does
not contain the Global CN ID in Iu Flex scenarios.
1: Indicates that this switch is set to ON. The RNC
correctly processes a relocation procedure when the
Relocation Request message does not contain the
Global CN ID in Iu Flex scenarios.
0: Indicates that this switch is set to OFF. The RNC
occasionally fails to process a relocation procedure
when the Relocation Request message does not
contain the Global CN ID in Iu Flex scenarios.
13) RELOC_ACK_WAIT_IUUP_INIT_SWITCH
(Send RELOCATION ACK After IuUP Initialized)
Whether the RNC waits until the IuUP initialization is
complete and then sends a RELOCATION ACK
message to the CN during an incoming relocation
procedure.
1: Indicates that this switch is set to ON. The RNC
does not send a RELOCATION ACK message to the
CN until the IuUP initialization is complete during an
incoming relocation procedure.
0: Indicates that this switch is set to OFF. The RNC
sends a RELOCATION ACK message to the CN,
regardless of whether the IuUP initialization is
complete.
14)ASU_CU_CROSS_OPT_ENH_SWITCH
Whether the enhancement of RL reestablishment
optimization takes effect when an active set update
procedure overlaps with a cell update procedure.
1: Indicates that this switch is set to ON. The
enhancement of RL reestablishment optimization
ST_OPT_ENH_SWITCH),
DCH_CU_CHGCELL_OPT_SWITCH(DCH_CU_C
HGCELL_OPT_SWITCH),
RELOC_SILENT_DETECT_SWITCH(RELOC_SIL
ENT_DETECT_SWITCH),
RL_FAIL_SUSP_SHO_DEL_SWITCH(RL_FAIL_S
USP_SHO_DEL_SWITCH)
Unit: None
Actual Value Range:
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABL
E,
MNTN_TWO_PENDING_INTEGRITY_CFG_SWIT
CH,
DCCC_HHO_CU_NO_CHANGING_GTPU_IP_SWI
TCH,
RAB_MODIFY_NO_CHANGING_GTPU_IP_SWIT
CH,
IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SWIT
CH,
STATE_TRANS_COUNT_OPT_SWITCH,
CU_RB_CFG_OPT_SWITCH,
SEND_RNSAP_RESET_AGAIN_SWITCH,
SYS_HO_RELOC_CMP_OPT_SWITCH,
CSPS_SYS_HO_IN_SMC_SWITCH,
MOCN_REDIR_GET_SPID_OPT_SWITCH,
RELOC_WITHOUT_GLOBAL_CN_ID_OPT_SWIT
CH,
RELOC_ACK_WAIT_IUUP_INIT_SWITCH,
ASU_CU_CROSS_OPT_ENH_SWITCH,
RB_RL_REEST_OPT_ENH_SWITCH,
DCH_CU_CHGCELL_OPT_SWITCH,
RELOC_SILENT_DETECT_SWITCH,
RL_FAIL_SUSP_SHO_DEL_SWITCH
Default Value:
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABL
E:
0,MNTN_TWO_PENDING_INTEGRITY_CFG_SW
ITCH:
0,DCCC_HHO_CU_NO_CHANGING_GTPU_IP_S
WITCH:
0,RAB_MODIFY_NO_CHANGING_GTPU_IP_SWI
TCH:
0,IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SW
ITCH:0,STATE_TRANS_COUNT_OPT_SWITCH:
0,CU_RB_CFG_OPT_SWITCH:
0,SEND_RNSAP_RESET_AGAIN_SWITCH:
0,SYS_HO_RELOC_CMP_OPT_SWITCH:
0,CSPS_SYS_HO_IN_SMC_SWITCH:
0,MOCN_REDIR_GET_SPID_OPT_SWITCH:
1,RELOC_WITHOUT_GLOBAL_CN_ID_OPT_SWI
TCH:0,RELOC_ACK_WAIT_IUUP_INIT_SWITCH:
0,ASU_CU_CROSS_OPT_ENH_SWITCH:
0,RB_RL_REEST_OPT_ENH_SWITCH:
0,DCH_CU_CHGCELL_OPT_SWITCH:
0,RELOC_SILENT_DETECT_SWITCH:
0,RL_FAIL_SUSP_SHO_DEL_SWITCH:0
11)MOCN_REDIR_GET_SPID_OPT_SWITCH(SPI
D Selection Optimization Switch for Redirection)
Whether non-supporting UEs select the subscriber
profile ID (SPID) in an optimized way when
accessing the network in a MOCN cell.
1: Indicates that this switch is set to ON. Non-
supporting UEs select the SPID of the most recent
serving operator.
0: Indicates that this switch is set to OFF. Non-
supporting UEs select the most recent valid SPID.
12)RELOC_WITHOUT_GLOBAL_CN_ID_OPT_S
WITCH
Whether the RNC correctly processes a relocation
procedure when the Relocation Request message does
not contain the Global CN ID in Iu Flex scenarios.
1: Indicates that this switch is set to ON. The RNC
correctly processes a relocation procedure when the
Relocation Request message does not contain the
Global CN ID in Iu Flex scenarios.
0: Indicates that this switch is set to OFF. The RNC
occasionally fails to process a relocation procedure
when the Relocation Request message does not
contain the Global CN ID in Iu Flex scenarios.
13) RELOC_ACK_WAIT_IUUP_INIT_SWITCH
(Send RELOCATION ACK After IuUP Initialized)
Whether the RNC waits until the IuUP initialization is
complete and then sends a RELOCATION ACK
message to the CN during an incoming relocation
procedure.
1: Indicates that this switch is set to ON. The RNC
does not send a RELOCATION ACK message to the
CN until the IuUP initialization is complete during an
incoming relocation procedure.
0: Indicates that this switch is set to OFF. The RNC
sends a RELOCATION ACK message to the CN,
regardless of whether the IuUP initialization is
complete.
14)ASU_CU_CROSS_OPT_ENH_SWITCH
Whether the enhancement of RL reestablishment
optimization takes effect when an active set update
procedure overlaps with a cell update procedure.
1: Indicates that this switch is set to ON. The
enhancement of RL reestablishment optimization
ST_OPT_ENH_SWITCH),
DCH_CU_CHGCELL_OPT_SWITCH(DCH_CU_C
HGCELL_OPT_SWITCH),
RELOC_SILENT_DETECT_SWITCH(RELOC_SIL
ENT_DETECT_SWITCH),
RL_FAIL_SUSP_SHO_DEL_SWITCH(RL_FAIL_S
USP_SHO_DEL_SWITCH)
Unit: None
Actual Value Range:
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABL
E,
MNTN_TWO_PENDING_INTEGRITY_CFG_SWIT
CH,
DCCC_HHO_CU_NO_CHANGING_GTPU_IP_SWI
TCH,
RAB_MODIFY_NO_CHANGING_GTPU_IP_SWIT
CH,
IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SWIT
CH,
STATE_TRANS_COUNT_OPT_SWITCH,
CU_RB_CFG_OPT_SWITCH,
SEND_RNSAP_RESET_AGAIN_SWITCH,
SYS_HO_RELOC_CMP_OPT_SWITCH,
CSPS_SYS_HO_IN_SMC_SWITCH,
MOCN_REDIR_GET_SPID_OPT_SWITCH,
RELOC_WITHOUT_GLOBAL_CN_ID_OPT_SWIT
CH,
RELOC_ACK_WAIT_IUUP_INIT_SWITCH,
ASU_CU_CROSS_OPT_ENH_SWITCH,
RB_RL_REEST_OPT_ENH_SWITCH,
DCH_CU_CHGCELL_OPT_SWITCH,
RELOC_SILENT_DETECT_SWITCH,
RL_FAIL_SUSP_SHO_DEL_SWITCH
Default Value:
PS_RAB_REL_GTPU_RESOURCE_UNAVAILABL
E:
0,MNTN_TWO_PENDING_INTEGRITY_CFG_SW
ITCH:
0,DCCC_HHO_CU_NO_CHANGING_GTPU_IP_S
WITCH:
0,RAB_MODIFY_NO_CHANGING_GTPU_IP_SWI
TCH:
0,IUR_F2P_P2P_OVERLAP_CU_TRIG_DSCR_SW
ITCH:0,STATE_TRANS_COUNT_OPT_SWITCH:
0,CU_RB_CFG_OPT_SWITCH:
0,SEND_RNSAP_RESET_AGAIN_SWITCH:
0,SYS_HO_RELOC_CMP_OPT_SWITCH:
0,CSPS_SYS_HO_IN_SMC_SWITCH:
0,MOCN_REDIR_GET_SPID_OPT_SWITCH:
1,RELOC_WITHOUT_GLOBAL_CN_ID_OPT_SWI
TCH:0,RELOC_ACK_WAIT_IUUP_INIT_SWITCH:
0,ASU_CU_CROSS_OPT_ENH_SWITCH:
0,RB_RL_REEST_OPT_ENH_SWITCH:
0,DCH_CU_CHGCELL_OPT_SWITCH:
0,RELOC_SILENT_DETECT_SWITCH:
0,RL_FAIL_SUSP_SHO_DEL_SWITCH:0
13)EFACH_RRC_REG_CMP_SWITCH(E-FACH
RRC Registration Compatibility Switch)
Whether special UEs use the E-FACH to carry their
RRC CONNECTION SETUP messages when the cell
is enabled with E-FACH.
1: This switch is set to on. the RNC retransmits the
last RRC CONNECTION SETUP message on the E-
FACH if special users do not respond to the RRC
CONNECTION SETUP message on the FACH. If the
UE returns an RRC CONNECTION SETUP CMP
message, the UE stays in the CELL_DCH state during
data transmission.
0: This switch is set to off. no special processing is
performed on special users.
14)
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH
(Discard Responses with Incorrect TRANSCIDs from
UEs During P2D)
Whether the RNC discards a RADIO BEARER
RECONFIGURATION COMPLETE message
received from a UE during P2D state transitions when
the value of the "RRC transaction identifier" IE in the
message is incorrect.
1: This switch is set to on. The RNC discards the
message and waits for the UE's response.
0: This switch is set to off. The RNC rolls back the
P2D state transition procedure.
15)
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH (HHO Rollback Switch for 12.2K AMR Services
with AMRC Enabled)
Whether the RNC performs rollback after 12.2 kbit/s
AMR-NB services experience hard handover failures
in the scenario where the narrowband AMRC function
takes effect.
0: This switch is set to off. The RNC does not perform
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
1: This switch is set to on. The RNC performs
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
16)RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH
29)INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H(Integrity Protection Optimization Switch for
Incoming Inter-RAT Handovers)
Whether the optimized integrity protection function is
enabled for incoming L2U or G2U inter-RAT
handovers.
1: This switch is set to on. The integrity protection
function is immediately activated for SRB0 to SRB4
after the incoming L2U or G2U inter-RAT handover is
complete.
0: This switch is set to off. The integrity protection
function is activated only for SRB2 after the incoming
L2U or G2U inter-RAT handover is complete. The
integrity protection for other SRBs (SRB0, SRB1,
SRB3, and SRB4) is activated only after the UE sends
a message.
30)CS_PAGING_OVERLAP_RRC_OPT_SWITCH(
Optimize CS Paging During RRC Procedures)
Whether the RNC performs optimized processing
when a UE is paged in the CS domain during an RRC
connection setup procedure.
1: Indicates that this switch is set to ON. The RNC
performs optimized processing when a UE is paged in
the CS domain during an RRC connection setup
procedure.
0: Indicates that this switch is set to OFF. The access
delay of the CS paging procedure increases.
31)INTRA_NODEB_RLCC_INIT_CAP_OPT_SWIT
CH(Optimize the Rate upon NodeB RL Change for H
Services)
Whether the rate optimization policy is applied in the
scenario where the radio link (RL) for HSPA services
changes inside the NodeB.
1: This switch is set to on. The rate optimization
policy is applied in the scenario where the RL for
HSPA services changes inside the NodeB.
0: This switch is set to off. The rate optimization
policy is not applied in the scenario where the RL for
HSPA services changes inside the NodeB.
32)DRNC_RL_PARA_UPT_OPT_SWITCH(RL
Parameter Update Optimization Switch on RNC)
Whether the RL PARA UPT IND message over the
Iur interface can be correctly processed.
DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH,
RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H,
SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH,
PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,
CS_PAGING_OVERLAP_RRC_OPT_SWITCH,
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
,
DRNC_RL_PARA_UPT_OPT_SWITCH
Default Value:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH:
0,RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH:0,DRNC_RL_REEST_OPT_SWITCH:
1,URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH:0,RB_SETUP_F2D_USE_AM_RLC_SWITCH:
0,RB_RECFG_D2F_USE_AM_RLC_SWITCH:
0,RB_RECFG_F2D_USE_AM_RLC_SWITCH:
0,RRC_UE_USER_SMOOTH_OPT_SWITCH:
1,TRNC_LOAD_CTRL_SWITCH:
0,IU_SIG_REL_PCH_PAGING_SWITCH:
0,CPC_OPT_FOR_RLSETUP_SWITCH:
1,D2P_L2DEACT_FAIL_OPT_SWITCH:
0,EFACH_RRC_REG_CMP_SWITCH:
0,P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITC
H:
0,AMRC_ON_122_AMR_HHO_ROLL_BACK_SWI
TCH:
0,RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH:0,SCM_CU_CROSS_SWITCH:
0,DRNC_HSPA_CM_OPT_SWITCH:
0,IUB_TRANSID_OPT_SWITCH:
0,L2_ENHENCE_RECFG_OPT_SWITCH:
0,ASYN_RL_REEST_OPT_SWITCH:
0,RNC_IMSI_HO_OPT_SWITCH:
0,IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWI
TCH:
0,URA_PCH_LAC_RAC_CHG_NO_PAGING_SWI
TCH:0,PAGING_OVERLAP_CU_OPT_SWITCH:
0,SRVCC_RELOC_IN_USE_CS_KEY_SWITCH:
1,SOCKET_RECEIVE_DATA_CORRECT_SWITCH
:1,CU_PRI_OVERLAP_OTHER_PROC_SWITCH:
0,INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H:0,CS_PAGING_OVERLAP_RRC_OPT_SWITCH:
0,INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITC
H:0,DRNC_RL_PARA_UPT_OPT_SWITCH:1
L2USR BSC690 SET WRFD- SRVCC Meaning: ARP value to identify an emergency call in
VCCEm 0 UFRC 150215 from CS only SRVCC handover or CS+PS SRVCC
erCallA LTE to handover. During LTE-to-UMTS SRVCC, if the ARP
RP UMTS value included in a RELOCATION REQUEST
with PS message for an AMR service is the same as the value
Handov of this parameter, the RNC identifies the AMR service
er as an emergency call. When this parameter is set to 0,
the RNC does not determine whether an emergency
call is involved in CS only SRVCC handover or CS
+PS SRVCC handover.
GUI Value Range: 0~15
Unit: None
Actual Value Range: 0~15
Default Value: 0
L2USR BSC691 SET WRFD- SRVCC Meaning: ARP value to identify an emergency call in
VCCEm 0 UFRC 150215 from CS only SRVCC handover or CS+PS SRVCC
erCallA LTE to handover. During LTE-to-UMTS SRVCC, if the ARP
RP UMTS value included in a RELOCATION REQUEST
with PS message for an AMR service is the same as the value
Handov of this parameter, the RNC identifies the AMR service
er as an emergency call. When this parameter is set to 0,
the RNC does not determine whether an emergency
call is involved in CS only SRVCC handover or CS
+PS SRVCC handover.
GUI Value Range: 0~15
Unit: None
Actual Value Range: 0~15
Default Value: 0
12)CDT_MSG_FULL_TRACE.
1: This switch is turned on. CDT trace function starts
tracing from message RRC CONNECT REQUEST.
0: This switch is turned off. CDT trace function starts
tracing from message COMMON ID.
13)CR2284R1_COMPATIBLE_SWITCH.
CR2284R1 causes the compatible problem. if UE is
not consistent with RNC regarding whether accept the
CR2284R1 or not, it will cause the problem of
streaming when UEs are communicating with each
other. So RNC creates this switch. when it is checked,
RNC is auto-adaptive to accept the CR2284R1
according to UE version information. The principles
that RNC judges UE whether to accept the CR2284R1
are as follows: R5 and above UE accepts the CR;
R99/R4 UE, if it receives the START LIST value from
RB SETUP COMPLETE,RNC figures that UE
accepts the CR; R99/R4 UE, if it only receives the
START value from RB SETUP COMPLETE,RNC
figures that UE does not accept the CR; when it is not
checked, whether RNC accept the CR or not is
according to CR2284R1_SWITCH. The relations
between these two switches CR2284R1_SWITCH and
CR2284R1_COMPATIBLE_SWITCH are as follows:
1: This switch is turned on. RNC is self-compatible,
so the CR2284R1_SWITCH is invalid;
0: This switch is turned off. The
CR2284R1_SWITCH is valid.
14)COMBINE_OPERATION_DRD_SWITCH.
1: This switch is turned on. RNC will not reject the
message RB SETUP CMP without the IE active time.
0: This switch is turned off. RNC will reject the
message RB SETUP CMP without the IE active time.
15)UL_INTER_PROTECT_SWITCH.
Although the configuration interface in this version
supports delivery and synchronization of the bit field
value, the bit field value is no longer internally used.
1: This switch is turned on. RNC will do integrity
protection check for uplink RRC messages.
0: This switch is turned off. RNC will not do integrity
protection check for uplink RRC messages.
16)FAST_DORMANCY_SWITCH.
1: This switch is turned on. RNC will apply FAST
DORMANCY function.
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTIO
N,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Unit: None
Actual Value Range:
INVOKE_TRACE_SWITCH,
SYS_INFO_UPDATE_FOR_IU_RST,
DRNC_DIRECT_DSCR,
PTUSER_IDENTIFY_ENH_SWITCH,
RNC_SHARE_SWITCH,
RNCAP_IMSI_HO_SWITCH,
TERMINAL_VERSION_DEBASE_SWITCH,
SYS_HO_OUT_CIPHER_SWITCH,
SYS_HO_CIPHER_CONFIG,
BARRED_CELL_FOR_CSDOMAIN_RST,
CR2284R1_SWITCH, CDT_MSG_FULL_TRACE,
CR2284R1_COMPATIBLE_SWITCH,
COMBINE_OPERATION_DRD_SWITCH,
UL_INTER_PROTECT_SWITCH,
FAST_DORMANCY_SWITCH,
SYS_HO_IN_CIPHER_SWITCH,
PTT_EARLY_TRANS_SWITCH_OFF,
UPLINK_MDC_ENHENCEMENT_SWITCH,
NODEB_PRIVATE_INTERFACE_SWITCH,
PTT_SPEC_LI_SWITCH_OFF,
RNC_DF_2_URA_PCH_SWITCH,
FD_TAC_MATCH_SWITCH,
NONPTT_L1_FAST_SYNC_SWITCH,
URAPCH_LAYERED_PAGING_RT_SWITCH,
URAPCH_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTIO
N,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Default Value: INVOKE_TRACE_SWITCH:
0,SYS_INFO_UPDATE_FOR_IU_RST:
0,DRNC_DIRECT_DSCR:
0,PTUSER_IDENTIFY_ENH_SWITCH:
0,RNC_SHARE_SWITCH:
1,RNCAP_IMSI_HO_SWITCH:
0,TERMINAL_VERSION_DEBASE_SWITCH:
0,SYS_HO_OUT_CIPHER_SWITCH:
12)CDT_MSG_FULL_TRACE.
1: This switch is turned on. CDT trace function starts
tracing from message RRC CONNECT REQUEST.
0: This switch is turned off. CDT trace function starts
tracing from message COMMON ID.
13)CR2284R1_COMPATIBLE_SWITCH.
CR2284R1 causes the compatible problem. if UE is
not consistent with RNC regarding whether accept the
CR2284R1 or not, it will cause the problem of
streaming when UEs are communicating with each
other. So RNC creates this switch. when it is checked,
RNC is auto-adaptive to accept the CR2284R1
according to UE version information. The principles
that RNC judges UE whether to accept the CR2284R1
are as follows: R5 and above UE accepts the CR;
R99/R4 UE, if it receives the START LIST value from
RB SETUP COMPLETE,RNC figures that UE
accepts the CR; R99/R4 UE, if it only receives the
START value from RB SETUP COMPLETE,RNC
figures that UE does not accept the CR; when it is not
checked, whether RNC accept the CR or not is
according to CR2284R1_SWITCH. The relations
between these two switches CR2284R1_SWITCH and
CR2284R1_COMPATIBLE_SWITCH are as follows:
1: This switch is turned on. RNC is self-compatible,
so the CR2284R1_SWITCH is invalid;
0: This switch is turned off. The
CR2284R1_SWITCH is valid.
14)COMBINE_OPERATION_DRD_SWITCH.
1: This switch is turned on. RNC will not reject the
message RB SETUP CMP without the IE active time.
0: This switch is turned off. RNC will reject the
message RB SETUP CMP without the IE active time.
15)UL_INTER_PROTECT_SWITCH.
Although the configuration interface in this version
supports delivery and synchronization of the bit field
value, the bit field value is no longer internally used.
1: This switch is turned on. RNC will do integrity
protection check for uplink RRC messages.
0: This switch is turned off. RNC will not do integrity
protection check for uplink RRC messages.
16)FAST_DORMANCY_SWITCH.
1: This switch is turned on. RNC will apply FAST
DORMANCY function.
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTIO
N,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Unit: None
Actual Value Range:
INVOKE_TRACE_SWITCH,
SYS_INFO_UPDATE_FOR_IU_RST,
DRNC_DIRECT_DSCR,
PTUSER_IDENTIFY_ENH_SWITCH,
RNC_SHARE_SWITCH,
RNCAP_IMSI_HO_SWITCH,
TERMINAL_VERSION_DEBASE_SWITCH,
SYS_HO_OUT_CIPHER_SWITCH,
SYS_HO_CIPHER_CONFIG,
BARRED_CELL_FOR_CSDOMAIN_RST,
CR2284R1_SWITCH, CDT_MSG_FULL_TRACE,
CR2284R1_COMPATIBLE_SWITCH,
COMBINE_OPERATION_DRD_SWITCH,
UL_INTER_PROTECT_SWITCH,
FAST_DORMANCY_SWITCH,
SYS_HO_IN_CIPHER_SWITCH,
PTT_EARLY_TRANS_SWITCH_OFF,
UPLINK_MDC_ENHENCEMENT_SWITCH,
NODEB_PRIVATE_INTERFACE_SWITCH,
PTT_SPEC_LI_SWITCH_OFF,
RNC_DF_2_URA_PCH_SWITCH,
FD_TAC_MATCH_SWITCH,
NONPTT_L1_FAST_SYNC_SWITCH,
URAPCH_LAYERED_PAGING_RT_SWITCH,
URAPCH_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_NRT_SWITCH,
IDLE_LAYERED_PAGING_RT_SWITCH,
INTELLIGENT_WIFI_DETECT_AND_SELECTIO
N,
INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH,
PTUSER_IDENTIFY_SWITCH
Default Value: INVOKE_TRACE_SWITCH:
0,SYS_INFO_UPDATE_FOR_IU_RST:
0,DRNC_DIRECT_DSCR:
0,PTUSER_IDENTIFY_ENH_SWITCH:
0,RNC_SHARE_SWITCH:
1,RNCAP_IMSI_HO_SWITCH:
0,TERMINAL_VERSION_DEBASE_SWITCH:
0,SYS_HO_OUT_CIPHER_SWITCH:
LoadLe BSC690 SET WRFD- RIM Meaning: After the RIM-based cell load sharing
velForL 0 ULDM 150231 Based function is enabled (controlled by the
TE UMTS INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH
Target under the "PROCESSSWITCH" parameter in the
Cell "SET URRCTRLSWITCH" command), the RNC
Selectio reports UMTS cell load information to the eNodeB
n for based on eNodeB requests. This parameter specifies
LTE the number of load state levels to be reported. When
this parameter is set to D3, three load states are
reported (including overload, congestion, and normal).
When this parameter is set to D4, four loads states are
reported (including overload, congestion, normal, and
light).
GUI Value Range: D3, D4
Unit: None
Actual Value Range: 3, 4
Default Value: D3
LoadLe BSC691 SET WRFD- RIM Meaning: After the RIM-based cell load sharing
velForL 0 ULDM 150231 Based function is enabled (controlled by the
TE UMTS INTERRAT_LOAD_REPORT_FOR_LTE_SWITCH
Target under the "PROCESSSWITCH" parameter in the
Cell "SET URRCTRLSWITCH" command), the RNC
Selectio reports UMTS cell load information to the eNodeB
n for based on eNodeB requests. This parameter specifies
LTE the number of load state levels to be reported. When
this parameter is set to D3, three load states are
reported (including overload, congestion, and normal).
When this parameter is set to D4, four loads states are
reported (including overload, congestion, normal, and
light).
GUI Value Range: D3, D4
Unit: None
Actual Value Range: 3, 4
Default Value: D3
DlPwrP BSC690 ADD WRFD- Inter- Meaning: Threshold for triggering PS CLB state based
SClbTri 0 UCELL 140217 Frequen on downlink power usage. If the percentage of
gThd LDM cy Load downlink power usage is higher than or equal to this
MOD Balancin threshold for a duration longer than that specified by
UCELL g Based the "DlLdTrnsHysTime" parameter, downlink PS
LDM on CLB state based on downlink power usage is
Configu triggered. The recommended value difference between
rable "DlPwrPSClbRelThd" and "DlPwrPSClbTrigThd" is
Load higher than 10% because the load fluctuates.
Threshol Otherwise, a cell frequently enters and leaves the PS
d CLB state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 40
DlPwrP BSC691 ADD WRFD- Inter- Meaning: Threshold for triggering PS CLB state based
SClbTri 0 UCELL 140217 Frequen on downlink power usage. If the percentage of
gThd LDM cy Load downlink power usage is higher than or equal to this
MOD Balancin threshold for a duration longer than that specified by
UCELL g Based the "DlLdTrnsHysTime" parameter, downlink PS
LDM on CLB state based on downlink power usage is
Configu triggered. The recommended value difference between
rable "DlPwrPSClbRelThd" and "DlPwrPSClbTrigThd" is
Load higher than 10% because the load fluctuates.
Threshol Otherwise, a cell frequently enters and leaves the PS
d CLB state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 40
LoadUpt BSC690 SET WRFD- Load Meaning: Period for the RNC to update the UMTS
ForLTE 0 ULDM 020102 Measure cell load information sent to the eNodeB. The RNC
TimerLe ment identifies all the UMTS cells whose load has changed
n within the time specified by this parameter. When this
parameter is set to 0, the RNC updates the UMTS cell
load information at a maximum interval of 10s.
GUI Value Range: 0~255
Unit: s
Actual Value Range: 0~255
Default Value: 3
LoadUpt BSC691 SET WRFD- Load Meaning: Period for the RNC to update the UMTS
ForLTE 0 ULDM 020102 Measure cell load information sent to the eNodeB. The RNC
TimerLe ment identifies all the UMTS cells whose load has changed
n within the time specified by this parameter. When this
parameter is set to 0, the RNC updates the UMTS cell
load information at a maximum interval of 10s.
GUI Value Range: 0~255
Unit: s
Actual Value Range: 0~255
Default Value: 3
LoadUpt BSC690 SET WRFD- Load Meaning: Maximum number of UMTS cell load
ForLTE 0 UNBMP 020102 Measure broadcast messages that can be sent to the eNodeB by
MaxNu HYPAR ment an RNC subsystem per second. For example, if this
m A parameter is set to 128, the maximum number of
UMTS cell load broadcast messages sent by all cells
to the eNodeB per second cannot exceed 128. If this
parameter is set to 0, each cell can send only one
UMTS cell load broadcast message to the eNodeB per
second.
GUI Value Range: 0~255
Unit: None
Actual Value Range: 0~255
Default Value: 128
LoadUpt BSC691 SET WRFD- Load Meaning: Maximum number of UMTS cell load
ForLTE 0 UNBMP 020102 Measure broadcast messages that can be sent to the eNodeB by
MaxNu HYPAR ment an RNC subsystem per second. For example, if this
m A parameter is set to 128, the maximum number of
UMTS cell load broadcast messages sent by all cells
to the eNodeB per second cannot exceed 128. If this
parameter is set to 0, each cell can send only one
UMTS cell load broadcast message to the eNodeB per
second.
GUI Value Range: 0~255
Unit: None
Actual Value Range: 0~255
Default Value: 128
TargetR BSC690 SET WRFD- PS Meaning: RSRP threshold for event 3C for LTE cell
atThdRS 0 UU2LT 020129 Service measurements during a non-coverage-based handover.
RP EHONC WRFD- Redirect If RSRP is used as the measurement quantity for event
OV 140218 ion from 3C, event 3C can be triggered only when the signal
UMTS quality of the target cell is greater than the
to LTE threshold.For details about this parameter, see section
Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
Based in 3GPP TS 25.331. The RNC carries the Threshold
PS other system IE in the measurement control message
Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system - 25 [dBm], Threshold
to LTE other system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC691 SET WRFD- PS Meaning: RSRP threshold for event 3C for LTE cell
atThdRS 0 UU2LT 020129 Service measurements during a non-coverage-based handover.
RP EHONC WRFD- Redirect If RSRP is used as the measurement quantity for event
OV 140218 ion from 3C, event 3C can be triggered only when the signal
UMTS quality of the target cell is greater than the
to LTE threshold.For details about this parameter, see section
Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
Based in 3GPP TS 25.331. The RNC carries the Threshold
PS other system IE in the measurement control message
Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system - 25 [dBm], Threshold
to LTE other system = GUI value - 116.
GUI Value Range: 1~97
Unit: dBm
Actual Value Range: -140~-44(Actual value meets the
condition: Actual Value = GUI Value - 141)
Default Value: 36
TargetR BSC690 SET WRFD- PS Meaning: RSRQ threshold for event 3C for LTE cell
atThdRS 0 UU2LT 020129 Service measurements during a non-coverage-based handover.
RQ EHONC WRFD- Redirect If RSRQ is used as the measurement quantity for
OV 140218 ion from event 3C, event 3C can be triggered only when the
UMTS signal quality of the target cell is greater than the
to LTE threshold. For details about this parameter, see section
Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
Based in 3GPP TS 25.331. The RNC carries the Threshold
PS other system IE in the measurement control message
Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system/2 [dB], Threshold
to LTE other system = GUI value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
TargetR BSC691 SET WRFD- PS Meaning: RSRQ threshold for event 3C for LTE cell
atThdRS 0 UU2LT 020129 Service measurements during a non-coverage-based handover.
RQ EHONC WRFD- Redirect If RSRQ is used as the measurement quantity for
OV 140218 ion from event 3C, event 3C can be triggered only when the
UMTS signal quality of the target cell is greater than the
to LTE threshold. For details about this parameter, see section
Service- 10.3.7.30 "Inter-RAT measurement reporting criteria"
Based in 3GPP TS 25.331. The RNC carries the Threshold
PS other system IE in the measurement control message
Handov sent to the UE. This IE is used to calculate the actual
er from value of the inter-RAT measurement threshold. Actual
UMTS value = Threshold other system/2 [dB], Threshold
to LTE other system = GUI value - 40.
GUI Value Range: 1~34
Unit: dB
Actual Value Range: -19.5~-3(Actual value meets the
condition: Actual Value = GUI Value*0.5 - 20)
Default Value: 20
NodeBP BSC690 ADD WRFD- DC- Meaning: Protocol version supported by the NodeB.
rotclVer 0 UNODE 010699 HSDPA This parameter is modified based on the actual
B WRFD- +MIMO protocol version of the NodeB when the NodeB
MOD 010698 HSPA+ protocol version upgrade, otherwise it will cause
UNODE Uplink features supported by the new protocol version
WRFD- unavailable.
B 010651 11.5Mbi
t/s per GUI Value Range: R99, R4, R5, R6, R7, R8, R9, R10,
WRFD- User R11
010652
HSDPA Unit: None
WRFD- over Iur Actual Value Range: R99, R4, R5, R6, R7, R8, R9,
010693
SRB R10, R11
WRFD- over Default Value: R9
010695 HSDPA
WRFD- DL
010694 64QAM
WRFD- +MIMO
010697 UL
WRFD- Layer 2
010696 Improve
ment
WRFD-
010686 UL
16QAM
WRFD-
140203 E-
DPCCH
WRFD-
Boostin
020126
g
WRFD-
DC-
010703
HSDPA
WRFD-
CPC -
010702
DTX /
WRFD- DRX
010689
HSPA+
WRFD- Uplink
010101 23
WRFD- Mbit/s
010687 per User
WRFD- Mobility
010685 Between
UMTS
WRFD- and LTE
010683 Phase 1
WRFD- HSPA+
010680 Downlin
WRFD- k
010681 84Mbit/
WRFD- s per
010618 User
WRFD- Enhance
0106140 d DRX
3 HSPA+
WRFD- Downlin
010636 k
WRFD- 42Mbps
010635 per User
3GPP
R9
Specific
ations
CPC -
HS-
SCCH
less
operatio
n
Downlin
k
Enhance
d L2
Downlin
k
64QAM
HSPA+
Downlin
k
28Mbps
per User
HSPA+
Downlin
k
21Mbps
per User
IMS
Signalin
g over
HSPA
HSUPA
2ms TTI
SRB
over
HSUPA
HSUPA
over Iur
NodeBP BSC691 ADD WRFD- DC- Meaning: Protocol version supported by the NodeB.
rotclVer 0 UNODE 010699 HSDPA This parameter is modified based on the actual
B WRFD- +MIMO protocol version of the NodeB when the NodeB
MOD 010698 HSPA+ protocol version upgrade, otherwise it will cause
UNODE Uplink features supported by the new protocol version
WRFD- unavailable.
B 010651 11.5Mbi
t/s per GUI Value Range: R99, R4, R5, R6, R7, R8, R9, R10,
WRFD- User R11
010652
HSDPA Unit: None
WRFD- over Iur Actual Value Range: R99, R4, R5, R6, R7, R8, R9,
010693
SRB R10, R11
WRFD- over Default Value: R9
010695 HSDPA
WRFD- DL
010694 64QAM
WRFD- +MIMO
010697 UL
WRFD- Layer 2
010696 Improve
ment
WRFD-
010686 UL
16QAM
WRFD-
140203 E-
DPCCH
WRFD-
Boostin
020126
g
WRFD-
DC-
010703
HSDPA
WRFD-
CPC -
010702
DTX /
WRFD- DRX
010689
HSPA+
WRFD- Uplink
010101 23
WRFD- Mbit/s
010687 per User
WRFD- Mobility
010685 Between
UMTS
WRFD- and LTE
010683 Phase 1
WRFD- HSPA+
010680 Downlin
WRFD- k
010681 84Mbit/
WRFD- s per
010618 User
WRFD- Enhance
0106140 d DRX
3 HSPA+
WRFD- Downlin
010636 k
WRFD- 42Mbps
010635 per User
3GPP
R9
Specific
ations
CPC -
HS-
SCCH
less
operatio
n
Downlin
k
Enhance
d L2
Downlin
k
64QAM
HSPA+
Downlin
k
28Mbps
per User
HSPA+
Downlin
k
21Mbps
per User
IMS
Signalin
g over
HSPA
HSUPA
2ms TTI
SRB
over
HSUPA
HSUPA
over Iur
FACHM BSC690 ADD None None Meaning: Whether a UE in the CELL_FACH state
easInd 0 UCELL performs inter-frequency or inter-RAT measurements.
MEAS If "InterFreqInterRatMeasInd" is set to
MOD NOT_REQUIRE, this parameter does not need to be
UCELL set. If "InterFreqInterRatMeasInd" is set to
MEAS INTER_FREQ or INTER_RAT, this parameter can be
set to NOT_REQUIRE or REQUIRE. If
"InterFreqInterRatMeasInd" is set to
INTER_FREQ_AND_INTER_RAT, this parameter
can be set to NOT_REQUIRE, INTER_FREQ,
INTER_RAT, or INTER_FREQ_AND_INTER_RAT.
GUI Value Range: REQUIRE, NOT_REQUIRE,
INTER_FREQ, INTER_RAT,
INTER_FREQ_AND_INTER_RAT
Unit: None
Actual Value Range: REQUIRE, NOT_REQUIRE,
INTER_FREQ, INTER_RAT,
INTER_FREQ_AND_INTER_RAT
Default Value: INTER_FREQ_AND_INTER_RAT
FACHM BSC691 ADD None None Meaning: Whether a UE in the CELL_FACH state
easInd 0 UCELL performs inter-frequency or inter-RAT measurements.
MEAS If "InterFreqInterRatMeasInd" is set to
MOD NOT_REQUIRE, this parameter does not need to be
UCELL set. If "InterFreqInterRatMeasInd" is set to
MEAS INTER_FREQ or INTER_RAT, this parameter can be
set to NOT_REQUIRE or REQUIRE. If
"InterFreqInterRatMeasInd" is set to
INTER_FREQ_AND_INTER_RAT, this parameter
can be set to NOT_REQUIRE, INTER_FREQ,
INTER_RAT, or INTER_FREQ_AND_INTER_RAT.
GUI Value Range: REQUIRE, NOT_REQUIRE,
INTER_FREQ, INTER_RAT,
INTER_FREQ_AND_INTER_RAT
Unit: None
Actual Value Range: REQUIRE, NOT_REQUIRE,
INTER_FREQ, INTER_RAT,
INTER_FREQ_AND_INTER_RAT
Default Value: INTER_FREQ_AND_INTER_RAT
LTECell BSC690 ADD WRFD- PS Meaning: This parameter specifies the index that
Index 0 ULTEC 020129 Service uniquely identifies an LTE cell.
ELL WRFD- Redirect GUI Value Range: 0~65535
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 0~65535
LTECell BSC691 ADD WRFD- PS Meaning: This parameter specifies the index that
Index 0 ULTEC 020129 Service uniquely identifies an LTE cell.
ELL WRFD- Redirect GUI Value Range: 0~65535
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 0~65535
LTECell BSC690 ADD WRFD- PS Meaning: This parameter specifies the cell name that
Name 0 ULTEC 020129 Service uniquely identifies an LTE cell.
ELL WRFD- Redirect GUI Value Range: 1~64 characters
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 1~64 characters
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
LTECell BSC691 ADD WRFD- PS Meaning: This parameter specifies the cell name that
Name 0 ULTEC 020129 Service uniquely identifies an LTE cell.
ELL WRFD- Redirect GUI Value Range: 1~64 characters
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 1~64 characters
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
EUTRA BSC690 ADD WRFD- PS Meaning: This parameter is used to uniquely identify
NCELLI 0 ULTEC 020129 Service an LTE cell in the PLMN. EutranCellId consists of
D ELL WRFD- Redirect eNodeBID of 20 bits and CellID of 8 bits, that is
MOD 020126 ion from EutranCellId=eNodeBID x 256 + CellID. For details
ULTEC UMTS about the parameter description, see 3GPP TS 36.300.
ELL to LTE GUI Value Range: 0~268435455
Mobility Unit: None
Between
UMTS Actual Value Range: 0~268435455
and LTE Default Value: None
Phase 1
EUTRA BSC691 ADD WRFD- PS Meaning: This parameter is used to uniquely identify
NCELLI 0 ULTEC 020129 Service an LTE cell in the PLMN. EutranCellId consists of
D ELL WRFD- Redirect eNodeBID of 20 bits and CellID of 8 bits, that is
MOD 020126 ion from EutranCellId=eNodeBID x 256 + CellID. For details
ULTEC UMTS about the parameter description, see 3GPP TS 36.300.
ELL to LTE GUI Value Range: 0~268435455
Mobility Unit: None
Between
UMTS Actual Value Range: 0~268435455
and LTE Default Value: None
Phase 1
MCC BSC690 ADD WRFD- PS Meaning: This parameter uniquely identifies the
0 ULTEC 020129 Service country of the LTE cell's primary operator.
ELL WRFD- Redirect GUI Value Range: 3 digits
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 3 digits
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
MCC BSC691 ADD WRFD- PS Meaning: This parameter uniquely identifies the
0 ULTEC 020129 Service country of the LTE cell's primary operator.
ELL WRFD- Redirect GUI Value Range: 3 digits
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 3 digits
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
MNC BSC690 ADD WRFD- PS Meaning: This parameter uniquely identifies the
0 ULTEC 020129 Service network of the LTE's primary operator.
ELL WRFD- Redirect GUI Value Range: 2~3 digits
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 2~3 digits
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
MNC BSC691 ADD WRFD- PS Meaning: This parameter uniquely identifies the
0 ULTEC 020129 Service network of the LTE's primary operator.
ELL WRFD- Redirect GUI Value Range: 2~3 digits
MOD 020126 ion from
UMTS Unit: None
ULTEC
ELL to LTE Actual Value Range: 2~3 digits
Mobility Default Value: None
Between
UMTS
and LTE
Phase 1
TAC BSC690 ADD WRFD- PS Meaning: This parameter specifies Tracking Area
0 ULTEC 020129 Service Code (TAC) of a cell. In principle, base stations in an
ELL WRFD- Redirect area are managed by an MME in specialized charge of
MOD 020126 ion from the area. The TAC of each cell under these base
ULTEC UMTS stations is recorded in the MME. "TAC" in this area
ELL to LTE should be configured within the value range. For
Mobility details about this parameter, see 3GPP TS 23.003.
Between GUI Value Range: 0~65535
UMTS Unit: None
and LTE
Phase 1 Actual Value Range: 0~65535
Default Value: None
TAC BSC691 ADD WRFD- PS Meaning: This parameter specifies Tracking Area
0 ULTEC 020129 Service Code (TAC) of a cell. In principle, base stations in an
ELL WRFD- Redirect area are managed by an MME in specialized charge of
MOD 020126 ion from the area. The TAC of each cell under these base
ULTEC UMTS stations is recorded in the MME. "TAC" in this area
ELL to LTE should be configured within the value range. For
Mobility details about this parameter, see 3GPP TS 23.003.
Between GUI Value Range: 0~65535
UMTS Unit: None
and LTE
Phase 1 Actual Value Range: 0~65535
Default Value: None
CellPH BSC690 ADD WRFD- PS Meaning: This parameter specifies the physical cell
YID 0 ULTEC 020129 Service identity of an LTE cell. For detailed description of the
ELL WRFD- Redirect parameter, see 3GPP TS 36.331.
MOD 020126 ion from GUI Value Range: 0~503
ULTEC UMTS
to LTE Unit: None
ELL
Mobility Actual Value Range: 0~503
Between Default Value: None
UMTS
and LTE
Phase 1
CellPH BSC691 ADD WRFD- PS Meaning: This parameter specifies the physical cell
YID 0 ULTEC 020129 Service identity of an LTE cell. For detailed description of the
ELL WRFD- Redirect parameter, see 3GPP TS 36.331.
MOD 020126 ion from GUI Value Range: 0~503
ULTEC UMTS
to LTE Unit: None
ELL
Mobility Actual Value Range: 0~503
Between Default Value: None
UMTS
and LTE
Phase 1
Unit: None
Actual Value Range: 1~43
Default Value: None
Unit: None
Actual Value Range: 1~43
Default Value: None
U2LRim BSC690 ADD WRFD- Load Meaning: Index of an operator, which is used to select
CNOper 0 ULTEC 150216 Based an Iu-PS interface for transmitting messages in the
atorRTI ELL WRFD- PS UMTS-to-LTE RIM procedure. The parameter can be
ndex MOD 020129 Redirect set to 0, 1, 2, 3, or 255. Values 0 to 3 are indexes of
ULTEC ion from different Iu-PS interfaces, and value 255 indicates that
WRFD- UMTS the index is invalid. Before sending a RIM message to
ELL 140218 to LTE an LTE cell, the RNC first selects the PLMN from the
WRFD- PS CnOpGrpIndex that can transmit the RIM message to
150217 Service the LTE cell. If a primary operator is configured, the
Redirect RNC selects the PLMN of the primary operator.
ion from Otherwise, the RNC selects the first PLMN in the
UMTS operator group. The RNC then uses the Iu-PS
to LTE interface of the selected PLMN to transmit the RIM
message. If the PLMN has no Iu-PS interface, the
Service- RIM message cannot be transmitted.
Based
PS GUI Value Range: 0~3;255
Handov Unit: None
er from Actual Value Range: 0~3, 255
UMTS
to LTE Default Value: 255
Load
Based
PS
Handov
er from
UMTS
to LTE
U2LRim BSC691 ADD WRFD- Load Meaning: Index of an operator, which is used to select
CNOper 0 ULTEC 150216 Based an Iu-PS interface for transmitting messages in the
atorRTI ELL WRFD- PS UMTS-to-LTE RIM procedure. The parameter can be
ndex MOD 020129 Redirect set to 0, 1, 2, 3, or 255. Values 0 to 3 are indexes of
ULTEC ion from different Iu-PS interfaces, and value 255 indicates that
WRFD- UMTS the index is invalid. Before sending a RIM message to
ELL 140218 to LTE an LTE cell, the RNC first selects the PLMN from the
WRFD- PS CnOpGrpIndex that can transmit the RIM message to
150217 Service the LTE cell. If a primary operator is configured, the
Redirect RNC selects the PLMN of the primary operator.
ion from Otherwise, the RNC selects the first PLMN in the
UMTS operator group. The RNC then uses the Iu-PS
to LTE interface of the selected PLMN to transmit the RIM
message. If the PLMN has no Iu-PS interface, the
Service- RIM message cannot be transmitted.
Based
PS GUI Value Range: 0~3;255
Handov Unit: None
er from Actual Value Range: 0~3, 255
UMTS
to LTE Default Value: 255
Load
Based
PS
Handov
er from
UMTS
to LTE
TAC BSC690 ADD WRFD- Termina Meaning: Type Allocation Code (TAC) is proportion
0 UIMEIT 160103 l Black of the International Mobile Station Equipment Identity
AC WRFD- List (IMEI) and represent the first eight digits of the IMEI.
MOD 020500 Enhance TAC is used to differentiate between the MSs of
UIMEIT d Fast different models. This parameter consists of an eight
AC Dorman digit string. If the string is less than eight digits, the
cy system fills the higher orders with 0s to achieve an
RMV eight digit string.
UIMEIT
AC GUI Value Range: 0~99999999
Unit: None
Actual Value Range: 0~99999999
Default Value: None
TAC BSC691 ADD WRFD- Termina Meaning: Type Allocation Code (TAC) is proportion
0 UIMEIT 160103 l Black of the International Mobile Station Equipment Identity
AC WRFD- List (IMEI) and represent the first eight digits of the IMEI.
MOD 020500 Enhance TAC is used to differentiate between the MSs of
UIMEIT d Fast different models. This parameter consists of an eight
AC Dorman digit string. If the string is less than eight digits, the
cy system fills the higher orders with 0s to achieve an
RMV eight digit string.
UIMEIT
AC GUI Value Range: 0~99999999
Unit: None
Actual Value Range: 0~99999999
Default Value: None
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH, PERFENH_QOS_ENHANCE_SWITCH,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH,
PERFENH_PS_STRM_HIGHRATE_SWITCH,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH,
PERFENH_IUUP2_AMR_MBR_LIMIT_SWITCH,
PERFENH_AMR_RATESET_SYMMETRY_SWITC
H,
PERFENH_IUUP2_AMR_RATESET_COMP_SWIT
CH,
PERFENH_IUUP2_AMR_RATESET_SRELOC_SW
ITCH
Unit: None
Actual Value Range:
PERFENH_MR_AGPS_FAIL_CELLID_RTT_SWIT
CH,
PERFENH_RRC_REDIR_PS_IDENTIFY_OPT_SWI
TCH,
PERFENH_RRC_REDIR_PS_INCLUDE_R5_SWIT
CH,
PERFENH_REDIR_OTHER_FB_TO_U2100_SWIT
CH,
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH, PERFENH_QOS_ENHANCE_SWITCH,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH,
PERFENH_PS_STRM_HIGHRATE_SWITCH,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH,
PERFENH_IUUP2_AMR_MBR_LIMIT_SWITCH,
PERFENH_AMR_RATESET_SYMMETRY_SWITC
H,
PERFENH_IUUP2_AMR_RATESET_COMP_SWIT
CH,
PERFENH_IUUP2_AMR_RATESET_SRELOC_SW
ITCH
Default Value:
PERFENH_MR_AGPS_FAIL_CELLID_RTT_SWIT
CH:0,
PERFENH_RRC_REDIR_PS_IDENTIFY_OPT_SWI
TCH:0,
PERFENH_RRC_REDIR_PS_INCLUDE_R5_SWIT
CH:0,
PERFENH_REDIR_OTHER_FB_TO_U2100_SWIT
CH:0,
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H:0,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH:0,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH:1, PERFENH_QOS_ENHANCE_SWITCH:0,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH:0,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH:1,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH:
0,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH:1,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH:0,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH:0,
PERFENH_PS_STRM_HIGHRATE_SWITCH:0,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH:0,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH:0,
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH, PERFENH_QOS_ENHANCE_SWITCH,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH,
PERFENH_PS_STRM_HIGHRATE_SWITCH,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH,
PERFENH_IUUP2_AMR_MBR_LIMIT_SWITCH,
PERFENH_AMR_RATESET_SYMMETRY_SWITC
H,
PERFENH_IUUP2_AMR_RATESET_COMP_SWIT
CH,
PERFENH_IUUP2_AMR_RATESET_SRELOC_SW
ITCH
Unit: None
Actual Value Range:
PERFENH_MR_AGPS_FAIL_CELLID_RTT_SWIT
CH,
PERFENH_RRC_REDIR_PS_IDENTIFY_OPT_SWI
TCH,
PERFENH_RRC_REDIR_PS_INCLUDE_R5_SWIT
CH,
PERFENH_REDIR_OTHER_FB_TO_U2100_SWIT
CH,
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH, PERFENH_QOS_ENHANCE_SWITCH,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH,
PERFENH_PS_STRM_HIGHRATE_SWITCH,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH,
PERFENH_IUUP2_AMR_MBR_LIMIT_SWITCH,
PERFENH_AMR_RATESET_SYMMETRY_SWITC
H,
PERFENH_IUUP2_AMR_RATESET_COMP_SWIT
CH,
PERFENH_IUUP2_AMR_RATESET_SRELOC_SW
ITCH
Default Value:
PERFENH_MR_AGPS_FAIL_CELLID_RTT_SWIT
CH:0,
PERFENH_RRC_REDIR_PS_IDENTIFY_OPT_SWI
TCH:0,
PERFENH_RRC_REDIR_PS_INCLUDE_R5_SWIT
CH:0,
PERFENH_REDIR_OTHER_FB_TO_U2100_SWIT
CH:0,
PERFENH_NR_OF_DL_CHLCODES_OPT_SWITC
H:0,
PERFENH_SRNSR_IUB_DM_TERMIN_OPT_SWI
TCH:0,
PERFENH_INTERRAT_HO_PENALTY_OPT_SWI
TCH:1, PERFENH_QOS_ENHANCE_SWITCH:0,
PERFENH_SRB_D2H_BASE_COVER_LOAD_SWI
TCH:0,
PERFENH_SRB_H2D_CODE_JUDGE_SWITCH:1,
PERFENH_HOPRIOMEASTIMER_OPT_SWITCH:
0,
PERFENH_1X_MC_SETUP_DEA_CM_SWITCH:1,
PERFENH_VOICE_DEEPCOVER_ULRMA_OPT_
SWITCH:0,
PERFENH_CSPS_CACFAIL_PSBE_DOWN_0K_S
WITCH:0,
PERFENH_PS_STRM_HIGHRATE_SWITCH:0,
PERFENH_CACFAIL_RRC_REDIR_PROTECT_S
WITCH:0,
PERFENH_RRCDRD_CELL_RANDOM_SEL_SWI
TCH:0,
UlLdrTr BSC690 ADD WRFD- Load Meaning: Threshold for triggering uplink LDR. If the
igThd 0 UCELL 020102 Measure ratio of the uplink load to the uplink capacity is higher
LDM WRFD- ment than or equal to this threshold for a duration longer
MOD 020103 Inter than that specified by the "UlLdTrnsHysTime"
UCELL Frequen parameter, uplink LDR (preliminary congestion state)
WRFD- is triggered and LDR actions are performed to reduce
LDM 020106 cy Load
Balance the cell load. The recommended value difference
between "UlLdrRelThd" and "UlLdrTrigThd" is
Load higher than 10% because the load fluctuates.
Reshuffl Otherwise, a cell frequently enters and leaves the
ing preliminary congestion state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 55
UlLdrTr BSC691 ADD WRFD- Load Meaning: Threshold for triggering uplink LDR. If the
igThd 0 UCELL 020102 Measure ratio of the uplink load to the uplink capacity is higher
LDM WRFD- ment than or equal to this threshold for a duration longer
MOD 020103 Inter than that specified by the "UlLdTrnsHysTime"
UCELL Frequen parameter, uplink LDR (preliminary congestion state)
WRFD- is triggered and LDR actions are performed to reduce
LDM 020106 cy Load
Balance the cell load. The recommended value difference
between "UlLdrRelThd" and "UlLdrTrigThd" is
Load higher than 10% because the load fluctuates.
Reshuffl Otherwise, a cell frequently enters and leaves the
ing preliminary congestion state.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 55
DlLdrTr BSC690 ADD WRFD- Load Meaning: Threshold for triggering downlink LDR. If
igThd 0 UCELL 020102 Measure the ratio of the downlink load to the downlink
LDM WRFD- ment capacity is higher than or equal to this threshold for a
MOD 020103 Inter duration longer than that specified by the
UCELL Frequen "DlLdTrnsHysTime" parameter, downlink LDR
WRFD- (preliminary congestion state) is triggered and LDR
LDM 020117 cy Load
Balance actions are performed to reduce the cell load. The
WRFD- recommended value difference between
020106 Multi- "DlLdrRelThd" and "DlLdrTrigThd" is higher than
Carrier 10% because the load fluctuates. Otherwise, a cell
WRFD- Switch
020122 frequently enters and leaves the preliminary
off congestion state.
Based
on GUI Value Range: 0~100
Traffic Unit: %
Load Actual Value Range: 0~100
Load Default Value: 70
Reshuffl
ing
Multi-
Carrier
Switch
off
Based
on QoS
DlLdrTr BSC691 ADD WRFD- Load Meaning: Threshold for triggering downlink LDR. If
igThd 0 UCELL 020102 Measure the ratio of the downlink load to the downlink
LDM WRFD- ment capacity is higher than or equal to this threshold for a
MOD 020103 Inter duration longer than that specified by the
UCELL Frequen "DlLdTrnsHysTime" parameter, downlink LDR
WRFD- (preliminary congestion state) is triggered and LDR
LDM 020117 cy Load
Balance actions are performed to reduce the cell load. The
WRFD- recommended value difference between
020106 Multi- "DlLdrRelThd" and "DlLdrTrigThd" is higher than
Carrier 10% because the load fluctuates. Otherwise, a cell
WRFD- Switch
020122 frequently enters and leaves the preliminary
off congestion state.
Based
on GUI Value Range: 0~100
Traffic Unit: %
Load Actual Value Range: 0~100
Load Default Value: 70
Reshuffl
ing
Multi-
Carrier
Switch
off
Based
on QoS
UlLdrB BSC690 ADD WRFD- Dynami Meaning: Number of RABs selected in a UL LDR BE
ERateRe 0 UCELL 021101 c traffic rate reduction.
duction LDR WRFD- Channel GUI Value Range: 1~10
RabNu MOD 020106 Configu
m ration Unit: None
UCELL
LDR Control Actual Value Range: 1~10
(DCCC) Default Value: 1
Load
Reshuffl
ing
UlLdrB BSC691 ADD WRFD- Dynami Meaning: Number of RABs selected in a UL LDR BE
ERateRe 0 UCELL 021101 c traffic rate reduction.
duction LDR WRFD- Channel GUI Value Range: 1~10
RabNu MOD 020106 Configu
m ration Unit: None
UCELL
LDR Control Actual Value Range: 1~10
(DCCC) Default Value: 1
Load
Reshuffl
ing
UlLdrPs BSC690 ADD WRFD- RAB Meaning: Number of RABs selected in a UL LDR
RTQosR 0 UCELL 010506 Quality uncontrolled real-time traffic QoS renegotiation. The
enegRab LDR WRFD- of target users of this parameter are the PS domain real-
Num MOD 020106 Service time users. The setting of this parameter is similar to
UCELL Renegot the setting of BE service rate reduction user number.
LDR iation Considering the scenario where the candidate users
over Iu selected for DL LDR do not meet the QoS
Interface renegotiation conditions, you need to leave some
Load margin when setting this parameter to ensure the
Reshuffl success of LDR.
ing GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 1
UlLdrPs BSC691 ADD WRFD- RAB Meaning: Number of RABs selected in a UL LDR
RTQosR 0 UCELL 010506 Quality uncontrolled real-time traffic QoS renegotiation. The
enegRab LDR WRFD- of target users of this parameter are the PS domain real-
Num MOD 020106 Service time users. The setting of this parameter is similar to
UCELL Renegot the setting of BE service rate reduction user number.
LDR iation Considering the scenario where the candidate users
over Iu selected for DL LDR do not meet the QoS
Interface renegotiation conditions, you need to leave some
Load margin when setting this parameter to ensure the
Reshuffl success of LDR.
ing GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 1
UlCSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the CS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed. Because the CS domain users are session
LDR Handov users in general and they have little impact on load,
er Based you can set this parameter to a comparatively larger
on Load value.
GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 3
UlCSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the CS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed. Because the CS domain users are session
LDR Handov users in general and they have little impact on load,
er Based you can set this parameter to a comparatively larger
on Load value.
GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 3
UlPSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a UL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the PS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
UlPSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a UL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the PS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
UlLdrA BSC690 ADD WRFD- Load Meaning: Number of RABs selected in a UL LDR
MRRate 0 UCELL 020106 Reshuffl AMR traffic rate reduction.
Reducti LDR WRFD- ing GUI Value Range: 1~10
onRabN MOD 020701 AMR/W
um Unit: None
UCELL B-AMR
LDR Speech Actual Value Range: 1~10
Rates Default Value: 1
Control
UlLdrA BSC691 ADD WRFD- Load Meaning: Number of RABs selected in a UL LDR
MRRate 0 UCELL 020106 Reshuffl AMR traffic rate reduction.
Reducti LDR WRFD- ing GUI Value Range: 1~10
onRabN MOD 020701 AMR/W
um Unit: None
UCELL B-AMR
LDR Speech Actual Value Range: 1~10
Rates Default Value: 1
Control
UlCSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the CS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
UlCSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the CS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
UlPSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a UL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the PS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
UlPSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a UL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the PS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
UlInterF BSC690 ADD WRFD- Inter Meaning: Cell UL load remaining space limit for
reqHoC 0 UCELL 020103 Frequen load-based inter-frequency handovers. In the load-
ellLoad LDR WRFD- cy Load based inter-frequency handovers involved in LDR
SpaceTh MOD 020106 Balance triggered by basic congestions in the uplink, the inter-
d UCELL Load frequency neighboring cell can be selected as the
LDR Reshuffl target cell of the handover only when the uplink load
ing remaining space of the cell is larger than this
parameter value.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 20
UlInterF BSC691 ADD WRFD- Inter Meaning: Cell UL load remaining space limit for
reqHoC 0 UCELL 020103 Frequen load-based inter-frequency handovers. In the load-
ellLoad LDR WRFD- cy Load based inter-frequency handovers involved in LDR
SpaceTh MOD 020106 Balance triggered by basic congestions in the uplink, the inter-
d UCELL Load frequency neighboring cell can be selected as the
LDR Reshuffl target cell of the handover only when the uplink load
ing remaining space of the cell is larger than this
parameter value.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 20
DlInterF BSC690 ADD WRFD- Inter Meaning: Cell DL load remaining space limit for
reqHoC 0 UCELL 020103 Frequen load-based inter-frequency handovers. In a load-based
ellLoad LDR WRFD- cy Load inter-frequency handover with LDR triggered by basic
SpaceTh MOD 020106 Balance congestions in the uplink, the inter-frequency
d UCELL Load neighboring cell can be selected as the target cell of
LDR Reshuffl the handover only when the DL load remaining space
ing of the cell is larger than the value of this parameter.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 20
DlInterF BSC691 ADD WRFD- Inter Meaning: Cell DL load remaining space limit for
reqHoC 0 UCELL 020103 Frequen load-based inter-frequency handovers. In a load-based
ellLoad LDR WRFD- cy Load inter-frequency handover with LDR triggered by basic
SpaceTh MOD 020106 Balance congestions in the uplink, the inter-frequency
d UCELL Load neighboring cell can be selected as the target cell of
LDR Reshuffl the handover only when the DL load remaining space
ing of the cell is larger than the value of this parameter.
GUI Value Range: 0~100
Unit: %
Actual Value Range: 0~100
Default Value: 20
UlInterF BSC690 ADD WRFD- Inter- Meaning: Upper UL bandwidth limit for load-based
reqHoB 0 UCELL 140217 Frequen inter-frequency handovers. The UE can be selected to
WThd LDR WRFD- cy Load perform load-based inter-frequency handovers only
MOD 020106 Balancin when its bandwidth is less than this threshold.
UCELL g Based GUI Value Range: 0~400000
WRFD- on
LDR 020103 Unit: bit/s
Configu
rable Actual Value Range: 0~400000
Load Default Value: 200000
Threshol
d
Load
Reshuffl
ing
Inter
Frequen
cy Load
Balance
UlInterF BSC691 ADD WRFD- Inter- Meaning: Upper UL bandwidth limit for load-based
reqHoB 0 UCELL 140217 Frequen inter-frequency handovers. The UE can be selected to
WThd LDR WRFD- cy Load perform load-based inter-frequency handovers only
MOD 020106 Balancin when its bandwidth is less than this threshold.
UCELL g Based GUI Value Range: 0~400000
WRFD- on
LDR 020103 Unit: bit/s
Configu
rable Actual Value Range: 0~400000
Load Default Value: 200000
Threshol
d
Load
Reshuffl
ing
Inter
Frequen
cy Load
Balance
DlInterF BSC690 ADD WRFD- Inter- Meaning: Upper DL bandwidth limit for load-based
reqHoB 0 UCELL 140217 Frequen inter-frequency handovers. The UE can be selected to
WThd LDR WRFD- cy Load perform load-based inter-frequency handovers only
MOD 020106 Balancin when its bandwidth is less than this threshold.
UCELL g Based GUI Value Range: 0~400000
WRFD- on
LDR 020103 Unit: bit/s
Configu
rable Actual Value Range: 0~400000
Load Default Value: 200000
Threshol
d
Load
Reshuffl
ing
Inter
Frequen
cy Load
Balance
DlInterF BSC691 ADD WRFD- Inter- Meaning: Upper DL bandwidth limit for load-based
reqHoB 0 UCELL 140217 Frequen inter-frequency handovers. The UE can be selected to
WThd LDR WRFD- cy Load perform load-based inter-frequency handovers only
MOD 020106 Balancin when its bandwidth is less than this threshold.
UCELL g Based GUI Value Range: 0~400000
WRFD- on
LDR 020103 Unit: bit/s
Configu
rable Actual Value Range: 0~400000
Load Default Value: 200000
Threshol
d
Load
Reshuffl
ing
Inter
Frequen
cy Load
Balance
MbmsD BSC690 ADD WRFD- MBMS Meaning: When the priority of the RAB of MBMS
ecPower 0 UCELL 0106160 Load services exceeds this threshold, reconfigure the
RabThd LDR 3 Control MBMS power to the minimum power. The MBMS
MOD WRFD- Load service at each rate is set on the basis of two power
UCELL 020106 Reshuffl levels. The power set for an MBMS service is
LDR ing determined according to cell load during the service
access. In addition, the FACH power of the MBMS
service must be decreased as required in the duration
of cell congestion. a part of services with high priority,
for example the disaster pre-alert, however, do not
need the coverage shrink caused by cell load. In such
a case, you can adjust the service priority threshold to
protect the services with high priority against the
impact of the service access failure and the load
control algorithm.
GUI Value Range: 1~15
Unit: None
Actual Value Range: 1~15
Default Value: 1
MbmsD BSC691 ADD WRFD- MBMS Meaning: When the priority of the RAB of MBMS
ecPower 0 UCELL 0106160 Load services exceeds this threshold, reconfigure the
RabThd LDR 3 Control MBMS power to the minimum power. The MBMS
MOD WRFD- Load service at each rate is set on the basis of two power
UCELL 020106 Reshuffl levels. The power set for an MBMS service is
LDR ing determined according to cell load during the service
access. In addition, the FACH power of the MBMS
service must be decreased as required in the duration
of cell congestion. Services with high priority, for
example the disaster pre-alert, however, do not need
the coverage shrink caused by cell load. In such a
case, you can adjust the service priority threshold to
protect the services with high priority against the
impact of the service access failure and the load
control algorithm.
GUI Value Range: 1~15
Unit: None
Actual Value Range: 1~15
Default Value: 1
CellLdr BSC690 ADD WRFD- Load Meaning: Threshold for reserved SF in a cell. This
SfResTh 0 UCELL 150216 Based parameter is used to determine whether the code load
d LDR WRFD- PS reshuffling (LDR) is allowed.
MOD 150217 Redirect GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16),
UCELL ion from SF32(SF32), SF64(SF64), SF128(SF128),
WRFD- UMTS
LDR 020108 SF256(SF256)
to LTE
WRFD- Unit: None
Load
150215 Based Actual Value Range: SF4, SF8, SF16, SF32, SF64,
WRFD- PS SF128, SF256
140226 Handov Default Value: SF8(SF8)
WRFD- er from
140102 UMTS
to LTE
WRFD-
020106 Code
Resourc
WRFD- e
150231 Manage
WRFD- ment
150219 SRVCC
WRFD- from
020126 LTE to
WRFD- UMTS
020103 with PS
Handov
WRFD- er
020129
Fast
WRFD- Return
140218 from
WRFD- UMTS
150220 to LTE
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
Load
Reshuffl
ing
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
Mobility
Between
UMTS
and LTE
Phase 1
Inter
Frequen
cy Load
Balance
PS
Service
Redirect
ion from
UMTS
to LTE
Service-
Based
PS
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
CellLdr BSC691 ADD WRFD- Load Meaning: Threshold for reserved SF in a cell. This
SfResTh 0 UCELL 150216 Based parameter is used to determine whether the code load
d LDR WRFD- PS reshuffling (LDR) is allowed.
MOD 150217 Redirect GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16),
UCELL ion from SF32(SF32), SF64(SF64), SF128(SF128),
WRFD- UMTS
LDR 020108 SF256(SF256)
to LTE
WRFD- Unit: None
Load
150215 Based Actual Value Range: SF4, SF8, SF16, SF32, SF64,
WRFD- PS SF128, SF256
140226 Handov Default Value: SF8(SF8)
WRFD- er from
140102 UMTS
to LTE
WRFD-
020106 Code
Resourc
WRFD- e
150231 Manage
WRFD- ment
150219 SRVCC
WRFD- from
020126 LTE to
WRFD- UMTS
020103 with PS
Handov
WRFD- er
020129
Fast
WRFD- Return
140218 from
WRFD- UMTS
150220 to LTE
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
Load
Reshuffl
ing
RIM
Based
UMTS
Target
Cell
Selectio
n for
LTE
Coverag
e Based
PS
Redirect
ion from
UMTS
to LTE
Mobility
Between
UMTS
and LTE
Phase 1
Inter
Frequen
cy Load
Balance
PS
Service
Redirect
ion from
UMTS
to LTE
Service-
Based
PS
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
LdrCode BSC690 ADD WRFD- Code Meaning: Code priority indication for LDR. If this
PriUseIn 0 UCELL 020108 Resourc parameter is set to TRUE, the codes with a high
d LDR WRFD- e priority, that is the subtree with a large code number,
MOD 020106 Manage are reserved during the code reshuffling. This
UCELL ment facilitates code resource dynamic sharing for HSDPA
LDR Load services. If this parameter is set to FALSE, the subtree
Reshuffl with a minimum number of users is selected from the
ing candidate subtrees. If there are multiple subtrees with
a minimum number of users, the subtree with the
maximum code number is selected for code
reshuffling.
GUI Value Range: FALSE(FALSE), TRUE(TRUE)
Unit: None
Actual Value Range: FALSE, TRUE
Default Value: FALSE(FALSE)
LdrCode BSC691 ADD WRFD- Code Meaning: Code priority indication for LDR. If this
PriUseIn 0 UCELL 020108 Resourc parameter is set to TRUE, the codes with a high
d LDR WRFD- e priority, that is the subtree with a large code number,
MOD 020106 Manage are reserved during the code reshuffling. This
UCELL ment facilitates code resource dynamic sharing for HSDPA
LDR Load services. If this parameter is set to FALSE, the subtree
Reshuffl with a minimum number of users is selected from the
ing candidate subtrees. If there are multiple subtrees with
a minimum number of users, the subtree with the
maximum code number is selected for code
reshuffling.
GUI Value Range: FALSE(FALSE), TRUE(TRUE)
Unit: None
Actual Value Range: FALSE, TRUE
Default Value: FALSE(FALSE)
MaxUse BSC690 ADD WRFD- Code Meaning: Maximum number of users selected in code
rNumCo 0 UCELL 020108 Resourc reshuffling. Code reshuffling is triggered only when
deAdj LDR WRFD- e the number of users on a code is less than or equal to
MOD 020106 Manage this threshold. Code reshuffling has a severe impact
UCELL ment on the QoS. In addition, the reshuffled users occupy
LDR Load two code resources during code reshuffling.
Reshuffl Therefore, the parameter value 1 is recommended.
ing GUI Value Range: 1~3
Unit: None
Actual Value Range: 1~3
Default Value: 1
MaxUse BSC691 ADD WRFD- Code Meaning: Maximum number of users selected in code
rNumCo 0 UCELL 020108 Resourc reshuffling. Code reshuffling is triggered only when
deAdj LDR WRFD- e the number of users on a code is less than or equal to
MOD 020106 Manage this threshold. Code reshuffling has a severe impact
UCELL ment on the QoS. In addition, the reshuffled users occupy
LDR Load two code resources during code reshuffling.
Reshuffl Therefore, the parameter value 1 is recommended.
ing GUI Value Range: 1~3
Unit: None
Actual Value Range: 1~3
Default Value: 1
UlLdrCr BSC690 ADD WRFD- Inter Meaning: Reserved SF threshold in uplink credit
editSfRe 0 UCELL 020103 Frequen LDR. The uplink credit LDR could be triggered only
sThd LDR WRFD- cy Load when the SF factor corresponding to the uplink
MOD 020106 Balance remaining credit is higher than this threshold.
UCELL Load GUI Value Range: 8*SF4(8*SF4), 7*SF4(7*SF4),
LDR Reshuffl 6*SF4(6*SF4), 5*SF4(5*SF4), 4*SF4(4*SF4),
ing 3*SF4(3*SF4), 2*SF4(2*SF4), SF4(SF4), SF8(SF8),
SF16(SF16), SF32(SF32), SF64(SF64),
SF128(SF128), SF256(SF256)
Unit: None
Actual Value Range: 8*SF4, 7*SF4, 6*SF4, 5*SF4,
4*SF4, 3*SF4, 2*SF4, SF4, SF8, SF16, SF32, SF64,
SF128, SF256
Default Value: SF8(SF8)
UlLdrCr BSC691 ADD WRFD- Inter Meaning: Reserved SF threshold in uplink credit
editSfRe 0 UCELL 020103 Frequen LDR. The uplink credit LDR could be triggered only
sThd LDR WRFD- cy Load when the SF factor corresponding to the uplink
MOD 020106 Balance remaining credit is higher than this threshold.
UCELL Load GUI Value Range: 8*SF4(8*SF4), 7*SF4(7*SF4),
LDR Reshuffl 6*SF4(6*SF4), 5*SF4(5*SF4), 4*SF4(4*SF4),
ing 3*SF4(3*SF4), 2*SF4(2*SF4), SF4(SF4), SF8(SF8),
SF16(SF16), SF32(SF32), SF64(SF64),
SF128(SF128), SF256(SF256)
Unit: None
Actual Value Range: 8*SF4, 7*SF4, 6*SF4, 5*SF4,
4*SF4, 3*SF4, 2*SF4, SF4, SF8, SF16, SF32, SF64,
SF128, SF256
Default Value: SF8(SF8)
DlLdrCr BSC690 ADD WRFD- Load Meaning: Reserved SF threshold in DL credit LDR.
editSfRe 0 UCELL 020106 Reshuffl DL credit LDR is triggered when the SF value
sThd LDR ing corresponding to the DL remaining credit is greater
MOD than this threshold.
UCELL GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16),
LDR SF32(SF32), SF64(SF64), SF128(SF128),
SF256(SF256)
Unit: None
Actual Value Range: SF4, SF8, SF16, SF32, SF64,
SF128, SF256
Default Value: SF8(SF8)
DlLdrCr BSC691 ADD WRFD- Load Meaning: Reserved SF threshold in DL credit LDR.
editSfRe 0 UCELL 020106 Reshuffl DL credit LDR is triggered when the SF value
sThd LDR ing corresponding to the DL remaining credit is greater
MOD than this threshold.
UCELL GUI Value Range: SF4(SF4), SF8(SF8), SF16(SF16),
LDR SF32(SF32), SF64(SF64), SF128(SF128),
SF256(SF256)
Unit: None
Actual Value Range: SF4, SF8, SF16, SF32, SF64,
SF128, SF256
Default Value: SF8(SF8)
LdrCode BSC690 ADD WRFD- Inter Meaning: Code resource usage difference threshold.
UsedSpa 0 UCELL 020103 Frequen Inter-frequency handovers are triggered when the
ceThd LDR WRFD- cy Load difference between the resource usage of the current
MOD 020106 Balance cell and that of the target cell is greater than this
UCELL Load threshold.
LDR Reshuffl GUI Value Range: 0~100
ing Unit: %
Actual Value Range: 0~100
Default Value: 13
LdrCode BSC691 ADD WRFD- Inter Meaning: Code resource usage difference threshold.
UsedSpa 0 UCELL 020103 Frequen Inter-frequency handovers are triggered when the
ceThd LDR WRFD- cy Load difference between the resource usage of the current
MOD 020106 Balance cell and that of the target cell is greater than this
UCELL Load threshold.
LDR Reshuffl GUI Value Range: 0~100
ing Unit: %
Actual Value Range: 0~100
Default Value: 13
UMTS
to LTE
Mobility
Between
UMTS
and LTE
Phase 1
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
PS
Service
Redirect
ion from
UMTS
to LTE
Service-
Based
PS
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
UMTS
to LTE
Mobility
Between
UMTS
and LTE
Phase 1
CS
Fallback
Guarant
ee for
LTE
Emerge
ncy
Calls
PS
Service
Redirect
ion from
UMTS
to LTE
Service-
Based
PS
Handov
er from
UMTS
to LTE
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
GoldUse BSC690 ADD WRFD- Inter- Meaning: Whether gold users involve in the
rLoadCo 0 UCELL 140217 Frequen congestion control. According to the policy set for
ntrolSwi LDR WRFD- cy Load gold users by operators, if service quality of gold
tch MOD 020131 Balancin users should be guaranteed even in resource
UCELL g Based congestion, the switch should be turned off. If this
WRFD- on switch is turned on, LDR such as rate reduction and
LDR 020106 Configu handover also occurs on gold users even in cell
rable resource congestion, which impacts user service
Load quality. If this switch is disabled, no action is
Threshol performed on gold users.
d GUI Value Range: OFF(OFF), ON(ON)
Optimiz Unit: None
ation of
R99 and Actual Value Range: OFF, ON
HSUPA Default Value: OFF(OFF)
Users
Fairness
Load
Reshuffl
ing
GoldUse BSC691 ADD WRFD- Inter- Meaning: Whether gold users involve in the
rLoadCo 0 UCELL 140217 Frequen congestion control. According to the policy set for
ntrolSwi LDR WRFD- cy Load gold users by operators, if service quality of gold
tch MOD 020131 Balancin users should be guaranteed even in resource
UCELL g Based congestion, the switch should be turned off. If this
WRFD- on switch is turned on, LDR such as rate reduction and
LDR 020106 Configu handover also occurs on gold users even in cell
rable resource congestion, which impacts user service
Load quality. If this switch is disabled, no action is
Threshol performed on gold users.
d GUI Value Range: OFF(OFF), ON(ON)
Optimiz Unit: None
ation of
R99 and Actual Value Range: OFF, ON
HSUPA Default Value: OFF(OFF)
Users
Fairness
Load
Reshuffl
ing
InterFre BSC690 ADD WRFD- Inter Meaning: Forbidden traffic classes when inter-
qLdHoF 0 UCELL 020103 Frequen frequency handovers are performed. This parameter is
orbiden LDR WRFD- cy Load used to prevent the LDR action from disarranging the
TC MOD 020106 Balance original service steering sequence.
UCELL Load GUI Value Range: R99_CONVERSATIONAL(R99
LDR Reshuffl Conversational), R99_STREAMING(R99 Streaming),
ing R99_BE(R99 BE),
HSDPA_CONVERSATIONAL(HSDPA
Conversational), HSDPA_STREAMING(HSDPA
Streaming), HSDPA_BE(HSDPA BE),
HSPA_CONVERSATIONAL(HSPA Conversational),
HSPA_STREAMING(HSPA Streaming),
HSPA_BE(HSPA BE)
Unit: None
Actual Value Range: R99_CONVERSATIONAL,
R99_STREAMING, R99_BE,
HSDPA_CONVERSATIONAL,
HSDPA_STREAMING, HSDPA_BE,
HSPA_CONVERSATIONAL, HSPA_STREAMING,
HSPA_BE
Default Value: R99_CONVERSATIONAL:
0,R99_STREAMING:0,R99_BE:
0,HSDPA_CONVERSATIONAL:
0,HSDPA_STREAMING:0,HSDPA_BE:
0,HSPA_CONVERSATIONAL:
0,HSPA_STREAMING:0,HSPA_BE:0
InterFre BSC691 ADD WRFD- Inter Meaning: Forbidden traffic classes when inter-
qLdHoF 0 UCELL 020103 Frequen frequency handovers are performed. This parameter is
orbiden LDR WRFD- cy Load used to prevent the LDR action from disarranging the
TC MOD 020106 Balance original service steering sequence.
UCELL Load GUI Value Range: R99_CONVERSATIONAL(R99
LDR Reshuffl Conversational), R99_STREAMING(R99 Streaming),
ing R99_BE(R99 BE),
HSDPA_CONVERSATIONAL(HSDPA
Conversational), HSDPA_STREAMING(HSDPA
Streaming), HSDPA_BE(HSDPA BE),
HSPA_CONVERSATIONAL(HSPA Conversational),
HSPA_STREAMING(HSPA Streaming),
HSPA_BE(HSPA BE)
Unit: None
Actual Value Range: R99_CONVERSATIONAL,
R99_STREAMING, R99_BE,
HSDPA_CONVERSATIONAL,
HSDPA_STREAMING, HSDPA_BE,
HSPA_CONVERSATIONAL, HSPA_STREAMING,
HSPA_BE
Default Value: R99_CONVERSATIONAL:
0,R99_STREAMING:0,R99_BE:
0,HSDPA_CONVERSATIONAL:
0,HSDPA_STREAMING:0,HSDPA_BE:
0,HSPA_CONVERSATIONAL:
0,HSPA_STREAMING:0,HSPA_BE:0
UlTtiCr BSC690 ADD None None Meaning: The threshold of the reserved SF is used for
editSfRe 0 UCELL judging the uplink credit state for TTI switchover
sThd LDR decision. When uplink credit is lower than the
MOD threshold, the credit state of TTI switchover algorithm
UCELL is set to restricted. The smaller the parameter value is,
LDR the easier the credit state is set to restricted. The
threshold of the reserved SF is converted to credit by
DCH consumption law.
GUI Value Range: 8SF4(8SF4), 7SF4(7SF4),
6SF4(6SF4), 5SF4(5SF4), 4SF4(4SF4), 3SF4(3SF4),
2SF4(2SF4), SF4(SF4), SF8(SF8), SF16(SF16),
SF32(SF32), SF64(SF64), SF128(SF128),
SF256(SF256)
Unit: None
Actual Value Range: 8SF4, 7SF4, 6SF4, 5SF4, 4SF4,
3SF4, 2SF4, SF4, SF8, SF16, SF32, SF64, SF128,
SF256
Default Value: 4SF4(4SF4)
UlTtiCr BSC691 ADD None None Meaning: The threshold of the reserved SF is used for
editSfRe 0 UCELL judging the uplink credit state for TTI switchover
sThd LDR decision. When uplink credit is lower than the
MOD threshold, the credit state of TTI switchover algorithm
UCELL is set to restricted. The smaller the parameter value is,
LDR the easier the credit state is set to restricted. The
threshold of the reserved SF is converted to credit by
DCH consumption law.
GUI Value Range: 8SF4(8SF4), 7SF4(7SF4),
6SF4(6SF4), 5SF4(5SF4), 4SF4(4SF4), 3SF4(3SF4),
2SF4(2SF4), SF4(SF4), SF8(SF8), SF16(SF16),
SF32(SF32), SF64(SF64), SF128(SF128),
SF256(SF256)
Unit: None
Actual Value Range: 8SF4, 7SF4, 6SF4, 5SF4, 4SF4,
3SF4, 2SF4, SF4, SF8, SF16, SF32, SF64, SF128,
SF256
Default Value: 4SF4(4SF4)
DlLdrB BSC690 ADD WRFD- Dynami Meaning: Number of RABs selected in a DL LDR BE
ERateRe 0 UCELL 021101 c traffic rate reduction.
duction LDR WRFD- Channel GUI Value Range: 1~10
RabNu MOD 020106 Configu
m ration Unit: None
UCELL
LDR Control Actual Value Range: 1~10
(DCCC) Default Value: 1
Load
Reshuffl
ing
DlLdrB BSC691 ADD WRFD- Dynami Meaning: Number of RABs selected in a DL LDR BE
ERateRe 0 UCELL 021101 c traffic rate reduction.
duction LDR WRFD- Channel GUI Value Range: 1~10
RabNu MOD 020106 Configu
m ration Unit: None
UCELL
LDR Control Actual Value Range: 1~10
(DCCC) Default Value: 1
Load
Reshuffl
ing
DlLdrPs BSC690 ADD WRFD- RAB Meaning: Number of RABs selected in a DL LDR
RTQosR 0 UCELL 010506 Quality uncontrolled real-time traffic QoS renegotiation. The
enegRab LDR WRFD- of target users of this parameter are the PS domain real-
Num MOD 020106 Service time users. The setting of this parameter is similar to
UCELL Renegot the setting of BE service rate reduction user number.
LDR iation When the candidate users selected for DL LDR do not
over Iu meet the QoS renegotiation conditions, the number of
Interface users performing QoS renegotiation is smaller than the
Load value of this parameter. Therefore, leave some margin
Reshuffl when setting this parameter to ensure the success of
ing LDR.
GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 1
DlLdrPs BSC691 ADD WRFD- RAB Meaning: Number of RABs selected in a DL LDR
RTQosR 0 UCELL 010506 Quality uncontrolled real-time traffic QoS renegotiation. The
enegRab LDR WRFD- of target users of this parameter are the PS domain real-
Num MOD 020106 Service time users. The setting of this parameter is similar to
UCELL Renegot the setting of BE service rate reduction user number.
LDR iation When the candidate users selected for DL LDR do not
over Iu meet the QoS renegotiation conditions, the number of
Interface users performing QoS renegotiation is smaller than the
Load value of this parameter. Therefore, leave some margin
Reshuffl when setting this parameter to ensure the success of
ing LDR.
GUI Value Range: 1~10
Unit: None
Actual Value Range: 1~10
Default Value: 1
DlCSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR-CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the CS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
DlCSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR-CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the CS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
DlPSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR-PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the PS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
DlPSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR-PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDBE load handover. The
ouldBe LDR WRFD- ing target users of this parameter are the PS domain users
HOUeN MOD 020306 Inter- for whom "SHInd" is handover to GSM should be
um UCELL RAT performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
DlLdrA BSC690 ADD WRFD- Load Meaning: Number of RABs selected in a DL LDR-
MRRate 0 UCELL 020106 Reshuffl AMR voice service rate reduction.
Reducti LDR WRFD- ing GUI Value Range: 1~10
onRabN MOD 020701 AMR/W
um Unit: None
UCELL B-AMR
LDR Speech Actual Value Range: 1~10
Rates Default Value: 1
Control
DlLdrA BSC691 ADD WRFD- Load Meaning: Number of RABs selected in a DL LDR-
MRRate 0 UCELL 020106 Reshuffl AMR voice service rate reduction.
Reducti LDR WRFD- ing GUI Value Range: 1~10
onRabN MOD 020701 AMR/W
um Unit: None
UCELL B-AMR
LDR Speech Actual Value Range: 1~10
Rates Default Value: 1
Control
DlCSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the CS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
DlCSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR CS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the CS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 3
DlPSInt BSC690 ADD WRFD- Load Meaning: Number of users selected in a DL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the PS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
DlPSInt BSC691 ADD WRFD- Load Meaning: Number of users selected in a DL LDR PS
erRatSh 0 UCELL 020106 Reshuffl domain inter-RAT SHOULDNOTBE load handover.
ouldNot LDR WRFD- ing The target users of this parameter are the PS domain
HOUeN MOD 020306 Inter- users for whom "SHInd" is handover to GSM should
um UCELL RAT not be performed.
LDR Handov GUI Value Range: 1~10
er Based Unit: None
on Load
Actual Value Range: 1~10
Default Value: 1
DlLdrSe BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
condAct 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
ion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: InterFreqLDHO(inter-freq load
cy Load handover)
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrSe BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
condAct 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
ion LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: InterFreqLDHO(inter-freq load
MBMS handover)
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrTh BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
irdActio 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: BERateRed(BE traff rate reduction)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrTh BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
irdActio 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
n LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: BERateRed(BE traff rate reduction)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrFo BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
urthActi 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrFo BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
urthActi 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
on LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrFi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
fthActio 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrFi BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
fthActio 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
n LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrSi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
xthActio 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrSi BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
xthActio 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
n LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrSe BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
venthAc 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
tion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrSe BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
venthAc 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
tion LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrEi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
ghthActi 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrEi BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
ghthActi 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
on LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrNi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
nthActio 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrNi BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
nthActio 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
n LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrTe BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
nthActio 0 UCELL 150216 Based DlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from MBMSDecPower(MBMS descend power),
020106 UMTS CodeAdj(Code adjust), CSInterRatShouldNotLD-
to LTE HO(CS domain inter-rat should not be load handover),
WRFD- PSInterRatShouldNotLDHO(PS domain inter-rat
020108 Load
Based should not be load handover),
WRFD- GSM PSInterU2LLDHO(U2L PS Handover),
0106160 and WAMRSfReconfiguration(AMR-WB SF
3 UMTS reconfiguration)
WRFD- Handov Unit: None
021101 er Actual Value Range: NoAct, InterFreqLDHO,
WRFD- Enhance BERateRed, QoSRenego, CSInterRatShouldBeLD-
020701 ment HO, PSInterRatShouldBeLDHO, AMRRateRed,
Based MBMSDecPower, CodeAdj, CSInterRatShould-
WRFD-
on Iur-g NotLDHO, PSInterRatShouldNotLDHO,
020306
Inter PSInterU2LLDHO, WAMRSfReconfiguration
Frequen Default Value: NoAct(no action)
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrTe BSC691 ADD WRFD- Dynami Meaning: This parameter has the same content as
nthActio 0 UCELL 021101 c DlLdrFirstAction. The selected actions, however,
n LDR WRFD- Channel should be unique.
MOD 020108 Configu GUI Value Range: NoAct(no action),
UCELL ration InterFreqLDHO(inter-freq load handover),
WRFD- Control
LDR 020103 BERateRed(BE traff rate reduction),
(DCCC) QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Code negotiation), CSInterRatShouldBeLDHO(CS domain
010506 Resourc inter-rat should be load handover), PSInterRatShould-
WRFD- e BeLDHO(PS domain inter-rat should be load
020106 Manage handover), AMRRateRed(AMR traff rate reduction),
WRFD- ment MBMSDecPower(MBMS descend power),
0106160 Inter CodeAdj(Code adjust), CSInterRatShouldNotLD-
3 Frequen HO(CS domain inter-rat should not be load handover),
cy Load PSInterRatShouldNotLDHO(PS domain inter-rat
WRFD- should not be load handover),
020701 Balance
PSInterU2LLDHO(U2L PS Handover),
RAB WAMRSfReconfiguration(AMR-WB SF
Quality reconfiguration)
of
Service Unit: None
Renegot Actual Value Range: NoAct, InterFreqLDHO,
iation BERateRed, QoSRenego, CSInterRatShouldBeLD-
over Iu HO, PSInterRatShouldBeLDHO, AMRRateRed,
Interface MBMSDecPower, CodeAdj, CSInterRatShould-
Load NotLDHO, PSInterRatShouldNotLDHO,
Reshuffl PSInterU2LLDHO, WAMRSfReconfiguration
ing Default Value: NoAct(no action)
MBMS
Load
Control
AMR/W
B-AMR
Speech
Rates
Control
DlLdrEl BSC690 ADD WRFD- Load Meaning: Action different from that specified by
eventhA 0 UCELL 150216 Based DlLdrFirstAction.
ction LDR WRFD- PS GUI Value Range: NoAct(no action),
MOD 150217 Redirect InterFreqLDHO(inter-freq load handover),
UCELL ion from BERateRed(BE traff rate reduction),
WRFD- UMTS
LDR 070004 QoSRenego(uncontrolled real-time traff Qos re-
to LTE negotiation), CSInterRatShouldBeLDHO(CS domain
WRFD- Load inter-rat should be load handover), PSInterRatShould-
020701 Based BeLDHO(PS domain inter-rat should be load
WRFD- PS handover), AMRRateRed(AMR traff rate reduction),
020306 Handov MBMSDecPower(MBMS descend power),
er from CodeAdj(Code adjust), CSInterRatShouldNotLD-
UMTS HO(CS domain inter-rat should not be load handover),
to LTE PSInterRatShouldNotLDHO(PS domain inter-rat
Load should not be load handover),
Based PSInterU2LLDHO(U2L PS Handover),
GSM WAMRSfReconfiguration(AMR-WB SF
and reconfiguration)
UMTS Unit: None
Handov Actual Value Range: NoAct, InterFreqLDHO,
er BERateRed, QoSRenego, CSInterRatShouldBeLD-
Enhance HO, PSInterRatShouldBeLDHO, AMRRateRed,
ment MBMSDecPower, CodeAdj, CSInterRatShould-
Based NotLDHO, PSInterRatShouldNotLDHO,
on Iur-g PSInterU2LLDHO, WAMRSfReconfiguration
AMR/W Default Value: NoAct(no action)
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
DlLdrEl BSC691 ADD WRFD- Load Meaning: Action different from that specified by
eventhA 0 UCELL 150216 Based DlLdrFirstAction.
ction LDR WRFD- PS GUI Value Range: NoAct(no action),
MOD 150217 Redirect InterFreqLDHO(inter-freq load handover),
UCELL ion from BERateRed(BE traff rate reduction),
WRFD- UMTS
LDR 070004 QoSRenego(uncontrolled real-time traff Qos re-
to LTE negotiation), CSInterRatShouldBeLDHO(CS domain
WRFD- Load inter-rat should be load handover), PSInterRatShould-
020701 Based BeLDHO(PS domain inter-rat should be load
WRFD- PS handover), AMRRateRed(AMR traff rate reduction),
020306 Handov MBMSDecPower(MBMS descend power),
er from CodeAdj(Code adjust), CSInterRatShouldNotLD-
UMTS HO(CS domain inter-rat should not be load handover),
to LTE PSInterRatShouldNotLDHO(PS domain inter-rat
Load should not be load handover),
Based PSInterU2LLDHO(U2L PS Handover),
GSM WAMRSfReconfiguration(AMR-WB SF
and reconfiguration)
UMTS Unit: None
Handov Actual Value Range: NoAct, InterFreqLDHO,
er BERateRed, QoSRenego, CSInterRatShouldBeLD-
Enhance HO, PSInterRatShouldBeLDHO, AMRRateRed,
ment MBMSDecPower, CodeAdj, CSInterRatShould-
Based NotLDHO, PSInterRatShouldNotLDHO,
on Iur-g PSInterU2LLDHO, WAMRSfReconfiguration
AMR/W Default Value: NoAct(no action)
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSe BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
condAct 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
ion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: BERateRed(BE traff rate reduction)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSe BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
condAct 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
ion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: BERateRed(BE traff rate reduction)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrTh BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
irdActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrTh BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
irdActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrFo BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
urthActi 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrFo BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
urthActi 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrFi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
fthActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrFi BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
fthActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
xthActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSi BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
xthActio 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
n LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSe BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
venthAc 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
tion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrSe BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
venthAc 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
tion LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrEi BSC690 ADD WRFD- Load Meaning: This parameter has the same content as
ghthActi 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrEi BSC691 ADD WRFD- Load Meaning: This parameter has the same content as
ghthActi 0 UCELL 150216 Based UlLdrFirstAction. The selected actions, however,
on LDR WRFD- PS should be unique.
MOD 150217 Redirect GUI Value Range: NoAct(no action),
UCELL ion from InterFreqLDHO(inter-freq load handover),
WRFD- UMTS
LDR 070004 BERateRed(BE traff rate reduction),
to LTE QoSRenego(uncontrolled real-time traff Qos re-
WRFD- Load negotiation), CSInterRatShouldBeLDHO(CS domain
020103 Based inter-rat should be load handover), PSInterRatShould-
WRFD- PS BeLDHO(PS domain inter-rat should be load
010506 Handov handover), AMRRateRed(AMR traff rate reduction),
WRFD- er from CSInterRatShouldNotLDHO(CS domain inter-rat
020106 UMTS should not be load handover), PSInterRatShould-
to LTE NotLDHO(PS domain inter-rat should not be load
WRFD- handover), PSInterU2LLDHO(U2L PS Handover)
020108 Load
Based Unit: None
WRFD- GSM
0106160 Actual Value Range: NoAct, InterFreqLDHO,
and BERateRed, QoSRenego, CSInterRatShouldBeLD-
3 UMTS HO, PSInterRatShouldBeLDHO, AMRRateRed,
WRFD- Handov CSInterRatShouldNotLDHO, PSInterRatShould-
021101 er NotLDHO, PSInterU2LLDHO
WRFD- Enhance
ment Default Value: NoAct(no action)
020701
Based
WRFD-
on Iur-g
020306
Inter
Frequen
cy Load
Balance
RAB
Quality
of
Service
Renegot
iation
over Iu
Interface
Load
Reshuffl
ing
Code
Resourc
e
Manage
ment
MBMS
Load
Control
Dynami
c
Channel
Configu
ration
Control
(DCCC)
AMR/W
B-AMR
Speech
Rates
Control
Inter-
RAT
Handov
er Based
on Load
UlLdrNi BSC690 ADD WRFD- Load Meaning: Action different from that specified by
nthActio 0 UCELL 150216 Based UlLdrFirstAction.
n LDR WRFD- PS GUI Value Range: NoAct(no action),
MOD 150217 Redirect InterFreqLDHO(inter-freq load handover),
UCELL ion from BERateRed(BE traff rate reduction),
WRFD- UMTS
LDR 070004 QoSRenego(uncontrolled real-time traff Qos re-
to LTE negotiation), CSInterRatShouldBeLDHO(CS domain
WRFD- Load inter-rat should be load handover), PSInterRatShould-
020306 Based BeLDHO(PS domain inter-rat should be load
PS handover), AMRRateRed(AMR traff rate reduction),
Handov CSInterRatShouldNotLDHO(CS domain inter-rat
er from should not be load handover), PSInterRatShould-
UMTS NotLDHO(PS domain inter-rat should not be load
to LTE handover), PSInterU2LLDHO(U2L PS Handover)
Load Unit: None
Based Actual Value Range: NoAct, InterFreqLDHO,
GSM BERateRed, QoSRenego, CSInterRatShouldBeLD-
and HO, PSInterRatShouldBeLDHO, AMRRateRed,
UMTS CSInterRatShouldNotLDHO, PSInterRatShould-
Handov NotLDHO, PSInterU2LLDHO
er
Enhance Default Value: NoAct(no action)
ment
Based
on Iur-g
Inter-
RAT
Handov
er Based
on Load
UlLdrNi BSC691 ADD WRFD- Load Meaning: Action different from that specified by
nthActio 0 UCELL 150216 Based UlLdrFirstAction.
n LDR WRFD- PS GUI Value Range: NoAct(no action),
MOD 150217 Redirect InterFreqLDHO(inter-freq load handover),
UCELL ion from BERateRed(BE traff rate reduction),
WRFD- UMTS
LDR 070004 QoSRenego(uncontrolled real-time traff Qos re-
to LTE negotiation), CSInterRatShouldBeLDHO(CS domain
WRFD- Load inter-rat should be load handover), PSInterRatShould-
020306 Based BeLDHO(PS domain inter-rat should be load
PS handover), AMRRateRed(AMR traff rate reduction),
Handov CSInterRatShouldNotLDHO(CS domain inter-rat
er from should not be load handover), PSInterRatShould-
UMTS NotLDHO(PS domain inter-rat should not be load
to LTE handover), PSInterU2LLDHO(U2L PS Handover)
Load Unit: None
Based Actual Value Range: NoAct, InterFreqLDHO,
GSM BERateRed, QoSRenego, CSInterRatShouldBeLD-
and HO, PSInterRatShouldBeLDHO, AMRRateRed,
UMTS CSInterRatShouldNotLDHO, PSInterRatShould-
Handov NotLDHO, PSInterU2LLDHO
er
Enhance Default Value: NoAct(no action)
ment
Based
on Iur-g
Inter-
RAT
Handov
er Based
on Load
WRFD- and LTE whether a cell enters the CLB state by the credit
0106160 Phase 1 resource usage. If a cell is in the CLB state,
3 HSUPA measurement-based inter-frequency handovers are
WRFD- Admissi triggered periodically to achieve load balancing
0106160 on between inter-frequency cells.
2 Control 15.
WRFD- PS DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH:
140217 Service Whether to enable downlink load-based dynamic
Redirect primary common pilot channel (P-CPICH) power
WRFD-
ion from adjustment algorithm. This algorithm adjusts the P-
0106160
UMTS CPICH transmit power by the downlink non-HSPA
4
to LTE power load to reduce the downlink non-HSPA power
WRFD- load. If this algorithm takes effect, other enabled
010616 MBMS algorithms for intra-frequency load balancing (based
WRFD- FLC(Fre on TCP or RTWP) automatically become invalid.
0106160 quency
16. ADAPTIVE_RACH: Function switch for the
8 Layer
adaptive RACH feature. When this switch is turned
Converg
WRFD- on, this feature is activated. In this case, the RNC
ence)/
140218 adjusts the random access parameters based on the
FLD(Fre
random access state and on the uplink power load of
quency
the target cell. When this switch is turned off, this
Layer
feature is deactivated.
Dispersi
on) 17. ACK_PRACH_PREAM_MEAS: Whether to
measure the number of acknowledged PRACH
FACH
preambles. When this switch is turned on, the RNC
Transmi
measures the number of acknowledged PRACH
ssion
preambles. When this switch is turned off, the RNC
Sharing
does not measure the number of acknowledged
for
PRACH preambles.
MBMS
18. CAMPING_STRATEGY_SWITCH: Whether to
Inter
enable the camping policy switching function when
Frequen
traffic is heavy. This is a function switch for the
cy Load
function. When the switch is turned on, the camping
Balance
policy switching function is enabled if traffic is heavy
MBMS in the entire network. Then, the target cell is no longer
Phase 2 a preferred camping cell for the UE in question, but a
MBMS random camping cell.
over Iur 19. INTERFREQ_HHO_IN_RTWP_SWITCH:
Dynami Whether the RNC considers the RTWP of the cell
c Power during incoming coverage-based inter-frequency
Estimati handovers to this cell. When this switch is turned on
on for and the Self Optimization Under Uplink Interference
MTCH feature takes effect, UEs can perform coverage-based
inter-frequency handovers to the cell only when the
MSCH difference between the RTWP and RSCP (RTWP -
Scheduli RSCP) of this cell is less than the value of the
ng "InterFreqInUlCovLimitThld" parameter in the "ADD
e
Manage
ment
Open
Loop
Power
Control
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
Inter-
Frequen
cy Load
Balancin
g Based
on
Configu
rable
Load
Threshol
d
MBMS
Soft/
Selectiv
e
Combini
ng
MBMS
Introduc
tion
Package
16/32/64
/
128Kbp
s
Channel
Rate on
MBMS
Service-
Based
PS
Handov
er from
UMTS
to LTE
WRFD- and LTE whether a cell enters the CLB state by the credit
0106160 Phase 1 resource usage. If a cell is in the CLB state,
3 HSUPA measurement-based inter-frequency handovers are
WRFD- Admissi triggered periodically to achieve load balancing
0106160 on between inter-frequency cells.
2 Control 15.
WRFD- PS DLLOAD_BASED_PCPICH_PWR_ADJ_SWITCH:
140217 Service Whether to enable downlink load-based dynamic
Redirect primary common pilot channel (P-CPICH) power
WRFD-
ion from adjustment algorithm. This algorithm adjusts the P-
0106160
UMTS CPICH transmit power by the downlink non-HSPA
4
to LTE power load to reduce the downlink non-HSPA power
WRFD- load. If this algorithm takes effect, other enabled
010616 MBMS algorithms for intra-frequency load balancing (based
WRFD- FLC(Fre on TCP or RTWP) automatically become invalid.
0106160 quency
16. ADAPTIVE_RACH: Function switch for the
8 Layer
adaptive RACH feature. When this switch is turned
Converg
WRFD- on, this feature is activated. In this case, the RNC
ence)/
140218 adjusts the random access parameters based on the
FLD(Fre
random access state and on the uplink power load of
quency
the target cell. When this switch is turned off, this
Layer
feature is deactivated.
Dispersi
on) 17. ACK_PRACH_PREAM_MEAS: Whether to
measure the number of acknowledged PRACH
FACH
preambles. When this switch is turned on, the RNC
Transmi
measures the number of acknowledged PRACH
ssion
preambles. When this switch is turned off, the RNC
Sharing
does not measure the number of acknowledged
for
PRACH preambles.
MBMS
18. CAMPING_STRATEGY_SWITCH: Whether to
Inter
enable the camping policy switching function when
Frequen
traffic is heavy. This is a function switch for the
cy Load
function. When the switch is turned on, the camping
Balance
policy switching function is enabled if traffic is heavy
MBMS in the entire network. Then, the target cell is no longer
Phase 2 a preferred camping cell for the UE in question, but a
MBMS random camping cell.
over Iur 19. INTERFREQ_HHO_IN_RTWP_SWITCH:
Dynami Whether the RNC considers the RTWP of the cell
c Power during incoming coverage-based inter-frequency
Estimati handovers to this cell. When this switch is turned on
on for and the Self Optimization Under Uplink Interference
MTCH feature takes effect, UEs can perform coverage-based
inter-frequency handovers to the cell only when the
MSCH difference between the RTWP and RSCP (RTWP -
Scheduli RSCP) of this cell is less than the value of the
ng "InterFreqInUlCovLimitThld" parameter in the "ADD
e
Manage
ment
Open
Loop
Power
Control
Coverag
e Based
PS
Handov
er from
UMTS
to LTE
MBMS
Broadca
st Mode
MBMS
Load
Control
MBMS
Admissi
on
Control
Inter-
Frequen
cy Load
Balancin
g Based
on
Configu
rable
Load
Threshol
d
MBMS
Soft/
Selectiv
e
Combini
ng
MBMS
Introduc
tion
Package
16/32/64
/
128Kbp
s
Channel
Rate on
MBMS
Service-
Based
PS
Handov
er from
UMTS
to LTE
13)EFACH_RRC_REG_CMP_SWITCH(E-FACH
RRC Registration Compatibility Switch)
Whether special UEs use the E-FACH to carry their
RRC CONNECTION SETUP messages when the cell
is enabled with E-FACH.
1: This switch is set to on. the RNC retransmits the
last RRC CONNECTION SETUP message on the E-
FACH if special users do not respond to the RRC
CONNECTION SETUP message on the FACH. If the
UE returns an RRC CONNECTION SETUP CMP
message, the UE stays in the CELL_DCH state during
data transmission.
0: This switch is set to off. no special processing is
performed on special users.
14)
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH
(Discard Responses with Incorrect TRANSCIDs from
UEs During P2D)
Whether the RNC discards a RADIO BEARER
RECONFIGURATION COMPLETE message
received from a UE during P2D state transitions when
the value of the "RRC transaction identifier" IE in the
message is incorrect.
1: This switch is set to on. The RNC discards the
message and waits for the UE's response.
0: This switch is set to off. The RNC rolls back the
P2D state transition procedure.
15)
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH (HHO Rollback Switch for 12.2K AMR Services
with AMRC Enabled)
Whether the RNC performs rollback after 12.2 kbit/s
AMR-NB services experience hard handover failures
in the scenario where the narrowband AMRC function
takes effect.
0: This switch is set to off. The RNC does not perform
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
1: This switch is set to on. The RNC performs
rollback after 12.2 kbit/s AMR-NB services
experience hard handover failures in the preceding
scenario.
16)RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH
29)INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H(Integrity Protection Optimization Switch for
Incoming Inter-RAT Handovers)
Whether the optimized integrity protection function is
enabled for incoming L2U or G2U inter-RAT
handovers.
1: This switch is set to on. The integrity protection
function is immediately activated for SRB0 to SRB4
after the incoming L2U or G2U inter-RAT handover is
complete.
0: This switch is set to off. The integrity protection
function is activated only for SRB2 after the incoming
L2U or G2U inter-RAT handover is complete. The
integrity protection for other SRBs (SRB0, SRB1,
SRB3, and SRB4) is activated only after the UE sends
a message.
30)CS_PAGING_OVERLAP_RRC_OPT_SWITCH(
Optimize CS Paging During RRC Procedures)
Whether the RNC performs optimized processing
when a UE is paged in the CS domain during an RRC
connection setup procedure.
1: Indicates that this switch is set to ON. The RNC
performs optimized processing when a UE is paged in
the CS domain during an RRC connection setup
procedure.
0: Indicates that this switch is set to OFF. The access
delay of the CS paging procedure increases.
31)INTRA_NODEB_RLCC_INIT_CAP_OPT_SWIT
CH(Optimize the Rate upon NodeB RL Change for H
Services)
Whether the rate optimization policy is applied in the
scenario where the radio link (RL) for HSPA services
changes inside the NodeB.
1: This switch is set to on. The rate optimization
policy is applied in the scenario where the RL for
HSPA services changes inside the NodeB.
0: This switch is set to off. The rate optimization
policy is not applied in the scenario where the RL for
HSPA services changes inside the NodeB.
32)DRNC_RL_PARA_UPT_OPT_SWITCH(RL
Parameter Update Optimization Switch on RNC)
Whether the RL PARA UPT IND message over the
Iur interface can be correctly processed.
DRNC_RL_REEST_OPT_SWITCH,
URA2FACH_OVERLAP_CELLUPT_PROC_SWIT
CH,
RB_SETUP_F2D_USE_AM_RLC_SWITCH,
RB_RECFG_D2F_USE_AM_RLC_SWITCH,
RB_RECFG_F2D_USE_AM_RLC_SWITCH,
RRC_UE_USER_SMOOTH_OPT_SWITCH,
TRNC_LOAD_CTRL_SWITCH,
IU_SIG_REL_PCH_PAGING_SWITCH,
CPC_OPT_FOR_RLSETUP_SWITCH,
D2P_L2DEACT_FAIL_OPT_SWITCH,
EFACH_RRC_REG_CMP_SWITCH,
P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITCH,
AMRC_ON_122_AMR_HHO_ROLL_BACK_SWIT
CH,
RELOC_IN_RG_COMB_INDEX_ALLOC_SWITC
H,
SCM_CU_CROSS_SWITCH,
DRNC_HSPA_CM_OPT_SWITCH,
IUB_TRANSID_OPT_SWITCH,
L2_ENHENCE_RECFG_OPT_SWITCH,
ASYN_RL_REEST_OPT_SWITCH,
RNC_IMSI_HO_OPT_SWITCH,
IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWIT
CH,
URA_PCH_LAC_RAC_CHG_NO_PAGING_SWIT
CH,
PAGING_OVERLAP_CU_OPT_SWITCH,
SRVCC_RELOC_IN_USE_CS_KEY_SWITCH,
SOCKET_RECEIVE_DATA_CORRECT_SWITCH,
CU_PRI_OVERLAP_OTHER_PROC_SWITCH,
INTERRAT2U_INTEG_PROTECT_OPT_SWITCH,
CS_PAGING_OVERLAP_RRC_OPT_SWITCH,
INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITCH
,
DRNC_RL_PARA_UPT_OPT_SWITCH
Default Value:
RB_RLREEST_AM_TRB_RLC_REEST_SWITCH:
0,RB_SETUP_UM_TRB_RLREEST_ADJUD_OPT_
SWITCH:0,DRNC_RL_REEST_OPT_SWITCH:
1,URA2FACH_OVERLAP_CELLUPT_PROC_SWI
TCH:0,RB_SETUP_F2D_USE_AM_RLC_SWITCH:
0,RB_RECFG_D2F_USE_AM_RLC_SWITCH:
0,RB_RECFG_F2D_USE_AM_RLC_SWITCH:
0,RRC_UE_USER_SMOOTH_OPT_SWITCH:
1,TRNC_LOAD_CTRL_SWITCH:
0,IU_SIG_REL_PCH_PAGING_SWITCH:
0,CPC_OPT_FOR_RLSETUP_SWITCH:
1,D2P_L2DEACT_FAIL_OPT_SWITCH:
0,EFACH_RRC_REG_CMP_SWITCH:
0,P2D_TSID_ERR_UE_RSP_MSG_DISCD_SWITC
H:
0,AMRC_ON_122_AMR_HHO_ROLL_BACK_SWI
TCH:
0,RELOC_IN_RG_COMB_INDEX_ALLOC_SWIT
CH:0,SCM_CU_CROSS_SWITCH:
0,DRNC_HSPA_CM_OPT_SWITCH:
0,IUB_TRANSID_OPT_SWITCH:
0,L2_ENHENCE_RECFG_OPT_SWITCH:
0,ASYN_RL_REEST_OPT_SWITCH:
0,RNC_IMSI_HO_OPT_SWITCH:
0,IUR_PRIQUEUE_INFO_TO_MODIFY_OPT_SWI
TCH:
0,URA_PCH_LAC_RAC_CHG_NO_PAGING_SWI
TCH:0,PAGING_OVERLAP_CU_OPT_SWITCH:
0,SRVCC_RELOC_IN_USE_CS_KEY_SWITCH:
1,SOCKET_RECEIVE_DATA_CORRECT_SWITCH
:1,CU_PRI_OVERLAP_OTHER_PROC_SWITCH:
0,INTERRAT2U_INTEG_PROTECT_OPT_SWITC
H:0,CS_PAGING_OVERLAP_RRC_OPT_SWITCH:
0,INTRA_NODEB_RLCC_INIT_CAP_OPT_SWITC
H:0,DRNC_RL_PARA_UPT_OPT_SWITCH:1
CELL_FACH-to-CELL_PCH-or-URA_PCH state
transition. When this switch is set to on, F2P state
transition is performed through the physical channel
reconfiguration procedure.When this switch is set to
off, F2P state transition is performed through the RB
reconfiguration procedure.
26.
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH:
Whether to carry parameters related to events 1A and
1D in system information block type 11 (SIB 11) and
SIB 12.If the switch of deferred measurement control
reading is turned on, the UE cannot promptly read
parameters related to events 1A and 1D for intra-
frequency neighboring cells from SIB 11 or SIB12. As
a result, the UE cannot perform soft handovers in
advance. The switch is set using DeferMcReadInd in
the ADD/MOD UCELLMEAS command.
GUI Value Range:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH,
CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITC
H,
CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWIT
CH, CMP_IUR_SHO_DIVCTRL_SWITCH,
CMP_UU_AMR_SID_MUST_CFG_SWITCH,
CMP_UU_ADJACENT_FREQ_CM_SWITCH,
CMP_UU_IGNORE_UE_RLC_CAP_SWITCH,
CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITC
H,
CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_S
WITCH,
CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_S
WITCH, CMP_UU_FDPCH_COMPAT_SWITCH,
CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH,
CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SW
ITCH,
CMP_F2P_PROCESS_OPTIMIZATION_SWITCH,
CMP_UU_IOS_CELL_SYNC_INFO_REPORT_SWI
TCH,
CMP_UU_INTRA_FREQ_MC_BESTCELL_CIO_S
WITCH,
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH,
CMP_F2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_D2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_RAB_5_CFG_ROHC_SWITCH,
CMP_RAB_6_CFG_ROHC_SWITCH,
CMP_RAB_7_CFG_ROHC_SWITCH,
CMP_RAB_8_CFG_ROHC_SWITCH,
CMP_RAB_9_CFG_ROHC_SWITCH,
CMP_HSUPA_MACD_FLOW_MUL_SWITCH,
CMP_SMLC_RSLT_MODE_TYPE_SWITCH
Unit: None
Actual Value Range:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH,
CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SW
ITCH,
CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITC
H,
CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWIT
CH, CMP_IUR_SHO_DIVCTRL_SWITCH,
CMP_UU_ADJACENT_FREQ_CM_SWITCH,
CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH,
CMP_UU_AMR_SID_MUST_CFG_SWITCH,
CMP_UU_FDPCH_COMPAT_SWITCH,
CMP_UU_IGNORE_UE_RLC_CAP_SWITCH,
CMP_UU_INTRA_FREQ_MC_BESTCELL_CIO_S
WITCH,
CMP_UU_IOS_CELL_SYNC_INFO_REPORT_SWI
TCH,
CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITC
H,
CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_S
WITCH,
CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_S
WITCH,
CMP_F2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_D2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_RAB_5_CFG_ROHC_SWITCH,
CMP_RAB_6_CFG_ROHC_SWITCH,
CMP_RAB_7_CFG_ROHC_SWITCH,
CMP_RAB_8_CFG_ROHC_SWITCH,
CMP_RAB_9_CFG_ROHC_SWITCH,
CMP_HSUPA_MACD_FLOW_MUL_SWITCH,
CMP_SMLC_RSLT_MODE_TYPE_SWITCH,
CMP_F2P_PROCESS_OPTIMIZATION_SWITCH,
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH
Default Value:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH:
0,CMP_IU_QOS_ASYMMETRY_IND_COMPAT_S
WITCH:
0,CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWIT
CH:
0,CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SW
ITCH:0,CMP_IUR_SHO_DIVCTRL_SWITCH:
0,CMP_UU_ADJACENT_FREQ_CM_SWITCH:
0,CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH
:1,CMP_UU_AMR_SID_MUST_CFG_SWITCH:
CELL_FACH-to-CELL_PCH-or-URA_PCH state
transition. When this switch is set to on, F2P state
transition is performed through the physical channel
reconfiguration procedure.When this switch is set to
off, F2P state transition is performed through the RB
reconfiguration procedure.
26.
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH:
Whether to carry parameters related to events 1A and
1D in system information block type 11 (SIB 11) and
SIB 12.If the switch of deferred measurement control
reading is turned on, the UE cannot promptly read
parameters related to events 1A and 1D for intra-
frequency neighboring cells from SIB 11 or SIB12. As
a result, the UE cannot perform soft handovers in
advance. The switch is set using DeferMcReadInd in
the ADD/MOD UCELLMEAS command.
GUI Value Range:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH,
CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITC
H,
CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWIT
CH, CMP_IUR_SHO_DIVCTRL_SWITCH,
CMP_UU_AMR_SID_MUST_CFG_SWITCH,
CMP_UU_ADJACENT_FREQ_CM_SWITCH,
CMP_UU_IGNORE_UE_RLC_CAP_SWITCH,
CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITC
H,
CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_S
WITCH,
CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_S
WITCH, CMP_UU_FDPCH_COMPAT_SWITCH,
CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH,
CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SW
ITCH,
CMP_F2P_PROCESS_OPTIMIZATION_SWITCH,
CMP_UU_IOS_CELL_SYNC_INFO_REPORT_SWI
TCH,
CMP_UU_INTRA_FREQ_MC_BESTCELL_CIO_S
WITCH,
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH,
CMP_F2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_D2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_RAB_5_CFG_ROHC_SWITCH,
CMP_RAB_6_CFG_ROHC_SWITCH,
CMP_RAB_7_CFG_ROHC_SWITCH,
CMP_RAB_8_CFG_ROHC_SWITCH,
CMP_RAB_9_CFG_ROHC_SWITCH,
CMP_HSUPA_MACD_FLOW_MUL_SWITCH,
CMP_SMLC_RSLT_MODE_TYPE_SWITCH
Unit: None
Actual Value Range:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH,
CMP_IU_QOS_ASYMMETRY_IND_COMPAT_SW
ITCH,
CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWITC
H,
CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SWIT
CH, CMP_IUR_SHO_DIVCTRL_SWITCH,
CMP_UU_ADJACENT_FREQ_CM_SWITCH,
CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH,
CMP_UU_AMR_SID_MUST_CFG_SWITCH,
CMP_UU_FDPCH_COMPAT_SWITCH,
CMP_UU_IGNORE_UE_RLC_CAP_SWITCH,
CMP_UU_INTRA_FREQ_MC_BESTCELL_CIO_S
WITCH,
CMP_UU_IOS_CELL_SYNC_INFO_REPORT_SWI
TCH,
CMP_UU_SERV_CELL_CHG_WITH_ASU_SWITC
H,
CMP_UU_SERV_CELL_CHG_WITH_RB_MOD_S
WITCH,
CMP_UU_VOIP_UP_PROC_AS_NORMAL_PS_S
WITCH,
CMP_F2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_D2F_RLC_ONESIDE_REBUILD_SWITCH,
CMP_RAB_5_CFG_ROHC_SWITCH,
CMP_RAB_6_CFG_ROHC_SWITCH,
CMP_RAB_7_CFG_ROHC_SWITCH,
CMP_RAB_8_CFG_ROHC_SWITCH,
CMP_RAB_9_CFG_ROHC_SWITCH,
CMP_HSUPA_MACD_FLOW_MUL_SWITCH,
CMP_SMLC_RSLT_MODE_TYPE_SWITCH,
CMP_F2P_PROCESS_OPTIMIZATION_SWITCH,
CMP_UU_SIB11_SIB12_WITH_1A1D_SWITCH
Default Value:
CMP_IU_IMS_PROC_AS_NORMAL_PS_SWITCH:
0,CMP_IU_QOS_ASYMMETRY_IND_COMPAT_S
WITCH:
0,CMP_IU_SYSHOIN_CMP_IUUP_FIXTO1_SWIT
CH:
0,CMP_IUR_H2D_FOR_LOWR5_NRNCCELL_SW
ITCH:0,CMP_IUR_SHO_DIVCTRL_SWITCH:
0,CMP_UU_ADJACENT_FREQ_CM_SWITCH:
0,CMP_UU_AMR_DRD_HHO_COMPAT_SWITCH
:1,CMP_UU_AMR_SID_MUST_CFG_SWITCH:
12 Counters