Professional Documents
Culture Documents
CE Sec2Strippit&ThinTurret
CE Sec2Strippit&ThinTurret
C.E. TOOLING
Strippit® is a Registered Trade Mark of tLVD Corporation, Inc. • Series 90® is a Registered Trade Mark of Wilson Tool International Delivery
PAGE Work
Tools up to 1.250 (31,7mm) For use in all FAB & Thin Turret Mach. Days
1/2” Station DROP-IN TOOLS .031 - .500 ,8-12,7mm COMPATIBLE COMPONENTS FOR ALL MAJOR BRANDS 6 1-3
5/8” Station DROP-IN TOOLS .031-.6251,8-15,8mm COMPATIBLE COMPONENTS FOR ALL MAJOR BRANDS 6 1-3
1.032” Station DROP-IN TOOLS .500-1.032,12,71-26,2mm COMPATIBLE COMPONENTS FOR ALL MAJOR BRANDS 6 1-3
1/2” Station ASSEMBLIES .031-.500/1.88-12.7mm COMPONENTS FOR ALL MAJOR BRANDS 7 1-3
1 1/4” Station ASSEMBLIES .500-1.250, 12,7-31,7MM 8 1-3
9 3-4
1 1/4” Station HEAVY DUTY ASSEMBLIES .500-1.250 12,7-31,7mm 9-10 1-4
ADAPTER 22 3-10
Alignment Tools 5 1-3
CHARACTER MARKING UNITS 27 2-8
Corner Radius Tools 18
Ejectors 18 1
Punch Shears Punch Sharpening Fixture • • go section 14 p15
Widths or Dia. Under .093(2,36mm) Add 30% to set price. .09 land,
.09 Optional
then
Widths or Dia. Under .062(1,57mm) Add 50% to set price. 1.5° relief STUBBY PUNCH
Widths or Dia. Under .046(1,2mm) Add 100% to set price.
Included in add on cost; Dies are produced with .090 land then a 1.5° relief is given to prevent multiple slugs
from stacking causing excessive pressure on punch. Further, punches can be produced with Stubby Punch Design
at no additional charge. A Stubby Punch has it’s tip (diameter or width) first ground to a size of .187 then a tip is
ground to requested size for a length of .225+ thickness to be punched. (If fitted strippers are used, + .125 to tip .187DIA. OR
Dia.
WIDTH
grind length and use strippers .187 or > in diameter or width.) or Width
.156
STANDARD KEYING
10 Standard Shapes plus Rounds. (RT Rectangles • SQ=Square • OB=Obround • SD=Single-D • DD=Double-D
LD=Long-D • EQ=Equalateral • OC=Octagon • HX=Hexagon • QD-Quad-D • Add $10 per set to standard price for LD & EQ
½ •1¼ 180 0
Ex. 28XX/36t
Ex.114/112/C Keyed 20
Keyed 20
270
Sta. C
Visualize location key positioned as
2” tool would load into turret. Start with
length of shape horizontal.(Length points to 0º)
Next Rotate shape, not location key.
A sketch accompanying your order insures
keying as required! Note: Other Manufactures
ordering diagrams may differ from C.E.’s!
Sta. D
3½”
10 STANDARD SHAPES
Ships in 1 - 4 work days.
RECTANGLE • SQUARE • OBROUND • SINGLE-D
DOUBLE-D • QUAD-D • HEXAGON • OCTAGON
+ $10 PER SET FOR: LONG-D & EQUILATERAL
Sta. E Expediting FDS=Firm Delivery Service
4½” • Order by 1pm,
Tool Styles: AT, AS, ST:
1 day FDS=25% 2 day FDS=10%
Tool Styles 36tc, 28st, 92/93
1 day FDS=50% 2 day FDS=25%
Series SPECIAL SHAPES
80
Sta.C-E
2”-4½”
Page 3
C.E. PRODUCT FEATURES HIGHLIGHTS
COLE ENGINEERED
Dies Types: To allow the slug to fall through die land, a taper relief is given
to allow slug to pass though with little drag. S/F
CORNER ROUNDING For Single Station Machines Stocked dies for use with 22-7gauge material
With Die No Die Gage RADIUS
RADIUS Sta. Cat. Code Gauge Punch w/heel
UNDER 1/8 1-1/4 *SSTCPADsprR
† 1/8-3/16-1/4-3/8-1/2 1-1/4 *SSTCPAD†rCR
† 3/4, 7/8, 1”, 1½, 2” 3-1/2 *SSTEPDS†rCR
Page 4 OTHER RADII ALSO AVAILABLE ON A MADE-TO-ORDER BASIS! CALL FOR PRICING.
COLE ENGINEERED
OPTIONAL PUNCH SHEARS
Considered for All Diagonal Dimensions > 2”/50.8mm and a Min.Width of .375/9.53mm
2" Punch
AESI New Style 3-1
Full Body Punch
Page 5
DROP-IN Tools
COLE ENGINEERED
A=½” or B = 5/8
CLIP STYLE WT Style *= R-round S-shape Round Shape
1/2 or 5/8 Holder Side Load ST-(A or B)-DIw-s n/a
1/2 or 5/8 Holder Clip Style
DROP-SET ST(A or B)-PHSD*-*
Punch, Head, fitted Stripper & Die
Page 7
E-Series (FAB) Strippit Style
COLE ENGINEERED
1-1/4 Station Range .501-1.250”/12.7-31.7mm
INDUSTRY STANDARD ASSEMBLY
“OVERSIZED UNITS”
Exceed station maximum to Wrench
1.29” 32.77mm *A-SPWR
Add On Charge will Apply
No Go Gauge
*A67294 $47
QA Quick Adjust™ Preloaded spring Pack Fast tool length adjustment, no tools needed.
Increased Grind Life Up to .250"/6.35mm in .06"/1.52mm material.
Use with Industry Standard Punch & Guide.
Note: Round punches need to be pinned and require a shaped guide to accommodate pin in the punch.
1
10 4
Punch Guide& QA STCPGC-*
5
Punch & Guide Only STC-PG-*
6 DIE ST-C-D-*
7
DIE w/Slug Trap™ S/F STC-D-st-*
8
9
DIE w/Slug Z-Hugger S/O ST-C-D-so-*
ROUNDS PUNCH Shapes STC-Phs-* n/a
Punch &
Guide are PUNCH Pinned Round STC-Phs-rpin n/a
keyed when 10 QA Spring Assembly STCQSA
used with 4 QA Driver STCQSD
QA-
2 QA Head STCQSH
Assembly
7 QA Spring Support STCQSSS
8 QA Adjust Pins STC10393
6 QA Spring for Adjust STC6601
5 QA Sprg Support Plate STC10395
9 O-Ring Retainer - *ASTCOring
3 SPRING STC-S
Page 8
COLE ENGINEERED
FAB or Thin Turret 1-1/4” Heavy Duty
Maximum Material
3/8 Mild Steel
GUIDE (Open End) GUIDE Keyed 1.25 Open End STC-GHD-s 200243
PUNCH HEAD
SPRING
Ref. PRICE
ROUNDS CODE No. STRIPPIT®
1”PUNCH BODY CODE. ROUND
OIL RESERVOIR PUNCH ASSEMBLY STC-PANB-* 200234-000
Fill with 80/90 wt. oil
DIE STC-D-R 48532-000
Component Parts for Heavy Duty or Nibbling Units Part # STRIPPIT® CODE .
PRICE
ADJUSTABLE PUNCH HEAD STC-PHHD 200237-000
SPRING (STEEL) HEAVY DUTY STC-SSHD 41706-000
SHARPENING SHIM STC-SM 200241-200
LOCATION KEY (shaped guides) STC-GKHD 200245-000
WASHER STC-WHD 200282-000
PUNCH LOCK STC-PL 200238-000
OIL RESERVOIR STC-ORHD 200463-000
Page 9
FAB (Strippit) 3 1/2” Station Tools
Notcher Punch shown in Standard
COLE ENGINEERED
Quick Release
CE/Ketec offers three Stripper Retention
(Locking Ring)
styles of Holders
™
The Quick-Set shown->
™
The Basic & Series 80+
See page 12 for further details
Note Quick Release Stripper Plate
feature will not be available till
July 26, 2010
™
The Quick-Set Full of Featured
Length Adjustment No Shimming! Press in button, then turn spring pack.
• Keying 0,45,90,135, 180,270º
• Quick Release Stripper Retention (Locking Ring) Available July 26, 2010
STRIPPER ASC-Sam-*
Spring DIE only D2 Steel ASC-D-*
Punch DIE w/SLUG TRAP™ ASC-D-st-*
Drive
AMADA COMPATIBLE C.E. Tool Part# PRICE
Guide
GUIDE ASSEMBLY *A-ASC-GA
Stripper
Clip PUNCH HEAD ASC-PH
S.H.C.S. (M8X20) ASCDE-8X20
Maximum material SPRING DISC (18) AS-C-SD
1/4” (6,mm) Mild Steel
PUNCH DRIVER ASC-PD
Shaped Dies Keyed 0 & 90º
Squares 0 & 45º Draw Bolt M12 X__ ASC-DBMX__
Punches Keyed 0 for GUIDE Keyed 0,90 ASC-G
location at 0 & 90º
KEY (W/M5X8 FH) ATC-E-K
STRIPPER CLIPS W/SCREWS ATC-DE-SC
STYLE
COLE ENGINEERED
Pricing is for Punch Tip Sizes .093 (2,3mm) and Above Range 1.251-3.500 31,7-88,9MM
C.E. Part#
Description *=R-round S-shape PRICE PRICE
M12 THREAD
Shaped Dies Keyed 0 & 90º Squares 0 & 45º For (TiN) TITANIUM NITRIDE Coating Add 5
Additional Die Keys Additional. Days to Delivery .
Shaped Punches Keyed At 0° Additional 45º Key Extra Cost. For (TiCN) TITANIUM CARBONITRIDE
Maximum material 1/4” Mild Steel COATING
Shapes on angles Of Punch & Die Also Made-To-Order. Add 5 Days to Delivery.
C.E. Tool
DESCRIPTION Part# PRICE
GUIDE ASSEMBLY
For Full Body Punch *A-ASD-GA
PUNCH HEAD ASD-PH
S.H.C.S. (M6X20) ASD-6X20
SPRING DISC (4) ASD-SD
PUNCH DRIVER ASD-PD
Draw Bolt i=1/2”or m= M12 X50 ASD-DBMX50
GUIDE Keyed 0,90 & 45° *A-ASD-G3
KEY (W/M5X8 FH) ATDEK
STRIPPER CLIPS W/SCREWS *A-AS-D-SC
1” shank Punches
Allow use of 1” shank punches or Full Body page 15 & 16.
Adapter Only *A-ASDAWT
3 3/4"
.28
WT Style Stripper
Only used on WTS80/90 Holders
Shaped Dies Keyed 0 & 90º Squares 0 & 45º TiN TITANIUM NITRIDE COATING or
Additional Die Keys Additional. Maximum TiCN TITANIUM CARBONITRIDE COATING
Shaped Punches Keyed At 0° material
1/4” Mild Sta. E 3½ Add 5 Days to Delivery.
Additional 45º Key Extra Cost. Steel Note: Better option may be to upgrade punch steel to
Shapes on angles Of Punch & Die Also Made-To-Order. Semi-HSS steel at minimal additional cost!
Page 16
THIN TURRET
Thin Turret 3½ Sta. D (Metric)
STYLE
COLE ENGINEERED
Page 17
COLE ENGINEERED
Strippit /LVD MULTI-TOOL ®
LVD/AS-MT8 Stripper
Punch
1.052”diameter Body .266”dia.
.125 thick X 70,6mm
Shapes: X2 Key
.26”+ flat 0&90
ST/LVD-MT8 Stripper .68”dia
Thick
8 Sta. Round ATMT8Pr 202864 ATMT8PDSr
ATMT8Dr 202856 STBSr 200732
-.6299 STBSs
16,0mm Shape ATMT8Ps 202855 ATMT8Ds 202857 ATMT8PDSs
200743
No loc tab
P:H=.812dX.246-.3dX.025 B=.6299 Pin=1/8 .62 from head flange D:1.00diaX.7 3/16dowel .34from bottom
Page 18
SPECIAL APPLICATION FORMING TOOLS
COLE ENGINEERED
HIGHER PRODUCTIVITY THROUGH SUPERIOR ENGINEERING
A
C B Form Down Sp74 Form Up Sp63
D D
C B
C
A A
B
D >= 45º DIE w/No Stripper D>= 45º DIE w/No Stripper
Quick-Set™ Punch and Die Cat. Quick-Set™ Punch and Die Cat.
C Code *FAT_PD-D72 Code *FAT_PD-U63
B
A
1” 1.375 2½ 3.000
1¼ 1.750 3” 3.625
TO ADJUST, LIFT & TURN
THREAD FORM DOWN ONLY
BRIDGE TOOL C.E.TOOLING
A EXTRUSIONS
C
E
Page 19
SAVE! MASTER FORM TOOL HOLDER Accepts
COLE ENGINEERED
Inserts to perform common forming Applications
Adjust the Quick-Set™ to INSERT PLATE
its shortest length by lifting *FIP $20.50 Included with die
STRIPPER PLATE
.28 I.D. Part# *FCDIPD $32.50
53” I.D. Part# *FCDIPV $32.50
URETHANE
INSERT CHANGING P.STRIPPER
INSTRUCTIONS: While holding die base, Form-Down Yellow
Part# *FCPUD $14.95
pull knurled portion of the insert plate apart from Form Up Orange
the die base. If replacing with new insert, first Part# *FCPUU $14.95
check that I.D. hole in the stripper plate, is large
enough to allow insert to go through. Insert the
Insert Plate into die assuring alignment of the pin
extending out of the die base to mate with one of INSERT
two holes in the stripper plate. To keep the die RETAINER
base in good working order and prolong its life, Part#*FCPIR
Mate
E A S Y A D JU S T H E A D
WT Style
CE Tooling UltraTec™ Amada Style
Quick-Set accept Amada
Dedicated Style
or WT Inserts
C.E.TOOLING
COLE ENGINEERED
TOOLS
THOR D2
Page 20 C
Form Inserts for CE, WT & Amada Style Holders
COLE ENGINEERED COINING /Counter Sink Inserts/Chips
For pre-pierce hole size, See chart/formula in Technical Reference booklet Section 1
NO ROLL-OVER D
RECOMMENDED IF "H" IS
PRE-PUNCH THICKER THAN MATERIAL
B H
HOLE
A
C AT Shown, similar
available for ST/
AS in Sta.½ or 5/8
WT Style Insert
WT Amada Style Chip Form Up
CE Style Insert *FIPWT56 $84.30
#43114
CE
*FIP56 $84.30 Ø.500 CE#*FIP56AM
AMADA$84.30
.6320
Ø.472
.50
A
.58 C
D=ANGLE
B
CE .500 MAX.
Dedicated die is
B suggested over
C C
B B B
CENTER POINT
HALF SHEAR TWO HALF SHEARS USED
FOR ALIGNING TWO SHEETS
POCKET FORMING
CUTTING
INSERT INSERT
INSERT
POCKET INSERT
FORMING INSERT
A
C.E. TOOLING OFFERS BOTH A
STANDARD AND PROGRESSIVE
D
STYLE LOUVERS AND CARD-GUIDES. C B
PROGRESSIVE TOOLS ARE MADE TO EXACT
D
MATERIAL THICKNESS. THE LENGTH IS
B (11 GAGE MAX.)
E UNLIMITED THROUGH NIBBLING OPERATION.
C
Reference P3.23 for further information
(11 GAGE MAX.)
DOUBLE BEND
SP-77
C
B
A
TYLE
D
B=.250 MAX.
A
Standard LOUVER Sizes
“A”
C
E=WIDTH
C C
Length “B” “C” “D”
OF TAB LE
2”
2-1/2” 1/2” 3/16” 3/4”
PROGRESSIVE STIFFENING RIB 3”
3-1/2” 5/8” 1/4” 15/16
4”
Punch is made for 4-1/2” 3/4” 1/4” 1-1/8”
a specific material
thickness
Sheet Lifter Dies
Unlimited Length
B
Lifter dies are placed in
Width Nibbles your turret on each side of a
A special forming tool. When
R the sheet passes through
this section of the turret,
these lifter dies will lift the
Standard “A” “B” “R”
sheet up to the height of the
Size 3/8 3/16 3/16 form die, preventing the
sheet from colliding with the forming die which at times
Other sizes available on MADE-TO-Order! causes the sheet to break the grip of the work holder
clamps. 1-1/4” Part# ATBD-Lifter
Page 22
COLE ENGINEERED
CHARACTER MARKING TOOLS
DEDICATED MARKING UNITS Produced to stamp Logo’s, Names, Part No., etc.. Contact our
tooling engineers to discuss your particular application. Camera Ready Art Work or Cad
-.DXF/.IGES files are required for Logo’s. Dedicated form tools can be produced to stamp
Logo’s, Names, Part No., etc..
SHARP FACE CHARACTER STAMP INSERT HOLDERS
Available 1/16, 3/32, 1/8, & 3/16 width X ¼ height. 1/8 is standard. 1/16, 3/32 & 3/16 Are Also
Available. Blanks/spacers cost = 60% of regular character price
1/8 *ACHAR⅛ stamps .09X.15 1/16 *ACHAR1/16 stamps .06X.12” • 5/32 *ACHAR5/32 stamps .125”X.19”,
3/16 *ACHAR3/16 stamps.156X.23 Spacer Kit I*ASPACER includes widths of: 4 each 1/16, 3/32,⅛, 2 pcs 3/16
Catalog Catalog
SET *FSTE-SDU *FSTE-SDD
3½”Sta. E PUNCH *FSTE-PBB *FSTE-PDD
Double Cartridge *FSTE-DCD *FSTD-CD Go to our Section 1
Row Die Complete *FSTE-SDU STE-Dr-0
Character Width 1/16 1/8 3/16 1/16 1/8 3/16 booklet for more
Qty Per Row 48 24 16 50 25 16
Info on Marking.
Page 23
COLE ENGINEERED
Page 24