BoC-0260
Brother DR-200, 250, 300
OPC RESET SHEET
TEMPLATE
in this cartridge a reset sheet
will need to be installed. Photocopy or scan at
100% the template to the right using a high
quality heavy paper. Carefully cut the pattern
out and place on top of the drum section flat
edge first in between the drum and transfer
roller. Turn the drum until the back of the sheet
is about halfway across the transfer roller.
When your customer installs the drum unit,
the start-up cycle will feed the resat sheet
through the fusing assembly and reset the
printer.
Figure Shown with OEM Reset Sheet
Installed
Doc-0260 - Brother DR 200,250, 300 OPC Reset Sheet Template