Professional Documents
Culture Documents
Nokia 5300 Apac Ug en
Nokia 5300 Apac Ug en
DECLARATION OF CONFORMITY
Hereby, NOKIA CORPORATION declares that this RM-146 product is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity can be found from
http://www.nokia.com/phones/declaration_of_conformity/.
0434
Copyright © 2007 Nokia. All rights reserved.
Nokia, Visual Radio, Nokia Connecting People, Xpress-on, XpressPrint, and Pop-Port are
trademarks or registered trademarks of Nokia Corporation. Other product and company
names mentioned herein may be trademarks or tradenames of their respective owners.
US Patent No 5818437 and other pending patents. T9 text input software Copyright
© 1997-2007. Tegic Communications, Inc. All rights reserved.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for
personal and noncommercial use in connection with information which has been
encoded in compliance with the MPEG-4 Visual Standard by a consumer engaged in a
personal and noncommercial activity and (ii) for use in connection with MPEG-4 video
provided by a licensed video provider. No license is granted or shall be implied for any
other use. Additional information including that relating to promotional, internal and
commercial uses may be obtained from MPEG LA, LLC. See <http://www.mpegla.com>.
This device complies with Directive 2002/95/EC on the restriction of the use of certain
hazardous substances in electrical and electronic equipment.
Under no circumstances shall Nokia be responsible for any loss of data or income or any
special, incidental, consequential or indirect damages howsoever caused.
The contents of this document are provided "as is". Except as required by applicable law,
no warranties of any kind, either express or implied, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose, are made in
relation to the accuracy, reliability or contents of this document. Nokia reserves the
right to revise this document or withdraw it at any time without prior notice.
The availability of particular products may vary by region. Please check with the Nokia
dealer nearest to you.
This device may contain commodities, technology or software subject to export laws
and regulations from the US and other countries. Diversion contrary to law is
prohibited.
Issue 2.1
INTERACTIVE DEMONSTRATIONS
SOFTWARE Learn how to set up your phone for the
first time, and find out more about its
features. Interactive Demonstrations give
step-by-step instructions on using your
phone.
USER’S GUIDE
The online User’s Guide contains detailed
information on your phone. Remember to
check regularly for updates.
SOFTWARE
Make the most of your phone with
software for your phone and PC. Nokia PC
Suite connects your phone and PC so you
can manage your calendar, contacts,
music and images, while other
applications complement its use.
USER’S GUIDE
SETTINGS
Certain phone functions, such as
multimedia messaging, mobile browsing
and email*, may require settings before
you can use them. Have them sent to
your phone free of charge.
SETTINGS
*Not available on all phones.
1. Get started
■ Install SIM card and Open the SIM card holder (4), and
battery insert the SIM card properly into the
holder (5). Close the SIM card holder
Always switch the device off and
(6).
disconnect the charger before
removing the battery.
Keep all SIM cards out of the reach
of small children.
For availability and information on
using SIM card services, contact
your SIM card vendor. This may be
the service provider, network
operator, or other vendor.
This device is intended for use with
BL-5B battery. Always use original Replace the battery (7). Slide the
Nokia batteries. See ”Nokia battery back cover into its place (8, 9).
authentication guidelines” p. 73.
To remove the back cover of the
phone, push the back cover release
button (1), and detach the back
cover away from the phone (2).
Remove the battery as shown (3).
2. Your phone
■ Keys and parts Earpiece (1)
Music player, skip, rewind (2)
Music player, start, pause (3)
Enhancements connector (4)
Music player, skip, forward (5)
Call key (6)
Left, middle, and right selection
keys (7)
End key (8)
Scroll keys (9)
Keypad (10)
Charger connector (11)
USB connector (12)
Power key (13)
Phone strap eyelet (14)
Camera lens (15)
Volume up/PTT key (16)
Volume down (17)
Camera key (18)
Infrared port (19)
Self-portrait viewfinder (20)
Loudspeaker (21)
■ Functions without a
SIM card
Several functions of your phone may
be used without installing a SIM
card (for example, the data transfer
with a compatible PC or another
compatible device). Some functions
appear dimmed in the menus and
cannot be used.
For an emergency call, some
networks may require that a valid
SIM card is properly inserted in the
device.
3. Call functions
■ Make a call Speed dialing
1. Enter the phone number, Assign a phone number to one of the
including the area code. speed-dialing keys, 2 to 9. See
For international calls, press * ”Speed dials” p. 29. Call the number
twice for the international prefix in either of the following ways:
(the + character replaces the • Press a speed-dialing key, then
international access code), enter the call key.
the country code, the area code • If Speed dialling is set to On,
without the leading 0, if press and hold a speed-dialing
necessary, and the phone key until the call begins. See
number. Speed dialling in ”Call” p. 38.
2. To call the number, press the call
key. Enhanced voice dialing
To increase the volume in a call, You can make a phone call by saying
press + and to decrease, press - . the name that is saved in the contact
3. To end the call or to cancel the list of the phone. Voice commands
call attempt, press the end key, or are language-dependent. To set the
close the phone. language, see Recognition lang. in
”Phone” p. 38.
To search for a name or phone
number that you have saved in Note: Using voice tags may
Contacts, see ”Search for a contact” be difficult in a noisy
p. 27. Press the call key to call the environment or during an
number. emergency, so you should
not rely solely upon voice
To access the list of dialed numbers,
dialing in all circumstances.
press the call key once in the
standby mode. To call the number, 1. In the standby mode, press and
select a number or name, and press hold the right selection key, or
the call key. press and hold the volume down
key. A short tone is played, and
Speak now is displayed.
4. Write text
To enter text (for example, when ■ Predictive text input
writing messages), use traditional or
Predictive text input is based on a
predictive text input. When you
built-in dictionary to which you can
write text, press and hold Options to
also add new words.
toggle between traditional text
input, indicated by , and 1. Start writing a word using the
predictive text input, indicated by keys, 2 to 9. Press each key only
. Not all languages are once for one letter.
supported by predictive text input. 2. When you finish writing the word
The character cases are indicated by and it is correct, to confirm it by
, , and . To change the adding a space, press 0.
character case, press #. To change If the word is not correct, press *
from the letter to number mode, repeatedly, and select the word
indicated by , press and hold #, from the list.
and select Number mode. To change If the ? character is displayed
from the number to the letter mode, after the word, the word you
press and hold #. intended to write is not in the
To set the writing language, select dictionary. To add the word to the
Options > Writing language. dictionary, select Spell. Enter the
word using traditional text input,
■ Traditional text input and select Save.
Press a number key, 1 to 9, To write compound words, enter
repeatedly until the desired the first part of the word, and
character appears. The characters press the scroll key right to
available depend on the selected confirm it. Write the last part of
writing language. If the next letter the word, and confirm the word.
you want is located on the same key 3. Start writing the next word.
as the present one, wait until the
cursor appears and enter the letter.
The most common punctuation
marks and special characters are
available under the number key 1.
6. Messaging
You can read, write, send, and save language options like Chinese, take
text, multimedia, e-mail, audio, and up more space limiting the number
flash messages and postcards. All of characters that can be sent in a
messages are organized into folders. single message.
An indicator at the top of the display
■ Text message shows the total number of
With the short message service characters left and the number of
(SMS) you can send and receive text messages needed for sending. For
messages, and receive messages that example, 673/2 means that there are
can contain pictures (network 673 characters left and that the
service). message will be sent as a series of 2
messages.
Before you can send any text or SMS
e-mail message, you must save your
message center number. See Write and send a message
”Message settings” p. 24. 1. Select Menu > Messaging >
To check SMS e-mail service Create message > Text message.
availability and to subscribe to the 2. Enter one or more phone
service, contact your service numbers or e-mail addresses in
provider. To save an e-mail address the To: field. To retrieve a phone
in Contacts, see ”Save details” p. 27. number or e-mail address from a
Your device supports the sending of memory, select Add.
text messages beyond the character 3. For a SMS e-mail, enter a subject
limit for a single message. Longer in the Subject: field.
messages will be sent as a series of 4. Write your message in the
two or more messages. Your service Message: field.
provider may charge accordingly.
5. To send the message, select Send.
Characters that use accents or other
See ”Message sending” p. 15.
marks, and characters from some
You can move your messages to the Check your e-mail settings with your
Saved items folder. To organize your e-mail service provider. You may
Saved items subfolders, select receive the e-mail configuration
Menu > Messaging > Saved items. settings as a configuration message.
To add a folder, select Options > Add See ”Configuration settings service”
folder. To delete or rename a folder, p. xii.
scroll to the desired folder, and To activate the e-mail settings,
select Options > Delete folder or select Menu > Messaging >
Rename folder. Message settings > e-mail
Your phone has templates. To create messages. See ”E-mail messages”
a new template, save a message as a p. 26.
template. To access the template list, This application does not support
select Menu > Messaging > Saved keypad tones.
items > Templates.
Setting wizard
■ E-mail application The setting wizard will start
The e-mail application uses a packet automatically if no e-mail settings
data connection (network service) to are defined in the phone. To enter
allow you to access your e-mail the settings manually, select
account. This e-mail application is Menu > Messaging > e-mail >
different from the SMS e-mail Options > Manage accounts >
function. To use the e-mail function Options > New.
on your phone, you need a
The Manage accounts options allow
compatible e-mail system.
you to add, delete, and change the
You can write, send, and read e-mail e-mail settings.
with your phone. Your phone
supports POP3 and IMAP4 e-mail Write and send an e-mail
servers.
You can write your e-mail message
Before you can send and retrieve any before connecting to the e-mail
e-mail messages, you must obtain a service; or connect to the service
new e-mail account or use your first, then write and send your
current account. To check the e-mail.
availability of your e-mail account,
contact your e-mail service provider. 1. Select Menu > Messaging >
E-mail > Write new e-mail.
On, or select Menu > Messaging > Conversations — shows the list of
IMs, connect to the IM service, and new and read instant messages or
select Options > Settings > invitations to IM during the active
Automatic login > On. IM session.
Saved conversations — to view, indicates a new group message.
erase, or rename the conversations indicates a read group message.
that you saved during an IM session.
indicates a new instant message.
Connection settings — to edit the
indicates a read instant message.
settings needed for messaging.
indicates an invitation.
Connect The icons and texts on the display
To connect to the service, access the depends on the IM service.
instant messages menu, select the Online — shows the number of
IM service, if needed, and select contacts that are online.
Login. Offline — shows the number of
To disconnect from the IM service, contacts that are offline.
select Options > Logout. To start a conversation, expand the
Online or the Offline folder, and
Sessions scroll to the contact with whom you
When connected to the service, your would like to chat, and select Chat.
status, as seen by others, is shown in To answer an invitation or to reply to
a status line: My status: Online, My a message, expand the
status: Busy or Status: Appear off. — Conversations folder, scroll to the
to change own status, select contact to whom you would like to
Change. chat, and select Open. To add
contacts, see ”Add IM contacts”
Below the status line there are three
p. 22.
folders containing your contacts and
showing their status: Conversations, Groups > Public groups (not visible if
Online and Offline. To expand the groups are not supported by the
folder, scroll to it, and select Expand network) — The list of bookmarks to
(or press scroll right); to collapse the public groups provided by the service
folder, select Collapse (or press scroll provider is displayed. To start a IM
left). session with a group, scroll to a
group, and select Join. Enter the
screen name that you want to use as
Options > Chat or Join group — to If you receive a new message during
start the conversation when you a conversation from a person who is
have found the user or the group not taking part in the current
that you want. conversation, is displayed, and
the phone sounds an alert tone.
Accept or reject an invitation Write your message, and select
If you receive a new invitation, to Send. Your message is displayed, and
read it, select Read. If more than one the reply message is displayed below
invitation is received, select an your message.
invitation and Open. To join the
private group conversation, select
Add IM contacts
Accept, and enter the screen name
you want to use as your nickname. When connected to the IM service,
To reject or delete the invitation, in the IM main menu, select
select Options > Reject or Delete. Options > Add contact > By mobile
number, Enter ID manually, Search
Read an instant message from server, or Copy from server
If you receive a new message that is (depending on service provider).
not a message associated with an Scroll to a contact. To start a
active conversation, New instant conversation, select Chat.
message is displayed. To read it,
select Read. If more than one
This setting is not shown if Allow Select Menu > Messaging >
MMS receptn. is set to No. Message settings > E-mail messages
Allow adverts — to receive or reject and from the following options:
advertisements. This setting is not Configuration — to select the set
shown if Allow MMS receptn. is set that you want to activate.
to No, or Incoming MMS msgs. is set Account — to select an account
to Reject. provided by the service provider.
Configuration sett. > Configuration My name — to enter your name or
— Only the configurations that nickname.
support multimedia messaging are
E-mail address — to enter your
shown. Select a service provider,
e-mail address.
Default, or Personal config. for
multimedia messaging. Select Login information — to enter
Account and a MMS account information according to the server
contained in the active type.
configuration settings. Incoming mail sett. — to select the
maximum number of mails that shall
E-mail messages be retrieved.
The settings affect the sending, Outgoing sett. (SMTP) — to enter
receiving, and viewing of e-mail. You SMTP (simple mail transfer protocol)
may receive the settings as a information and setting options
configuration message. See used when sending e-mail.
”Configuration settings service” Displ. term. window > Yes — to
p. xii. You can also enter the settings perform manual user authentication
manually. See ”Configuration” p. 40. for intranet connections.
7. Contacts
8. Call log
9. Settings
To edit the copy and synchronize contact your service provider. You
settings, select a contact from the may receive the settings as a
transfer contact list and Options > configuration message. See
Edit. ”Configuration settings service”
To delete a transfer contact, select it p. xii and ”Configuration” p. 40.
from the transfer contact list and To start the synchronization from
Options > Delete. your phone, select Menu >
Settings > Connectivity > Data
Data transfer with a transfer > Server sync. Depending on
compatible device the settings, select Initialising
For synchronization use Bluetooth synchronisation or Initialising copy.
wireless technology or a cable
connection. The other device must Synchronizing for the first time or
be activated for receiving data. after an interrupted synchronization
may take up to 30 minutes to
To start data transfer, select Menu > complete.
Settings > Connectivity > Data
transfer and the transfer contact
from the list other than Server sync
USB data cable
or PC synchronisation. According to You can use the USB data cable to
the settings, the selected data is transfer data between the phone
copied or synchronized. and a compatible PC or a printer
supporting PictBridge. You can also
Synchronize from a compatible use the USB data cable with Nokia
PC PC Suite.
To synchronize data from calendar,
To activate the phone for data
notes, and contacts, install the Nokia
transfer or image printing, connect
PC Suite software of your phone on
the data cable. Confirm USB data
the PC. Use Bluetooth wireless
cable connected. Select mode., and
technology or a USB data cable for
select from the following options:
the synchronization, and start the
synchronization from the PC. Nokia mode — to use the cable for PC
Suite.
Synchronize from a server Printing & media — to use the phone
To use a remote Internet server, with a PictBridge compatible printer
subscribe to a synchronization or with your compatible PC.
service. For more information and
the settings required for this service,
Default profile — to select the profile Activ. def. in all apps. — to activate
that you want to be automatically the default configuration settings
activated when you connect to the for supported applications.
selected enhancement. Preferred access pt. — to view the
Automatic answer — to set the saved access points. Scroll to an
phone to answer an incoming call access point, and select Options >
automatically after 5 seconds. If Details to view the name of the
Incoming call alert is set to Beep service provider, data bearer, and
once or Off, automatic answer is off. packet data access point or GSM
Lights — to set the lights dial-up number.
permanently On. Select Automatic Connect to support — to download
to set the lights on for 15 seconds the configuration settings from your
after a key press. service provider.
Text phone > Use text phone > Yes — Device manager sett. — to allow or
to use the text phone settings prevent the phone from receiving
instead of headset or loopset phone software updates. This option
settings. may not be available, depending on
your phone. See ”Phone software
■ Configuration updates” p. 42.
You can configure your phone with Personal config. sett. — to add new
settings that are required for certain personal accounts for various
services to function correctly. Your services manually and to activate or
service provider may also send you delete them. To add a new personal
these settings. See ”Configuration account if you have not added any,
settings service” p. xii. select Add; otherwise, select
Options > Add new. Select the
Select Menu > Settings >
service type, and select and enter
Configuration and from the
each of the required parameters. The
following options:
parameters differ according to the
Default config. sett. — to view the selected service type. To delete or
service providers saved in the phone. activate a personal account, scroll to
To set the configuration settings of it, and select Options > Delete or
the service provider as default Activate.
settings, select Options > Set as
default.
11. Gallery
12. Media
Camera and video options 1. Select Menu > Media > Media
To use a filter, select Options > player > Streaming settings >
Effects > False colours, Greyscale, Configuration.
Sepia, Negative, or Solarise. 2. Select a service provider, Default,
To change the camera and video or Personal config. for streaming.
settings, select Options > Settings. 3. Select Account and a streaming
service account contained in the
■ Media player active configuration settings.
With the media player you can view,
play, and download files, such as ■ Music player
images, audio, video, and animated Your phone includes a music player
images. You can also view for listening to music tracks or other
compatible streaming videos from a MP3 or AAC sound files that you
network server (network service). have downloaded from the Web or
Select Menu > Media > Media transferred to the phone with the
player > Open gallery, Bookmarks, Nokia Music Manager application,
Go to address, or Media downloads which is part of Nokia PC Suite. See
to select or download media. ”Nokia PC Suite” p. 70.
Copyright protections may prevent
Select Menu > Media > Media
some images, music (including ring-
player > FF/Rew interval to set the
ing tones), and other content from
step width for fast forward or
being copied, modified, transferred
rewind.
or forwarded.
Music files stored in the music
Configuration for a
folder in the phone memory or on
streaming service the memory card will automatically
You may receive the configuration be detected and added to the music
settings required for streaming as a library during the startup of the
configuration message from the phone.
service provider. See ”Configuration To open the music player, select
settings service” p. xii. You can also Menu > Media > Music player.
enter the settings manually. See
”Configuration” p. 40. To activate
the settings, do the following:
■ Equalizer
You can control the sound quality
when using the music player by
amplifying or diminishing frequency
bands.
Select Menu > Media > Equaliser.
To activate a set, scroll to one of the
equalizer sets, and select Activate.
To view, edit, or rename a selected
set, select Options > View, Edit, or
Rename. Not all sets can be edited or
renamed.
■ Stereo widening
Stereo widening enhances the audio
output of stereo enhancements by
enabling a wider stereo sound effect.
To change the setting, select
Menu > Media > Stereo widening.
If available, select Menu > Push to joined to the channel hear the call
talk. simultaneously.
Push to talk (PTT) over cellular is a There are different types of PTT
two-way radio service available over channels:
a GPRS cellular network (network Public channel — Every channel
service). member can invite other persons.
You can use PTT to have a Private channel — Only persons
conversation with one person or which receive an invitation by the
with a group of people (channel) channel creator can join in.
having compatible devices. While
Provisioned channel — A permanent
you are connected to the PTT service,
channel is created by the service
you can use the other functions of
provider.
the phone.
You can set the status of each
To check availability and costs, and
channel to Active or Inactive.
to subscribe to the service, contact
your network operator. Roaming The number of active channels and
services may be more limited than the number of members per channel
for normal calls. is limited. Contact your service
provider for details.
Before you can use the PTT service,
you must define the required PTT
service settings. See ”PTT settings” Create a channel
p. 56 and ”Configuration settings” To add a channel, select Menu >
p. 57. Push to talk > Add channel, and
enter the settings in the form fields:
■ PTT channels Channel name: — Enter a name for
A PTT channel comprises a group of the new channel.
people (for example, friends or a Channel status: — Select Active to
workteam) who joined the channel set the channel active or Inactive to
after they where invited to. When disable the channel.
you call a channel, all members
■ Make and receive a PTT to the desired channel, and press and
call hold the PTT (volume up) key.
Warning: Do not hold the
device near your ear when Make a one-to-one call
the loudspeaker is in use, To start a one-to-one call from the
because the volume may be list of contacts to which you have
extremely loud. added the PTT address, select
To make a channel call, a one-to-one Contacts > Names or Menu > Push
call, or a call to multiple recipients, to talk > Contacts list. Scroll to a
you must hold the PTT (volume up) contact, and press and hold the PTT
key as long as you talk. To listen to (volume up) key.
the response, release the PTT To start a one-to-one call from the
(volume up) key. list of PTT channels, select Channel
You may be able to check the login list, scroll to the desired channel,
status of your contacts in Menu > and select Members. Scroll to the
Push to talk > Contacts list. This desired contact, and press and hold
service depends on your network the PTT (volume up) key.
operator and is only available for To start a one-to-one call from the
subscribed contacts. To subscribe a list of callback requests you have
contact, select Options > Subscribe received, select Callback inbox.
contact, or if one or more contacts Scroll to the desired nickname, and
are already marked, Subscribe press and hold the PTT (volume up)
marked. key.
or indicate that the person
is either available or unknown. Make a PTT call to multiple
indicates that the person wants recipients
not to be disturbed, but can receive You can select multiple PTT contacts
callback requests. indicates that from the contact list. The recipients
the person has PTT not switched on. receive an incoming call and need to
accept the call in order to
Make a channel call participate. If supported by your
To make a call to a channel, select network operator, you also may
Channel list in the PTT menu, scroll select contacts with a phone number
but without PTT number. For details,
contact your network operator.
up) key, the selected function is To select the settings for connecting
performed. to the service, select Menu > Push
Show my login status — to enable or to talk > Configuration sett.. Select
disable the sending of the login from the following options:
status. Configuration — to select a service
PTT status in startup > Yes or Ask provider, Default, or Personal config.
first — to set the phone to for PTT service. Only the
automatically connect to the PTT configurations that support the PTT
service when you switch the phone service are shown.
on. Account — to select a PTT service
PTT when abroad — to switch the PTT account contained in the active
service on or off when the phone is configuration settings.
used outside of the home network. Other parameters are PTT user name,
Send my PTT address > No — to hide Default nickname, PTT password,
your PTT address from channel and Domain, and Server address.
one-to-one calls.
■ Web
■ Configuration settings Select Menu > Push to talk > Web to
You may receive the settings for access the Internet site of your PTT
connecting to the service from your provider.
service provider. See ”Configuration
settings service” p. xii. You can enter
the settings manually. See
”Configuration” p. 40.
14. Organizer
Make a calendar note and delete all the notes that you
Select Menu > Organiser > have marked as done.
Calendar. Scroll to the date, and
select Options > Make a note and ■ Notes
one of the following note types: To write and send notes, select
Meeting, Call, Birthday, Menu > Organiser > Notes.
Memo, or Reminder. Fill in
To make a note if no note is added,
the fields.
select Add; otherwise, select
Options > Make a note. Write the
Note alarm note, and select Save.
The phone displays the note and if
set, sounds a tone. With a call note ■ Calculator
on the display, to call the
The calculator in your phone
displayed number, press the call key.
provides basic arithmetic and
To stop the alarm and to view the
trigonometric functions, calculates
note, select View. To stop the alarm
the square and the square root, the
for 10 minutes, select Snooze.
inverse of a number, and converts
To stop the alarm without viewing currency values.
the note, select Exit.
Note: This calculator has
limited accuracy and is
■ To-do list designed for simple
To save a note for a task that you calculations.
must do, select Menu > Organiser > Select Menu > Organiser >
To-do list. Calculator. Press # for a decimal
To make a note if no note is added, point. Scroll to the desired operation
select Add; otherwise, select or function, or select it from the
Options > Add. Fill in the fields, and Options.
select Save. To save the exchange rate, select
To view a note, scroll to it, and select Options > Exchange rate. To
View. While viewing a note, you can perform the currency conversion,
also select an option to edit the enter the amount to be converted,
attributes. You can also select an and select Options > In domestic or
option to delete the selected note In foreign.
15. Applications
17. Web
Digital signature
You can make digital signatures with
your phone if your SIM card has a
security module. Using the digital
signature can be the same as signing
your name to a paper bill, contract,
or other document.
18. PC connectivity
You can send and receive e-mail, and service provider. See ”Modem
access the Internet when your phone settings” p. 36.
is connected to a compatible PC The use of HSCSD services consumes
through a Bluetooth, infrared, or a the phone battery faster than
data cable connection. You can use normal voice or data calls.
your phone with a variety of PC
connectivity and data
communications applications.
■ Bluetooth
Use the Bluetooth technology to
■ Nokia PC Suite connect your compatible Laptop to
the Internet. Your phone must have
With Nokia PC Suite you can activated a service provider that
synchronize contacts, calendar, supports Internet access and your PC
notes, and to-do notes between your has to support Bluetooth PAN
phone and the compatible PC or a (Personal Area Network). After
remote Internet server (network connecting to the network access
service). Download the PC Suite from point (NAP) service of the phone and
the CD delivered with your phone. pairing with your PC your phone
You may find more information on automatically opens a packet data
the Nokia Web site at connection to the Internet. PC Suite
www.nokia-asia.com/5300/support software installation is not
or your local Nokia Web site. necessary when using the NAP
service of the phone.
■ Packet data, HSCSD, See ”Bluetooth wireless technology”
and CSD p. 34.
With your phone you can use the
packet data, high-speed circuit ■ Data communication
switched data (HSCSD), and circuit applications
switched data (CSD, GSM data) data
For information on using a data
services. For availability and
communication application, refer to
subscription to data services,
the documentation provided with it.
contact your network operator or
■ Carkit
Nokia Multimedia Car Kit
CK-20W
Driving has never been this easy. The
Nokia Multimedia Car Kit CK-20W
integrates the comfort of handsfree
usage with superior audio and
multimedia options. Compatible with the
Nokia Navigation Pack LD-2 for a
high-quality navigation solution.
■ Data
Nokia 1 GB microSD Card
MU-22
This microSD Card provides 1 GB of
removable storage and increases the
available memory for data, music and
software applications.
If you suspect interference, switch off Using your device while flying in aircraft
your device, and move the device away. is prohibited. Switch off your device
before boarding an aircraft. The use of
■ Vehicles wireless teledevices in an aircraft may be
RF signals may affect improperly dangerous to the operation of the
installed or inadequately shielded aircraft, disrupt the wireless telephone
electronic systems in motor vehicles such network, and may be illegal.
as electronic fuel injection systems,
electronic antiskid (antilock) braking ■ Potentially explosive
systems, electronic speed control environments
systems, and air bag systems. For more Switch off your device when in any area
information, check with the with a potentially explosive atmosphere
manufacturer or its representative of and obey all signs and instructions.
your vehicle or any equipment that has Potentially explosive atmospheres
been added. include areas where you would normally
Only qualified personnel should service be advised to turn off your vehicle
the device, or install the device in a engine. Sparks in such areas could cause
vehicle. Faulty installation or service may an explosion or fire resulting in bodily
be dangerous and may invalidate any injury or even death. Switch off the
warranty that may apply to the device. device at refueling points such as near
Check regularly that all wireless device gas pumps at service stations. Observe
equipment in your vehicle is mounted restrictions on the use of radio
and operating properly. Do not store or equipment in fuel depots, storage, and
carry flammable liquids, gases, or distribution areas; chemical plants; or
explosive materials in the same where blasting operations are in
compartment as the device, its parts, or progress. Areas with a potentially
enhancements. For vehicles equipped explosive atmosphere are often but not
with an air bag, remember that air bags always clearly marked. They include
inflate with great force. Do not place below deck on boats, chemical transfer or
objects, including installed or portable storage facilities, vehicles using liquefied
wireless equipment in the area over the petroleum gas (such as propane or
air bag or in the air bag deployment area. butane), and areas where the air contains
If in-vehicle wireless equipment is chemicals or particles such as grain, dust,
improperly installed and the air bag or metal powders.
inflates, serious injury could result.