Professional Documents
Culture Documents
FB Hammermill en Data
FB Hammermill en Data
High-performance grinding
www.andritz.com/ft
High-performance grinding
For many applications
Hammer mill
Hammer mills for many Thus. the grinding process is not merely
applications a question of the hammer mill alone, but
The quality and know-how inherent in ham- also includes everything from feed system
mer mills are backed by over a century of to discharge hopper, aspiration filter, and
experience in the feed milling and other re- electronic control system.
lated industries around the world. The re-
quirements for grinding a large number of
special products have led to the develop-
ment of hammer mills that can be adapted
to almost any application, regardless of
whether coarse or fine grinding is required,
e.g. raw materials for the production of ani-
mal feed, fish feed, and pet food.
A complete solution
The correct combination of hammer mill
type, screens, hammers, speed, feeding
system, and air flow through the hammer
mill ensures the required grinding results
and creates optimum conditions for subse-
quent processes, such as mixing, pelleting,
and extrusion.
02
03
Optimill coarse grinders
for animal feed
Optimill coarse grinders
Optimill series pig, poultry feed products. The Optimill se- High capacity
The Optimill series consists of hammer mills ries has grinding chamber diameters of 1100 Low energy consumption
for raw material grinding of normal to coarse- mm and widths from 500 mm to 1200 mm. Reduced noise level
structured feed products, such as cattle, The operating speed is 1500/1800 rpm. The patented, closed rotor design can
save up to 20% in energy consumption
Optimill features compared to traditional rotor designs
Optimill, type 500/700/900
Screen frames are mounted inside large Large screen area Feed system for uniform screen load
sliding access doors. The mill rotor is Optimum particle size range
stopped during screen change.
Coarse-grained particles Low consumption
– high performance
The closed, aerodynamic rotor design
directs the material straight out towards the
screen, where highly effective, low-energy
grinding takes place.
04
Multimill
for aqua feed and pet food
Multimill
05
Grinding technique
for high controllability
Feeding devices
Distributor screw
Pocket feeder
Separator
% passing through
99.95
Design and function Feeding system for
99.8 The hammer mills are fed radially for dual- uniform load
99.6
99.0
98.0
rotational operation to achieve uniform By feeding the material over the full length
95.0 wear and full utilization of screens and of the grinding chamber, the particle size
90.0
80.0
Multimill hammers. Models with tangential inlets can be controlled accurately and the ham-
Ø0.75, 23% Multimill
70.0
Ø1.25, 25% are available for low-density products. The mers and screens have uniform loading,
60.0
50.0
40.0 hammer mills have a directly coupled mo- resulting in longer lifetime of wear parts and
30.0
20.0 tor mounted on a base frame. The front higher output per kilowatt.
10.0 Optimill
Ø3.0, 51%
doors are bottom-hinged and open on
5.0
sliding rails. All operating points have elec- The feed system, which is available as
1.0 Screen
(mm) tronic safety equipment. The hammer mills double screw and separator or as pocket
0.125 0.18 0.25 0.355 0.50 0.71 1.0 1.4 2.0 30.0
are supplied with a separator and a mag- feeder with integrated separator and distri-
net above the inlet to protect the grinding bution roll, can be adjusted to suit all raw
chamber against damage and spark risks material types.
from foreign objects in the material flow.
06
Grinding units
for stand alone applications
Feeding devices
Screw feeder
07
Where to find us
Global supplier – local presence
ANDRITZ is truly a global organization
– but also with local presence. We are
represented all over the world. The global
market for feed technologies is served from
five main locations:
Esbjerg, Denmark
Sanshui, Guangdong Province, China
Geldrop, Netherlands
Muncy, PA, USA
Humenné, Slovakia
CONTACT
All data, information, statements, photographs, and graphic illustrations in this leaflet are without any obligation and raise no liabilities to or form part of any sales contracts of
ANDRITZ AG or any affiliates for equipment and/or systems referred to herein. © ANDRITZ AG 2017. All rights reserved. No part of this copyrighted work may be reproduced, modified or
distributed in any form or by any means, or stored in any database or retrieval system, without the prior written permission of ANDRITZ AG or its affiliates. Any such unauthorized use for
I 0117
any purpose is a violation of the relevant copyright laws. ANDRITZ AG, Stattegger Strasse 18, 8045 Graz, Austria. 1215 GB