Problem Description:
A steel rod subjected to tension is modeled by one bar element, as shown in figure. Determine
the nodal displacements and the axial stress in each Element and reaction forces, E=2.1x 10° N/
mm/, 0.3 (Poisson‘s Ratio).
= 21x 10° Nim?
1500 N
Problem Description:
A steel rod subjected to tension is modeled by one bar element, as shown in figure. Determine
the nodal displacements and the axial stress in each Element and reaction forces. E=2.1x 10” N/
mm0.3 (Poisson's Ratio).
= 21x 10° Nimm*
2500N
Problem Description:
A steel rod subjected to compression is modeled by two bar elements, as shown in figure.
Determine the nodal displacements and the axial stress in each Element. E=207 GPa,
A=500 mm
¢-—05 n—+|—05 m—>|
12KNProblem Description:
A load of P = 60 x 10 3 N is applied as shown. Determine the following, a) Nodal
Displacement, b) Stress in each member, c) Reaction Forces.
Given Data: E=20 x10 Nimm?.0.3 (Poisson‘sRatio)
i> 20mm yp
150 mm 150mm, 1.2mm
Problem Description:
For the tapered bar shown in the figure determine the displacement, stress and reaction in
the bar. Given Al = 1000 mm? and A2 = 500 mm’, E= 2x10 Nim
10004
375mm
Problem Description:
Consider the stepped bar shown in figure below. Determine the nodal displacement stress in
each element, reaction forces.
E=2x10° N/mm 500.NProblem Description:
Find nodal displacement, stress in each element & reaction forces for the following problem Given
Data: 1) E1 =70x10° N/mm, A1 = 2400 mm?. 2) £2= 200 x 10° N /mm?, A2 = 600 mm?
= 03 (Poisson's Ratio)
MAMA
300mm) 400mm
Problem Description:
Find nodal displacement, stress in the element & reaction forces for the following
problem. Given Data: E = 2x 10° N fmm”, ‘= 0.3 (Poisson‘s Ratio).A1 = 40 mm »A2
=20 mm
1000 N
Problem Description:
Consider the bar loaded as shown. Determine the following
1)Nodal displacement, 2)Stress in the element, 3)Reaction forces. Given Data: P = 300 KN, E=
200x107 Nim? = 0.3 (Poisson‘s Ratio) ,A1 = 250 mm’, A2=400 mm?
[ss See | #2
150 mm | 150mm 300mm