Professional Documents
Culture Documents
Posição de Cilindros para Ajuste de Válvulas
Posição de Cilindros para Ajuste de Válvulas
Previous Screen
Welcome: uhyxel
Product: NO EQUIPMENT SELECTED
Model: NO EQUIPMENT SELECTED
Configuration: NO EQUIPMENT SELECTED
Testing and Adjusting
G3516H and G3520H Generator Set Engines
Media Number UENR051407 Publication Date 01/11/2014 Date Updated 27/09/2016
i06543455
Crankshaft Position for Valve Lash Setting
SMCS 1105; 1202
The SAE standard engine crankshaft rotation is counterclockwise when the crankshaft is viewed from the
flywheel end.
Table 1
Crankshaft Positions for Valve Lash Setting
Standard Counterclockwise Rotation
Stroke for the Number 1 Piston at Top
Engine Inlet Valves Exhaust Valves
Center Position (1)
Firing Order 12561314910151611123478
12569101113 1234111213
Compression Stroke
141718 141516
347812151619 56789101718
G3520 Exhaust Stroke
20 1920
12111234151678192091017185
Firing Order
61314
(1) Put the No. 1 Piston at the top center (TC) position and identify the correct stroke. Refer to Testing and Adjusting, "Finding
the Top Center Position for the No. 1 Piston". Find the top center (TC) position for a particular stroke and adjust for the
correct cylinders. Remove the timing bolt. Turn the flywheel by 360 degrees in the direction of normal engine rotation. This
action will put the No. 1 piston at the top center (TC) position on the other stroke. Install the timing bolt in the flywheel and
complete the adjustments for the cylinders that remain.
Copyright 1993 2017 Caterpillar Inc.
All Rights Reserved.
Mon Jan 23 2017 19:26:07 GMT0200 (Horário brasileiro de verão)
uhyxel
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpage=/sis… 1/1