Synthetic activated carbon in The tablet is ground by mortar and
tablet form is obtained. pestle to obtain powdered form of adsorbent to increase its surface area.
The powder is slowly dried in Sieving the carbon powder to obtain
the oven at 60 to remove any same size of powder particle to moisture. optimize efficiency.
Preparation of Dye Solution
Prepared solution of methylene
blue dye is available for laboratory use.
The solution was prepared by dissolving
the required amount of dye in distilled water in the Erlenmeyer flask. Experimental Procedure
Mixed 0.1g of powdered Pipette the solution and place
adsorbent with diluted dye in the cuvette. solution in the conical flask.
The solution is centrifuged in
Repeat experiment by using different laboratory centrifuge machine to adsorbent dosage as 0.3g and 0.5g separate liquid layer and the respectively. supernatant containing adsorbent.
Analyze the supernatant to determine
The concentration of methylene blue the concentration of remaining dye in the solution can be determined methylene blue dye in the solution using the standard curve obtained. using spectrophotometer.
Once placed in the correct slot, Calibrate the system in
emit the light and an absorbance spectrophotometer by running the reading will automatically desired wavelength (590 nm) using generated onto observing screen. distilled water in a cuvette.