Professional Documents
Culture Documents
Operation and Maintenance: Activate The Feature
Operation and Maintenance: Activate The Feature
Operation and Maintenance: Activate The Feature
This section provides Operation and Maintenance (O&M) information for the IPsec
feature.
7.1.1 Preconditions
To activate the feature, confirm that the following preconditions are met:
IPsec has been configured on the RBS. Refer to Configure IPsec for details on
how to configure IPsec.
1. Order and install the license key CXC 404 0004 for FAJ 121 3586: IPsec on
the RBS.
2. Set IpSec::featureState to ACTIVATED on the RBS.
Note:
For more information about licenses, refer to Licenses and Hardware Activation Codes.
7.2.1 Preconditions
For more information about licenses, refer to Licenses and Hardware Activation Codes.
For more information about the procedures to configure an IPsec-protected node access
for O&M traffic, see IP Infrastructure for O&M.