Professional Documents
Culture Documents
04 150723164808 Lva1 App6892 PDF
04 150723164808 Lva1 App6892 PDF
http://www.linkedin.com/pub/ray-khastur/36/965/b7a
KPI System Overview
LTE KPIs
• RRC • Call Drop • HHO SR • Radio • UL/DL • Cell UL/DL • Access • Service
SETUP SR Rate ( Intra/Inter Network RB Traffic Latency UL/DL
(VoIP/ALL) Frequency) Unavailabil Utility Volume Throughput
• ERAB • Service
ity Rate Rate
Setup SR • Call Setup • HO in SR • Radio Latency
(VoIP/ALL) Complete Bearer
• Inter-RAT • Interrupt
Rate Number
• Call Setup HHO SR Latency
SR (VoIP/ALL)
(VoIP/ALL)
The RRC setup procedure is trigged by different reasons as identified by the establishmentCause field in
the RRCConnctionRequest message: emergency, highPriorityAccess, mt-Access, mo-Signalling, mo-Data,
delayTolerantAccess-v1020.
The UE sets the establishmentCause and received by eNodeB. Causes except mo-Signalling are
categorized as service related ones, and the cause of mo-Signalling is categorized as signal related ones.
This KPI evaluates the RRC setup success rate with service related causes in a cell or cluster.
RRC _ Connection Success service
RRC _ SSRService 100%
RRC _ Connection Attempt service
This KPI evaluates the RRC setup success rate with signal related
causes (mo-Signalling) in a cell or cluster.
L.RRC.ConnReq.Att…
L.RRC.ConnReq.Succ …
There are 9 QCIs defined in 3GPP TS 23.203. Each of QCI has its QoS requirements, and each E-RAB will
has the attribute of QCI.
This KPI evaluates the success rate of the whole setup procedure for VoIP service (QCI 1
service) in a cell or cluster, which mainly includes three phases : RRC setup phase, S1
Signaling connection establishment phase and VoIP E-RAB setup phase:
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess VoIP _ ERAB _ SetupSuccess
VoIP _ CSSR * * 100%
RRC _ ConnectionAttempt Service S1SIGConnectionEstablishAttempt VoIP _ ERAB _ SetupAttempt
This KPI can be used to evaluate the call setup success rate of all services including the VoIP
service in a cell or a cluster. This KPI mainly includes three phases : RRC setup phase, S1 Signaling
connection establishment phase and service E-RAB setup phase:
This KPI can be used to evaluate the call drop rate of VoIP service (QCI 1 service) in a cell or cluster, the call drops
happen when eNode initiate active ERAB (with data in buffer) release process by E-RAB Release Indication or UE
Context Release Request message with Cause field with abnormal reasons (the cause other than : Normal Release,
Detach,User Inactivity, cs fallback triggered, UE Not Available For PS Service,or Inter-RAT redirection), and all of the
other E-RAB releases are consider as normal E-RAB release. VoIP _ CDR VoIP _ ERAB _ Abnormal Re lease 100%
VoIP _ ERAB _ Re lease
Call Drop Rate(ALL)
This KPI can be used to evaluate the call drop rate of all services in
a cell or a cluster, including VoIP service.
ERAB _ Abnormal Re lease
CDR( ALL) 100%
ERAB _ Re lease
Call Drop Rate(Always Online)
This KPI can be used to evaluate the call drop rate of all the services, including the VoIP services, when the always
online state is active. In always online state, the E-RAB number of UE entering the un-synchronous state from
synchronous state will be considered for the KPI calculating.
ERABAbnormalReleaseOfAlwaysOnline
AlwaysOnline _ CDR 100%
ERAB Re leaseOfAlwaysOnline
The similar as upper KPI, this KPI will evaluate the success rate in totally for 4 phases: RRC setup phase,
S1 Signaling connection establishment phase, service E-RAB setup phase and service E-RAB release
phase (when the always online state is active);
RRC _ ConnectionSuccessService S1SIGConnectionEstablishSuccess ERAB _ SetupSuccess ERABAbnormalReleaseOfAlwaysOnline
CSTR( AlwaysOnline) * * * 100%
RRC _ ConnectionAttemptService S1SIGConnectionEstablishAttempt ERAB _ SetupAttempt ERAB Re leaseOfAlwaysOnline
HOInSuccess
HOIn _ SR 100%
HOInAttempt
HO in Attempt Counters
HO in Success Counters
This KPI can be used to evaluate the inter-RAT handover success rate
from LTE to WCDMA in a cluster.
IRATHO _ L 2W _ SuccessOut
IRATHO _ L2W _ SRout 100%
IRATHO _ L2W _ AttemptOut
IRATHO _ L2G _ SuccessOut
IRATHO _ L2G _ SRout 100%
IRATHO _ L2G _ AttemptOut
This KPI can be used to evaluate the inter-RAT handover success rate from LTE to GERAN in a cluster.
This KPI can be used to evaluate the inter-RAT handover success rate from
LTE to CDMA2000 in a cluster.
C point, HO
Success