Professional Documents
Culture Documents
Cart and Pendulum 2 DOF Equations of Motion Legal
Cart and Pendulum 2 DOF Equations of Motion Legal
Cart and Pendulum 2 DOF Equations of Motion Legal
Nasser M. Abbasi
Contents
1 Newton method 3
positive direction
θ̇
spring
cart F
external force
damper
Notice that in the above, the angular motion is such that it is positive in counter clock wise,
which is the standard. The first step is always to draw the three basic diagrams. The first
diagram is the free body diagrams showing all the forces for all the bodies involved. In this
problem, there are two rigid bodies, The cart and the physical pendulum. The second diagram is
the velocity diagram, and finally the acceleration diagram. These diagrams are always useful
to draw before starting to solve the problem, even if we are just using the energy method to
find equation of motion, since drawing these diagrams help give one more physical insight and
understanding of the problem.
The cart the external force F which is controlling the motion of the cart, the spring and the
damper forces. There will also be reaction force at the joint where the physical pendulum is
attached to the cart. It is assumed that there is no friction on the ground. The following is the
free body diagram.
1
θ
mg
f2 f1
f1 f2
kx
F
cẋ
N
Mg
center of mass
ẋ ẋ
L L
2 θ̇ θ 2 θ̈ L 2 θ
2 θ̇
ẋ ẍ
The following diagram shows more clearly the forces resolved along physical pendulum body
axis to make it easier to refer to when writing down the force equations below. Direction of
reaction forces at joint where the pendulum is attached to the cart is arbitrary. As long as they
are opposite in directions between the cart and the pendulum.
y0
Body axes
x0
ẍ cos θ
θ ẍ
θ
θ
L
2 θ̈ mg
f2 f1
mg sin θ
L θ̇ 2
2
f2 mg cos θ
f1
θ θ f2 cos θ
f1 sin θ
kx ẍ sin θ
ẍ F
cẋ
x
image 4.ipe Nasser M. Abbasi 1/13/2017
Now that we have all the diagram completed, we can now apply Newton method.
2
1 Newton method
For the physical pendulum, resolving forces along arbitrary drawn body axes as shown above
(direction of the body positive x and y axes is not important), we obtain
X
Fx0 = max0
L 2
f1 + mg cos θ = m ẍ sin θ + θ̇
2
L 2
f1 = m ẍ sin θ + θ̇ − mg cos θ (1)
2
X
Fy0 = may0
L
−f2 − mg sin θ = m − θ̈ + ẍ cos θ
2
L
f2 = m θ̈ − ẍ cos θ − mg sin θ (2)
2
The moment equation around the center of mass of the pendulum (we should always take
moments around the center of mass of the rotating body, even though the pendulum is hinged at
one of its ends. If we take moment around the hinge, we need to then account for the inertia
forces due to motion of cart). The moment equation gives
τ = Ic θ̈
mL2
L
−f2 = θ̈ (3)
2 12
Notice the minus sign. This is because torque is clockwise and positive is counter clockwise.
The above three equations give the linear and angular equations of motion for the physical
pendulum. We now find the equation of motion for the cart
X
Fx = max
F − kx − cẋ − f1 sin θ + f2 cos θ = M ẍ (4)
We do not need to resolve forces in the y direction for the cart, since the cart does not move
in that direction. We ended up with 4 equations, and we have 4 unknowns: ẍ, θ̈, f1 , f2 . We are
really interested only in ẍ, θ̈. Before we continue, we notice one advantage of Newton method
over the energy method which will do next, which is that in Newton method, we obtain as a
side benefit knowledge of all the internal reaction forces between the bodies. This can be useful
depending on the application. Substituting (1,2) in (4) gives
f f
z }|1 { z }|2 {
L 2 L
F − kx − cẋ − m ẍ sin θ + θ̇ − mg cos θ sin θ + m θ̈ − ẍ cos θ − mg sin θ cos θ = M ẍ
2 2
2 L 2 L 2
F − kx − cẋ − mẍ sin θ + m θ̇ sin θ − mg cos θ sin θ + m θ̈ cos θ − mẍ cos θ − mg sin θ cos θ = M ẍ
2 2
L L
F − kx − cẋ − mẍ sin2 θ − mẍ cos2 θ + m θ̈ cos θ − m θ̇2 sin θ = M ẍ
2 2
L L
F − kx − cẋ − mẍ cos2 θ + sin2 θ + m θ̈ cos θ − m θ̇2 sin θ = M ẍ
2 2
Hence
L L
ẍ (M + m) + kx + cẋ − m θ̈ cos θ + m θ̇2 sin θ = F (t) (7)
2 2
Substituting (2) in (3) gives
3
f
2
z }| {
L L mL2
− m θ̈ − ẍ cos θ − mg sin θ = θ̈
2 2 12
L L2 L mL2
mẍ cos θ − m θ̈ + mg sin θ = θ̈
2 4 2 12
1 L 1 L
ẍ cos θ − θ̈ + g sin θ = θ̈
2 4 2 12
L L 1
θ̈ + = (ẍ cos θ + g sin θ)
12 4 2
3 ẍ cos θ + g sin θ
θ̈ = (8)
2 L
Equations (7,8) are the final result. Using these two equations we can now solve these coupled
differential equations for x (t) and θ (t).
Γ=T −V
1 2 1 2 2 1 L 1 2
= ẋ (M + m) + mL θ̇ − mẋLθ̇ cos θ − mg cos θ + kx
2 6 2 2 2
1 2 1 1 L 1
= ẋ (M + m) + mL2 θ̇2 − mẋLθ̇ cos θ − mg cos θ − kx2
2 6 2 2 2
There are two degrees of freedom: x and θ. The generalized forces in for x are given by
Qx = F − cẋ and the generalized force for θ is Qθ = 0. Now equation of motions are found. For x
d ∂Γ ∂Γ
− = Qx
dt ∂ ẋ ∂x
d 1
ẋ(M + m) − mLθ̇ cos θ + kx = F (t) − cẋ
dt 2
1 1
ẍ (M + m) + kx + cẋ − mLθ̈ cos θ + mLθ̇2 sin θ = F (t)
2 2
Which is the same result as Newton method. For θ
d ∂Γ ∂Γ
− =0
dt ∂ θ̇ ∂θ
4
But
∂Γ 1 1
= mL2 θ̇ − mẋL cos θ
∂ θ̇ 3 2
∂Γ 1 L
= mẋLθ̇ sin θ + mg sin θ
∂θ 2 2
d ∂Γ ∂Γ
Hence dt ∂ θ̇ − ∂θ = 0 becomes
d 1 2 1 1 L
θ̇mL − mLẋ cos θ − mẋLθ̇ sin θ + mg sin θ = 0
dt3 2 2 2
1 1 1 1 1
θ̈mL2 − mLẍ cos θ + mLẋθ̇ sin θ − mẋLθ̇ sin θ − mgL sin θ = 0
3 2 2 2 2
1 1 1
θ̈mL2 − mLẍ cos θ − mgL sin θ = 0
3 2 2
1 1 1
θ̈L − ẍ cos θ − g sin θ = 0
3 2 2
3 g sin θ + ẍ cos θ
θ̈ =
2 L