Professional Documents
Culture Documents
The Tool Measure Test of Fanuc VMC
The Tool Measure Test of Fanuc VMC
The Tool Measure Test of Fanuc VMC
3.To key in the basic data of Variable Marco 4.The Variable is #506 and from #525-#531
5.Check measure program O9799-9853 of Renishaw 6.Key in calibrate program (K100.253 is tool length.
S10. is tool and K12.75 is probe diameters)
9.Move tool and probe to center of X Y and Z 10mm 10.To execute the probe for tool calibrate measure
11.The value show #520-524 after calibrate measure 12.Key program for length measure (T8 is No.8)
15.Key program for diameter measure (D8 is No.8) 16.To execute the probe fortool diameter measure.
2.And send Renishaw program O9799 O9850 O9851 O9852 O9853 in to the CNC Memory.
Y+
#530=-2. #530=2.
#530=-1.
X+
4.The work coordinate value setting after program execute
#520: The value is basic tool relative work coordinate by probe of machine Z axis (Static)
#521: The value is basic tool relative work coordinate by probe of machine Z axis (Trends )
#522: The value is diameter of the probe
#523: The value is work coordinate by probe of machine X axis
#524: The value is work coordinate by probe of machine X ax