Professional Documents
Culture Documents
Practice
Practice
Steps:
1. Set prism height to 5ft on Back Sight Control point (For yellow groups B; For Orange groups A)
2. Set Total station on Control point (For yellow groups A; For Orange groups B)S
3. Shoot at back sight prism get angle measurement from ANG mode.
4. Press EDM mode, Press F3 (S/A), F1 (Input) and input prism constant “-30mm” then “F4”
(ENTER)
5. Key “F3”(T-P), “F1” (Input), and enter temperature them “F4” (ENTER), “F1” (INPUT) and enter
pressure them “F4” (ENTER).
6. Plug Data collector in to the instrument and turn it on.
(W_BLUE)
Browse