Professional Documents
Culture Documents
Daily Check Sheet 2017
Daily Check Sheet 2017
Daily Check Sheet 2017
No's Details Area to be checked Points to be checked Control Steps Time Method
Interval
1 Weight & Visual Weighing Machine and weighing machine table Clean Inspection table,Weighing machine All areas to be free from burr or Daily Visual
1 4
Inspection top and bottom area any foreign particles
5
Weight & Visual Check the level of four corner bottom If gap is available adjust the
2 Machine stability Daily Visual
Inspection screws for a equal gap screws 3
Weight & Visual Weighing Machine Water level The water level condition should be Adjust the leveling condition and
3 bring water level inside to the Daily Visual
Inspection within the circle circle
Weight & Visual Check the indication Green-ok Red-not Inform the incharge for
4
Inspection Check the buzzer condition(P) ok by placing OK and NG master sample correction for maintanence Daily Visual
parts
2
Weight & Visual Weighing Machine table tube light If there is problem,inform to 2
5
Inspection
Check the light ON and OFF conditions. incharge for correction for
maintanence
Daily Visual 1
*Daily check points(During Run) Usual・・・○ Abnormal・・・× Not Used ・・・ / After Correction ・・・ *Abnormality column 2
2
S.NO Area 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 HOD IN-CHARGE
1 Weighing
burr
Machine and around the table free from
2 Machine Stability
Checked by :