The document provides firmware upgrade instructions for a Shiro DSL805E device. The instructions are to log into the device's user interface, select the firmware upgrade option, browse for and select the upgrade file, and start the upgrade process, which takes approximately 5 minutes to complete. Users are warned that the configuration will be lost and to not power off the device during upgrading.
The document provides firmware upgrade instructions for a Shiro DSL805E device. The instructions are to log into the device's user interface, select the firmware upgrade option, browse for and select the upgrade file, and start the upgrade process, which takes approximately 5 minutes to complete. Users are warned that the configuration will be lost and to not power off the device during upgrading.
The document provides firmware upgrade instructions for a Shiro DSL805E device. The instructions are to log into the device's user interface, select the firmware upgrade option, browse for and select the upgrade file, and start the upgrade process, which takes approximately 5 minutes to complete. Users are warned that the configuration will be lost and to not power off the device during upgrading.
SHIRO DSL805E Note: Performing the instructions below will result into loosing the configuration previously saved on the CPE.
1. Log in to the user interface, http://192.168.1.1
2. If there is a prompt for authentication, input admin for both the username and password 3. Click on the Firmware Upgrade on the left panel under Advanced 4. Click on Browse, locate and select the file single.annexA.upgrade.img 5. Click on Update Gateway to start upgrading, it will take about approx 5 mins to upgrade to the new firmware. Note: DO NOT switch OFF CPE while upgrading 6. Clear Internet browser cache files. 7. Log in to the user interface and configure again for use