Professional Documents
Culture Documents
Steel Design To Eurocode 3: Combined Axial Compression and Bending
Steel Design To Eurocode 3: Combined Axial Compression and Bending
3(4)
Steel Design to Eurocode 3
Members which are subjected to combined
Combined axial bending and axial compression should satisfy
both:
compression and bending
Equation 6.61
Uniform members in bending and axial
compression demonstrate complex structural
behaviour
Clause 6.3.3(2)
The resistance of the cross-sections at each end Χy reduction factors due to flexural buckling
of the member should also satisfy the from clause 6.3.1
χz
requirements given in Clause 6.2
Class 1 2 3 4
AI A A A Aeff
ΔMY,Ed 0 0 0 eN,yNEd
ΔMz,Ed 0 0 0 eN,zNEd
Annex A (Method 1)
• Use Table A.1 of EN 1993-1-1
Annex B (Method 2)
• Use Table B.1 of EN 1993-1-1 for members
not susceptible to LTB
• Use Table B.2 of EN 1993-1-1for members
that are susceptible to LTB.
Table B.1 - Interaction factors kij for members not susceptible to torsional deformations
Table B.2 - Interaction factors kij for members susceptible to torsional deformations
Table B.3 Equivalent uniform factors Cm in Tables B.1 and B.2