Professional Documents
Culture Documents
Hoja de Datos 324
Hoja de Datos 324
1FEATURES DESCRIPTION
• 2-kV ESD Protection for: These devices consist of four independent high-gain
frequency-compensated operational amplifiers that
– LM224K, LM224KA are designed specifically to operate from a single
– LM324K, LM324KA supply over a wide range of voltages. Operation from
– LM2902K, LM2902KV, LM2902KAV split supplies also is possible if the difference
between the two supplies is 3 V to 32 V (3 V to 26 V
• Wide Supply Ranges
for the LM2902 device), and VCC is at least 1.5 V
– Single Supply: 3 V to 32 V (26 V for more positive than the input common-mode voltage.
LM2902) The low supply-current drain is independent of the
– Dual Supplies: ±1.5 V to ±16 V (±13 V for magnitude of the supply voltage.
LM2902) Applications include transducer amplifiers, dc
• Low Supply-Current Drain Independent of amplification blocks, and all the conventional
Supply Voltage: 0.8 mA Typ operational-amplifier circuits that now can be more
easily implemented in single-supply-voltage systems.
• Common-Mode Input Voltage Range Includes
For example, the LM124 device can be operated
Ground, Allowing Direct Sensing Near Ground directly from the standard 5-V supply that is used in
• Low Input Bias and Offset Parameters digital systems and provides the required interface
– Input Offset Voltage: 3 mV Typ electronics, without requiring additional ±15-V
MM A Versions: 2 mV Typ supplies.
– Input Offset Current: 2 nA Typ LM124 . . . D, J, OR W PACKAGE
LM124A . . . J OR W PACKAGE
– Input Bias Curren: 20 nA Typ
LM224, LM224A, LM224K, LM224KA . . . D OR N PACKAGE
MMA Versions: 15 nA Typ LM324, LM324K . . . D, N, NS, OR PW PACKAGE
• Differential Input Voltage Range Equal to LM324A . . . D, DB, N, NS, OR PW PACKAGE
Maximum-Rated Supply Voltage: LM324KA . . . D, N, NS, OR PW PACKAGE
LM2902 . . . D, N, NS, OR PW PACKAGE
32 V (26 V for LM2902) LM2902K . . . D, DB, N, NS, OR PW PACKAGE
• Open-Loop Differential Voltage Amplification: LM2902KV, LM2902KAV . . . D OR PW PACKAGE
100 V/mV Typ (TOP VIEW)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date. Copyright © 1975–2014, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014 www.ti.com
This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more
susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.
4OUT
1IN−
4IN−
NC OUT
IN+
+
3 2 1 20 19
1IN+ 4 18 4IN+
NC 5 17 NC
VCC 6 16 GND
NC 7 15 NC
2IN+ 8 14 3IN+
9 10 11 12 13
2IN−
3IN−
2OUT
NC
3OUT
NC − No internal connection
OUT
IN−
†
IN+ ≈50-µA
Current
†
Regulator
GND
To Other
Amplifiers
COMPONENT COUNT
(total device)
Epi-FET 1
Transistors 95
Diodes 4
Resistors 11
Capacitors 4
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating
Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+, with respect to IN−.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(6) Maximum power dissipation is a function of TJ(max), θJA, and TC. The maximum allowable power dissipation at any allowable case
temperature is PD = (TJ(max) – TC)/θJC. Operating at the absolute maximum TJ of 150°C can affect reliability.
(7) The package thermal impedance is calculated in accordance with MIL-STD-883
ESD Protection
TEST CONDITIONS TYP UNIT
Human-Body Model LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV ±2 kV
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM124, LM224 LM324, LM324K
PARAMETER TEST CONDITIONS (1) TA (2) UNIT
MIN TYP (3) MAX MIN TYP (3) MAX
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 30 V for the others.
(2) Full range is –55°C to 125°C for LM124, –25°C to 85°C for LM224, and 0°C to 70°C for LM324.
(3) All typical values are at TA = 25°C
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM2902 LM2902V
PARAMETER TEST CONDITIONS (1) TA (2) UNIT
MIN TYP (3) MAX MIN TYP (3) MAX
Non-A-suffix 25°C 3 7 3 7
VCC = 5 V to MAX, devices Full range 10 10
VIO Input offset voltage VIC = VICRmin, mV
VO = 1.4 V A-suffix 25°C 1 2
devices Full range 4
ΔVIO/ΔT Input offset voltage temperature drift RS = 0 Ω Ful range 7 μV/°C
25°C 2 50 2 50
IIO Input offset current VO = 1.4 V nA
Full range 300 150
ΔIIO/ΔT Input offset voltage temperature drift Ful range 10 pA/°C
25°C –20 –250 –20 –250
IIB Input bias current VO = 1.4 V nA
Full range –500 –500
0 to 0 to
25°C
VCC – 1.5 VCC – 1.5
VICR Common-mode input voltage range VCC = 5 V to MAX V
0 to 0 to
Full range
VCC – 2 VCC – 2
RL = 2 kΩ 25°C
RL = 10 kΩ 25°C VCC – 1.5 VCC – 1.5
VOH High-level output voltage V
RL = 2 kΩ Full range 22 26
VCC = MAX
RL ≥ 10 kΩ Full range 23 24 27
VOL Low-level output voltage RL ≤ 10 kΩ Full range 5 20 5 20 mV
VCC = 15 V, 25°C 25 100 25 100
Large-signal differential voltage
AVD VO = 1 V to 11 V, V/mV
amplification Full range 15 15
RL ≥ 2 kΩ
CMRR Common-mode rejection ratio VIC = VICRmin 25°C 50 80 60 80 dB
Supply-voltage rejection ratio
kSVR 25°C 50 100 60 100 dB
(ΔVCC /ΔVIO)
VO1/ VO2 Crosstalk attenuation f = 1 kHz to 20 kHz 25°C 120 120 dB
VCC = 15 V, 25°C –20 –30 –60 –20 –30 –60
VID = 1 V, Source
VO = 0 Full range –10 –10
mA
IO Output current VCC = 15 V, 25°C 10 20 10 20
VID = –1 V, Sink
VO = 15 V Full range 5 5
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. MAX
VCC for testing purposes is 26 V for LM2902 and 32 V for LM2902V.
(2) Full range is –40°C to 125°C for LM2902.
(3) All typical values are at TA = 25°C.
Electrical Characteristics
at specified free-air temperature, VCC = 5 V (unless otherwise noted)
LM124A LM224A LM324A, LM324KA
PARAMETER TEST CONDITIONS (1) TA (2) UNIT
MIN TYP (3) MAX MIN TYP (3) MAX MIN TYP (3) MAX
VCC = 5 V to 30 V, 25°C 2 2 3 2 3
Input offset
VIO VIC = VICRmin, mV
voltage Full range 4 4 5
VO = 1.4 V
Common-mode
CMRR VIC = VICRmin 25°C 70 70 80 65 80 dB
rejection ratio
Supply-voltage
kSVR rejection ratio 25°C 65 65 100 65 100 dB
(ΔVCC /ΔVIO)
Crosstalk
VO1/ VO2 f = 1 kHz to 20 kHz 25°C 120 120 120 dB
attenuation
VCC = 15 V, 25°C –20 –20 –30 –60 –20 –30 –60
VID = 1 V, Source
VO = 0 Full range –10 –10 –10
mA
IO Output current VCC = 15 V, 25°C 10 10 20 1 20
VID = –1 V, Sink
VO = 15 V Full range 5 5 5
(1) All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified.
(2) Full range is –55°C to 125°C for LM124A, –25°C to 85°C for LM224A, and 0°C to 70°C for LM324A.
(3) All typical values are at TA = 25°C.
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
LM124, LM124A, LM224, LM224A, LM324, LM324A, LM2902, LM2902V
LM224K, LM224KA, LM324K, LM324KA, LM2902K, LM2902KV, LM2902KAV
www.ti.com SLOS066V – SEPTEMBER 1975 – REVISED JANUARY 2014
Operating Conditions
VCC = ±15 V, TA = 25°C
PARAMETER TEST CONDITIONS TYP UNIT
SR Slew rate at unity gain RL = 1 MΩ, CL = 30 pF, VI = ±10 V (see Figure 1) 0.5 V/μs
B1 Unity-gain bandwidth RL = 1 MΩ, CL = 20 pF (see Figure 1) 1.2 MHz
Vn Equivalent input noise voltage RS = 100 Ω, VI = 0 V, f = 1 kHz (see Figure 2) 35 nV/√Hz
900 Ω
VCC+
VCC+
− 100 Ω
VO −
+ VI = 0 V
VI VO
RS
CL +
VCC− RL
VCC−
REVISION HISTORY
Product Folder Links: LM124 LM124A LM224 LM224A LM324 LM324A LM2902 LM2902V LM224K LM224KA
LM324K LM324KA LM2902K LM2902KV LM2902KAV
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
PACKAGING INFORMATION
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
5962-7704301VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-7704301VC
A
LM124JQMLV
5962-9950403V9B ACTIVE XCEPT KGD 0 100 TBD Call TI N / A for Pkg Type -55 to 125
5962-9950403VCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 5962-9950403VC
A
LM124AJQMLV
77043012A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043012A
LM124FKB
7704301CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704301CA
LM124JB
7704301DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704301DA
LM124WB
77043022A ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043022A
LM124AFKB
7704302CA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704302CA
LM124AJB
7704302DA ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704302DA
LM124AWB
JM38510/11005BCA ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 JM38510
/11005BCA
LM124ADR OBSOLETE SOIC D 14 TBD Call TI Call TI -55 to 125
LM124AFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043022A
LM124AFKB
LM124AJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM124AJ
LM124AJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704302CA
LM124AJB
LM124AWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704302DA
LM124AWB
LM124D ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM124
& no Sb/Br)
LM124DG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM124
& no Sb/Br)
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
LM124DR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM124
& no Sb/Br)
LM124DRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -55 to 125 LM124
& no Sb/Br)
LM124FKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type -55 to 125 77043012A
LM124FKB
LM124J ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM124J
LM124JB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704301CA
LM124JB
LM124N OBSOLETE PDIP N 14 TBD Call TI Call TI -55 to 125
LM124W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 LM124W
LM124WB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type -55 to 125 7704301DA
LM124WB
LM224AD ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A
& no Sb/Br)
LM224ADG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A
& no Sb/Br)
LM224ADR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM224A
& no Sb/Br)
LM224ADRE4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A
& no Sb/Br)
LM224ADRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224A
& no Sb/Br)
LM224AN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224AN
(RoHS)
LM224ANE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224AN
(RoHS)
LM224D ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224
& no Sb/Br)
LM224DG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224
& no Sb/Br)
LM224DR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -25 to 85 LM224
& no Sb/Br)
LM224DRG3 ACTIVE SOIC D 14 2500 Green (RoHS CU SN Level-1-260C-UNLIM -25 to 85 LM224
& no Sb/Br)
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
LM224DRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224
& no Sb/Br)
LM224KAD ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA
& no Sb/Br)
LM224KADG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA
& no Sb/Br)
LM224KADR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA
& no Sb/Br)
LM224KADRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224KA
& no Sb/Br)
LM224KAN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224KAN
(RoHS)
LM224KANE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224KAN
(RoHS)
LM224KDR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224K
& no Sb/Br)
LM224KDRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -25 to 85 LM224K
& no Sb/Br)
LM224KN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224KN
(RoHS)
LM224KNE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224KN
(RoHS)
LM224N ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224N
(RoHS)
LM224NE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -25 to 85 LM224N
(RoHS)
LM2902D ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902DG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902DR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902DRE4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902DRG3 ACTIVE SOIC D 14 2500 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
Addendum-Page 3
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
LM2902DRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902KAVQDR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA
& no Sb/Br)
LM2902KAVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA
& no Sb/Br)
LM2902KAVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA
& no Sb/Br)
LM2902KAVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KA
& no Sb/Br)
LM2902KD ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K
& no Sb/Br)
LM2902KDB ACTIVE SSOP DB 14 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
LM2902KDBE4 ACTIVE SSOP DB 14 80 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
LM2902KDG4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K
& no Sb/Br)
LM2902KDR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K
& no Sb/Br)
LM2902KN ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 125 LM2902KN
(RoHS)
LM2902KNE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 125 LM2902KN
(RoHS)
LM2902KNSR ACTIVE SO NS 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K
& no Sb/Br)
LM2902KNSRG4 ACTIVE SO NS 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902K
& no Sb/Br)
LM2902KPW ACTIVE TSSOP PW 14 90 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
LM2902KPWE4 ACTIVE TSSOP PW 14 90 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
LM2902KPWR ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
LM2902KPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902K
& no Sb/Br)
Addendum-Page 4
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
LM2902KVQDR ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV
& no Sb/Br)
LM2902KVQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV
& no Sb/Br)
LM2902KVQPWR ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV
& no Sb/Br)
LM2902KVQPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902KV
& no Sb/Br)
LM2902N ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU | CU SN N / A for Pkg Type -40 to 125 LM2902N
(RoHS)
LM2902NE4 ACTIVE PDIP N 14 25 Pb-Free CU NIPDAU N / A for Pkg Type -40 to 125 LM2902N
(RoHS)
LM2902NSR ACTIVE SO NS 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 LM2902
& no Sb/Br)
LM2902PW ACTIVE TSSOP PW 14 90 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902
& no Sb/Br)
LM2902PWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI -40 to 125
LM2902PWR ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU | CU SN Level-1-260C-UNLIM -40 to 125 L2902
& no Sb/Br)
LM2902PWRE4 ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902
& no Sb/Br)
LM2902PWRG3 ACTIVE TSSOP PW 14 2000 Green (RoHS CU SN Level-1-260C-UNLIM -40 to 125 L2902
& no Sb/Br)
LM2902PWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM -40 to 125 L2902
& no Sb/Br)
LM2902QN OBSOLETE PDIP N 14 TBD Call TI Call TI -40 to 125
LM324AD ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A
& no Sb/Br)
LM324ADBLE OBSOLETE SSOP DB 14 TBD Call TI Call TI
LM324ADBR ACTIVE SSOP DB 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A
& no Sb/Br)
LM324ADBRE4 ACTIVE SSOP DB 14 2000 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A
& no Sb/Br)
LM324ADE4 ACTIVE SOIC D 14 50 Green (RoHS CU NIPDAU Level-1-260C-UNLIM 0 to 70 LM324A
& no Sb/Br)
Addendum-Page 5
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
Addendum-Page 6
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
Addendum-Page 7
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Orderable Device Status Package Type Package Pins Package Eco Plan Lead/Ball Finish MSL Peak Temp Op Temp (°C) Device Marking
(1) Drawing Qty (2) (6) (3) (4/5)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
Addendum-Page 8
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.
(5)
Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation
of the previous line and the two combined represent the entire Device Marking for that device.
(6)
Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish
value exceeds the maximum column width.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 9
PACKAGE OPTION ADDENDUM
www.ti.com 4-Dec-2014
Addendum-Page 10
PACKAGE MATERIALS INFORMATION
www.ti.com 20-Dec-2014
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com 20-Dec-2014
Pack Materials-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com 20-Dec-2014
Pack Materials-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com 20-Dec-2014
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
LM2902KVQPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902KVQPWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM2902NSR SO NS 14 2000 367.0 367.0 38.0
LM2902PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM2902PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM2902PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM2902PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM324ADBR SSOP DB 14 2000 367.0 367.0 38.0
LM324ADR SOIC D 14 2500 364.0 364.0 27.0
LM324ADR SOIC D 14 2500 367.0 367.0 38.0
LM324ADRG4 SOIC D 14 2500 367.0 367.0 38.0
LM324ANSR SO NS 14 2000 367.0 367.0 38.0
LM324APWR TSSOP PW 14 2000 364.0 364.0 27.0
LM324APWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324APWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
LM324DR SOIC D 14 2500 333.2 345.9 28.6
LM324DR SOIC D 14 2500 364.0 364.0 27.0
LM324DRG3 SOIC D 14 2500 364.0 364.0 27.0
LM324DRG4 SOIC D 14 2500 333.2 345.9 28.6
LM324KADR SOIC D 14 2500 367.0 367.0 38.0
LM324KANSR SO NS 14 2000 367.0 367.0 38.0
LM324KAPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324KDR SOIC D 14 2500 367.0 367.0 38.0
LM324KNSR SO NS 14 2000 367.0 367.0 38.0
LM324KPWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324PWR TSSOP PW 14 2000 364.0 364.0 27.0
LM324PWR TSSOP PW 14 2000 367.0 367.0 35.0
LM324PWRG3 TSSOP PW 14 2000 364.0 364.0 27.0
LM324PWRG4 TSSOP PW 14 2000 367.0 367.0 35.0
Pack Materials-Page 4
MECHANICAL DATA
0,38
0,65 0,15 M
0,22
28 15
0,25
0,09
5,60 8,20
5,00 7,40
Gage Plane
1 14 0,25
A 0°–ā8° 0,95
0,55
Seating Plane
PINS **
14 16 20 24 28 30 38
DIM
4040065 /E 12/01
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2014, Texas Instruments Incorporated