The document provides calculations to check the crack width of walls for a hockey stadium in Hyderabad. It details parameters like the grade of concrete, moment at the section considered, depth and breadth dimensions, reinforcement details, and performs calculations of neutral axis, cracked moment of inertia, service stress, strain, and design surface crack width using formulas from IS 456:2000. The calculated crack width of 0.09mm is below the permissible limit of 0.3mm.
The document provides calculations to check the crack width of walls for a hockey stadium in Hyderabad. It details parameters like the grade of concrete, moment at the section considered, depth and breadth dimensions, reinforcement details, and performs calculations of neutral axis, cracked moment of inertia, service stress, strain, and design surface crack width using formulas from IS 456:2000. The calculated crack width of 0.09mm is below the permissible limit of 0.3mm.
The document provides calculations to check the crack width of walls for a hockey stadium in Hyderabad. It details parameters like the grade of concrete, moment at the section considered, depth and breadth dimensions, reinforcement details, and performs calculations of neutral axis, cracked moment of inertia, service stress, strain, and design surface crack width using formulas from IS 456:2000. The calculated crack width of 0.09mm is below the permissible limit of 0.3mm.
PROJECT: HOCKEY STADIUM AT HYDERABAD DOCUMENT NO. DATE
TITLE: CRACK WIDTH CALCULATION FOR WALLS DESIGNED CHECKED SHEET
PHK SSM
CHECK FOR CRACK WIDTH : as per IS 456 : 2000 ANNEX F
GRADE OF CONCRETE fck = 30 N/mm2
MOMENT AT THE SECTION CONSIDERED M = 1.5 tm
DEPTH OF THE SECTION D = 450 mm
DEPTH OF THE FLANGE Df = 150 mm
EFFECTIVE DEPTH d = 407.5 mm
BREADTH OF THE FLANGE Bf = 1000 mm
COVER TO THE COMPRESSION STEEL d' = 54.5 mm
DISTANCE FROM THE POINT CONSIDERED TO THE SURFACE OF THE NEAREST acr = 92.7 mm LONGITUDINAL BAR
MINIMUM COVER TO THE LONGITUDINAL BAR Cmin = 54.5 mm
THE WIDTH OF THE SECTION AT THE bt = 1000 mm
CENTROID OF THE TENSION STEEL
MODULAR RATIO m = Es/Ec 8
AREA OF TENSION STEEL Ast = 400 mm2
AREA OF COMPRESSION STEEL Asc = 0 mm2
NEUTRAL AXIS x = 47.97 mm
CRACKED MOMENT OF INERTIA Icr = 4.50E+08 b
SERVICE STRESS IN TENSION fs = m x M x(d-x)/Icr 93.96 N/mm2 REINFORCEMENT MODULUS OF ELASTICITY OF STEEL Es = 2.00E+05 N/mm2 DISTANCE FROM THE COMPRESSION FACE TO THE POINT AT WHICH THE CRACK WIDTH a' = 150 mm IS BEING CALCULATED STRAIN AT THE LEVEL CONSIDERED, e1 = ((D-x)/(d-x)) x fs/Es 0.000525
em = e1- (bt(d-x)(a'-x) ) 0.000405 ###
3EsAst(D-x)
DESIGN SURFACE CRACK WIDTH Wcr = 3 x acr x em 0.09 mm