Professional Documents
Culture Documents
3530 Lit 42 PDF
3530 Lit 42 PDF
Series 3530
Quantek Pumps
50
160
140
40
120
TOTAL DYNAMIC HEAD
30 100
1x 11⁄4 x 6
⁄2 – 3 HP
1
3500 RPM
80
11⁄4 x 11⁄2 x 6
20 3
⁄4 – 5 HP 11⁄2 x 2 x 6
60 3500 RPM 1– 5 HP
3500 RPM
40
10
1x 11⁄4 x 6
20 1750 RPM 11⁄4 x 11⁄2 x 6
1750 RPM 11⁄2 x 2 x 6
1750 RPM
0 0
0 20 40 60 80 100 120 140 160 U.S. GPM
0 5 10 15 20 25 30 35 m3/hr
CAPACITY
FEATURES SPECIFICATIONS
1. Superior Materials of Construction: Complete AISI 316L Capacities to:
stainless steel liquid handling components and mounting 75 GPM (283L/min) at 1750 RPM
bracket for corrosion resistance, quality appearance, and 170 GPM (643L/min) at 3500 RPM
improved strength and ductility. Not recommended for operation beyond printed curve.
2. High Efficiency Impeller: Enclosed impeller with unique Heads to:
floating seal ring design maintains maximum efficiencies 39 feet (11m) at 1750 RPM
over the life of the pump without adjustment. 150 feet (50m) at 3500 RPM
3. Casing and Adapter Features: Stainless steel construc- Working pressures to:
tion with NPT threaded, centerline connections, easily 125 PSIG (9 bars)
accessible vent, prime and drain connections with stain-
Maximum temperatures to:
less steel plugs.
225°F (107°C) with standard seal or 250°F (121°C) with
4. Mechanical Seal: Standard John Crane Type 21 with optional high temperature seal.
Carbon versus Silicon-Carbide faces, Viton elastomers,
Direction of rotation:
and 316 stainless metal parts. Optional high temperature
Clockwise when viewed from motor end.
seal available.
Motor:
5. Multiple Discharge Positions: Standard pump supplied
NEMA 56J frame. 1750 RPM, 1/2 HP. 3500 RPM, 1/2 through 5
with top vertical discharge. Casing can be field rotated
HP. Open drip-proof and totally enclosed fan-cooled enclo-
every 45° for flexible installations.
sures. Stainless steel shaft with ball bearings.
Single phase: Voltage 115/230 ODP and TEFC. (3 HP model –
230V only) Built-in overload with auto-reset provided.
Three phase: Voltage 208-230/460 ODP and TEFC.
All standard 3500 RPM ODP and TEFC motors supplied by
B&G have minimum of 1.15 service factor. Standard catalog
units may utilize available service factor.
Note: For three phase motors, overload protection must be
provided in starter unit. Starter and heaters must be ordered
separately.
2
MATERIALS OF CONSTRUCTION
349
412B
3
SERIES 3530 PUMP PERFORMANCE CURVES
METERS FEET
NPSH R – FEET 1 x 11/4 x 6
50 160 3500 R.P.M.
5'
6'
61⁄8" 45 8'
48
140
50 10'
40 5 3⁄4" 51 12'
120 1 x 11/4 x 6
52 51 3500 RPM
50
53⁄16" 53 48 EFF % IMPELLER
100 DIAMETER HP
30 3
HP 47/16
1
/2
43⁄4" 3
/4
TOTAL DYNAMIC HEAD
43/4
3
/4
80 1
47⁄16" 2H 53/16 1
20 P 11/2
60 53/4 11/2
1 1⁄2 2
1H HP 61/8 2
P 3
40
10
⁄2
1
HP ⁄4
3
HP
20
0 0
0 10 20 30 40 50 60 U.S. GPM
0 5 10 m3⁄ hr
CAPACITY
METERS FEET
NPSH R – FEET 1 x 11/4 x 6
12 40 1750 R.P.M.
5'
61⁄8" 6'
45
35
48 50 8'
10 10'
53⁄4" 51 12'
30
52 51 1 x 11/4 x 6
TOTAL DYNAMIC HEAD
8 5 ⁄16"
3 50 48 EFF % 1750 RPM
53 IMPELLER
25
DIAMETER HP
43⁄4" 47/16
20 43/4
6
53/16 1
/2
47⁄16" 53/4
61/8
15
4
10
2
5
0 0
0 5 10 15 20 25 30 U.S. GPM
0 1 2 3 4 5 6 7 8 m3⁄ hr
CAPACITY
4
SERIES 3530 PUMP PERFORMANCE CURVES
47⁄8" 66 IMPELLER
25 DIAMETER HP
80
45⁄8" /4
3
37/8 1
70 1
41/4
20 41⁄4" 11/2
5
60 HP 45/8 11/2
2
47/8 2
15 50 3
37⁄8"
3 51/16 2
40 HP 3
3
⁄
3 5 /4
1
10 4
H 5
30 P 2 3
11 HP 51/2
1 ⁄2 H 5
20 HP P 5 /16
15
5
5
10
0 20 40 60 80 100 120 140 160 U.S. GPM
0 5 10 15 20 25 30 35 m3⁄ hr
CAPACITY
METERS FEET
NPSHR – FEET
11/4 x 11/2 x 6
35
5' 7' 1750 R.P.M.
50 55
10 32.5
5 15⁄16" 58 10'
15' 20'
9 30
5 ⁄2"
1
60
27.5 51⁄4"
8 62 58 11/4 x 11/2 x 6
TOTAL DYNAMIC HEAD
25 1750 RPM
5 ⁄16"
1
64 55 EFF %
7 IMPELLER
22.5 DIAMETER HP
47⁄8" 66
37/8
20 41/4
6 45⁄8"
45/8
17.5 47/8
5 41⁄4" 51/16 1
/2
15 51/4
51/2
4 515/16
12.5
37⁄8"
3 10
7.5
2
5
0 10 20 30 40 50 60 70 80 U.S. GPM
0 2 4 6 8 10 12 14 16 m3⁄ hr
CAPACITY
5
SERIES 3530 PUMP PERFORMANCE CURVES
METERS FEET
NPSH R – FEET
35 50 5' 11/2 x 2 x 6
120 55 3500 R.P.M.
60 6' 64
30 53⁄8" 7' 10' 11/2 x 2 x 6
66 17'
3500 RPM
100
5H IMPELLER
5" P 66 EFF % DIAMETER HP
TOTAL DYNAMIC HEAD
25 35/8 1
43⁄4" 64 11/2
80 11/2
45⁄8" 41/16 2
20 43/8 2
43⁄8" 60 3
45/8 2
60 3
41⁄16" 55 3
15 43/4 5
35⁄8" 5 3
5
40 5 /8
3
5
10 1H 3H
P P
1 1⁄ 2H
20 2 HP P
5
0 0
0 20 40 60 80 100 120 140 160 U.S. GPM
0 5 10 15 20 25 30 35 m3⁄ hr
CAPACITY
METERS FEET
43/8
4 ⁄4"
3
64 45/8 1
/2
6 20
45⁄8" 43/4
60 5
5 43⁄8" 53/8
15
41⁄16" 55 EFF %
4
35⁄8"
3 10
2
5
1
0 0
0 10 20 30 40 50 60 70 80 U.S. GPM
0 2 4 6 8 10 12 14 16 18 m3⁄ hr
CAPACITY
6
SERIES 3530 DIMENSION – INCHES (MM)
DISCHARGE
41⁄4 C MAX.
Y W
(108)
FILL AND VENT 2 3⁄4
1 PHASE UNITS ONLY (70)
X
SUCTION
6 5⁄16
(160)
MAX.
311/16
30° 41⁄4 4 (94)
TYP. (108) (102) MAX.
DISCHARGE 41 ⁄4 Y W C MAX.
(108)
X
SUCTION
65⁄16
(160)
MAX.
311⁄16
41 ⁄4 (94)
30 (108) 4 MAX.
TYP°
(102)
13 ⁄ 32 (10)
DIA. HOLE
DRAIN 4-MOUNTING HOLES
215⁄16 215⁄16 L 5 131⁄32
(75) 8 1 ⁄ 8 (75) (127) 81⁄4 (50)
(206) (210)
SUCTION DISCHARGE
81/2 (216)
41/4 C. MAX.
(108) Y W
61/2 (165)
DIA.
31/2
41/4 (89)
(108)
1/3 (8)
7/8
3 47/8 (22)
M (76) (124)
33/4 61/2
DRAIN PLUG 3/8 (95) (165)
All 1750 RPM Motors and 5 HP, ODP and TEFC – 3500 RPM