Professional Documents
Culture Documents
Series 42TL: Tank Level Sensor
Series 42TL: Tank Level Sensor
P D
Materials of Construction
P Body and Flanges
Carbon Steel, optional 316 Stainless Steel
P Elastomer Diaphragm
Buna-N, EPDM, Viton®, Food Grade Rubber
P Fill Fluid
Silicone Oil
Red Valve Company, Inc. • 700 North Bell Avenue, Carnegie, PA 15106 • 412-279-0044 • FAX 412-279-7878 • www.redvalve.com (5-01)
Series 40TL-M
Tank Level Sensor
The Red Valve Tank Level Sensors are not affected by foam-
P Accurate Dependable Level Readings + _ 2” ing, ice and other conditions that can cause errors in Ultra-
P Can be flushed or rodded clean without sonic and capacitance Level Sensors. The Red Valve Tank
removing from tank or dissembly Level Sensor uses a high sensitivity, solid state, pressure trans-
P Full 360º pressure reading mitter that is completely isolated from the process fluid by an
P Integral LED display available elastomer sleeve that transmits pressure through a fluid fill.
P Simple design
P Available for both vented and pressurized tanks The Pressure Transmitter is available to sense gauge pressure
for vented tanks and differential pressure for pressurized tanks.
P 4-20 mA output It can easily be calibrated for process fluid density or specific
gravity in any height of tank. The output signal is 4-20 mA. An
integral LED display is available and can be calibrated in vir-
tually any units, e.g. percentages, inches H20, etc.
H ,,
,,,,
,,
,,
Materials of Construction
,,,,
,,
P Body and Flanges D
Carbon Steel, optional 316 Stainless Steel
P Elastomer Diaphragm ,,,,
Buna-N, EPDM, Viton®, Food Grade Rubber ,,,,
P Fill Fluid ,,,,
L
Silicone Oil
Red Valve Company, Inc. • 700 North Bell Avenue, Carnegie, PA 15106 • 412-279-0044 • FAX 412-279-7878 • www.redvalve.com (5-01)
Series 40TL
Tank Level Sensor
P Accurate Dependable Level Readings +
_ 2” The Red Valve Tank Level Sensors are not affected by foam-
P Can be flushed or rodded clean without ing, ice and other conditions that can cause errors in Ultra-
removing from tank or dissembly sonic and capacitance Level Sensors. The Red Valve Tank
P Full 360º pressure reading Level Sensor uses a high sensitivity, solid state, pressure trans-
mitter that is completely isolated from the process fluid by an
P Integral LED display available
elastomer sleeve that transmits pressure through a fluid fill.
P Simple design
P Available for both vented and pressurized tanks The Pressure Transmitter is available to sense gauge pressure
P 4-20 mA output for vented tanks and differential pressure for pressurized tanks.
It can easily be calibrated for process fluid density or specific
gravity in any height of tank. The output signal is 4-20 mA. An
integral LED display is available and can be calibrated in vir-
tually any units, e.g. percentages, inches H20, etc.
H ,,,,
,,,,
,,
,,,,
,,
Materials of Construction
P Body and Flanges D
Carbon Steel, optional 316 Stainless Steel
P Elastomer Diaphragm ,,,,
,,,,
Buna-N, EPDM, Viton®, Food Grade Rubber ,,,,
L
P Fill Fluid
Silicone Oil
Red Valve Company, Inc. • 700 North Bell Avenue, Carnegie, PA 15106 • 412-279-0044 • FAX 412-279-7878 • www.redvalve.com (5-01)