Professional Documents
Culture Documents
Paulymatcsynthesispaper
Paulymatcsynthesispaper
Paulymatcsynthesispaper
Elizabeth L. Pauly
PID A416 416 05
April 8, 2018
Learning Goals 2
Introduction
I am a daughter, sister, friend, runner, traveler, student, and teacher. These are just a few
words that help describe who I am today. I graduated from Michigan State University in 2013
with a degree in elementary education, and this contributed to who I am today. I desired to learn
more about education, and since it was difficult to just choose only one path, I chose to focus my
degree on both mathematics and language arts. After graduating, I was grateful to have the
opportunity to teach first grade for three years in a rural/suburban, Title 1 school in Michigan. It
was here that I was led to my next plan of study as I began my Master of Arts in Teaching and
Curriculum (MATC) in 2016. Once again, I struggled to decide on only one focus, so I ended up
very passionate about both of these areas of education and am thankful to have learned so much
through these two years of the program. Throughout the nine classes I took during this program,
I focused on, discussed, and worked through many different learning goals. These learning goals
for each class ultimately supported my growth and mastery of the program goals and standards.
Towards the end of my MATC program, I moved to Georgia where I am currently teaching in an
urban, Title 1 school. It is here where I am able to apply all of what I have learned to support my
It was when I first began teaching that I remember being introduced to the concept of
learning goals. I remember dissecting various learning goals in class and thinking thoughtfully
about what each part of the goal meant. I remember coming up with and editing learning goals
for lessons I taught. I remember professional development sessions about learning goals and
“learning goals/targets” being a phrase spoken in almost every staff meeting. Alongside these
memories, I also remember hearing veteran teachers discuss how being required to write and
Learning Goals 3
discuss the learning goal for each lesson, each day being cumbersome, and students learned just
fine before this administrative requirement. I admit, when I first started teaching in my own
classroom, developing, and writing/changing these learning goals on the board each day was
time consuming and it was a part of my planning that I did not look forward to. Looking back,
even with the many classes and professional development about learning goals, I did not
understand or see how powerful these learning goals were for both my students and myself.
Having the opportunity to think back on my MATC program, one thing that stands out to
me is that I developed a stronger understanding of learning goals and how crucial they are for
both students and teachers. After reflection, learning goals have become a token or symbol that I
can use to think about my time throughout the MATC program. The MATC program itself has
three program goals and six program standards that all students are working towards. After two
years of working towards these standards and goals and having this opportunity to dissect them, I
now understand them and will continue to develop them in my field. As I worked towards my
own learning goals in this program, I developed a new understanding for how learning goals can
be used for whole group, small group, and individual learning in academics, behavior, and
social/emotional learning.
Over the course of this program, I learned how important learning goals are for students
to understand what they will be learning and how they will accomplish that goal. Empowering
my students with the ability to take control of their own learning is something that I strive for. I
desire for them to have the skills to value learning and use their unique strengths and weaknesses
Lesson Plan for a student who struggled to segment words. This class and artifact helped me
develop a deeper “understanding of understanding of subject matter, how to teach it, and how to
Learning Goals 4
design curriculum, instruction, and assessment” (MATC Standard 2). Looking back at this
lesson, the learning goal was, “I can segment words orally and say the first and last sound I
hear”. This learning goal supported my student taking control of her own learning by clearly
describing what she will be learning/doing and how she will accomplish that. When I re-read
Artifact 3: Phonological Awareness Lesson Plan, I realized how important it was that I
understood and held the “pedagogical knowledge, skills, and repertoire” (MATC Goal 2) in
order to teach this phonological awareness lesson. In order to effectively teach this particular
learning goal, I had to understand phonemic awareness skills and the order that students learn
these skills in. I had to thoroughly understand segmentation and how I would explicitly teach
this skill. I also had to understand how to model this skill, lead guided practice, implement
independent work, assess, and plan for next steps. I had to work towards and reach these goals
and standards of the MATC program in order to help my own students reach their learning goals.
instruction and assessment, my student may not have reached her own learning goal of
segmenting words.
I plan for and differentiate my lessons based on content, process, product, ability, and
learning styles, so while in TE 808 I began to wonder why I did not differentiate my classroom
environment and seating for my students. During my second year of teaching first grade,
flexible seating became a collaborative initiative throughout the school I was teaching at. A
group of teachers worked together to learn about flexible seating options, how to initiate the
change for students and their families, and shared thoughts and ideas throughout the transition.
Through this flexible seating initiative and Artifact 2: Mini-Project Report: Flexible Seating, I
had the opportunity to “learn and work collaboratively with colleagues beyond the classroom”
Learning Goals 5
(MATC Goal 3). My personal learning goal for Artifact 2: Mini-Project Report: Flexible Seating
was to learn about what my students thought and felt about the classroom environment changes
and what they liked most and least about flexible seating. I thoughtfully chose these questions,
gathered data, analyzed the data, and then made assertions and conclusions about flexible
seating. Through Artifact 2: Mini-Project Report: Flexible Seating, I came to the conclusion
that, “what my students like most about flexible seating is that they are able to find a learning
space that is comfortable for them. Each student has their own way to get comfortable, and
flexible seating allows students to explore and find a space that is comfortable for them”
(Artifact 2, 2016, p. 4). I differentiate my instruction every day to support all of my students in
reaching the learning goals of each lesson. To add on to that, I differentiate the classroom
environment and seating in order to allow students to work in a learning space that is most
comfortable for them in order to learn and work their best. After completing Artifact 2: Mini-
Project Report: Flexible Seating, I was able to and am still able to “provide leadership in a
variety of ways among colleagues in their schools and communities” (MATC Standard 6) by
sharing what I learned with my colleagues, allowing them to observe flexible seating in my
Before this MATC program, my overall thinking was that learning goals were set for
reaching academic standards. Throughout my time in this program, my thinking has shifted to
understanding that learning goals can be set and explicitly taught for behavior as well. Behavior
management can be a daunting task that I have tried very hard to understand and find the “magic
key”. Before my first day of teaching, I read Harry Wong’s 1997 book The First Days of
School: How to Be an Effective Teacher and learned how to be firm, fair, and consistent with
behavior management starting on day one. Advice from veteran teachers was always the same:
Learning Goals 6
Be “tough”, firm, fair, and consistent starting on the first day. I tried to follow this advice as I
worked through whole group and individual behavior management. I tried clip charts, rewards,
individual behavior plans, read blogs and Jim Fay’s and David Funk’s 1995 book Teaching with
Love and Logic: Taking Control of the Classroom, yet I always had a few students who struggled
to reach their behavior goals and I struggled to know how to best support them. Since I am
“deeply committed to students as individuals, their diversity, their capacity to learn, and their
development as whole persons” (MATC Standard 1), I continued to seek behavior advice
throughout my time teaching. This is the main reason that I chose for one of my MATC
his/her professional practice” (MATC Goal 2). Through CEP 883, I was able to strengthen this
targeted area and learned how to be proactive with my classroom management and environment.
For Artifact 1: Classroom Management Elements PowerPoint I developed guidelines for success,
classroom rules/routines, and a class-wide behavior management plan. When I was planning for
the first week of my new classroom just this past school year, I looked back and printed out
Artifact 1: Classroom Management Elements PowerPoint. I utilized many of the ideas and
wording that I had thoughtfully planned out during the first week of school. Due to this, I have
seen a positive impact on student behavior in my classroom as we started out the year positively
As a teacher, I learned that I also had a learning goal to think about when dealing with
student behavior. In CEP 832, I wrote Artifact 4: ABC Project: Self-Management. Through this
artifact, I was able to learn how to support a student’s behavior through observation, data
analysis, and a behavioral strategy plan. I chose this class and student to work with to reach my
“personal goals to strengthen targeted areas of his/her professional practice” (MATC Goal 2). I
Learning Goals 7
had a vision to “create learning communities in their classrooms where positive, productive
relationships are formed, and differences are respected and embraced” (MATC Standard 1).
set one, specific behavioral goal for the day to focus on and we designed a behavior contract to
refer to. This student was working towards her behavior deficit of self-management skills. As
much as I learned about student behavior and how to support her self-management skills, I
“sustained reflection and reexamination of one’s beliefs, values, and practices” (MATC Goal 1)
and ended up learning more about my own self-management skills and professional stance. I had
not realized that my professional stance could impact student behavior so strongly. Creating a
goal and plan for myself was just as important as making a goal and plan for the students with
stance to be, and set goals to help me maintain an effective stance. A few ideas that I still use
today to maintain my effective stance are self-talk in my head, taking a deep breath when I feel
frustrated, and think about how this frustration is just a small part of the day and to not let it ruin
my day.
In CEP 800, I had the opportunity to reflect on myself as an educator and what I believe
and value in education. At the beginning of this course, I wrote Artifact 7: Revised Personal
classroom environment, and relationships. At the time, I thought that I had a firm understanding
of how I felt about each of these ideas. By the end of this course and after “deep, sustained
reflection and reexamination of one’s beliefs, values, and practices” (MATC Goal 1), my beliefs
Learning Goals 8
became more clear and concise and I had the confidence and data to back up my viewpoints. I
was “critically reflective…into their own beliefs, assumptions, and practices” (MATC Standard
4) throughout the course and as I revised Artifact 7: Revised Personal Theory of Learning. This
time for critical reflection made me think back to the multitude of learning goals I encountered
throughout my MATC program. Throughout all of my courses, the professors had learning goals
for me to learn about learning styles, depth of knowledge, observation and modeling,
learning that occurred as I was reading about, discussing, and working towards these learning
goals impacted Artifact 7: Revised Personal Theory of Learning. As I continue to learn about
and be exposed to different perspectives and viewpoints, my Personal Theory of Learning may
change again. Nonetheless, I can say with confidence that I have learned about so many ideas
and concepts throughout the MATC program and Artifact 7: Revised Personal Theory of
During TE 842, I learned a great deal about reading/reviewing professional literature and
literacy development. I completed Artifact 5: Professional Book Club Review: Words Their
Way, which was a book review of Words Their Way: Word Study for Phonics, Vocabulary, and
Spelling Instruction. This book discusses a word study approach that incorporates phonological
awareness, vocabulary, and decoding/sight-word knowledge. Through this book review, I was
able to “access, use, and evaluate information to enhance their professional understanding,
improve their practice, and share their knowledge with others” (MATC Standard 5). I chose to
read and review this piece of literature because I was interested in learning about, using, and
sharing with my colleagues the components of literacy discussed in the book. I learned a great
deal about student development, spelling stages, and best practices to support students. The
Learning Goals 9
book also provided many, appropriate learning goals for students based on where they were
developmentally. Additionally, I chose this book because my grade level was thinking about
implementing Words Their Way in our classrooms. I thought that this would be an excellent
way to reach my goal of being a teacher leader and share my knowledge with my grade level
team. After reading the book, I “engaged in critical inquiry in its many legitimate forms (e.g.,
In TE 848, I had the opportunity to use what I learned to develop a letter and rationale for
a curriculum council about factors of writing motivation in school and how to support students in
“College and Career Readiness (CCR) Anchor Standards”. Artifact 6: The Practitioner Project:
Motivation in Writing allowed me to “situate and analyze issues and problems of practice and
policy” (MATC Standard 3) and see how teachers can make “changes in local policy and
practice that will enhance both teachers’ and students’ learning" (MATC Goal 3). Writing this
artifact allowed me to work through the steps to make a change and gave me the confidence to
make a change in the future. While writing this artifact, I realized that when trying to make a
change I need to be very clear and concise with the goals that I want to change and the rationale
behind why there needs to be a change in the first place. This type of writing also involves
setting clear and concise goals for how the change could realistically happen and should provide
the teachers and staff with possible ideas, resources, and materials they could use. In my artifact
form, a motivating lesson plan, and mentor texts that educators could utilize to support their
students in being motivated to write and reach the CCR Anchor Standards. Educators have so
Learning Goals 10
many amazing ideas to share with the world and we should have the confidence to share
Throughout this program, I have worked towards the six MATC standards and three
MATC goals, and I can say with confidence that I am more reflective about and hold a better
my learning goals for this program was an immense accomplishment and I look forward to
continuously working towards new learning goals and supporting my students in reaching their
goals.