Professional Documents
Culture Documents
Design For Shear (Columns BS 8110)
Design For Shear (Columns BS 8110)
The design shear stress is calculated as follows (to be done parallel to each axis):
vi = Vi / Av,i
Where
IF
Then the section size is adequate for shear, and the links can be designed or checked.
A
BS 81101:1997 3.4.5.2
IF
vi ≤ vc’ and M/N ≤ 0.6* h1
Then the nominal containment reinforcement [(Asw / s)nominal] is adequate.
IF
vi ≤ vc’+ 0.4
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/All_Codes/Refere... 16/11/2017
Design for Shear (Columns: BS 8110) Page 2 of 2
Else
Where
fyv = characteristic strength of links (not to be taken more than 500 N/mm2)C
A
BS 81101:1997 Table 3.7
B
BS 81101:1997 Table 3.7
C
BS 81101:1997 3.4.5.1
Parent topic
• Column Design to BS 8110
Chapter
1. BS 81101:1997 3.8.4.6
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/All_Codes/Refere... 16/11/2017