Professional Documents
Culture Documents
Ijece Icrtecita P136
Ijece Icrtecita P136
Ijece Icrtecita P136
ABSTRACT I.INTRODUCTION
ARDUINO
Soil Moisture Sensor - The Soil Moisture
(Coordinator Node) Sensor (SMS) is
Soil Moisture
Sensor
Wi Fi a sensor connected to an irrigation
pH Sensor system controller that measures soil
moisture content in the active root
zone before each scheduled irrigation event
Figure 1: System Architecture
and bypasses the cycle if moisture is above a
IV. PROPOSED WORK user defined set point.
Arduino - An open source platform which
The block diagram of the proposed system consists of both a physical programming
as shown in Fig.2 consists of sensing unit circuit board (Micro controller) and a piece
such as Soil Moisture Sensor to measure of software (Integrated development
water content of soil. Environment).
GSM/GPRS module - Used to establish
communication between a computer and
a GSM/GPRS system.
Relay - Switches that open and close
circuits electronically and
eelectromagnetically. Control one electrical
circuit by opening and closing contacts in
another circuit.
Solenoid valve - An electromechanical
device used for controlling liquid or gas
flow. Controlled by electric current, which
is run through a coil. When the coil is
energized, a magnetic field is created,
causing a plunger inside the coil to
move.
V. REFERENCES