Professional Documents
Culture Documents
Bored Pile Capacity Is Final 08-01-18
Bored Pile Capacity Is Final 08-01-18
DEPTH CORRECTED
EFFECTIVE CORRECTE
N VALUE
OVER CORRECTED D N VALUE
AFTER
BURDEN FCTOR FOR AFTER
(g-1) CORRECTION
LAYER NO N VALUE PRESSURE OVERBURD CORRECTI
T / M3 FOR OVER
EN ON FOR
FROM TO BURDEN
( T / M PRESSURE DILATANCY
PRESSURE
2
) ( N '' )
(N')
VALUE APPROX
SL NO OF SPT VALUE
(N) OF f
1 1 25
2 5 28
3 10 31
4 15 33
5 20 34
6 25 36
7 30 37
8 35 38
9 40 39
10 45 40
11 50 41
12 55 42
13 60 43
14 65 44
15 70 44
N VALUE 33 37
PILE CAPACITY ( AS PER IS : 2911 ( PART I / SEC 2 )- 2010 ( ANNEX - B ))
10 15.00
FACTOR
DEPEND
S ON
SOIL
1.00 1
1.00 1
1.00 1
PILE CAPACITY ( AS PER IS : 2911 ( PART I / SEC 2 )-2010 ( ANNEX - B ))
Qu = R u + R f
Pd = Effective overburden pressure at pile tip limited to 20 times dia of pile for piles having length
Pdi = Effective overburden pressure in Kg/cm2 along the embedment of pile for the ith layer
d = Angle of wall friction between pile and soil in degrees. It may be taken equal to angle of
Asi = Surface area of pile shaft in cm2 in the ith layer, where i varies from 1 to n.
C = Average cohesion in Kg/cm2 throughout the embedded lenth of pile ( from uc-ud test )
Afactor
AS =p x due to
No of Thickness Effective Dia. Of
SL NO (l1) in m g g-1 a c (t/m2) Dia. of Siol
layers Thicness Pile(m)
pile x l1 Propert
ies
1.00 0.76 9.00 6.84 3.42 0.00 0.00 14.14 0.00 25.16
1.00 0.93 4.50 4.19 8.93 0.00 0.00 7.07 0.00 26.51
1.00 1.00 10.00 10.00 16.03 0.00 0.00 15.71 0.00 68.14
1.10 0.76 0.00 0.00 21.03 0.62 10.00 0.00 0.00 0.00
1.00 0.99 0.00 0.00 21.03 0.00 0.00 0.00 0.00 0.00
1.00 0.77 0.00 0.00 21.03 0.00 0.00 0.00 0.00 0.00
overburde Effectve
No of Effective Pdi
n Overburd (g-1)
layers Thicness
Thicness en Thk
Ap D y Ny Pd Nq Nc Cp
0.1963 0.50 1.00 0.00 5.70 0.00 9.00 10.10
Ap ( 1/2D.y.Ny ) = 0.00 TON. PUT MAXIMUM UNIT END
BEARING IN T / SQ M
Ap ( Pd.Nq ) = 0.00 TON.
Ap.Nc.Cp = 17.85 TON. 17.85 90.9 300 PUT THIS VALU
Ru = Ap ( 1/2D.y.Ny + Pd.Nq ) + Ap.Nc.Cp = 17.85 TON.
FACTOR OF SAFETY
Ru = ULTIMATE BASE RESISTANCE = 17.85 TON. 2.50
UPLIFT LOAD CARRYING CAPACITY = 30.88 TON. FACTOR 0.50 ( PUT THIS FACTOR)
Skin
friction
due to
cohesion(
T)
25.16
26.51
68.14
0.00
0.00
0.00
3.25
PUT MAXIMUM UNIT SKIN
10
FRICTION IN T / SQ M.
PUT THIS VALUE
CTOR)