Home Shop 18 Network is located in Noida and has 5 water-cooled chillers, an air-cooled chiller, cooling towers, and AHUs to provide cooling for an office building. Observations found the chiller pumps running at full load, belt-driven AHU fans in good condition but manually controlled, noise issues in AHUs, and a dirty cooling tower with uncontrolled fans. Proposed solutions include adding VFDs to chiller pumps and cooling tower fans, cleaning chillers, installing two-way valves in AHUs, and addressing vibration and noise issues. Estimated energy savings are 10%.
Home Shop 18 Network is located in Noida and has 5 water-cooled chillers, an air-cooled chiller, cooling towers, and AHUs to provide cooling for an office building. Observations found the chiller pumps running at full load, belt-driven AHU fans in good condition but manually controlled, noise issues in AHUs, and a dirty cooling tower with uncontrolled fans. Proposed solutions include adding VFDs to chiller pumps and cooling tower fans, cleaning chillers, installing two-way valves in AHUs, and addressing vibration and noise issues. Estimated energy savings are 10%.
Home Shop 18 Network is located in Noida and has 5 water-cooled chillers, an air-cooled chiller, cooling towers, and AHUs to provide cooling for an office building. Observations found the chiller pumps running at full load, belt-driven AHU fans in good condition but manually controlled, noise issues in AHUs, and a dirty cooling tower with uncontrolled fans. Proposed solutions include adding VFDs to chiller pumps and cooling tower fans, cleaning chillers, installing two-way valves in AHUs, and addressing vibration and noise issues. Estimated energy savings are 10%.
Home shop 18 network is located at 7th floor of building FC-24 in Noida. They are having air cooled as well as water cooled chillers, AHUs & Cooling towers. The utility installed is to cater the cooling load of the entire building. Equipment: S.NO. Equipment Quantity 1 Chillers 5 2 AHUs * 3 Cooling tower 2
Observation & Opportunity Points:
1. There are 4 water cooled chillers and one air cooled chiller. o The circulation pumps were running on full load. 2. AHUs o The fans of the AHUs were belt driven and the battery was in good condition. o All the operation in AHUs were manually controlled. o There was noise issue in AHUs. 3. Cooling Tower o The cooling tower was very dirty. o The fans of the cooling tower is not being regulated according to the load. Proposed solution: 1. The circulation pump of the chillers should be regulated using VFDs. 2. The fans of the cooling tower should be controlled using VFDs. 3. Clean the condenser and evaporator side of chiller. 4. Assembly of two-way valve in AHUs. 5. Problems due to vibration and noise (solution to be given by Peter sir when he’ll go back). Proposed Savings: The estimated savings is to be 10%.