Professional Documents
Culture Documents
This Section Is Only Applicable To The Lab Application
This Section Is Only Applicable To The Lab Application
The test set supports Service Option 33 (SO33) for high speed packet data transfer between a
wireless device and a packet switched network so that you can test the performance of data
applications such as music downloads, interactive and multimedia applications.
The test set provides two packet data service options: SO33 and SO33 (+ F-SCH) which are
available with the radio configurations 3 and above (see Service Option ). The forward and reverse
traffic channels associated with the selected service options that are supported by the test set are
different from the standard definition (see Channel Configurations for Packet Data Service
Options ).
SO33: A packet data connection with the SO33 service option selected will cause the test
set to establish the forward and reverse fundamental channels (F-FCH/R-FCH) for data
transfer and assign the F-SCH channel, or R-SCH channel, or both, dynamically based on
physical channel configuration.
SO33 (+ F-SCH): A packet data connection with the SO33 (+ F-SCH) service option selected
will cause the test set to establish the F-FCH/R-FCH channels and then establish the F-SCH
channel for high speed data transfer. The R-SCH channel is not available.
NOTE
In the real network, forward and reverse supplemental channels can be added to the fundamental
(traffic) channel to increase bandwidth. The supplemental channel is requested by the mobile
station when high speed operation is needed. The base station controls the duration of time that
the supplemental channel is granted.
Channel Configurations for Packet Data Service Options
NOTE:
a. The test set does not support SO33 (+ F-SCH) service option in radio configuration (Fwd5, Rvs4).
Service Option can't be changed during a packet data connection between SO33(+F-SCH)/SO33
and any other service options, the test set does not make service negotiation, but rejects the
service option change directly.
The actual data rate for the packet data transfer depends on the radio configuration and the
forward/reverse channels established (see Channel Configurations for Packet Data Service
Options ):
The F-FCH data rate is fixed to Full either at 9.6 kbps or 14.4 kbps. See F-FCH and F-SCH
Data Rates .
9.6 kbps 9.6 9.6 kbps 9.6 14.4 kbps 9.6 kbps 9.6
14.4kbps
(completo) kbps (completo) kbps (completo) (completo) kbps
9.6 kbps 9.6 9.6 kbps 9.6 14.4 kbps 9.6 kbps 9.6
14.4kbps
(completo) kbps (completo) kbps (completo) (completo) kbps
No puede establecer la velocidad de datos en 230,4 kbps cuando el Tipo de codificador R-SCH
(consulte "CALL: SCHannel: REVerse: ENCoder") es turbo y la Configuración de radio es (Fwd5,
Rvs4).
Las tarifas de datos de F-SCH / R-SCH pueden cambiarse mientras se mantiene una
conexión de datos. El conjunto de prueba informará a la estación móvil de la nueva
velocidad de datos con señalización, y esperará una respuesta de la estación
móvil. Cuando la estación móvil reconoce la nueva tasa, el conjunto de prueba cambiará la
velocidad de transmisión de datos por aire. Si la estación móvil no confirma la nueva
velocidad de datos, el conjunto de prueba mostrará, en cambio, un error que indica que la
estación móvil rechazó un cambio de velocidad de datos y la velocidad de datos no
cambiará.