This document provides instructions for creating an OR gate circuit or parallel circuit using a PLC training kit. The equipment needed includes a PLC S7 300 unit with a CPU 315 2 DP, power supply, and various input and output modules. The document is numbered page 1 of 3 and discusses creating OR gate and parallel circuits using rungs in the ladder logic diagram to connect inputs to outputs.
This document provides instructions for creating an OR gate circuit or parallel circuit using a PLC training kit. The equipment needed includes a PLC S7 300 unit with a CPU 315 2 DP, power supply, and various input and output modules. The document is numbered page 1 of 3 and discusses creating OR gate and parallel circuits using rungs in the ladder logic diagram to connect inputs to outputs.
This document provides instructions for creating an OR gate circuit or parallel circuit using a PLC training kit. The equipment needed includes a PLC S7 300 unit with a CPU 315 2 DP, power supply, and various input and output modules. The document is numbered page 1 of 3 and discusses creating OR gate and parallel circuits using rungs in the ladder logic diagram to connect inputs to outputs.
a) CPU 315 2 DP b) Power Supply PS 10A c) DI 32 x 24 DC d) DI 32 x 24 DC e) AI 4 x 12 Bit f) AO 2 x 12 Bit Membuat Rangkaian Gerbang Lembar Kerja No. 06 OR /Rangkaian Paralel
Kode : PLC. 06 Halaman:
2 Membuat Rangkaian Gerbang Lembar Kerja No. 06 OR /Rangkaian Paralel