Professional Documents
Culture Documents
7708 DAQ Card Datasheet
7708 DAQ Card Datasheet
Specifications
Capabilities
Channels 1–40 Multiplex one of 40 2-pole or one of 20 4-pole signals
into DMM.
Inputs
Maximum Signal Level
Channels (1–40) 300 V DC or rms, 1 A switched, 60 W, 125 VA
maximum.
Contact Life (typ.) >105 operations at max. signal level.
>108 operations no load1.
1. Open thermocouple detector on during thermocouple measurements. Minimum signal
level 10 mV, 10 µA.
Contact Resistance <2 Ω at end of contact life.
Contact Potential <±500 nV typical per contact, 1 µV max.
The 7708 plug-in module offers 40 channels of 2-pole or 20 <±500 nV typical per contact pair, 1 µV max.
channels of 4-pole multiplexer switching that can be configured as Offset Current <100 pA.
two independent banks of multiplexers. The built-in CJC sensors Connector Type Screw terminal, #20 AWG wire size.
automatically linearize thermocouples, making the 7708 ideal for Isolation Between Any Two Terminals
RTD, thermistor, and thermocouple temperature applications. >109 Ω, <200 pF.
It is also well suited for mixed-signal measurement applications Isolation Between Any Terminal and Earth
that require multi-point monitoring, such as environmental stress >109 Ω, <400 pF.
screening. Cross Talk (1 MHz, 50 Ω Load)
<–40 dB.
Key Features Insertion Loss (50 Ω Source, 50 Ω Load)
<0.1 dB below 1 MHz. <3 dB below 2 MHz.
• 40 differential channels for general purpose measurements Common Mode Voltage
• Two- or four-wire measurements 300 V between any terminal and chassis.
• 300 V, 1 A capacity for voltage channels; 60 W, 125 VA General
• Oversize screw terminal connection blocks are standard for 40 Channels 40 channels of 2-pole relay input. All channels
easier connection configurable to 4-pole.
• Relay closures stored in onboard memory Relay Type Latching electromechanical.
Actuation Time <3 ms.
HI
Environmental and Safety
Card Input Operating Environment: Specified for 0° to 50°C.
LO
Specified to 80% R.H. at 35°C.
HI Storage Environment: –25° to 65°C.
Card Sense
LO EMC: Conforms to European Union EMC Directive.
Safety: Conforms to European Union Low Voltage
Cold Junction
HI Directive
Ref ×4 Channel 1
LO
RoHS: Conforms to European Union RoHS Directive
Channel 43
(see Note) Weight 0.52 kg (1.16 lb).
(Channels 2–19) Backplane
HI
isolation
HI
Supplied Accessories
Channel 20 Input CC-92-1 Set of 20 Cable Ties
LO LO
TL-23 Screwdriver
Channel 4
12-Pole (Open)
4-Pole (Closed)
Channel 42
To
Instrument Available Accessories
(see Note) Backplane
(see Note) Backplane 7708-3Y-EW 1-year factory warranty extended to 3 years from date
Cold Junction isolation
Ref ×5 of shipment
HI HI
Channel 21
LO
Sense
LO Ordering Information
(Channels 22–39) 7708 40-channel Differential Multiplexer Module with
NOTE:
Channels 41 –43 in this schematic refer to Automatic CJC and Screw Terminals
the designations used for control and not
HI
actual available channels. Warranty 1 year
Channel 40
For more information, refer to the
LO ROUTe:MULTiple command section in the
Instrument User’s Manual.
Channels 42 and 43 can be individually
controlled using ROUTe:MULTiple if the
module is not to be connected to the
internal DMM.