Professional Documents
Culture Documents
Protek Catalog 2014
Protek Catalog 2014
Protek Catalog 2014
com
CONTENTS
Analyzer
06 Protek A338_4Ports 8GHz Vector Network Analyzer
08 Protek A338 8GHz Vector Network Analyzer
10 Protek A333 3.2GHz Vector Network Analyzer
12 Protek A434L 4GHz Cable & Antenna Analyzer
14 Protek A734 4.4GHz Handheld Spectrum Analyzer
16 Protek 7830+G632 2.9GHz Handheld Spectrum Analyzer
18 Protek 3201/3290N 2.0GHz/2.9GHz RF Field Strength Analyzer
Oscilloscope
22 Protek 5000 Series Digital Storage Oscilloscope
24 Protek 6500 Series Analog Oscilloscope
25 Protek 6502S Analog Oscilloscope with Multimeter Function
26 Protek 2090/2150/2250 PC Based DSO
27 Protek 1000 Series Handheld Scope-meter
Generator
30 Protek 9301/9302 Arbitrary & Function Generator
32 Protek 9300 Series Digital Synthesis Arbitrary Function Generator
36 Protek GD-0000N Series DDS Function Generator
37 Protek 9205A/9205C Sweep Function Generator
Meter
40 Protek D705T Digital Multimeter
42 Protek 506 Digital Multimeter
44 Protek 608 Digital Multimeter
46 Protek M733 RF Power Meter
48 Protek 9216A LCR Meter
50 Protek 4000 Bench Type Multimeter
52 Protek 305/307 Clamp Meter
Power Supply
54 Protek 3003/3005 SDT Series Power Supply
TEST
TEST & &
MEASURING
MEASURING
INSTRUMENTS
INSTRUMENTS History
2005
- World First Mobile WiMAX 60W AMP development
- TL9000 / ISO9001 Certification
1988
- IPO (Initial Public Offering) to
KOSPI (Korean Stock Market)
2008
- 3.2GHz Vector Network Analyzer
Development / Production
2011
- 8GHz Vector Network Analyzer
Development/ Production
Vector
Vector
4.4GHz
2.9GHz
2.0GHz/2.9GHz
Protek A338 Vector Network Analyzer 4 port version is not only fully inherited from
great features such as fast sweep time, frequency offset, and time domain of
Protek A333/A338 series but specialized in pursuing higher efficiency in the production
lines of passive components and R&D laboratories by adding more ports.
With a great demand on the smartphone production in the fast changing environments,
Protek A338 4port version provides best and affordable solutions for vendors.
Frequency Range : 100kHz ~ 8GHz, 16 Parameters support (S11 ~ S44)
Measurement time per point : 100us per point
Wide Output Power Range : -60dBm to +10dBm
Dynamic Range : >150dB (1Hz IF bandwidth)
Time domain and gating conversion included
Two Independent Signal Sources
Frequency offset mode, including vector mixer calibration measurements
Up to 16 logical channels with 16 traces each
Multiple precision calibration methods and automatic calibration
Up to 500,001 measurement points
Fixture simulation
COM/DCOM compatible for LabView and automation programming
Power Range 100 kHz to 6.0 GHz -60 dBm to +10 dBm
Trace Noise Magnitude From 100 kHz to 300 kHz: 5 mdB rms
(IF Bandwidth 3 KHz)
From 300 kHz to 8.0 GHz: 1 mdB rms
18 dB
8 18 dB
10 130 W
12 11.7 kg
are Succeded by
10.25 kg
238 mm
4GHz
Cable & Antenna Analyzer
+25
4.4GHz
250
Att
Ref. level
Ref. level
Ref. level
Att
marker-center frequency
Ohm
1.6 kg
Ohm
2.9GHz
2.0GHz/2.9GHz
TEST
TEST & &
MEASURING
MEASURING
INSTRUMENTS
INSTRUMENTS Oscilloscope
Digital Storage Oscilloscope
Analog Oscilloscope
6502S
PC Based DSO
2090/2150/2250
The digital storage oscilloscopes of Protek 5000 series are six models; 5020, 5071, 5100,
5200, 5202 and 5302 which operates at 25, 70, 100, 200 and 300MHz bandwidth with
different real-time sampling rate respectively. Auto measurement, FFT split screen
functions, and useful PC interfaces with 7 inch clear LCD display provide a variety of
convenient options with great value to users in every application.
22
23
Features
Protek 5020 Protek 5100 Protek 5200 Protek 5071 Protek 5202 Protek 5302
1 Specifi- Bandwidth 25 MHz 100 MHz 200 MHz 70 MHz 200 MHz 300 MHz
Specification cations
Channels 2CH+1EXT
Scan 100ms-50s/div
Polarity NORMAL/INVERT
Type Edge,Pulse,Video,Slope,Alternative
Interface Classical,Modern,Traditional,Succinct
Dimension / Weight 323.1 x 135.1 x 157 mm(L*W*H) 2.5kg 358 x 156 x 118 mm(L*W*H) 4.3Kg
Features
2 Channels 4 Traces
X-Y Operation
12KV CRT(6504, 6506, 6510) / 1.9KV CRT(6502)
X10 Magnifier(6504, 6506, 6510) / X5 Magnifier(6502)
2 Horizontal Deflection
Sweep Mode A, XY, ALT, MAG, X5 MAG A, XY, ALT, MAG, X10 MAG
3 X-Y Operation
4 General
Features
20MHz Bandwidth
Bandwidth DC : 500kHz
4 Digital Multimeter Mode DC/ACV, DC/AC µa, DC/AC mA, DC/AC A, Ω, Diode, Hz, Capacitance, Temp
Display 4000count
Features
5 Channels 2 Channels
7 DC Accuracy ±3%
11 Impedance 1M ohm
18 Autoset Yes
21 Measurements Vp-p, Vmax, Vmin, Vmean, Vrms, Vamp, Vhigh, Vlow, Positive Overshoot, Negative Overshoot, Cycle Mean, Cycle rms, Period,
Frequency, Positive Pulse Width, Negative Pulse Width, Rise Time(10% to 90%), Fall Time(10% to 90%), Positive Duty Cycle,
Negative Duty Cycle
22 Cursor Time/ Frequency Difference, Voltage Difference Frequency Only in FFT Mode
25 Interface USB
30 Grid On/Off
OLE(Object Linking and Embedding) Automation : Data Generation For Microsoft Excel
27
Setting Save/Load
Features
1 Vertical Channel 2
Specification
Bandwidth 60 MHz 200 MHz
Mode Edge, Pulse Width, Alternative Edge, Video, Pulse Width, Alternative
5 Cursors and Voltage Measurement Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot
Measurement
Time Measurement Frequency, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Waveform Signal Process CH 1+/- CH2, CH1 x CH2, CH1/CH2, FFT, Invert
DMM Testing Modes Votage, Currnet, Resistance, Capacitance, Diode & Continuity
Input Inpendance 10 M©
9 Power Source Line Voltage Range AC 100V ~ 240V, 50 Hz ~ 60 Hz; DC Input : 8.5 VDC, 1500 mA
Weight 1.2 kg
TEST &
MEASURING
INSTRUMENTS Generator
Arbitrary & Function Generator
9301/9302
9205A/9205C
Features
Generator
Arbitrary &
Function Generator
TEST &
MEASURING
INSTRUMENTS
Sine, Square, Triangle, Ramp, Noise, Arbitary Sine, Square, Triangle, Ramp, Noise, Arbitary
Sine, Square, Triangle, Ramp, Noise, Arbitary Sine, Square, Triangle, Ramp, Noise, Arbitary
30
31
Protek 9302
Arbitrary & Function Generator 31MHz
Arbitrary Generator Outputs
Waveforms From 2CH (Protek 9302)
Adopted In Various Fields
Wave
Square
AWC Software Windows 95, 98, 2000, NT, ME Asymmetry <1% of Period +4 ns
AWC Function Sine, Square, Triangle, Ramp, DC, Noise, Overshoot <5%
Damped Sine, Exponential Rise, Exponential Fail,
Rise/Fall Time 35 ns
Wave
Arbitrary
Free Hand, Line
Waveform Length 16 to 16, 383 Points Linearity 0.5% of Full Scale Output
Amplitude Resolution 12 bits Modulation Characteristics Specifications
Sampling Rate 40 M Samples/sec Source Internal(Sine, Square, Triangle, Ramp or Arbitrary) or External
Modulation
Amplitude
Accuracy ±1.5% of Setting +0.5mV (DC Only) Frequency 2 MHz to Sine, Square, Triangle, Ramp
Amplitude Range ±80 mV Depending On AC And DC Settings Count 1 to 65,000 Cycles/Burst
0.05Vp-p to 10Vp-p Into 50Ω
Phase Shift ≤100 kHz
1. Sine Wave Amplitude Accuracy ( 0 V DC Offset) Type Linear or Log
Sweep
Frequency
0.01µHz 100KHz 20MHz CH2 : INT Ch1, INT Rate, POS EXT2, NEG EXT2
~100KHz ~20MHz ~31MHz Rate 0.0001s ~ 999.99s
5-10Vpp ±3% ±6% ±15% External Input ±Edge, TTL Input
0.05-5Vpp ±5% ±8% ±16% Output TTL Output
3. Triangle, Ramp, Arbitary Amplitude Accuracy Accuracy ±3 ppm(20°C to 30°C)
0.01µHz~100KHz 100KHz~2MHz Aging ±3 ppm/Year
5-10Vpp ±4% ±8% Input 10MHz/N ±2ppm, N=1 to 8, 1Vp-p Minimum Input Level
0.05-5Vpp ±5% ±9% Output 10MHz, >1 Vp-p Sine Into 50Ω
Sine Wave Spectral Purity Specifications Operating Temperature 5°C to 40°C
Spurious Components DC to 2MHz : <-65dBc(Non-Harmonic) Operating Humidity 35% to 80%
2MHz to 31MHz : <-65dBc+6dBc/Octave(Non-Harmonic) Weight Protek 9301 : 8.2 kg, Protek 9302 : 8.7 kg
Subharmonic <-50dBc (Sine, 5Vpp) Dimensions 363mm(W) x 109mm(H) x 386mm(D)
Harmonic Distortion : Harmonically Related Signals Will Be Less Than Interfaces RS-232 (2400 to 19,200 bps) and GPIB (Optional)
DC to 1 MHz (Sine, 1Vpp) : <-45dBc Power Supply 100/ 120/ 220/ 230 VAC(±10%) 50/ 60 Hz
1 MHz to 31 MHz (Sine, 1Vpp) : <-32dBc Power Consumption Protek 9301 : 46W, Protek 9302 : 80W
Features
Generator
Digital Synthesis Arbitrary
Function Generator
TEST &
MEASURING
INSTRUMENTS
The Protek 9300 series are six digital synthesis arbitrary function generators based on
DDS (Direct Digital Synthesis); 9305, 9310, 9320, 9340, 9380, 93120, which can output
not only basic waveforms but arbitrary waveforms and modulated waveforms with
high resolution such as AM, FM, FSK, PSK, sweep, burst. Protek 9300 series are widely
used by electronic engineers in laboratories, production lines, education industries.
Frequency Measurement
Specification 1 Frequency Range 1Hz ~ 100MHz
(Counter) 2 Min. Input ATT Opened 50mV (Freq 10Hz ~ 50MHz), 100mV (Freq 1Hz ~ 100MHz)
Voltage
ATT Closed 0.5V (Freq 10Hz ~ 50MHz), 1V (Freq 1Hz ~ 100MHz)
32
>> Sine Wave: 2V, 10kHz >> Square Wave: 2V, 10kHz
1 Set the sine wave output of 9300 1 Set the sine wave output of 9300
Power Voltage : Min 1mV ~ Max 20V Power Voltage : Min 1mV ~ Max 20V
Frequency : Min 100µHz ~ Max 120MHz Frequency : Min 100µHz ~ Max 120MHz
2 Input the signal on DSO and Process the 2 Input the signal on DSO and Process the
auto key a time auto key a time
3 Check the output signal of 9300 3 Check the output signal of 9300
>> Triangle Wave: 2V, 10kHz >> Ramp Wave: 2V, 10kHz
1 Set the sine wave output of 9300 1 Set the sine wave output of 9300
Power Voltage : Min 1mV ~ Max 20V Power Voltage : Min 1mV ~ Max 20V
Frequency : Min 100µHz ~ Max 120MHz Frequency : Min 100µHz ~ Max 120MHz
34
2 Input the signal on DSO and Process the 2 Input the signal on DSO and Process the
auto key a time auto key a time
3 Check the output signal of 9300 3 Check the output signal of 9300
35
Output Waveform 5 (Pulse) Output Waveform 6 (Arbitrary)
Various
Waveforms
>> Pulse Wave: 2V, 10kHz >> Arbitrary Wave: 27, Stair
1 Set the sine wave output of 9300 1 Set the arbitrary wave output of 9300
Power Voltage : Min 1mV ~ Max 20V (1 ~ 27)
Frequency : Min 100µHz ~ Max 120MHz 2 Input the signal on DSO and Process the
2 Input the signal on DSO and Process the auto key a time
auto key a time 3 Check the output signal of 9300
3 Check the output signal of 9300
>> FM Modulation Used By Sine Wave >> AM Modulation Used By Sine Wave
1 Set the sine wave output of 9300 1 Set the sine wave output of 9300
2 Set the FM modulation function 2 Set the AM modulation function
(DEVIR, FREQ, WAVE, SOURCE) (LEVEL, FREQ, WAVE, SOURCE)
3 Check the output signal of 9300 3 Check the output signal of 9300
through DSO display through DSO display
>> Sweep Modulation Used By Sine Wave >> Burst Modulation Used By Sine Wave
1 Set the sine wave output of 9300 1 Set the sine wave output of 9300
2 Set the Sweep modulation function 2 Set the Burst modulation function
(MODE, START-F, STOP-F, TIME, TRIG) (TRIG, COUNT, SPACE-T, PHASE)
3 Check the output signal of 9300 3 Check the output signal of 9300
through DSO display through DSO display
>> FSK Modulation Used By Sine Wave >> PSK Modulation Used By Sine Wave
1 Set the sine wave output of 9300 1 Set the sine wave output of 9300
2 Set the FSK modulation function 2 Set the PSK modulation function
(START-F, STOP-F, SPACE-T, TRIG) (P1, P2, SPACE-T, TRIG)
3 Check the output signal of 9300 3 Check the output signal of 9300
through DSO display through DSO display
DDS Function Generator
Features
1 Waveform Sine, Triangle, Square, Rising Slope, Declining Slope, Random Noise, SIN(x)/x,
Rising/Drop Exponent, Pulse Waveform
Specification
2 Frequency Sine 1µHz ~ 5MHz 1µHz ~ 10MHz 1µHz ~ 20MHz
Duty Modulus 0.1% ~ 99.9 (<10kHz) / 1% ~ 99% (10kHz ~ 100kHz) / 3% ~ 97% (<1MHz)
0.5mVpp ~ 10Vpp(50Ω)
Impedance 50Ω
AM Depth 0% ~ 100%
Source Inner
Source Inner
Features
2 Sine Wave Flatness Better Than ±3dB ~ 2MHz at Max. Output ±3dB ~ 3MHz
Symmetry Variation 1:1 ~ 4:1 1:1 ~ 4:1 (1MHz)/ 1:1 ~ 2.1 (2.5NHz)
Accuracy 0.01%±1Count
LCR Meter
Bench Type
Clamp Meter
40 41
Digital Multimeter
42
43
2
Resolution 0.01H
Resolution 1 sec
Accuracy 0.2% + 1d
12
13
14
15
16
17
18 Dimension 88 x 37 x 199 mm
Protek 9216A is a useful tool measuring a device characteristics with various functions.
It has more than 13 orders of magnitude, basic accuracy of 0.05% and 5 test frequencies.
Standard Accessories
3 Averaging 2 ~ 10 Measurement
11 Triggering Through External Trigger, Continuous, Manual or Remote over RS232 interface
12 Bias Voltage Internal ==> 2.0VDC ±2% External ==> 0 to +40VDC (fused@0.25A)
2 5
1 6
7 11
8 10
9
This bias mode is used only for capacitance Correcting mistakes when entering numeric
measurements. If you press these buttons data, dan also serves as the ‘LOCAL’ function.
incorrectly, the error message ‘bias for c’ is
displayed.
INT: Internal button selests a 2.0VDC Internal bias
EXT: It can select an external bias mode(0V~40V)
Bench Type Multimeter
50
51
44 45
Clamp Meter
52
53
2
10
11
12
13
14
15
16
17
18
19
20
21
54 55
Specifications and other information shown on this product catalogue are subject to change without notice.
Head Office
GS Instruments Co.,Ltd.
©Copyright GS Instruments Co.,Ltd. All Rights Reserved.
China Factory
HCQ Electronics Co.,Ltd.
Danshan Industrial Park, Chengyang District,
Qingdo, Shangdong, China
Tel +86-532-6691-3900
Fax +86-532-6691-0908
www.gsinstrument.com