Professional Documents
Culture Documents
A + A - B + B - Operation
A + A - B + B - Operation
PNEUMATICS
A+A–B+B–
Machine Operation
Idle State:
MACHINE OPERATED:
DISCUSSION
OPERATION:
extend and will hit the X2 idle switch. Then it will trigger the retract of the 1st cylinder and
will hit the idle return switch X1. Then it will trigger the extend of the 2nd cylinder then will
hit the idle switch X4 then the 2nd cylinder will retract and hit the idle return switch X3
then the 1st cylinder will extend and the operation will repeat.
FLOW OF DIAGRAM
(The flow of diagram are the same with the other reports the difference is the operation.)
This machine operations works when an air pressure flows through 2 push
buttons which are START and STOP. And is connected to a 3/2 way valve. The 3/2 way
valve control signal to the cylinder which means the air pressure will pass if the START
button is pressed then the air pressure will flow to the 4/2 way valve which is connected
to the extend retract of the cylinder the operation will be performed. The STOP button will
move the air pressure to be released on the atmosphere triggering the stoppage of the
flow or control signal of the air then the operation will stop retaining its last state.