Professional Documents
Culture Documents
Motion Sensors
Motion Sensors
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
■ Overview ■ Application
The MFA 4p detects changes in the motion and speed of rotat-
ing, reciprocating or conveying equipment. It warns of equip-
ment malfunction and signals through contacts to shut down ma-
chinery in case of a slowdown or failure. Its reliability makes it a
cost-effective way to protect valuable process equipment.
The single setpoint system suits most industrial applications.
This versatile unit can be used on tail pulley shafts, driven pul-
leys, motor shaft sensing, belt or drag conveyors, screw con-
veyor flights, bucket elevators, fans and pumps.
A special feature is the adjustable 0 to 60 second time delay,
allowing the monitored device to accelerate to normal running
speed before monitoring begins. A wide range of probes are
available to suit specific needs, including high temperatures and
corrosive installations. The CE approval allows the MFA 4p to
consistently meet the needs of the mining aggregate, cement
and other primary and secondary industries.
• Key Applications: tail pulleys, motor shaft sensing, screw
conveyor flights, bucket elevators
MFA 4p motion failure alarm controller is a highly sensitive single
setpoint motion sensor system, used with Milltronics MSP
probes.
■ Benefits
• Up to 100 mm (4 inch) gap between target and probe
• Switch selectable overspeed or underspeed detection
• Setpoint adjustment 0.15 to 3 000 PPM (pulses/minute)
•
•
Adjustable start-up time delay
Visual indication of probe operation and relay status
6
• General purpose, suitable for majority of industrial applica-
tions; rugged probe designs provide unmatched reliability
■ Design
Mounting for Milltronics MSP-12, MSP-3, XPP-5
95 (3.75) dia.
Probe clearance hole 6 (0.25) dia. Hole for 1/4-20 bolt
or drill and tap on 114 (4.5) BCD,
2" NPSL 4 places
25 (1)
95 (3.75) dia.
Probe clearance hole
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
■ Technical specifications
Mode of operation Dynamic Range 0 ... 7 200 PPM
Measuring principle Motion monitor and alarm Ambient Temperature Range -20 ... +50 °C (-5 ... +122 °F)
Typical application Monitoring loss of motion in tail pulley, Design
screw flights, bucket elevators
Enclosure rating Type 4X/NEMA 4X/IP65 (standard
Features • Switch selectable overspeed or un- and optional stainless steel)
derspeed detection Type 4/NEMA 4/IP65 (optional mild
• Setpoint adjustment: steel)
0.15 ... 3 000 PPM
• Adjustable start-up time delay: Enclosure dimensions 160 x 240 x 82 mm
0 ... 60 seconds (6.3 x 9.5 x 3.2 inch)
• Visual indication of probe operation Optional: mild steel or 304 (1.4301)
and relay status stainless steel
Output 2 relays working in unison, each pro- 203 x 254 x 102 mm (8 x 10 x 4 inch)
viding 1 SPDT Form C relay contact,
rated 8 A at 250 V AC resistive Enclosure material Polycarbonate
Performance Optional: mild steel or stainless steel
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
Selection and Ordering data Article No. Selection and Ordering data Article No.
MFA 4P Motion Failure Alarm Controller 7MH7144- Milltronics RMA Remote Mounted Amplifier 7MH7145-
A highly sensitive single setpoint motion sensor 7777 Remote mounted amplifier for Milltronics MSP-3 07
system, used with MSP probes. and MSP-9 motion sensing probes.
Click on the Article No. for the online configura- Click on the Article No. for the online configura-
tion in the PIA Life Cycle Portal. tion in the PIA Life Cycle Portal.
Enclosure Enclosure
NEMA 4X, polycarbonate enclosure 1 Aluminum enclosure, IP65, Type/NEMA 4X, A
NEMA 4, painted mild steel enclosure 2 ½" NPT entry
NEMA 4X, 304 (1.4301) stainless steel enclosure 3 Painted steel, Type/NEMA 4, IP65 rating C
304 (1.4301) stainless steel enclosure, D
Input Voltage Type/NEMA 4X, IP65 rating
100/115/200/230 V AC, 50/60 Hz, switch selectable A
Speed detection version Selection and Ordering data Order code
Standard, underspeed (U/S) or overspeed (O/S), A Further designs
switch selectable
Slow speed (S/S), U/S or O/S detection, B Please add "-Z" to Article No. and specify Order
switch selectable (limit of 15 ppm) code(s).
6
(2.7 x 1.97 inch)]: Measuring-point number/ as a separate item on the order.
identification (max. 27 characters), All literature is available to download for free, in a
specify in plain text range of languages, at http://www.siemens.com/
Painted mild steel, heated enclosure with A35 processinstrumentation/documentation
viewing window for use down to -50 °C (-58 ºF) This device is shipped with the Siemens Level and
(finished unit is mounted inside enclosure) Weighing manual DVD containing the complete
483 x 584 x 203 mm (19 x 23 x 8 inch) operating instructions library.
Stainless steel, sun/weather shield S50 Spare Parts
(finished unit is field mounted inside enclosure)
Card, RMA 7MH7723-1DT
[357 x 305 x 203 mm (14 x 12 x 8 inch)]
Operating Instructions Article No. We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
English A5E33988839
German 7ML1998-5FM31
Note: The operating instructions should be ordered
as a separate item on the order.
All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
This device is shipped with the Siemens Level and
Weighing manual DVD containing the complete
operating instructions library.
Spare Parts
Relay 7MH7723-1DW
Transformer 7MH7723-1DX
Circuit Card, standard 7MH7723-1DU
Circuit Card, Slow speed 7MH7723-1DV
Lid with overlay for MFA 4p 7MH7723-1GY
We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
Selection and Ordering data Article No. Selection and Ordering data Order code
Milltronics Motion Sensing Probes 7MH7146- Further designs
A series of motion sensing probes used with the 777 Please add "-Z" to Article No. and specify Order
MFA 4p. code(s).
Milltronics MSP-3: heavy-duty, high temperature
aluminum Total cable length: enter the total cable length in Y01
Milltronics MSP-9: heavy-duty, high temperature plain text description
stainless steel Acrylic coated, stainless steel tag Y17
Milltronics MSP-12: heavy-duty, general purpose [13 x 45 mm (0.5 x 1.75 inch)]:
Milltronics XPP-5: hazardous rated Measuring-point number/identification
Note: Milltronics MSP-3 and MSP-9 probes require (max. 16 characters), specify in plain text
the use of Milltronics RMA (amplifier) Cable gland kit A57
Click on the Article No. for the online configura- Manufacturer’s test certificate: According to C11
tion in the PIA Life Cycle Portal. EN 10204-2.2
Cable Length Operating Instructions Article No.
Standard length (as described in Model options)1) 0
English A5E33988839
Add Order code Y01 and plain text:
"Total cable length ... m" German 7ML1998-5FM31
Extended cable length 2 ... 30 m (6.6 ... 98.4 ft)2) 1 Note: The operating instructions should be ordered
Extended cable length 31 ... 50 m 2 as a separate item on the order.
(101.7 ... 164 ft)4) All literature is available to download for free, in a
Extended cable length 51 ... 100 m 3 range of languages, at http://www.siemens.com/
(167.3 ... 328.1 ft)4) processinstrumentation/documentation
This device is shipped with the Siemens Level and
Model [standard cable length/type]
Weighing manual DVD containing the complete
MSP-3, ½" NPT cable inlet3) B operating instructions library.
[1.5 m (5 ft) high temperature cable]
MSP-9 [1.5 m (5 ft) high temperature cable]3) 4) D Spare Parts
MSP-12, ½" NPT cable inlet E Locknut, for MSP-3, MSP-7, MSP-12, XPP-5 7MH7723-1CR
XPP-5 [1.5 m (5 ft) cable, (CSA Class I, G Mounting flange, for MSP-3, MSP-7, MSP-12, XPP-5 7MH7723-1CS
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
■ Dimensional drawings
Type 4X/NEMA 4X/IP65 Polycarbonate Enclosure Type 4/NEMA 4/IP65 Painted Steel Enclosure &
Type 4X/NEMA 4X/IP65 Stainless Steel Enclosure
19 (0.75)
places
254 (10.0)
273 (10.75)
240 (9.455)
228 (8.975)
19 (0.75)
Ø8 (0.31)
178 (7.0)
Lid
Suitable location for 227 (8.94)
conduit entrances. Enclosure
(0.37)
¾" NPT 143 (5.63)
9.4
2" NPSL Cable
SJOOW-
5)
Mounting flange
37
18-3
(1.62)
41.2
(2.
Locknut
60
Probe body
Gasket Probe body
(potted aluminum Nameplate
junction box)
12
7 (5) Probe body (potted
171.5 (6.75)
5)
aluminum housing)
(3. 6
18
nominal
37
8
7 (7.
37
5)
Cap c/w 1/2" NPT 2" NSPL
conduit entrance Locknut
Mounting
flange
Process Protection
Motion sensors
Milltronics MFA 4p motion failure alarm controller
2" NPSL
5)
Mounting flange
37
(2.
Locknut 89
(3.
60
Probe body 5 )
Gasket
1/2" NPT
tapped
102 (4)
12
7 (5) both sides
5)
(3. 6
18
37
8
7 (7.
37
5)
Mo 1
un 65 (6 111 5) ters
t in
g c . 5) 37 n
Cap c/w 1/2" NPT en (4. ng ce
t i )
conduit entrance
te r un 5. 5
s Mo 0(
14
Ø 8 (0.312)
4 holes
(4.375)
6
111
17
8 ( 7)
15 s
Cap c/w Ø22
17
1(
2(
6) 4) te r
6.7 2 ( en
(0.875) hole 19
1( 5) 10 ting c
7.5 un 6)
) Mo 2(
15
Ø8 (0.312)
4 holes
Process Protection
Motion sensors
Milltronics MSP-7 motion sensor
■ Overview ■ Application
The MSP-7 motion sensing probe can detect changes in the
rotation and movement of ferrous equipment. When connected
to a PLC it can warn of malfunction and signals to stop or slow
down equipment, preventing costly failure or downtime. Its reli-
ability makes it a very cost effective sensor.
The single setpoint system suits most industrial applications.
This versatile unit can be used on tail pulley shafts, driven pul-
leys, motor shaft sensing, belt or drag conveyors,
screw conveyor flights, bucket elevators, fans and pumps.
An NPN open collector 3-wire output allows for versatile connec-
tion to most PLC models and a large dynamic range ensures that
the MSP-7 can detect changes in target speed for a variety of
applications.
• Key Applications: tail pulleys, motor shaft sensing,
screw conveyor flights, bucket elevators
■ Benefits
• Up to 100 mm (4 inch) gap between target and probe
• Corrosion resistant construction
• General purpose, suitable for majority of industrial applica-
tions; rugged probe designs provide unmatched reliability
6
■ Design
Mounting for Milltronics MSP-7
■ Technical specifications
Mode of operation Performance
Measuring principle Magnetic Repeatability ±1%
Typical application Monitoring loss of motion in tail pulley, Dead band ± 0.25 %
screw flights, bucket elevators
Dynamic Range 0 ... 7 200 PPM
Features • Rugged corrosion resistant alumi-
num body Ambient Temperature Range -40 ... +60 °C (-40 ... +140 °F)
• Low voltage operation Design
• Large dynamic range
• Threaded body for finite adjustment Enclosure rating Type 4X/NEMA 4X/IP67
Output NPN open collector Power Supply 21 ... 28 V DC, 40 mA max.
Certificates and approvals CE, RCM
Process Protection
Motion sensors
Milltronics MSP-7 motion sensor
Selection and Ordering data Article No. Selection and Ordering data Order code
Milltronics Motion Sensing Probes 7MH7146- Further designs
Milltronics MSP-7: heavy-duty, 3 wire stand alone 777 Please add "-Z" to Article No. and specify Order
code(s).
Click on the Article No. for the online configura-
tion in the PIA Life Cycle Portal. Total cable length: enter the total cable length in Y01
plain text description
Cable Length
Standard length (as described in Model options)1) 0 Acrylic coated, stainless steel tag Y17
Add Order code Y01 and plain text: [13 x 45 mm (0.5 x 1.75 inch)]:
"Total cable length ... m" Measuring-point number/identification
(max. 16 characters), specify in plain text
Extended cable length 2 ... 30 m (6.6 ... 98.4 ft) 1
Cable gland kit A57
Model [standard cable length/type]
Manufacturer’s test certificate: According to C11
MSP-7, ½" NPT cable inlet [1.5 m (5 ft) cable] K EN 10204-2.2
Approvals Operating Instructions Article No.
CE, RCM A
English A5E34105798
1)
No Y01 needed in Order code for standard length
Note: The operating instructions should be ordered
as a separate item on the order.
We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix. All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
This device is shipped with the Siemens Level and
Weighing manual DVD containing the complete
operating instructions library.
Spare Parts
Locknut, for MSP-3, MSP-7, MSP-12, XPP-5 7MH7723-1CR
Mounting flange, for MSP-3, MSP-7, MSP-12, XPP-5 7MH7723-1CS
Lid, 1/2" NPT cable inlet for MSP-3, MSP-7, MSP-12 7MH7723-1CU
6 Lid gasket, for MSP-7, MSP-12 7MH7723-1CX
Motion cable gland adaptor kit 7MH7723-1JU
We can offer shorter delivery times for configurations designated with the
Quick Ship Symbol . For details see page 9/5 in the appendix.
■ Dimensional drawings
Stand alone probe Milltronics MSP-7
RED
Vsup 24V DC
2" NPSL BLACK
- Supply Input
5)
Mounting flange
37
CLEAR
Sig.
(2.
Locknut
60
Probe body
SHIELD
Gasket
12
7 (5)
5)
(3. 6
18
37
8
7 (7.
37
5)
Cap c/w 1/2" NPT
conduit entrance
Process Protection
Motion sensors
SITRANS WM100 motion sensor
■ Overview
Process Protection
Motion sensors
SITRANS WM100 motion sensor
Selection and Ordering data Article No. Selection and Ordering data Order code
SITRANS WM100 7MH7158 - Further designs
A heavy-duty zero-speed alarm switch that does 0 7A 0 0 Please add "-Z" to Article No. and specify Order
not require a controller. code(s).
Click on the Article No. for the online configura- Manufacturer's Test Certificate: According to C11
tion in the PIA Life Cycle Portal. EN 10204-2.2
Model Acrylic coated, stainless steel tag [13 x 45 mm Y17
115 V AC A (0.5 x 1.75 inch)]: Measuring-point number/
230 V AC B identification (max. 16 characters),
specify in plain text
Operating Instructions Article No.
English 7ML1998-5MW01
German 7ML1998-5MW31
Note: The operating instructions should be ordered
as a separate item on the order.
All literature is available to download for free, in a
range of languages, at http://www.siemens.com/
processinstrumentation/documentation
This device is shipped with the Siemens Level and
Weighing manual DVD containing the complete
operating instructions library.
Locknut 7MH7723-1CR
Mounting flange 7MH7723-1CS
Motion cable gland adaptor kit 7MH7723-1JN
■ Dimensional drawings
6 Dimensions Detail A
226 (8.90)
Circuit Cap, 197 (7.76)
133 (5.25)
card aluminum 127 (5.00)
o.d.
60 (2.38)
Mounting
10...32 Locknut, 2" NPSL,
screw x 4 plated aluminum 6 dia. hole for
3/4" NPT Cap gasket, Casing gasket, probe body 1/4...20 bolt or drill
Conduit neoprene neoprene and tap on 114 (4.5)
entrance BCD, 4 places
Casing, Mounting flange,
aluminum see detail A
95 (3.75) dia.
probe clearance
hole
Process Protection
Motion sensors
SITRANS WM100 motion sensor
■ Schematics
Detection Terminal block
indicator LED for customer
connection
Terminal
circuit card
Note 3
Note 2
Note 1
1TB
8 7 5 4 3 2 1
5SEC/
12PPM
L2/N
L1
NC
COM
NO
115/230 VAC
50/60 HZ 2.5 VA
Ground terminal
for customer
connection